Fiber-matrix micromechanics and microstructural observations under tensile and cyclic loading

ASTM Special Technical Publication

Volumn 1253, Issue , 1996, Pages 43-57

  Davidson, David L ^a  

^a SOUTHWEST RESEARCH INSTITUTE   (United States)

Author keywords

Bridging zone fiber stress distribution; Fatigue (materials); Fatigue crack growth; Fiber stress; In situ measurements; Life prediction; Modeling; Stereoimaging; Stress concentration; Titanium; Titanium alloys; Titanium matrix composites

Indexed keywords

COMPOSITE MICROMECHANICS; CRACK PROPAGATION; FATIGUE OF MATERIALS; FIBER REINFORCED METALS; LOADS (FORCES); MATHEMATICAL MODELS; METALLOGRAPHIC MICROSTRUCTURE; SERVICE LIFE; STRESS ANALYSIS; STRESS CONCENTRATION; STRESS INTENSITY FACTORS; TITANIUM ALLOYS;

BRIDGING ZONE FIBER STRESS DISTRIBUTION; CYCLIC LOADS; FIBER MATRIX MICROMECHANICS; TENSILE LOADS;

METALLIC MATRIX COMPOSITES;

EID: 0030121209     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp18217s     Document Type: Article

References (23)

1. Marshall, D. B. and Oliver, W. C., "Measurement of Interfacial Mechanical Properties in Fiber Reinforced Ceramic Composites," Journal, American Ceramics Society, Vol. 70, 1987, pp. 542-548.
2. Hsueh, C.-H., "Interfacial Debonding and Fiber Pull-Out Stresses of Fiber Reinforced Composites," Materials Science and Engineering, Vol. A123, 1990, pp. 1-11.
3. Hsueh, C.-H., "Interfacial Friction Analysis for Fiber Reinforced Composites during Fiber Push Down (Indentation)," Journal of Materials Science, Vol. 25, 1990, pp. 818-828.
4. Davidson, D. L. in Scanning Electron Microscopy/1979/II, Sanning Electron Microscopy, O'Hare, IL, 1979, pp. 79-86.
5. Franke, E. A., Wenzel, D. J., and Davidson, D. L., "Measurement of Microdisplacements by Machine Vision Photogrammetry (DISMAP)," Review of Scientific Instruments, Vol. 62, 1991, pp. 1270-1279.
6. Davidson, D. L. and Nagy, A., "A Low Frequency Cyclic Loading Stage for the SEM," Journal of Physics F, Vol. 11, 1978, pp. 207-210.
7. Davidson, D. L., "The Micromechanics of Fatigue Crack Growth in Ti-6Al-4V Reinforced with SCS-6 Fibers," Metallurgical Transactions A, Vol. 23A, 1992, pp. 865-879.
8. Peterson, R. E., Stress Concentration Factors, Wiley, New York, 1974, pp. 150 and 196.
9. Bigalow, C. A., "A Micromechanics Based Strength Prediction Methodology for Notched Metal Matrix Composites," Composites, Vol. 24, 1993, pp. 113-121.
10. Johnson, W. S. and Bigelow, C. A., "Elastic Plastic Stress Concentrations Around Crack Like Notches in Continuous Fiber Reinforced Metal Matrix Composites," Test Methods and Design Allowables for Fibrous Composites, Second Volume, ASTM STP 1003, C. C. Chamis, Ed., American Society for Testing and Materials, Philadelphia, 1989, pp. 261-275.
11. Blatt, D., Karpur, P., Stubbs, D. A., and Matikas, T. E., "Observation of Interfacial Damage in the Fiber Bridged Zone of a Titanium Matrix Composite," Scripta Metallurgica and Materials, Vol. 29, 1993, pp. 851-856.
12. Ghosn, L. J., Kantzos, P., and Telesman, J., "Modeling of Crack Bridging using a Unidirectional Metal Matrix Composite," International Journal of Fracture, Vol. 54, 1992, pp. 345-357.
13. Ghosn, L. J., Telesman, J., and Kantzos, P., "Specimen Geometry Effects on Fiber Bridging in Composites," Fatigue '93, Vol. II, J.-P. Bailon and I. J. Dickson, Eds., Engineering Materials Advisory Services, Ltd., Cradley Heath, UK, 1993, pp. 1231-1238.
14. Marshall, D. B., Cox, B. N., and Evans, A. G., "The Mechanics of Matrix Cracking in Brittle Matrix Composites," Acta Metallurgica, Vol. 33, 1985, pp. 2013-2021.
15. Bakuckas, J. G. and Johnson, W. S., "Application of Fiber Bridging Models to Fatigue Crack Growth in Unidirectional Titanium Matrix Composites," Journal of Composite Technology and Research, in press.
16. Chan, K. S., "Effects of Interface Degradation on Fiber Bridging of Composite Fatigue Cracks," Acta Metallurgical Materials, Vol. 41, 1993, pp. 761-768.
17. Kantzos, P., Eldridge, J., Koss, D. A., and Ghosn, L. J., "The Effect of Fatigue Loading on the Interfacial Shear Properties of SCS-6/Ti Based MMCs," Proceedings, Materials Research Society, Vol. 273, 1992, pp. 135-142.
18. Jira, J. and Larsen, J. M., "Crack Bridging Behavior in Unidirectional SCS-6/Ti-24Al-11Nb Composite," Fatigue '93, Vol. II, J.-P. Bailon and I. J. Dickson, Eds., Engineering Materials Advisory Services, Ltd., Cradley Heath, UK, 1993, pp. 1085-1090.
19. John, R., Jira, J. R., Larsen, J. M., and Ashbaugh, N. E., "Analysis of Bridged Fatigue Cracks in Unidirectional SCS-6/Ti-24Al-11Nb," Fatigue '93, Vol. II, J.-P. Bailon and I. J. Dickson, Eds., Engineering Materials Advisory Services, Ltd., Cradley Heath, UK, 1993, pp. 1091-1096.
20. Walls, D. P., Bao, G., and Zok, F. W., "Mode I Fatigue Cracking in a Fiber Reinforced Metal Matrix Composite," Acta Metallurgica Materials, Vol. 41, 1993, pp. 2061-2071.
21. Davidson, D. L., "Fatigue Crack Growth Through Composites with Continuous Fiber Reinforcement," Proceedings, ICCM-9, Vol. I, A. Miravete, Ed., University of Zaragoza and Woodhead Publishing, Ltd., Spain, 1993, pp. 571-577.
22. Dollar, A. and Steif, P. S., "Load Transfer in Composites with a Coulomb Friction Interface," International Journal of Solids and Structures, Vol. 24, 1988, pp. 789-803.
23. Cox, B. N., Dadkhah, M. S., James, M. R., Marshall, D. B., Morris, W. L., and Shaw, M., "On Determining Temperature Dependent Interfacial Shear Properties and Bulk Residual Stresses in Fibrous Composites," Acta Metallurgica Materials, Vol. 38, 1990, pp. 2425-2433.