Galvanic corrosion of zinc and its alloys

Journal of the Electrochemical Society

Volumn 143, Issue 4, 1996, Pages 1472-1484

  Zhang, X G ^a  

^a Sheridan Park   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

ANODES; CHEMICAL ANALYSIS; COATINGS; CORROSION PROTECTION; ELECTROCHEMISTRY; ELECTRODES; GEOMETRY; METALLURGY; PAINT; STEEL; ZINC; ZINC ALLOYS;

ELECTRODE POTENTIALS; ELECTROLYTIC PROPERTIES; GALVANIC CORROSION; GEOMETRIC ARRANGEMENT; KIRCHHOFF SECOND LAW; METALLURGICAL PROPERTIES; SURFACE CONDITIONS; ZINC ANODES; ZINC COATINGS;

ELECTROCHEMICAL CORROSION;

EID: 0030128532     PISSN: 00134651     EISSN: None     Source Type: Journal    
DOI: 10.1149/1.1836662     Document Type: Review

References (120)

1. C. J. Slunder and W. K. Boyd, Zinc, Its Corrosion Resistance, 2nd ed., International Lead Zinc Research Organization, Inc., New York (1986).
2. Metal Corrosion in the Atmosphere, STP 435, pp. 360-391, ASTM, Philadelphia, PA (1968).
3. M. G. Fontana and N. D. Greene, Corrosion Engineering, 2nd ed., McGraw-Hill, Inc., New York (1978).
4. F. Mansfeld, D. H. Hengstenberg, and V. J. Kenkel, Corrosion, 30, 343 (1974).
5. S.-M. Huang and R. A. Oriani, Abstract 91, p. 156, The Electrochemical Society Extended Abstracts, Vol. 93-2, New Orleans, LA, Oct. 10-15, 1993.
6. I. L. Rozenfeld, Atmospheric Corrosion of Metals, NACE, Houston, TX (1972).
7. P. Doig and P. E. J. Flewitt, This Journal, 126, 2057 (1979).
8. G. Lauer, and F. Mansfeld, Corrosion, 26, 504 (1970).
9. J. R. Scully, and H. P. Hack, Galvanic Corrosion, STP 978, p. 136-157, ASTM, Philadelphia, PA (1988).
10. A. M. Shams El Din, J. M. Abd El Kader, and M. M. Badran, Br. Corros. J., 16, (1981).
11. R. S. Munn and O. F. Devereux, Corrosion, 47, 618 (1991).
12. D. J. Frydrych, Ph.D. Thesis, University of Pennsylvania, Philadelphia, PA (1986).
13. Automotive Corrosion by Deicing Salts, R. Baboian, Editor, NACE, Houston, TX (1981).
14. R. B. Hoxeng, and C. F. Prutton, Corrosion, 5, 330 (1949).
15. G. K. Glass and V. Ashworth, Corros. Sci., 25, 971 (1985).
16. G. Schikorr, Trans. Electrochem. Soc., 76, 247 (1939).
17. P. T. Gilbert, Sheet Metal Industries (Oct.-Dec. 1948).
18. H. L. Shuldener and L. Lehrmen, Corrosion, 14, 17 (1958).
19. D. Whiting, D. Stark, and W. Schutt, Paper No. 41, NACE Annual Conference (1981).
20. C. Cabrillac and A. Exertier, in Proceedings of the International, Conference on Hot Dip Galvanization, Paris, June, 1964.
21. J. A. von Fraunhofer and A. T. Lubinski, Corros. Sci., 14, 225 (1974).
22. D. L. Jordan, in Zinc-Based Steel Coating Systems: Metallurgy and Performance, G. Krauss and D. K. Matlock, Editors, pp. 195-205, TMS, Warrendale, PA (1990).
23. D. Massinon and D. Thierry, Paper No. 574, NACE Corrosion '91, Conference, Cincinnati, OH, March 11-15, 1991.
24. D. Massinon and D. Dauchelle, Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH '89, pp. 585-595, Tokyo, Japan, Sept. 5-7, 1989.
