Modification of mechanical properties of Kevlar fibre by polymer infiltration

Journal of Materials Science

Volumn 31, Issue 5, 1996, Pages 1265-1274

  Mathur, A ^a   Netravali, A N ^a  

^a Department of Obstetrics Gynecology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESION; AMINES; AMMONIA; COMPRESSIVE STRENGTH; EPOXY RESINS; FAILURE (MECHANICAL); INFILTRATION; MECHANICAL PROPERTIES; POLYMERS; STRAIN; SULFURIC ACID; TENSILE STRENGTH;

BISMALEIMIDE POLYMERS; INTERFIBRILLAR ADHESION; KEVLAR FIBER; PLASMA MODIFICATION; POLYMER INFILTRATION;

SYNTHETIC FIBERS;

EID: 0030106066     PISSN: 00222461     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF00353106     Document Type: Article

References (40)

1. H. H. YANG (ed.), "Kevlar Aramid Fiber", (Wiley, Chichester, 1993).
2. S. J. DeTERESA, R. J. FARRIS and R. S. PORTER, J. Mater. Sci. 23 (1988) 1886.
3. J. H. GREENWOOD and P. G. ROSE, J. Mater. Sci. ibid. 9 (1974) 1809.
4. S. V. KULKARNI, J. S. RICE and B. W. ROSEN, Composites 6 (1975) 217.
5. L. SAWYER and M. JAFFE, in "High Performance Polymers", edited by E. Baer and A. Moet (Hanser, New York, 1991) p. 55.
6. L. KONAPASEK and J. W. S. HEARLE, J. Appl. Polym. Sci. 21 (1977) 2791.
7. M. PANAR, P. AVAKIAN, R. C. BLUME and K. H. J. GARDENER, Polym. Sci. Polym. Phys. Ed. 21 (1983) 1955.
8. M. G. DOBB, D. J. JOHNSON, A. MAJEED and B. P. SAVILLE, Polymer 20 (1979) 1284.
9. R. J. MORGAN, C. O. PRUNEDA and W. J. STEELE, Polym. Sci. Polym. Phys. Ed. 20 (1983) 1757.
10. Y. C. LEE and U. SANTOSH, Polym. Eng. Sci. 33 (1993) 907.
11. Y. C. LEE and U. SANTOSH, Idem, US Air Force Technical Report, WRDC-TR-90-4023 (1990).
12. H. E. DANIELS, Proc. R. Soc. Lond. 183 (1945) 405.
13. S. L. PHOENIX, in "Proceedings of 9th US National Congress of Applied Mechanics", Book H0028 edited by Y. H. Pao (ASME, New York, 1982) p. 219.
14. S. L. PHOENIX, P. SCHWARTZ and H. H. ROBINSON IV, Compos. Sci. Technol. 32 (1988) 81.
15. P. SCHWARTZ, M. ROSENSHAFT and H. D. WAGNER, J. Mater. Sci. Lett. 4 (1985) 1409.
16. C. S. WANG, J. BURKETT, S. BHATTACHARYA, H. H. CHUAH and F. E. ARNOLD, Proc. ACS Div. Polym. Mater. Sci. Eng. 60 (1989) 767.
17. H. H. CHUAH, T. T. TSAI, K. H. WEI, C. S. WANG and F. E. ARNOLD, Proc. ACS Div. Polym. Mater. Sci. Eng. ibid. 60 (1989) 517.
18. Y. WU and G. C. TESORO, J. Appl. Polym. Sci. 31 (1986) 1041.
19. W. SWEENY, J. Polym. Sci. Polym. Chem. Ed. 30 (1992) 1111.
20. F. J. McGARRY and J. E. MOALLI, Polymer 32(1991) 1816.
21. J. R. BROWN, P. J. C. CHAPPEL and Z. J. MATHYS, J. Mater. Sci 26 (1991) 4172.
22. R. BENRASHID and G. C. TESORO, Text. Res. J. 60 (1990) 334.
23. F. P. M. MERCX and P. J. LEMSTRA, Polym. Commun. 31 (1990) 252.
24. R. E. ALLRED, E. W. MERRIL and D. K. ROYLANCE, in "Molecular Characterization of Composite Interfaces", edited by H. Ishida and G. Kumar (Plenum Press, New York, 1984) p. 333.
25. Z-F. LI and A. N. NETRAVALI, J. Appl. Polym. Sci. 44 (1992) 319.
26. Z-F. LI and A. N. NETRAVALI, J. Appl. Polym. Sci. Idem, ibid. 44 (1992) 333.
27. V. RAVICHANDRAN, PhD Thesis, Cornell University (1991).
28. M. G. DOBB, in "Strong Fibers", Handbook of Composites, Vol. 1, edited by W. Watt and B. V. Perov (Elsevier Science North-Holland, 1985) p. 673.
29. R. FARRIS, Y. COHEN and S. J. DeTERESA, US Pat. 4842924 (1989).
30. J. V. CRIVELLO, J. Polym. Sci. Polym. Chem. Ed. 11 (1973) 1185.
31. A. MATHUR and A. N. NETRAVALI, Adv. Compos. Lett. 3 (1994) 13.
32. P. SCHWARTZ, H. D. WAGNER and S. L. PHOENIX, J. Compos. Mater. 18 (1984) 312.
33. A. N. NETRAVALI, P. SCHWARTZ, S. L. PHOENIX, Polym. Compos. 10 (1989) 385.
34. S. R. ALLEN, J. Mat. Sci. 22 (1988) 853.
35. Y. COHEN and E. L. THOMAS, Polym. Eng. Sci. 25 (1985) 1093.
36. R. J. MORGAN and N. L BUTLER, Polym. Bull. 27 (1992) 689.
37. R. J. MORGAN, C. O. PRUNEDA, N. L. BUTLER, F. M. KONG, L. CALEY and R. L. MOORE, in "Proceedings of the 29th National SAMPE Symposium" (1984) p. 891.
38. A. N. NETRAVALI and W. SACHSE, Polym. Compos. 12 (1991) 370.
39. K. KUPPER and P. SCHWARTZ, J. Adh. Sci. Tech. 5 (1991) 165.
40. U. GAUR and B. MILLER, Compos. Sci. Technol. 34 (1989) 35.