A comparison of analysis tools for predicting the inelastic cyclic response of cross-ply titanium matrix composites

ASTM Special Technical Publication

Volumn 1253, Issue , 1996, Pages 297-327

  Kroupa, Joseph L ^a   Neu, Richard W ^b,c   Nicholas, Theodore ^b,c   Coker, Demirkan ^a   Roberison, D Dave ^d   Mall, Shankar ^d  

^a UNIVERSITY OF DAYTON RESEARCH INSTITUTE   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

^c GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^d AIR FORCE INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Cross ply composites; Fatigue (materials); Laminates; Life prediction; Metal matrix composite; Micromechanical model; Modeling; Thermomechanical fatigue; Titanium; Titanium alloys; Titanium matrix composites

Indexed keywords

COMPOSITE MICROMECHANICS; COMPUTER SIMULATION; COMPUTER SOFTWARE; FATIGUE OF MATERIALS; FATIGUE TESTING; HYSTERESIS; LAMINATED COMPOSITES; RESIDUAL STRESSES; SERVICE LIFE; STRAIN; THERMAL STRESS; TITANIUM ALLOYS;

CROSS PLY LAMINATES; INELASTIC CYCLIC STRAIN; STRAIN RATCHETTING; THERMOMECHANICAL FATIGUE;

METALLIC MATRIX COMPOSITES;

EID: 0030122921     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Review

References (40)

