The effect of the transverse component of the hip reaction on cement mantle stresses in a model of an implanted Exeter™ prosthesis

Journal of Strain Analysis for Engineering Design

Volumn 31, Issue 3, 1996, Pages 205-214

  Colgan, D ^a   McTague, D ^a   O'Donnell, P ^a   Little, E G ^a  

^a UNIVERSITY OF LIMERICK   (Ireland)

Author keywords

Cement mantle stresses; Embedded strain gauging; Model testing; Torsional loading; Total hip replacement; Transverse joint force

Indexed keywords

BENDING STRENGTH; EFFECTS; ELASTIC MODULI; HIP PROSTHESES; MODELS; SHEAR STRESS; STRAIN GAGES; THREE DIMENSIONAL; TORSIONAL STRESS; TRANSDUCERS;

CEMENT MANTLE STRESSES; IMPLANTED EXETER PROSTHESIS; MODULUS OF RIGIDITY; STRAIN TRANSDUCERS; TRANSVERSE JOINT FORCE; TWO DIMENSIONAL;

IMPLANTS (SURGICAL);

EID: 0030147779     PISSN: 03093247     EISSN: None     Source Type: Journal    
DOI: 10.1243/03093247V313205     Document Type: Article

References (51)

1. PAUL, J. P. Forces at the human hip joint, PhD Thesis, University of Glasgow, 1967, pp. 181-242.
2. McLEISH, R. D. and CHARNLEY, J. 'Abduction forces in the one legged stance', J. Biomechanics, 1970, 3, 191-209.
3. FOWLER, J. L., GIE, G. A., LEE, A. J. C. and LING, R. S. M. 'Experience with the Exeter total hip replacement since 1970', Orthop. Clinics of N. Am., 1988, 3(19), 477-488.
4. WROBLEWSKI, B. M. 'Transverse load on the hip joint: a subject for further research', Engng Medicine, 1980, 9, 163-164.
5. WEINANS, H., HUISKES, R. and GROOTENBOER, H. J. 'Trends of mechanical consequences and modelling of a fibrous _ membrane around femoral hip prostheses' J. Biomechanics, 1990, 23, 991-1000.
6. PRENDERGAST, P. J. and TAYLOR, D. 'Stress analysis of the proximo-medial femur after total hip replacement', J. Biomed. Engng, 1990, 12, 379-382.
7. HAMPTON, S. J., ANDRIACCHI, T. P, DRAGANICH, L. F. and GALANTE, J. O. 'Stresses following stem cement bond failure in femoral total hip components', Proceedings of 27th Annual ORS, Las Vegas, Nevada, 1981, p. 144.
8. YETTRAM, A. L. 'Effect of interface conditions on the behaviour of a Freeman hip endoprosthesis', J. Biomed. Engng, 1989, 11, 520-524.
9. MILES, A. W. and DALL, D. M. 'An experimental study of femoral cement stress in total hip replacement - influence of structural stiffness of the femoral stem', Engng Medicine, 1985, 14, 133-135.
10. WALKER, P. S. and ROBERTSON, D. D. 'Design and fabrication of cementless hip stems', Clin. Orthop., 1988, 235, 25-34.
11. PAUL, J. P. 'Approaches to design', Proc. R. Soc. Lond. B, 1976, 192, 163-172.
12. BERGMANN, G., GRAICHEN, F. and ROHLMANN, A. 'Hip joint loading during walking and running measured in two patients', J. Biomechanics, 1993, 26, 969-990.
13. WILLIAMS, J. F. and SVENSSON, N. L. 'A force analysis of the hip joint', Bio-medical Engineering, August 1968, pp. 365-370.
14. MERCHANT, A. C. 'Hip abductor muscle force', J. Bone Jt Surg., 1966, 46-A, 462-476.
15. BERGMANN, G., GRAICHEN, F. and ROHLMANN, A. 'Loading of hip implants by torsional moments', 38th Annual Meeting, Orthopedic Research Society, Washington, D.C., February 1992, p. 19.
16. PHILLIPS, T. W., NGUGEN, L. T. and MUNRO, S. D. 'Loosening of cementless femoral stems: a biomechanical analysis of immediate fixation with loading vertical, femur horizontal', J. Biomechanics, 1991, 24, 37-48.
17. CROWINSHIELD, R. D., JOHNSTON, R. C., ANDREWS, J. G. and BRAND, R. A. 'A biomechanical investigation of the human hip', J. Biomechanics, 1978, 11, 75-85.
