Titanium alloys as implant materials

ASTM Special Technical Publication

Volumn 1272, Issue , 1996, Pages 3-16

  Imam, M Ashraf ^a   Fraker, Anna C ^b  

^a NAVAL RESEARCH LABORATORY   (United States)

^b NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

Author keywords

Beta titanium alloys; Corrosion; Heat treatment; Implant metals; Mechanical properties; Microstructures; Titanium; Titanium alloys

Indexed keywords

ALLOYING; BIOCOMPATIBILITY; COMPOSITION; CORROSION RESISTANCE; DENTAL PROSTHESES; ELASTIC MODULI; HEAT TREATMENT; IMPLANTS (SURGICAL); MECHANICAL PROPERTIES; MICROSTRUCTURE; ORTHOPEDICS;

BETA TITANIUM ALLOYS; IMPLANT METALS; SIMULATED PHYSIOLOGICAL SOLUTION; STRENGTH TO WEIGHT RATIO;

TITANIUM ALLOYS;

EID: 0030148259     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp16066s     Document Type: Article

References (31)

1. Zwicker, U. and H. J. Schmidt, Advances in Hip and Knee-Joint Technology, Springer Verlag, 1976, pp. 257-272.
2. Borowy, K. H. and Kramer, K. H., "On the Properties of a New Titanium Alloy (Ti-5Al-2.5Fe), As Implant material", Proceedings of the 5th Intl. Conf. on Ti, Titanium Science and Technology, Eds. G. Lutjering, U. Zwicker and W. Bunk, 1984, p. 1381.
3. Collings, E. W., The Physical Metallurgy of Titanium, American Society for Metals, Metals Park, OH, 1984.
4. Van Loon, J. C., Encyclopedia Americana, Grolier Vol. 26, 1984, p.785.
5. Titanium Alloys in Surgical Implants, ASTM STP 796, H. A. Luckey and Fred Kubli, Jr., Eds., American Society for Testing and Materials, Philadelphia, PA, 1983.
6. Fraker, A. C., ASM Metals Handbook, Corrosion, Ninth Edition, ASM, Materials Park, OH, Vol. 13, 1986, pp. 1324-1335.
7. Froes, F. H. and Bomberger, H. B., Journal of Metals, 1985, p. 28.
8. Duerig and Williams, J. C., "Microstructure and Properties of Beta Titanium Alloys", Proceedings of Sym. on Beta Titanium Alloys in the 80's, AIME, Atlanta GA, Mar. 8, 1983, p. 19.
9. Okada, M., "Strengthening of Ti-15-3 by Two-step Aging", Proceedings of the Sixth International Conference on Titanium, P. Lacombe, R. Tricot and G. Beranger, Eds., Nice, France, 1988, p. 1625.
10. Imam, M. A., Poulose, P. K. and Rath, B. B., "Effect of Cold Work and Heat Treatment in Alpha Region on Mechanical Properties of Ti-15.3 Alloy", Proceedings of the Seventh World Conference on Titanium, F. H. Frohes and I. L. Caplan, Eds., The Metallurgical Society, Warrendale, PA, 1992, p. 177.
11. Wang, K., Gustavson, L. and Dumbleton, J., "Low Modulus, High Strength, Biocompatible Titanium Alloy for Medical Implants", ibid., p. 2697.
12. Titanium Metals Company of America, letter communication, TIMET, Henderson, NV.
13. ASM Handbook, ASM International, Materials Park, OH, Vol.2, 1990, p. 594.
14. Imam, M. A. and Gilmore, C. M., Met. Trans., Vol. 14A, Feb., 1983, p.233.
15. Pilliar, R. M., Modern Metal Processing for Improved Load-bearing Surgical Implants, Biomaterials (England), Vol. 12 (2), 1991, pp. 95-101.