1. Nicholas, T., Russ, S. M., Neu, R. W., and Schehl, N., "Life Prediction of a [0/90] Metal Matrix Composite Under Isothermal and Thermomechanical Fatigue," in this volume.
2. Castelli, M. G., "Thermomechanical Fatigue Damage/Failure Mechanisms in SCS-6/TIMETAL 21S [0/90], Composite," NASA CR-191115, NASA Lewis Research Center, Cleveland, OH, 1993.
3. Neu, R. W. and Nicholas, T., "Effect of Laminate Orientation on the Thermomechanical Fatigue Behavior of a Titanium Matrix Composite," Journal of Composites Technology & Research, Vol. 16, No. 3, 1994, pp. 214-224.
4. Mirdamadi, M., Johnson, W. S., Bahei-El-Din, Y. A., and Castelli, M. G., "Analysis of Thermomechanical Fatigue of Unidirectional Titanium Metal Matrix Composites," NASA Technical Memorandum 104105, NASA Langley Research Center, Hampton, VA, July 1991.
5. Russ, S. M., Nicholas, T., Hanson, D. G., and Mall, S., "Isothermal and Thermomechanical Fatigue of Cross-Ply SCS-6/β21-S," Science and Engineering of Composite Materials, Vol. 3, 1994, pp. 177-189.
6. Mall, S. and Schubbe, J. J., "Thermomechanical Fatigue Behavior of a Cross-Ply SCS-6/Ti-15-3 Metal Matrix Composite," Composite Science and Technology, Vol. 50, 1994, pp. 49-57.
7. Johnson, W. S., Lubowinski, and Highsmith, A. L., "Mechanical Characterization of Unnotched SCS-6/T1-15-3 Metal Matrix Composites at Room Temperatures," Thermal and Mechanical Behavior of Metal Matrix and Ceramic Matrix Composites, ASTM STP 1080, J. M. Kennedy, H. H. Moeller, and W. S. Johnson, Eds., American Society for Testing and Materials, Philadelphia, 1990, pp. 193-218.
8. Nimmer, R. P., "Fiber-Matrix Interface Effects in the Presence of Thermally Induced Residual Stress," Journal of Composites Technology and Research, Vol. 12, No. 2, 1990, pp. 65-75.
9. Nimmer, R. P., Bankert, R. J., Russell, E. S., Smith, G. A., and Wright, P. K., "Micromechanical Modeling of Fiber/Matrix Interface Effects in Transversely Loaded SiC/Ti-6-4 Metal Matrix Composites," Journal of Composites Technology and Research, Vol. 13, No. 1, 1991, pp. 3-13.
10. Mall, S., Hanson, D. G., Nicholas, T., and Russ, S. M., "Thermomechanical Fatigue Behavior of a Cross-Ply SCS-6/β21-S Metal Matrix Composite," Constitutive Behavior of High Temperature Composites, MD-Vol. 40, B. S. Majumdar, G. M. Newaz, and S. Mall, Eds., American Society of Mechanical Engineers, New York, 1992, pp. 91-106.
11. Sherwood, J. A. and Boyle, M. J., "Investigation of the Thermomechanical Response of a Titanium-Aluminide/Silicon-Carbide Composite Using a Unified State Variable Model in ADINA," Computers and Structures, Vol. 40, 1991, pp. 243-255.
12. Russ, S. M., Nicholas, T., Bates, M., and Mall, S., "Thermomechanical Fatigue of SCS-6/Ti-24Al-11Nb Metal Matrix Composite," Failure Mechanisms in High Temperature Composite Materials, AD-Vol. 22/AMD-Vol. 122, G. K. Haritos, G. Newaz, and S. Mall, Eds., American Society of Mechanical Engineers, New York, 1991, pp. 37-43.
13. Bigelow, C. A., Johnson, W. S., and Naik, R. A., "A Comparison of Various Micromechanics Models for Metal Matrix Composites," Mechanics of Composite Materials and Structures, J. N. Reddy and J. L. Teply, Eds., American Society of Mechanical Engineers, New York, 1989, pp. 21-31.
14. Dvorak, G. J. and Bahei-El-Din, Y. A., "Plasticity Analysis of Fibrous Composites," Journal of Applied Mechanics, Vol. 49, 1982, pp. 327-335.
15. Bahei-El-Din, Y. A., "Plasticity Analysis of Fibrous Composite Laminates Under Thermomechanical Loads," Thermal and Mechanical Behavior of Metal Matrix and Ceramic Matrix Composites, ASTM STP 1080, J. M. Kennedy, H. H. Moeller, and W. S. Johnson, Eds., American Society for Testing and Materials, Philadelphia, 1990, pp. 20-39.
16. Murthy, P. L. N. and Chamis, C. C., "METal Matrix Composite ANalyzer (METCAN): Theoretical Manual," NASA Technical Memorandum 106025, NASA Lewis Research Center, Cleveland, OH, Feb. 1993.
17. Chamis, C. C. and Hopkins, D. A., "Thermoviscoplastic Nonlinear Constitutive Relationships for Structural Analysis of High-Temperature Metal Matrix Composites," Testing Technology of Metal Matrix Composites, ASTM STP 964, P. R. DiGiovanni and N. R. Adsit, Eds., American Society for Testing and Materials, Philadelphia, 1988, pp. 177-196.
18. Hopkins, D. A. and Chamis, C. C., "A Unique Set of Micromechanics Equations for High-Temperature Metal Matrix Composites," Testing Technology of Metal Matrix Composites, ASTM STP 964, P. R. DiGiovanni and N. R. Adsit, Eds., American Society for Testing and Materials, Philadelphia, 1988, pp. 159-176.