18. O'CONNOR, J. J. 'Load simulation problems in model testing', in Strain Measurement in Biomechanics, edited by A. Miles and K. Tanner, 1992 (Chapman and Hall, London), pp. 14-38.
19. HARRIGAN, T. P. and HARRIS, W. H. 'A three-dimensional non-linear finite element study of the effect of cement-prosthesis debonding in cemented femoral total hip components', J. Biomechanics, 1991, 24, 1047-1058.
20. HARRIGAN, T. P., KAREH, J. A., O'CONNOR, D. O., BURKE, D. W. and HARRIS, W. H. 'A finite element study of the initiation of failure of fixation in cemented femoral total hip components', J. Orthop. Res., 1992, 10, 134-144.
21. BROWN, T. D., PEDERSEN, D. R., RADIN, E. L. and ROSE, R. M. 'Global mechanical consequences of reduced cement/bone coupling rigidity in proximal femoral arthroplasty. A three dimensional finite element analysis', J. Biomechanics, 1988, 21, 115-129.
22. BURKE, D. W., O'CONNOR, D. O., ZALENSKY, E. B., RUBASH, H. E. and HARRIS, W. H. 'Biomechanics of femoral total hip components in simulated stair climbing', Proceedings of 34th Annual ORS, Atlanta, Georgia, 1988, p. 345.
23. FAGAN, M. J. and LEE, A. J. C. 'Role of the collar on the femoral stem of cemented total hip replacements', J. Biomed. Engng, 1986, 8, 295-304.
24. TENSI, H. M., GESE, H. and ASCHERL, R., 'Non-linear three dimensional finite element analysis of a cementless hip endoprosthesis', Proc. Instn Mech. Engrs, Part H, 1989, 203(H4), 215-222.
25. KATZ, D. M., SHELTON, J. C. and BONFIELD, W. 'Obtaining authentic results using holographic interferometry', in Experimental Mechanics: Technology Transfer between High Tech Engineering and Biomechanics, edited by E. G. Little, Limerick, 4-6 September 1992, pp. 63-71 (Elsevier).
26. COLGAN, D., McTAGUE, D., O'DONNELL, P. and LITTLE, E. G. 'In-vitro stress analysis of the hip investigating the effects of joint and muscle load simulation', in Recent Advances in Experimental Mechanics, edited by J. F. Silva Gomes et al., Lisbon, 18-22 July 1994, pp. 1381-1386 (Balkema).
27. ROSSETTO, S., BRAY, A. and LEVI, R. 'Three dimensional strain rosettes: pattern selection and performance evaluation', Expl Mechanics, 1975, 10(15), 375-381.
28. BARBATO, G. and LITTLE, E. G. 'Performance analysis of three dimensional strain rosettes derived using computer simulation', Technical Note, Istituto di Metrologia, Turin, Italy, 1984.
29. BAZURGUI, A., NGUGER, S. and VU, T. H. 'The three-dimensional strain measurement plug technique', Proceedings of 5th International Conference on Experimental Stress Analysis, Udine, Italy, 1974, pp. 4.11-4.19.
30. LITTLE, E. G. 'A method of embedding strain gauges into an epoxy model with proposed application to the tibial component of the Geomedic knee joint', Proceedings of 7th International Conference on Experimental Stress Analysis, Haifa, Israel, 1982, pp. 202-203.
31. McTAGUE, D. and LITTLE, E. G. 'Assessment of strain gradients affecting the performance of 3D strain rosettes - relevant to the analysis of cement mantle strains in total hip replacements', Strain, 1992, 28, 143-151.
32. McTAGUE, D., MURPHY, E. and LITTLE, E. G. 'The effects of torsion on the performance of 3D strain rosettes: with application to assessment of strains in models of a cement mantle supporting a femoral hip replacement', in Experimental Mechanics: Technology Transfer between High Tech Engineering and Biomechanics, edited by E. G. Little, Limerick, 4-6 September 1992, pp. 423-432 (Elsevier).
33. LITTLE, E. G. 'Effects of self heating when using continuous bridge voltages for the strain gauging of epoxy models', Strain, 1982, 18, 131-135.
