High temperature/high frequency fatigue crack growth in titanium metal matrix composites

ASTM Special Technical Publication

Volumn 1253, Issue , 1996, Pages 137-163

  Zheng, Dian ^a   Ghonem, Hamouda ^a  

^a University of Rhode Island   (United States)

Author keywords

Bridging fiber stress; Crack bridging; Crack opening displacement; Fatigue (materials); Fatigue crack growth rate; Frictional shear stress; Life prediction; Modeling; Thermal aging; Titanium; Titanium alloys; Titanium matrix composites

Indexed keywords

AGING OF MATERIALS; COMPOSITE MICROMECHANICS; CRACK PROPAGATION; FATIGUE OF MATERIALS; FATIGUE TESTING; FRACTURE MECHANICS; HEAT TREATMENT; HIGH TEMPERATURE EFFECTS; MATHEMATICAL MODELS; SERVICE LIFE; SHEAR STRESS; TITANIUM ALLOYS;

CRACK LENGTH; CRACK OPENING DISPLACEMENT; HIGH TEMPERATURE/HIGH FREQUENCY FATIGUE CRACK GROWTH;

METALLIC MATRIX COMPOSITES;

EID: 0030124265     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp18222s     Document Type: Article

References (41)

1. Marshall, D. B., Cox, B. N., and Evans, A. G., "The Mechanics of Matrix Cracking in Brittle-Matrix Fiber Composites," Acta Metallurgica Vol. 33, 1985, pp. 2013-2021.
2. McCartney, L. N., "Mechanics of Matrix Cracking in Brittle-Matrix Fiber-reinforced Composites," Proceedings, Royal Society of London, Vol. 409A, 1987, pp. 329-350.
3. McMeeking, R. M. and Evans, A. G., "Matrix Fatigue Cracking in Fiber Composites," Mechanics of Materials, Vol. 9, 1990, pp. 217-227.
4. Ghosn, L., Kantzos, P., and Telesman, J., "Modeling of Crack Bridging in a Unidirectional Metal Matrix Composite," International Journal of Fracture, Vol. 54, 1992, pp. 345-357.
5. Davidson, D. L., "The Micromechanics of Fatigue Crack Growth at 25°C in Ti-6A1-4V Reinforced with SCS-6 Fibers," Metallurgical Transactions, Vol. 23A, 1992, pp. 865-879.
6. Telesman, J., Ghosn, L. J., and Kantzos, P., "Methodology for Prediction of Fiber Bridging Effects in Composites," Journal of Composites Technology & Research, Vol. 15, 1993, pp. 34-241.
7. Walls, D. P., Bao, G., and Zok, W., "Mode I Fatigue Cracking in a Fiber Reinforced Metal Matrix Composite," Acta Metallurgica Materials, Vol. 41, 1993, pp. 2061-2071.
8. Chiang, Y.-C., Wang, A. S., and Chou, T.-W., "On Matrix Cracking in Fiber Reinforced Ceramics," Journal of the Mechanics and Physics of Solids, Vol. 41, 1993, pp. 1137-1154.
9. Telesman, J., Kantzos, P., and Brewer, D., "In Situ Fatigue Loading Stage Inside Scanning Electron Microscope," Lewis Structures Technology-1988, NASA CP 3003, NASA Lewis Research Center, Cleveland, OH, Vol. 3, May 1988, pp. 161-172.
10. Hartman, G. A. and Nicholas, T., "An Enhanced Laser Interferometer for Precise Displacement Measurements. Experimental Techniques," Society of Experimental Mechanics, Vol. 11, No. 2, 1987, pp. 24-26.
11. Jira, J. R. and Kleismet, R., "Crack Opening Displacement Measurements in Unidirectional Metal Matrix Composites," to be submitted for publication.
12. John, R., Kaldon, S. G., and Ashbaugh, N. E., "Applicability of Fiber Bridging Models to Describe Crack Growth in Unidirectional Titanium Matrix Composites," Titanium Metal Matrix Composites II, Proceedings, Titanium Metal Matrix Composites II Workshop, June, 1993, WL-TR-93-4105, Materials Directorate, Wright-Patterson AFB, OH, pp. 270-290.
13. Bakuckas, J. G., Jr. and Johnson, W. S., "Application of Fiber Bridging Models to Fatigue Crack Growth in Unidirectional Titanium Matrix Composites," Journal of Composites Technology & Research, Vol. 15, 1993, pp. 242-255.
14. Chan, K. S., "Effects of Interface Degradation on Fiber Bridging of Composite Fatigue Cracks," Acta Metallurgica Materials, Vol. 41, 1993, pp. 761-768.
15. Thouless, M. D., Sbaizro, O., Sigl, L. S., and Evans, A. G., "Effect of Interface Mechanical Properties on Pullout in a SiC-Fiber-Reinforced Lithium Aluminum Silicate Glass-Ceramic," Journal, American Ceramics Society, Vol. 72, 1989, pp. 525-532.
16. Marshall, D. B. and Oliver, W. C., "Measurement of Interfacial Mechanical Properties in Fiber-Reinforced Ceramic Composites," Journal, American Ceramic Society, Vol. 70, 1987, pp. 542-548.
17. Mackin, T. J., Warren, P. D., and Evans, A. G., "Effects of Fiber Roughness on Interface Sliding in Composites," Acta Metallurgica Materials, Vol. 40, 1992, pp. 1251-1257.
18. Eldridge, J., "Fiber Push-Out Testing of Intermetallic Matrix Composites at Elevated Temperatures," Proceedings, Materials Research Society Symposium, Vol. 273, D. Miracle, J. Graves, and D. Anton, Eds., Pittsburgh, 1992, pp. 325-330.
