Inelastic deformation of titanium matrix composites under multiaxial loading

ASTM Special Technical Publication

Volumn 1253, Issue , 1996, Pages 257-277

  Lassenden, Cliff J ^a,c   Herakovich, Carl T ^b   Pindera, Marek Jerzy ^b  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

^b UNIVERSITY OF VIRGINIA   (United States)

^c UNIVERSITY OF KENTUCKY   (United States)

Author keywords

Fatigue; Finite element analysis; Interfacial debonding; Lamination theory; Life prediction; Materials; Micromechanics; Modeling; Room temperature creep; Silicon carbide titanium; Titanium; Titanium alloys; Titanium matrix composites; Viscoplasticity

Indexed keywords

COMPOSITE MICROMECHANICS; DEFORMATION; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; INTERFACES (MATERIALS); LAMINATED COMPOSITES; LOADS (FORCES); SERVICE LIFE; SILICON CARBIDE; THERMAL STRESS; TITANIUM ALLOYS; VISCOPLASTICITY;

INELASTIC DEFORMATION; LAMINATION THEORY; MULTIAXIAL LOADING;

METALLIC MATRIX COMPOSITES;

EID: 0030123550     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Article

References (39)

1. Johnson, W. S., Lubowinski, S. J., and Highsmith, A. L., "Mechanical Characterization of Unnotched SCS6/Ti-15-3 Metal Matrix Composites at Room Temperature," Thermal and Mechanical Behavior of Metal Matrix and Ceramic Matrix Composites, ASTM STP 1080, J. M. Kennedy, H. H. Moeller, and W. S. Johnson, Eds., American Society for Testing and Materials, Philadelphia, 1990, pp. 193-218.
2. Nimmer, R. P., Bankert, R. J., Russel, E. S., Smith, G. A., and Wright, P. K., "Micromechanical Modeling of Fiber/Matrix Interface Effects in Transversely Loaded SiC/Ti-6-4 Metal Matrix Composites," Journal of Composites Technology and Research, Vol. 13, 1990, pp. 3-13.
3. Lerch, B. A. and Saltsman, J. F., "Tensile Deformation in SiC/Ti-15-3 Laminates," Composite Materials: Fatigue and Fracture, Fourth Volume, ASTM STP 1156, W. W. Stinchcomb and N. E. Ashbaugh, Eds., American Society for Testing and Materials, Philadelphia, 1993, pp. 161-175.
4. Majumdar, B. S. and Newaz, G. M., "Inelastic Deformation of Metal Matrix Composites: Plasticity and Damage Mechanisms," Philosophical Magazine, Vol. A66, 1992, pp. 187-212.
5. Majumdar, B. S., Newaz, G. M., and Ellis, J. R., "Evolution of Damage and Plasticity in Titanium-Based, Fiber-Reinforced Composites," Metallurgical Transactions A, Vol. 24A, 1993, pp. 1597-1610.
6. Aboudi, J., "Constitutive Equations for Elastoplastic Composites with Imperfect Bonding," International Journal of Plasticity, Vol. 4, 1988, pp. 103-125.
7. Hashin, Z., "Thermoelastic Properties of Fiber Composites with Imperfect Interface," Mechanics of Materials, Vol. 8, 1990, pp. 333-348.
8. Benveniste, Y., Dvorak, G. J., and Chen, T., "Stress Fields in Composites with Coated Inclusions," Mechanics of Materials, Vol. 7, 1989, pp. 305-317.
9. Chen, T., Dvorak, G. J., and Benveniste, Y., "Stress Fields in Composites Reinforced by Coated Cylindrically Orthotropic Fibers," Mechanics of Materials, Vol. 9, 1990, pp. 17-32.
10. Benveniste, Y., Dvorak, G. J., and Chen, T., "On Effective Properties of Composites with Coated Cylindrically Orthotropic Fibers," Mechanics of Materials, Vol. 12, 1991, pp. 289-297.
11. Herakovich, C. T. and Hidde, J. S., "Response of Metal Matrix Composites with Imperfect Bonding," Ultramicroscopy, Vol. 40, 1992, pp. 215-228.
12. Adams, D. F., "A Micromechanical Analysis of Crack Propagation in an Elastoplastic Composite Material," Fiber Science and Technology, Vol. 7, 1974, pp. 237-256.
13. Aboudi, J., "Micromechanical Analysis of Fibrous Composites with Coulomb Frictional Slippage Between the Phases," Mechanics of Materials, Vol. 8, 1989, pp. 103-115.
14. Wisnom, M. R., "Factors Affecting the Transverse Tensile Strength of Unidirectional Continuous Silicon Carbide Fiber Reinforced 6061 Aluminum," Journal of Composite Materials, Vol. 24, 1990, pp. 707-726.
15. Achenbach, J. D. and Zhu, H., "Effect of Interphases on Micro and Macromechanical Behavior of Hexagonal-Array Fiber Composites," Journal of Applied Mechanics, Vol. 57, 1990, pp. 956-963.
16. Zhu, H. and Achenbach, J. D., "Radial Matrix Cracking and Interphase Failure in Transversely Loaded Fiber Composites," Mechanics of Materials, Vol. 11, 1991, pp. 347-356.
17. Nimmer, R. P., "Fiber-Matrix Interface Effects in the Presence of Thermally Induced Residual Stresses," Journal of Composites Technology & Research, Vol. 12, 1990, pp. 65-75.