16. Mishra, A. K., Davidson, J. A., Kovacs, P. and Poggie, R. A., "Ti-13Nb-13Zr: A New Low Modulus, High Strength, Corrosion Resistant, Near Beta Alloy for Orthopedic Implants", Beta Titanium Alloys in the 90"s, R. R. Boyer and D. A. Koss, Eds., The Metallurgical Society, Warrendale, PA, 1993, p. 61.
17. Wang, K., Gustavson, L. and Dumbleton, J., "The Characterization of Ti-12Mo 6Zr-2Fe; A New Biocompatible Ti Alloy Developed for Surgical Implants", ibid. pp. 2689-2696.
18. Steinemann, et.al., "Beta -titanium Alloy for Surgical Implants", Proceedings of 7th Intl. Conf. on Ti: Titanium 92, F. H. Frohes and I. L. Caplan, Eds., The Metallurgical Society, Warrendale, PA, 1993, pp. 2689-2696.
19. Dieter, George E., Mechanical Metallurgy, Third Edition, Chapter 8, McGraw Hill Pub. Co., New York, 1986.
20. Imam, M. A., Fraker, A. C. and Gilmore, C. M., "Corrosion Fatigue of 316L Stainless Steel, Co-Cr-Mo Alloy and ELI Ti-6Al-4V," Corrosion and Degradation of Implant Materials, ASTM STP 684, B. C. Syrett and A. Acharya, Eds., American Society for Testing and Materials, 1979, pp. 128-143.
21. Yue, S., Pilliar, R. M. and Weatherly, G. C., Journal of Biomedical Materials Res., Vol. 18, 1984, pp. 1043-1058.
22. Mishra, A. K. and Davidson, J. A., "Abrasive Resistance of a Candidate Coating for Orthopedic Articulating Surfaces", Biomaterial Tissue Interfaces, P. J. Doherty, et. al., Eds., Elsevier, NY, Vol. 10, 1992, p. 111.
23. Mishra, A. K., et al., "Diffusion Hardening- A New Hardening Process for Titanium Alloys", Surface Modification Technologies VII, T. S. Sundarshan, Ed., The Institute of Materials, London, 1994, pp. 453-471.
24. Hahn, H., Lare, P. J., Rowe, R. H., Fraker, A. C. and Ordway, F., "Mechanical Properties and Structure of Tî-6Al-4V with Graded Porosity Coatings Applied by Plasma Spraying for Use in Orthopedic Implants", Corrosion and Degradation of Implant Materials: Second Symposium, ASTM STP 859, A. C. Fraker and C. D. Griffin, Eds., American Society for Testing and Materials, Philadelphia, PA, 1985, pp. 179-191.
25. Merrit, K. and Brown, S. A., Intl. Journal Dermatol., Vol. 20, Mar., 1981, pp. 89-94.
26. Williams, D. F., Biocompatibility of Clinical Implant Materials, Vol. 1, CRC Press, Boca Raton, FL, 1981.
27. Kornilov, I.I., Doklady Akad, Nauk. S.S.R. 183(5), 1968, p. 1087.
28. Fraker, A. C. and Ruff, A. W., Corrosion Science, Vol. 11, 1971, pp. 763-765.
29. Gangloff, R. P., Scully, J. R., Young, L. M., Young, G. A., Jr., and Kolman, D. G., Environmentally Assisted Cracking of High Strength Beta Titanium Alloys, Report N00014-91-J-4164 to Office of Naval Research, School of Engineering and Applied Science (SEAS), University of Virginia, SEAS Report No. UVA/525464/MSE464/101, 1992, pp.39-53.
30. Mausli, P. A., Steinemann, S. G. and Simpson, J. P., Proceedings of the Sixth World Conference on Titanium, P. Lacombe, R. Tricot and G. Beranger, Eds., 1988, pp. 1759-1764.
31. Plock, L. F., Potentiodynamic Measurements of Crevice-Corrosion-Resistant Titanium Alloys, Research and Development Report No. 513, Reactive Metals, Inc., Niles, OH, 1968, pp. 1-25.