Interfacial debonding in laminated titanium matrix composites

Mechanics of Materials

Volumn 22, Issue 4, 1996, Pages 279-290

  Lissenden, Cliff J ^a,b   Herakovich, Carl T ^c  

^a UNIVERSITY OF KENTUCKY   (United States)

^b The Pennsylvania State University   (United States)

^c UNIVERSITY OF VIRGINIA   (United States)

Author keywords

Finite element analysis; Interfacial damage; Lamination theory; Micromechanics; Multiaxial loading; Silicon carbide titanium; Viscoplasticity

Indexed keywords

BONDING; BOUNDARY CONDITIONS; FINITE ELEMENT METHOD; INTERFACES (MATERIALS); LAMINATED COMPOSITES; LOADS (FORCES); MATHEMATICAL MODELS; METALLIC MATRIX COMPOSITES; MICROSTRUCTURE; SILICON CARBIDE; TITANIUM; VISCOPLASTICITY;

INTERFACIAL BONDING; INTERFACIAL DAMAGE; LAMINATED TITANIUM MATRIX COMPOSITES; LAMINATION THEORY; MICROMECHANICAL MODEL; MULTIAXIAL LOADING; VOLUME ELEMENT;

COMPOSITE MICROMECHANICS;

EID: 0030126378     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/0167-6636(95)00031-3     Document Type: Article

References (22)

1. Allen, D.H., R.H. Jones and J.G. Boyd (1994), Micromechanical analysis of a continuous fiber metal matrix composite including the effects of matrix viscoplasticity and evolving damage, J. Mech. Phys. Solids 42, 505.
2. Bodner, S.R. (1987), Review of a unified elastic-viscoplastic theory, in: A.K. Miller, ed., Unified Constitutive Equations for Creep and Plasticity, Elsevier, Amsterdam, p. 273.
3. Bodner, S.R. and Y. Partom (1975), Constitutive equations for elastic-viscoplastic strain-hardening materials, J. Appl. Mech. 42, 385.
4. Eggleston, M.R. (1993), Testing, modeling and analysis of transverse creep in SCS-6/Ti-6Al-4V metal matrix composites at 482°C, Physical Metallurgy Laboratory Report 93CRD163, General Electric Research and Development Center.
5. Hidde, J.S. and C.T. Herakovich (1992), Inelastic response of hybrid composite laminates, J. Compos. Mater. 26, 2.
6. Jansson, S., H.E. Deve and A.G. Evans (1991), The anisotropic mechanical properties of a Ti matrix composite reinforced with SiC fibers, Metall. Trans. A 22, 2975.
7. 6/Ti-15-3 metal matrix composites at room temperature, in: J.M. Kennedy, H.H. Moeller and W.S. Johnson, eds., Thermal and Mechanical Behavior of Metal Matrix and Ceramic Matrix Composites, ASTM STP 1080, American Society for Testing and Materials, Philadelphia, p. 193.
8. Lekhnitskii, S.G. (1981), Theory of Elasticity of an Anisotropic Body, Mir Publishers, Moscow.
9. Lerch, B.A and J.F. Saltsman (1993), Tensile deformation damage in SiC/Ti-15-3 laminates, in: W.W. Stinchcomb and N.E. Ashbaugh, eds., Composite Materials: Fatigue and Fracture, Fourth Volume, ASTM STP 1156, American Society for Testing and Materials, Philadelphia, p. 161.
10. Lissenden, C.J. and C.T. Herakovich (1995), Numerical modelling of damage development and viscoplasticity in metal matrix composites, Comp. Meth. Appl. Mech. Eng. 126, 289.
11. Lissenden, C.J., C.T. Herakovich and M-J. Pindera (1993a), Inelastic Deformation of Metal Matrix Composites, NASA Contractor Report 191522.
12. Lissenden, C.J., M-J. Pindera and C.T. Herakovich (1993b), Response of SiC/Ti tubes under biaxial loading in the presence of damage, in: D.H. Allen and D.C. Lagoudas, eds., Damage Mechanics in Composites, ASME-AMD-Vol. 150/AD-Vol. 32, American Society of Mechanical Engineers, New York, p. 73.
13. Lissenden, C.J., M-J. Pindera and C.T. Herakovich (1994), Stiffness degradation of SiC/Ti tubes subjected to biaxial loading, Comp. Sci. Technol. 50, 23.
14. Lissenden, C.J., C.T. Herakovich and M-J. Pindera (1995a), Response of SiC/Ti under combined loading - Part I: Theory and experiment for imperfect bonding, J. Compos. Mater., 29, 130.
15. Lissenden, C.J., C.T. Herakovich and M-J. Pindera (1995b), Response of SiC/Ti under combined loading - Part II: Room temperature creep effects, J. Compos. Mater. 29, 1403.
16. Lissenden, C.J., C.T. Herakovich and M-J. Pindera (1996a), Inelastic deformation of TMC under multiaxial loading, in: W.S. Johnson, J.M. Larsen and B.N. Cox, eds., Life Prediction Methodology for Titanium Matrix Composites, ATSM STP 1253, American Society for Testing and Materials, Philadelphia, in press.
17. Lissenden, C.J., B.A. Lerch and C.T. Herakovich (1996b), Response of SiC/Ti under combined loading - Part III: Microstructural evaluation, J. Compos. Mater. 30, 84.
18. Majumdar, B.S. and G.M. Newaz (1992), Inelastic deformation of metal matrix composites: plasticity and damage mechanisms, Philos. Mag. A 66, 187.
19. McGee, J.D. and C.T. Herakovich (1992), Micromechanics of fiber/matrix debonding, University of Virginia, Report AM-92-01.
20. Needleman, A. (1987), A continuum model for void nucleation by inclusion debonding, J. Appl. Mech. 54, 525.
21. Nimmer, R.P., R.J. Bankert, E.S. Russel, G.A. Smith and P.K. Wright (1991), Micromechanical modeling of fiber/matrix interface effects in transversely loaded SiC/Ti-6-4 metal matrix composites, J. Comp. Tech. Res. 13, 3.
22. Tvergaard, V. (1990), Effect of fibre debonding in a whisker-reinforced metal, Mater. Sci. Eng. A 125, 203.