25. M. J. Pryor and D. S. Keir, This Journal, 104, 269 (1957).
26. T. D. Burleigh, Corrosion, 45, (1989).
27. A. Al-Hashem and D. Thomas, Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet, GALVATECH '89, pp. 611-618, Tokyo, Japan, Sept. 5-7, 1989.
28. B. C. Hafford, in Encyclopedia of Materials Science and Engineering, Vol. 7, M. B. Bever, Editor, pp. 5521-5528, MIT Press, Cambridge, MA (1986).
29. S. Schuldiner and R. E. White, This Journal, 97, 433 (1950).
30. E. A. Anderson, in Corrosion Resistance of Metals and Alloys, 2nd ed., Chap. 9, F. L. Laque and H. R. Copson, Editors, p. 223, Reinhold Pub. Co., New York (1963).
31. S-i Suzuki, T. Kanamura, K. Arai, and J. Morita, Paper No. 415, NACE Annual Conference and Corrosion Show, March 11-15, 1991.
32. F. Mansfeld and J. Kenkel, Corrosion, 236 (1977).
33. M. Romanoff, Underground Corrosion, U.S. National Bureau of Standards Circular 579, Washington, DC (1957).
34. A. Asphahani and H. H. Uhlig, This Journal, 122, 174 (1975).
35. X. G. Zhang and E. M. Valeriote, Corros. Sci., 34, 1957 (1993).
36. X. G. Zhang and E. M. Valeriote, in Atmospheric Corrosion, ASTM STP 1239, p. 230, American Society for Testing and Materials, Philadelphia, PA (1994)
37. E. Escalante, in Galvanic Corrosion, STP 978, pp. 193-202, ASTM, Philadelphia, PA (1988).
38. G. Schick, ibid., pp. 283-290.
39. A. M. Shams El Din, J. M. Abd El Kader, and A. T. Kuhn, Br. Corros. J., 15, 208 (1980).
40. K. G. Compton, Corrosion, 16, 87 (1960).
41. F. Mansfeld and J. Kenkel, ibid., 31, 298 (1975).
42. M. J. Pryor, in Corrosion, L. L. Shreir, Editor, 1, 69, George Newnes Ltd., London (1963).
43. L. M. Baugh, Electrochim. Acta, 24, 657 (1979).
44. R. J. Brodd and V. E. Leger, in Encyclopedia of Electrochemistry of the Elements, Vol.V, A. J. Bard Editor, pp. 2-60, Marcel Dekker, Inc., New York (1976).
45. T. Hurlen and K. P. Fischer, J. Electroanal. Chem. Interfacial Electrochem., 61, 165 (1975).
46. J. T. Waber, in Localized Corrosion, pp. 221-237, NACE, Houston, TX (1974).
47. J. T. Waber, This Journal, 101, 271 (1954).
48. E. McCafferty, ibid., 124, 1869 (1977).
49. C. Wagner, ibid., 99, 1 (1952).
50. S. Kurokawa, K. Yamato, and T. Ichida, Paper 396, presented at NACE Corrosion '91 Conference, Cincinnati, OH, March 11-15, 1991.
51. W. J. Schwerdtfeger and R. J. Manuele, Corrosion, 19, 59 (1963).
52. R. Morris and W. Smyrl, This Journal, 136, 3229 (1989).
53. R. S. Munn and O. F. Devereux, Corrosion, 47, 612 (1991).
54. V. Kucera and E. Mattsson, in Atmospheric Corrosion, W. H. Ailor, Editor, John Wiley & Sons, Inc., New York (1982).
55. K. G. Compton and A. Mendizza, in Proceedings of ASTM 58th Annual Meeting, Symposium on Atmospheric Corrosion of Non-Ferrous Metals, STP 175, pp. 116-125, ASTM, Philadelphia, PA (1955).
56. N. S. Berke and J. J. Friel, Laboratory Corrosion Tests and Standards, STP 866, pp. 143-158, ASTM, Philadelphia, PA (1985).
