Time-dependent, environmentally assisted crack growth in nicalon-fiber-reinforced SiC composites at elevated temperatures

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 4, 1996, Pages 839-849

  Henager Jr , C H ^a   Jones, R H ^a   Windisch Jr , C F ^a   Stackpoole, M M ^b   Bordia, R ^b  

^a PACIFIC NORTHWEST NATIONAL LABORATORY   (United States)

^b University of Washington   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON; COMPOSITE MICROMECHANICS; CRACK PROPAGATION; CRACKS; CUBIC BORON NITRIDE; INTERFACES (MATERIALS); MECHANICAL VARIABLES MEASUREMENT; OXYGEN; SILICON CARBIDE; STRESS RELAXATION; STRESSES;

CRACK BRIDGING; CRACK VELOCITY; EFFECTIVE APPLIED STRESS INTENSITY; EFFECTIVE ELASTIC CRACK; FIBER MATRIX INTERPHASES; NICALON FIBER REINFORCED SILICON CARBIDE COMPOSITES;

CERAMIC MATRIX COMPOSITES;

EID: 0030126604     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02649751     Document Type: Article

References (46)

1. S.M. Wiederhorn and L.H. Bolz: J. Am. Ceram. Soc., 1970, vol. 53 (10), pp. 543-48.
2. S.M. Weiderhorn, S.W. Freiman, E.R. Fuller, and C.J . Simmons: J. Mater. Sci., 1982, vol. 17, pp. 3460-78.
3. B.J. Pletka and S.M. Wiederhorn: in Fracture Mechanics of Ceramics, R.C. Bradt, D.P.H. Hasselman, and F.F. Lange, eds., Plenum Press, New York, NY, 1978, vol. 4, pp. 745-59.
4. A.G. Evans: J. Mater. Sci., 1972, vol. 7, pp. 1137-46.
5. A.G. Evans, L.R. Russell, and D.W. Richerson: Metall. Trans. A, 1975, vol. 6A, pp. 707-16.
6. A.G. Evans and F.F. Lange: J. Mater. Sci., 1975, vol. 10, pp. 1659-1664.
7. K.D. McHenry and R.E. Tressler: J. Mater. Sci., 1977, vol. 12, pp. 1272-78.
8. J.L. Henshall, D.J. Rowclifie, and J.W. Edington: J. Am. Ceram. Soc., 1979, vol. 62 (1-2); pp. 36-41.
9. J.L. Henshall: Res Mech., 1980, vol. 1, pp. 229-48.
10. J.L. Henshall: in Advances in Fracture Research (Fracture 81), D. Francois, ed., Pergamon Press, New York, NY, 1981, pp. 1541-49.
11. P.F. Becher and M.K. Ferber: Acta Metall., 1985, vol. 33 (7), pp. 1217-21.
12. H. Hübner and W. Jillek: J. Mater. Sci., 1977, vol. 12, pp. 117-25.
13. R.F. Cook, B.R. Lawn, and C.J. Fairbanks: J. Am. Ceram. Soc., 1985, vol. 68 (11), pp. 604-15.
14. P.L. Swanson, C.J. Fairbanks, B.R. Lawn, Y.-W. Mai, and B.J. Hockey: J. Am. Ceram. Soc., 1987, vol. 70 (4), pp. 279-89.
15. Y.-W. Mai and B.R. Lawn: J. Am. Ceram. Soc., 1987, vol. 70 (4), pp. 289-94.
16. R. Knehans and R. Steinbrech: J. Mater. Sci. Lett., 1982, vol. 1, pp. 327-29.
17. R. Steinbrech, R. Knehans, and W. Schaarwächter: J. Mater. Sci., 1983, vol. 18, pp. 265-70.
18. T. Fett and D. Munz: J. Am. Ceram. Soc., 1992, vol. 75 (11), pp. 3133-36.
19. R.E. Grimes, G.P. Kelkar, L. Guazzone, and K.W. White: J. Am. Ceram. Soc., 1990, vol. 73 (5), pp. 1399-1404.
20. K. Jakus, S.M. Weiderhorn, and B.J. Hockey: J. Am. Ceram. Soc., 1986, vol. 69 (10), pp. 725-31.
