Creep-fatigue crack growth behavior in 1Cr-1Mo-0.25V steels. Part I: Estimation of crack tip parameters

Fatigue and Fracture of Engineering Materials and Structures

Volumn 19, Issue 4, 1996, Pages 387-398

  Adefris, N ^a   Saxena, A ^b   McDowell, D L ^c  

^a 3M COMPANY   (United States)

^b Georgia Institute of Technology   (United States)

^c GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

1Cr 1Mo 0.25V steel; Creep; Creep fatigue; Fatigue; FEM analyses; Hold time

Indexed keywords

CHROMIUM ALLOYS; CRACK PROPAGATION; CREEP; DEFORMATION; ELASTIC MODULI; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; FRACTURE MECHANICS; MATHEMATICAL MODELS; PARAMETER ESTIMATION; STRAIN HARDENING; STRESS INTENSITY FACTORS;

BACK STRESS TENSORS; CHROMIUM MOLYDENUM STEELS; CRACK TIP PARAMETERS; CREEP FATIGUE CRACK GROWTH; CREEP ZONE BOUNDARY; DISPLACEMENT RATE VECTOR; HOLD TIME; LOAD LINE DEFLECTION RATE; PLASTIC HARDENING LAW CONSTANTS; TRACTION VECTOR;

STEEL;

EID: 0030129359     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1460-2695.1996.tb00976.x     Document Type: Article

References (30)

1. A. Saxena, R. S. Williams and T. T. Shih (1981) A model for representing and predicting the influence of hold time on fatigue crack growth behavior at elevated temperature. In: Fracture Mechanics: Thirteenth Conference, ASTM STP 743, pp. 86-89. ASTM, Philadelphia, PA.
2. A. Saxena and B. Gieseke (1987) Transients in elevated temperatures crack growth. In: Seminar Proceedings of MECAMAT: Int. Seminar on High Temperature Fracture Mechanisms and Mechanics, III, 19-36, Dourdan, France.
3. t-parameter for characterizing creep crack growth rate in the transient regime. In: Nonlinear Fracture Mechanics: Time Dependent Fractue, ASTM STP 995, I, 7-29. ASTM, Philadelphia, PA.
4. J. W. Hutchinson (1968) Singular behavior at the end of a tensile crack in a hardening material. J. Mech. Phys. Solids 16, 13-31.
5. J. R. Rice and G. F. Rosengren (1968) Plane strain deformation near a crack tip in a power law hardening material. J. Mech. Phys. Solids 16, 1-12.
6. K. Yoon, A. Saxena and D. L. McDowell (1992) Influence of crack tip cyclic plastic on creep fatigue crack growth. In: Fracture Mechanics: Twenty Second Conference, ASTM STP 1131, pp. 367-392. ASTM, Philadelphia, PA.
7. J. D. Landes and J. A. Begley (1976) A fracture mechanics approach to creep crack growth. In: Cracks and Fracture, ASTM STP 590, pp. 128-148. ASTM, Philadelphia, PA.
8. V. Kumar and C. F. Shih (1980) Fully plastic crack solutions with applications to creep crack growth. In: Proc. Institute of Mechanical Engineers Conference, Engineering Aspects of Creep, 1, 211-214.
9. H. Riedel (1981) Creep deformation at crack tips in elastic viscoplastic solids. J. Mech. Phys. Solids, 29, 35-49.
10. H. Riedel (1980) A contribution to the theory of fracture mechanics under creep conditions. In: Proc. Institute of Mechanical Engineers Conference, Engineering Aspects of Creep, 1, 215-218.
11. J. L. Bassani and F. A. McClintock (1981) Creep relaxation of stress around a crack tip. Int. J. Solids Struct. 7, 479-492.
12. H. Riedel and J. R. Rice (1980) Tensile cracks in creeping solids. In: Fracture Mechanics: Twelfth Conference, ASTM STP 700, pp. 121-130. ASTM, Philadelphia, PA.
13. K. Ohji, K. Ogura and S. Kubo (1979) Stress-strain field and modified J-integral in the vicinity of a crack tip under transient creep conditions. Jpn. Soc. Mech. Engng 790-18, 18-18, JSME, Tokyo (in Japanese).
14. R. Ehlers and H. Riedel (1981) A finite element analysis of creep deformation in a specimen containing a macroscopic crack. In: Advances in Fracture Research: Proceedings of the Fifth International Conference in Fracture, ICF-5, 2, 691-698. Pergamon Press, Oxford.
15. J. R. Rice (1968) A path independent integral and the approximate analysis of strain concentration by notches and cracks. ASME J. Appl. Mech. 34, 379-386.
16. H. Riedel (1986) In: Fracture at High Temperature (MRE), (Edited by B. Ilschner and N. J. Grant). Springer, Berlin.
17. t-parameter. Int. J. Fract. 46, 81-104.
18. H. Riedel and V. Detampel (1987) Creep crack growth in ductile, creep resistant steels. Int. J. Fract. 33, 239-262.
19. A. Saxena (1986) Creep crack growth under non-steady state conditions. In: Fracture Mechanics: Seventeenth Conference, ASTM STP 905, pp. 185-201. ASTM, Philadelphia, PA.
20. M. L. Bartlett (1990) Unpublished data. Southwest Research Institute (SWRI), San Antonio, TX.
21. ASTM E139-83 (1990) Standard practice for conducting creep, creep-rupture and stress-rupture tests of metallic materials. In: Annual Book of ASTM Standards: Metals Test Methods and Analytical Procedures, 3.01, 311-321. ASTM, Philadelphia, PA.
22. t-Parameter for Primary Creep (PhD Thesis). School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
23. D. R. J. Owen and E. Hinton (1980) In: Finite Elements in Plasticity. Pineridge Press, Swansea.
24. D. L. McDowell (1992) A nonlinear kinematic hardening theory for cyclic thermoplasticity and thermoviscoplasticity. Int. J. Plasticity 8, 695-728.
25. K. Kanazawa, K. J. Miller and M. W. Brown (1979) Cyclic deformation on 1%Cr-Mo-V steel under out of phase loads. Fatigue Engng Mater. Struct. 2, 217-228.
26. M. W. Brown and K. J. Miller (1979) Biaxial cyclic deformation behavior of steels. Fatigue Engng Mater. Struct. 1, 93-106.
27. S. K. Bhambri, C. R. Prasad and R. Vasudevan (1987) Low cycle fatigue behavior of 1Cr-Mo-V steel with bainite and ferrite microstructure. Int. J. Fatigue 9(3), 239-246.
28. A. Saxena and J. Han (1986) Evaluation of crack tip parameters for characterizing crack growth behavior in creeping material. ASTM Task Group Report, Georgia Institute of Technology, Atlanta, GA.
29. C. F. Shih (1983) Table of Hutchinson-Rice Rosengren singular field quantities. Technical Report MRL E-147, Brown University, Providence, RI.
30. J. C. Moosbrugger and D. L. McDowell (1989) On a class of kinematic hardening rules for nonproportional cyclic plasticity. ASME J. Engng Mater. Tech. 111, 87-98.