57. H. H. Lee and D. Hiam, Corrosion, 45, 852 (1989).
58. K. L. Lin, C. F. Yang, and J. T. Lee, ibid., 47, 9 (1991).
59. C. A. Loto, Corrosion Prevention & Control, pp. 131-138, Oct. 1990.
60. D. A. Jones and N. R. Nair, Corrosion, 41, 357 (1985).
61. S-i Suzuki, T. Kanamura, K. Arai, and J. Morita, Paper 415, presented at the Nace Annual Conference and Corrosion Show, March 11-15, 1991, Cincinnati, OH.
62. M. Selvam and S. Guruviah, Bull. Electrochem., 6, 485 (1990).
63. M. K. Budinski and B. E. Wilde, Corrosion, 43, 60 (1987).
64. J. F. Dewald, Bell Sys. Tech., 39, 615 (1960).
65. A. E. Bothe, J. R. Vilche, K. Juttner, W. J. Lorenz, W. Kautek, and W. Paatsch, Corros. Sci., 32, 621 (1991).
66. M. S. Wilhelm, in Galvanic Corrosion, ASTM STP 978, p. 23, American Society for Testing and Materials, Philadelphia, PA (1988).
67. D. Massinon, D. Dauchelle, and J. C. Charbonnier, Mater. Sci. Forum, 44-45, 461 (1989).
68. D. L. Jordan, in Proceedings of the Symposium on Advances in Corrosion Protection by Organic Coatings, pp. 30-43 (1989).
69. P. Tierra and M. Bernal, Paper presented at InterGalva '91, Barcelona, June 5-7, 1991.
70. B. E. Wilde and M. K. Budinski, (Ohio State University), U.S. Pat. 4,917,966 (1990).
71. M. Pushpavanam, S. R. Natarajan, K. Balakrishnan, and L. R. Sharma, J. Appl. Electrochem., 21, 642 (1991).
72. G. W. Kurr, Mater. Perform., 18, 34 (1979).
73. G. Trabanelli, F. Zucchi, G. Brunoro, and G. Gilli, Electrodeposition and Surface Treatment, 3, 129 (1975).
74. E. A. Anderson and C. E. Reinhard, The Corrosion Handbook, H. H. Uhlig, Editor, pp. 331-346, John Wiley & Sons, Inc., New York (1948).
75. P. T. Gilbert, This Journal, 99, 16 (1952).
76. I. L. Rosenfeld, in Proceedings of The 1st International Congress on Metallic Corrosion, pp. 243-253, London (1961).
77. D. P. Doyle and T. E. Wright, in Galvanic Corrosion, STP 978, pp. 161-171, ASTM, Philadelphia, PA, (1988).
78. K. Hayashi, Y. Ito, C. Kato, and Y. Miyoshi, Tetsu-To-Hagane, 77, 1122 (1991).
79. A. K. Dey, A. K. Sinha Mahapatra, D. K. Khan, A. N. Mukherjee, R. Narain, K. P. Mukherjee, and T. Banerjee, NML Technical Journal India, 8, 11 (1966).
80. R. W. Bailey and H. G. Ridge, Chemistry and Industry, (Sept. 14, 1957).
81. H. O. Teeple, ASTM 58th Annual Meeting, Symposium on Atmospheric Corrosion of Non-Ferrous Metals, STP 175, pp. 89-115, ASTM, Philadelphia, PA (1955).
82. R. Baboian, in Atmospheric Factors Affecting the Corrosion of Engineering Metals, STP 646, pp. 17-29, ASTM, Philadelphia, PA (1978).
83. H. D. Holler, This Journal, 97, 271, 277, 453 (1950).
84. J. R. Wellington, Paper presented at the 17th Annual Conference, National Association of Corrosion Engineers, Buffalo, New York, March 13-17, 1961.
85. M. Pourbaix and N. De Zoubov, in Atlas of Electrochemical Equilibria in Aqueous Solutions, 2nd ed., pp. 406-413, NACE, Houston, TX (1974).