19. Marshall, D. B., Shaw, M. C., Morris, W. L., and Graves, J., "Interfacial Properties and Residual Stresses in Titanium and Titanium Aluminide Matrix Composites," Proceedings, Workshop for Titanium Matrix Composites, P. R. Smith and W. C. Revelos, Eds., Wright-Patterson AFB, OH, 1991, pp. 329-347.
20. Watson, M. C. and Clyne, T. W., "The Use of Single Fiber Pushout Testing to Explore Interfacial Mechanics in SiC Monofilament-Reinforced Ti - II. Application of the Tests to Composite Material," Acta Metallurgica Materials, Vol. 40, 1992, pp. 141-148.
21. Kantzos, P., Ghosn, L., and Telesman, J., "The Effect of Degradation of the Interface and Fiber Properties on Crack Bridging," HITEMP Review 1992, Vol. II, NASA Lewis Research Center, Cleveland, OH, 1992, pp. 32-1-32-14.
22. Warren, P. D., Mackin, T. J., and Evans, A. G., "Design, Analysis and Application of An Improved Push-Through Test for the Measurement of Interface Properties in Composites," Acta Metallurgica Materials, Vol. 40, 1992, pp. 1243-1249.
23. Ghonem, H., Zheng, D., Tamin, M. N., and Zhang, T., "Investigation of High Temperature Crack Bridging Mechanisms in SM1240/TIMETAL-21S," Report MML-94-2, Mechanics of Materials Laboratory, Department of Mechanical Engineering, University of Rhode Island, April 1994.
24. Cox, B. N. and Marshall, D. B., "The Determination of Crack Bridging Forces," International Journal of Fatigue, Vol. 49, 1991, pp. 159-176.
25. Clyne, T. W. and Withers, P. J., An Introduction to Metal Matrix Composites, Cambridge University Press, London, 1993.
26. Schulte, K. and Minoshima, K., "Mechanisms of Fracture and Failure in Metal Matrix Composites," Metal Matrix Composites - Processing, Microstructure and Properties, N. Hansen et al., Eds., RISO National Laboratory, Roskilde, Denmark, 1991, pp. 129-147.
27. Ghonem, H., Wen, Y., Zheng, D., Thompson, M., and Linsey, G., "Effects of Temperature and Frequency on Fatigue Crack Growth in Ti-β21S Monolithic Laminate," Materials Science and Engineering, Vol. 161, 1993, pp. 45-53.
28. 2-Coated SiC Monofilament," Metal Matrix Composites - Processing, Microstructure and Properties, N. Hansen et al., Eds., RISO National Laboratory, Roskilde, Denmark, 1991, pp. 735-740.
29. Osborne, D. and Ghonem, H., "On the Interfacial Reaction Kinetics of TIMETAL-21S Reinforced with SM1240 and SCS-6 Continuous Fibers," Report MML-95-1, Mechanics of Materials Laboratory, Department of Mechanical Engineering, University of Rhode Island, March 1995.
30. McCartney, L. N., "General Solution of a Certain Mixed Boundary Value Crack Problem," International Journal of Engineering Science, Vol. 21, 1983, pp. 131-142.
31. Sneddon, I. N. and Lowengrub, M., Crack Problems in the Classical Theory of Elasticity, Wiley, New York, 1969.
32. Marti, J. T., "An Algorithm for Computing Minimum Norm Solutions of Fredholm Integral Equations of the First Kind," SIAM Journal on Numerical Analysis, Vol. 15, 1978, pp. 1071-1076.
33. Baker, C. T. H., The Numerical Treatment of Integral Equations, Oxford University Press, Oxford, UK, 1977.
34. Le petitcorps, Y., Lahaye, M., Pailler, R., and Naslain, R., "Modem Boron and SiC CVD Filaments: A Comparative Study," Composites Science and Technology, Vol. 32, 1988, pp. 31-55.
35. Budiansky, B., Hutchinson, J. W., and Evans, A. G., "Matrix Fracture in Fiber-Reinforced Ceramics," Journal of the Mechanics and Physics of Solids, Vol. 34, 1986, pp. 167-189.
36. Zheng, D. and Ghonem, H., "A Model for High Temperature Fatigue Crack Bridging in Metal Matrix Composites," Report MML-95-2, Mechanics of Materials Laboratory, Department of Mechanical Engineering, University of Rhode Island, July 1995.
37. Ghonem, H., Wen, Y., and Zheng, D., "An Interactive Simulation Technique to Determine the Internal Stress States in Fiber Reinforced Metal Matrix Composites," Materials Science and Engineering, Vol. A177, 1994, pp. 125-134.
38. Zhang, T. and Ghonem, H., "Time-Dependent Fatigue Crack Growth in Titanium Metal Matrix Composites," International Journal of Fatigue and Fracture of Engineering Materials, Vol. 18, No. 11, 1995, pp. 1249-1262.
39. Buesking, K. W., Young, J. L., and Reynolds, G. H., "Status of Advanced Filament Development for Titanium Alloy and Titanium Intermetallic Matrix Composites," Proceedings, Workshop for Titanium Matrix Composites, P. R. Smith and W. C. Revelos, Eds., Wright-Patterson AFB, OH, 1991, pp. 25-64.
40. Blackman, L. C. F., Modern Aspects of Graphite Technology, Academic Press Inc., London, 1970.
41. Tamin, M. N., Zheng, D., and Ghonem, H., "The Determination of the Stress State Variation during High Temperature Crack Bridging Process in MMCs," Damage of Metal Matrix Composites, 3rd Symposium on Advances in Fatigue, Lifetime Predictive Techniques, Montreal, Canada, May 1994.