18. Brust, F. W., Newaz, G. M., and Majumdar, B. S., "Constitutive Response Analysis of Metal Matrix Composites via the Unit Cell Model," Composite Materials: Testing and Design, Eleventh Volume, ASTM STP 1206, American Society for Testing and Materials, Philadelphia, 1993.
19. Needleman, A., "A Continuum Model for Void Nucleation by Inclusion Debonding," Journal of Applied Mechanics, Vol. 54, 1987, pp. 525-531.
20. McGee, J. D. and Herakovich, C. T., "Micromechanics of Fiber/Matrix Debonding," Report AM-92-01, University of Virginia, Charlottesville, VA, 1992.
21. Lissenden, C. J. and Herakovich, C. T., "Numerical Modeling of Damage Development and Viscoplasticity in Metal Matrix Composites," Computer Methods in Applied Mechanics and Engineering, Vol. 126, 1995, pp. 289-303.
22. Eggleston, M. R., "Testing, Modeling and Analysis of Transverse Creep in SCS-6/Ti-6Al-4V Metal Matrix Composites at 482°C," Report 93CRD163, Physical Metallurgy Laboratory, General Electric Research and Development Center, Schenectady, NY, 1993.
23. Allen, D. H., Jones, R. H., and Boyd, J. G., "Micromechanical Analysis of a Continuous Fiber Metal Matrix Composite Including the Effects of Matrix Viscoplasticity and Evolving Damage," Journal of the Mechanics and Physics of Solids, Vol. 42, 1994, pp. 505-520.
24. Lissenden, C. J., Herakovich, C. T., and Pindera, M.-J., "Inelastic Deformation of Metal Matrix Composites," NASA Contractor Report 191522, Langley Research Center, Hampton, VA, 1993.
25. Boyd, J. G., Constanzo, F., and Allen, D. H., "A Micromechanics Approach for Constructing Locally Averaged Damage Dependent Constitutive Equations in Inelastic Composites," International Journal of Damage Mechanics, Vol. 2, 1993, pp. 209-228.
26. Bodner, S. R. and Partom, Y., "Constitutive Equations for Elastic-Viscoplastic Strain-Hardening Materials," Journal of Applied Mechanics, Vol. 42, 1975, pp. 385-389.
27. Bodner, S. R., "Review of a Unified Elastic-Viscoplastic Theory," Unified Constitutive Equations for Plastic Deformation and Creep of Engineering Alloys, A. K. Miller, Ed., Eisevier, Amsterdam, 1987, pp. 273-301.
28. Tvergaard, V., "Effect of Fiber Debonding in a Whisker-Reinforced Metal," Materials Science and Engineering, Vol. A125, 1990, pp. 203-213.
29. Hidde, J. S. and Herakovich, C. T., "Inelastic Response of Hybrid Composite Laminates," Journal of Composite Materials, Vol. 26, 1992, pp. 2-19.
30. Jones, R. M., Mechanics of Composite Materials, McGraw-Hill, New York, 1967.
31. Lekhnitskii, S. G., Theory of Elasticity of an Anisotropic Body, Mir Publishers, Moscow, 1981 (translated from the revised 1977 Russian edition).
32. Lissenden, C. J., Herakovich, C. T., and Pindera, M.-J., "Response of SiC/Ti Under Combined Loading - Part I: Theory and Experiment for Imperfect Bonding," Journal of Composite Materials, Vol. 29, 1995, pp. 130-155.
33. Povirk, G. L., Needleman, A., and Nutt, S. R., "An Analysis of the Effect of Residual Stresses on Deformation and Damage Mechanisms in Al-SiC Composites," Materials Science and Engineering, Vol. A132, 1991, pp. 31-38.
34. Lissenden, C. J., Herakovich, C. T., and Pindera, M.-J., "Stiffness Degradation of SiC/Ti Tubes Subjected to Biaxial Loading," Composites Science and Technology, Vol. 50, 1994, pp. 23-36.
35. Derstine, M. S. and Pindera, M.-J., "Nonlinear Response of Composite Tubes under Combined Thermomechanical Loading," Composites and Other New Materials for PVP: Design and Analysis Considerations, ASME PVP-Vol. 174, D. Hui, T. J. Kozik, G. E. O. Widera, and M. Shiratori, Eds., American Society of Mechanical Engineers, New York, 1989, pp. 19-28.
36. Lerch, B. A., personal communication, 1993.
37. Kaiser, J., "Untersuchungen uber das Auftreten Gerauschen Biem Zugversuch," PhD thesis, Technisch Hochschule, Munich, 1950.
38. Lissenden, C. J., Herakovich, C. T., and Pindera, M.-J., "Response of SiC/Ti Tubes Under Biaxial Loading in the Presence of Damage," Damage Mechanics in Composites, ASME-AMD-Vol. 150/AD-Vol. 32, D. H. Allen and D. C. Lagoudas, Eds., American Society of Mechanical Engineers, New York, 1992, pp. 73-90.
39. Lissenden, C. J., Herakovich, C. T., and Pindera, M.-J., "Response of SiC/Ti Under Combined Loading - Part II: Room Temperature Creep Effects," Journal of Composite Materials, Vol. 29, 1995, pp. 1403-1417.