34. POPLE, J. 'Errors and uncertainties in strain measurement', in Strain Gauge Technology, edited by A. L. Window and G. S. Holister, 1982 (Elsevier Applied Science, London).
35. McTAGUE, E. D. Three-dimensional embedded strain gauge analysis of cement mantle stresses in a model of an Exeter total hip replacement, PhD Thesis, University of Limerick, 1992, Ch. 5, pp. 73-82.
36. LITTLE, E. G. 'Three-dimensional strain rosettes from an analysis of the Geomedic knee prosthesis and underlying cement fixation', in Applied Stress Analysis, edited by T. E. Hyde and E. Ollerton, 1990 (Elsevier Applied Science, Barking), pp. 140-149.
37. REILLY, D. T. and BURSTEIN, A. H. 'The elastic and ultimate properties of compact bone tissue', J. Biomechanics, 1975, 8, 393-405.
38. HOSDORF, H. Model Analysis of Structures, First Edition, 1974 (Van Nostrand Reinhold, New York).
39. FORNASIER, V. L. and CAMERON, H. Y. 'The femoral stem/ cement interface in total hip replacement', Clin. Orthop., 1976, 116, 248-252.
40. COLGAN, D., TRENCH, P., SLEMON, D., McTAGUE, D., FINLAY, J. B., O'DONNELL, P. and LITTLE, E. G. 'A review of joint and muscle load simulation relevant to in-vitro stress analysis of the hip', Strain, May 1994, 47-61.
41. JACOB, H. A. C., HUGGLER, A. H. and RUTTIMAN, B. 'In-vivo investigations on the mechanical function of the tractus iliotibialis', in Biomechanics: Principles and Applications, edited by R. Huiskes, D. Van Campen and J. Dewijn, 1982 (Martinus Nijhoff, The Hague), pp. 161-167.
42. ROSSETTO, S., BRAY, A. and LEVI, R. 'Uncertainties and errors in magnitude and direction of principal strains evaluated with three-dimensional strain rosettes', 5th International Conference on Experimental Stress Analysis, Udine, Italy, 1974, pp. 1.153-1.161.
43. ANSI/ASME, PTC 19.1, Measurement uncertainty, 1985, Part 1, pp. 57-60.
44. ALLISON, I. M. 'Load transmission between cylinders made from different materials', in Experimental Mechanics: Technology Transfer between High Tech Engineering and Biomechanics, edited by E. G. Little, Limerick, 4-6 September 1992, pp. 11-22 (Elsevier).
45. FAGAN, M. J. and LEE, A. J. C. 'An examination of femoral stem geometry in total hip replacements', Innov. Technol. Biol. Medicine, 1988, 1(9), 30-43.
46. DRAGONI, E., ANDRISANO, A. O. and BERTUZZI, F. 'Stresses in ceramic prosthetic heads under axisymmetric loading: effect of taper friction, support conditions and spigot elasticity', in Experimental Mechanics: Technology Transfer between High Tech Engineering and Biomechanics, edited by E. G. Little, Limerick, 4-6 September 1992, pp. 23-35 (Elsevier).
47. LEWIS, J. L., ASKEW, M. J., WIXON, R. L., KRAMER, G. M. and TARR, R. R. 'The influence of prosthetic stem stiffness and of a calcar collar on the stresses in the proximal end of the femur with a cemented femoral component', J. Bone Jt Surg., 1984, 66-A, 280-286.
48. ROHLMANN, A., MOSSNER, U., BERGMANN, G. and KOLBEL, R. 'Finite element analysis and experimental investigation in a femur with hip endoprosthesis', J. Biomechanics, 1983, 16, 727-742.
49. CROWNINSHIELD, R. D., BRAND, R. A., JOHNSTON, R. C. and MILROY, J. C. 'An analysis of femoral component stem design in total hip arthroplasty', J. Bone Jt Surg., 1980, 62-A, 68-78.
50. CROWNINSHIELD, R. D., BRAND, R. A., JOHNSTON, R. C. and MILROY, J. C. 'The effect of femoral stem cross-section geometry on cement stresses in total hip reconstruction', Clin. Orthop., 1980, 146, 71-77.
51. HUISKES, R. 'Some fundamental aspects of human joint replacement', Acta Orthop. Scand., Suppl., 1980, 185.