21. K. Jakus, J.E. Ritter, and R.H. Schwillinski: J. Am. Ceram. Soc., 1993, vol. 76 (1), pp. 33-38.
22. P.F. Becher, T.N. Tiegs, J.C. Ogle, and W.H. Warwick: in Fracture Mechanics of Ceramics, R.C. Bradt, A.G. Evans, D.P.H. Hasselman, and F.F. Lange, eds., Plenum Press, New York, NY, 1986 vol. 7, pp. 61-73.
23. M.G. Jenkins, A.S. Kobayashi, K.W. White, and R.C. Bradt: J. Am. Ceram. Soc., 1987, vol. 70 (6), pp. 393-95.
24. K. Zeng, K. Breder, and D. Rowclifie: J. Am. Ceram. Soc., 1993, vol. 76 (7), pp. 1673-80.
25. K.W. White and L. Guazzone: J. Am. Ceram. Soc., 1991, vol. 74 (9), pp. 2280-85.
26. K. Jakus and S.V. Nair: Compos. Sci. Technol., 1990, vol. 37, pp. 279-97.
27. A.G. Evans: J. Am. Ceram. Soc., 1990, vol. 73, pp. 187-206.
28. S.V. Nair, K. Jakus, and C. Ostertag: Ceram. Eng. Sci. Proc., 1988, vol. 9 (7-8), pp. 681-86.
29. S.V. Nair, K. Jakus, and T.J. Lardner: Mech. Mater., 1991, vol. 12 (3-4), pp. 229-44.
30. C.H. Henager, Jr. and R.H. Jones: J. Am. Ceram. Soc., 1994, vol. 77, pp. 2381-94.
31. M.D. Thouless: J. Am. Ceram. Soc., 1988, vol. 71 (6), pp. 408-13.
32. S.V. Nair and T.-J. Gwo: J. Eng. Mater. Technol., 1993, vol. 115, pp. 273-80.
33. C.H. Henager, Jr. and R.H. Jones: Cer. Eng. Sci. Proc., 1992, vol. 13 (7-8), pp. 411-19.
34. C.H. Henager, Jr. and R.H. Jones: Cer. Eng. Sci. Proc., 1993, vol. 14 (7-8), pp. 408-15.
35. C.H. Henager, Jr. and R.H. Jones: in High Temperature Ceramic Matrix Composites: HT-CMC1, Pr. 6th R. Naslain, J. Lamon, and D. Doumeingts, eds., Woodhead Publishing Limited, Cambridge, United Kingdom, 1993, pp. 667-73.
36. C.H. Henager, Jr. and R.H. Jones: Proc. Engineering Foundation Conf. on Critical Issues in the Development of High-Temperature Structural Materials, N.S. Stoloff, D.J. Duquette, and A.F. Giamei, eds., TMS, Warrendale, PA, 1993, pp. 445-53.
37. C.H. Henager, Jr. and R.H. Jones: in Ceramics Transactions, vol. 38, Advances in Ceramic-Matrix Composites, N.P. Bansal, ed., American Ceramics Society, Westerville, OH, 1993, pp. 317-28.
38. A. Bornhauser, K. Kromp, and R.F. Pabst: J. Mater. Sci., 1985, vol. 20, pp. 2586-96.
39. A.G. Evans and R.M. McMeeking: Acta Metall., 1986, vol. 34, pp. 2435-41.
40. D.L. Davidson: Metall. Trans. A, 1992, vol. 23A, pp. 865-79.
41. L. Filipuzzi and R. Naslain: J. Am. Ceram. Soc., 1994, vol. 77 (2), pp. 467-80.
42. G. Simon and A.R. Bunsell: J. Mater. Sci., 1984, vol. 19, pp. 3658-70.
43. J.A. DiCarlo: Compos. Sci. Technol., 1994, vol. 51, pp. 213-22.
44. R.H. Jones, C.H. Henager, Jr., and C.F. Windisch, Jr.: Mater. Sci. Eng., 1995, vol. A198, pp. 103-12.
45. P.F. Tortorelli, S. Nijhawan, L. Riester, and R.A. Lowden: Ceram. Eng. Sci. Proc., 1993, vol. 14 (7-8), pp. 358-66.
46. L. Filipuzzi, G. Camus, R. Naslain, and J. Thebault: J. Am. Ceram. Soc., 1994, vol. 77 (2), pp. 459-66.