86. M. J. Pryor and D. S. Keir, This Journal, 105, 625 (1958).
87. M. R. Lambert, R. G. Hart, and H. E. Townsend, Paper No. 831817, 2nd Automotive Corrosion Prevention Conference (1983).
88. J. H. Morgan, Cathodic Protection, Leonard Hill Ltd., London (1959).
89. S. A. Lindqvist, L. Meszaros, and L. Svenson, J. Oil Colour Chemists Assn., No. 1, pp. 10-14 (1985).
90. H. E. Townsend and A. R. Borzillo, Paper 421, presented at NACE Corrosion '87 Conference, San Francisco, CA, March 9-13, 1987.
91. F. Theiler, Corros. Sci., 14, 405 (1974).
92. J. E. O. Mayne, J. Iron Steel Inst., 176, 140 (1954).
93. F. L. LaQue, in The Corrosion Handbook, H. H. Uhlig, Editor, pp. 383-420, John Wiley & Sons, Inc., New York (1948).
94. N. R. Short, A. Abibsi, and J. K. Dennis, Trans. Inst. Met. Finish., 67, Part 3, pp. 383-420 (Aug. 1989).
95. M. Stratmann and J. Muller, Corros. Sci., 36, 327 (1994).
96. K. H. Logan, in The Corrosion Handbook, H. H. Uhlig, Editor, pp. 446-466, John Wiley & Sons, Inc., New York (1948).
97. F. Mansfeld and J. V. Kenkel, Corros. Sci., 15, 239 (1975).
98. R. B. Hoxeng, Corrosion, 6, 308 (1950).
99. L. J. Kotnik, Ph.D. Thesis, Case Institute of Technology, Cleveland, OH (1960).
100. W. Feitknecht, Chem. and Industry, pp. 1102-1109, Sept. 5, 1959.
101. B. E. Roetheli, G. L. Cox, and W. B. Littreal, Metals & Alloys, 3, 73 (1932).
102. K. G. Boto and L. F. G. Williams, J. Electroanal. Chem., 77, 1 (1977).
103. K. F. Lorking, Metallurgy Report No. 67, Dept. of Supply, Australian Defence Scientific Service, Melbourne, Australia (May 1967).
104. I. A. Denison and M. Romanoff, J. Res. NBS, 40(2), 301 (1948).
105. W. J. Schwerdtfeger and O. N. McDorman, ibid., 47(2), 104 (1951).
106. B. D. Craig, Fundamental Aspects of Corrosion Films in Corrosion Science, Plenum Press, New York (1991).
107. K. R. Baldwin, M. J. Robinson, C. J. E. Smith, Br. Corrosion J., 29, 293 (1994).
108. K. R. Baldwin, M. J. Robinson, C. J. E. Smith, ibid., 29, 299 (1994).
109. J. H. Morgan, Corros. Tech., 272 (Aug. 1957).
110. R. C. Weast, in Proceedings of the 7th International Conference on Hot Dip Galvanizing, pp. 487-507, Pergamon Press, Oxford (1964).
111. B. Bogner, Mater. Perform., 29, 30 (1990).
112. D. Whiting, D. Stark, and W. Schutt, Paper No. 41, Corrosion/81, NACE, Houston, TX (1981).
113. G. W. Kurr, Mater. Perform., 18, 34 (1979).
114. Zinc Institute, Inc., and Zinc Development Association, Pipes & Pipelines International, pp. 23-27 (August, 1975).
115. J. A. H. Carson, Corrosion, 16, 99 (1960).
116. J. A. H. Carson, W. L. M. Phillips, and J. R. Wellington, ibid., 16, 107 (1960).
117. W. B. Mackay, Corrosion, 2nd ed., L. T. Shreir, Editor, p. 18, Newnes-Butterworths, London (1976).
118. L. J. Waldron and M. H. Peterson, Corrosion, 16, 81 (1960).
119. J. T. Grennel and W. C. G. Wheeler, J. Appl. Chem., 6, 415 (1956).
120. X. G. Zhang, Corrosion and Electrochemistry of Zinc, Plenum Press, New York, In Press.