19. Murthy, P. L. N., Hopkins, D. A., and Chamis, C. C., "Metal Matrix Composite Micromechanics: In-situ Behavior Influence on Composite Properties," Mechanics of Composite Materials and Structures, J. N. Reddy and J. L. Teply, Eds., American Society of Mechanical Engineers, New York, 1989, pp. 41-48.
20. Coker, D., Ashbaugh, N. E., and Nicholas, T., "Analysis of the Thermomechanical Fatigue Behavior of [0] and [0/90] SCS-6/TIMETAL ®21S Composites," Thermomechanical Behavior of Advanced Structural Materials, AD-Vol. 34, AMD-Vol. 173, W. F. Jones, Ed., American Society of Mechanical Engineers, New York, 1993, pp. 1-16.
21. Neu, R. W., Coker, D., and Nicholas, T., "Cyclic Behavior of Unidirectional and Cross-Ply Titanium Matrix Composites," International Journal of Plasticity, submitted for publication.
22. Aboudi, J., "A Continuum Theory for Fiber-Reinforced Elastic-Viscoplastic Composites," International Journal of Engineering and Science, Vol. 20, No. 5, 1982, pp. 605-621.
23. Aboudi, J., "Closed Form Constitutive Equations for Metal Matrix Composites," International Journal of Engineering and Science, Vol. 25, No. 9, 1987, pp. 1229-1240.
24. Aboudi, J., "Micromechanical Analysis of Composites by the Method of Cells," Applied Mechanics Review, Vol. 42, No. 7, July 1989, pp. 193-221.
25. Aboudi, J., Hidde, J. S., and Herakovich, C. T., "Thermo-mechanical Response Predictions for Metal Matrix Composite Laminates," Mechanics of Composites at Elevated and Cryogenic Temperatures, AMD-Vol. 118, American Society of Mechanical Engineers, New York, 1991, pp. 1-8.
26. Robertson, D.D. and Mall, S., "Micromechanical Relations for Fiber-Reinforced Composites Using the Free Transverse Shear Approach," Journal of Composites Technology & Research, Vol. 15, No. 3, 1993, pp. 181-192.
27. Robertson, D. and Mall, S., "Micromechanical Analysis for Thermoviscoplastic Behavior of Unidirectional Fibrous Composites," Composites Science and Technology, accepted for publication.
28. Robertson, D. D., "A Nonlinear Three-Dimensional Micromechanics Model for Fiber-Reinforced Laminated Composites," Ph.D. thesis, AF1T/DS/AA/93-3, Air Force Institute of Technology, Wright-Patterson AFB, OH, 1993.
29. Chan, K. S., Bodner, S. R., and Lindholm, U. S., "Phenomenological Modeling of Hardening and Thermal Recovery in Metals," Journal of Engineering Materials and Technology, Vol. 110, Jan. 1988, pp. 1-8.
30. Neu, R. W., "Nonisothermal Material Parameters for the Bodner-Partom Model," Material Parameter Estimation for Modern Constitutive Equations, MD-Vol. 43/AMD-Vol. 168, L. A. Bertram, S. B. Brown, and A. D. Freed, Eds., American Society of Mechanical Engineers, New York, 1993, pp. 211-226.
31. Eisenberg, M. A. and Yen, C. F., "A Theory of Multiaxial Anisotropic Viscoplastic," Journal of Applied Mechanics, Vol. 48, 1981, pp. 276-284.
32. Mirdamadi, M. and Johnson, W. S., "Stress-strain Analysis of a [0/90]2s Titanium Matrix Laminate Subjected to a Generic Hypersonic Flight Profile," NASA TM 107584, NASA Langley Research Center, Hampton, VA, March 1992.
33. Bahei-El-Din, Y. A., Shah, R. S., and Dvorak, G. J., "Numerical Analysis of the Rate-Dependent Behavior of High Temperature Fibrous Composites," Proceedings, Symposium on Mechanics of Composites at Elevated and Cryogenic Temperatures, ASME Applied Mechanics Division Meeting, Columbus, OH, 16-19 June 1991, pp. 67-78.
34. Coker, D. and Ashbaugh, N.E., "Elastic-Plastic Finite-Difference Analysis of Unidirectional Composites Subjected to Thermomechanical Cyclic Loading," WL-TR-93-4043, Wright Laboratory, Wright-Patterson AFB, OH, 1992.
35. Coker, D., Ashbaugh, N. E., and Nicholas, T., "Analysis of Thermomechanical Cyclic Behavior of Unidirectional Metal Matrix Composites," Thermomechanical Fatigue Behavior of Materials, ASTM STP 1186, H. Sehitoglu, Ed., American Society for Testing and Materials, Philadelphia, 1993, pp. 50-69.
36. Nicholas, T., Kroupa, J. L., and Neu, R. W., "Analysis of a [0/90] Metal Matrix Composite Under Thermomechanical Fatigue Loading," Composites Engineering, Vol. 3, No. 7-8, 1993, pp. 675-689.
37. Bigelow, C. A., "Thermal Residual Stresses in a Silicon-Carbide/Titanium [0/90] Laminate," Journal of Composites Technology and Research, Vol. 15, 1993, pp. 304-310.
38. Kroupa, J. K. and Neu, R. W., "Implementation of a Nonisothermal Unified Inelastic-Strain Theory into ADINA6.0 for a Titanium Alloy-Users Guild," WL-TR-93-4005, Wright Laboratory, Wright-Patterson AFB, OH, 1993.
39. Hillmer, N.J., "Thermal Expansion of High-Modulus Fibers," International Journal of Thermophysics, Vol. 12, 1991, pp. 741-750.
40. Nicholas, T. and Ahmad, J., "Modeling Fiber Breakage in a Metal Matrix Composite," Composites Science and Technology, Vol. 52, 1994, pp. 29-38.