Effect of velocity on flow localization in tension

Acta Materialia

Volumn 44, Issue 3, 1996, Pages 1021-1033

  Hu, Xiaoyu ^a,b   Daehn, Glenn S ^a  

^a The Ohio State University   (United States)

^b American Crystal Technology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CHARACTERIZATION; COMPUTER SIMULATION; DEFORMATION; ESTIMATION; STRAIN RATE; TENSILE TESTING; VELOCITY;

EXPANDING RING TEST; FLOW LOCALIZATION; HOLLOMON-TYPE CONSTITUTIVE LAW; INERTIAL EFFECT; ONE DIMENSIONAL DYNAMIC NUMERICAL SIMULATION; POWER LAW STRAIN RATE SENSITIVITY; SHEET TENSILE TEST; TENSION; VELOCITY EFFECT;

DUCTILITY;

EID: 0030105304     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/1359-6454(95)00228-6     Document Type: Article

References (67)

1. D. S. Clark and D. S. Wood, Trans. ASM 42, 45 (1950).
2. W. W. Wood et al., Sheet Metal Forming Technology, Vol. I, Chance-Vought Corp., Dallas, TX, Aeronautical Systems Division Contract Report No. ASD-TDR-63-7-871 (1963).
3. W. W. Wood, Exp. Mech. 19, 441 (1967).
4. L. W. Meyer, H. D. Kunze and S. Seifert, in Shock Waves and High Strain Rate Phenomena in Metals (edited by M. A. Meyers and L. E. Murr), p. 51. Plenum Press, NY (1981).
5. J. M. Stuchen, J. Engng Mater. Technol. 95, 182 (1973).
6. U. S. Lindholm, R. L. Bessey and G. V. Smith, J. Mater. 6, 119 (1971).
7. G. Regazzoni and F. Montheillet, in Mechanical Properties of Materials at High Rate of Strain (edited by J. Harding), p. 63. The Institute of Physics, Conf. Ser. No. 70, London (1984).
8. S. Clyens and J. D. Campbell, in Mechanical Properties of Materials at High Rates of Strain (edited by J. Harding), p. 62. The Institute of Physics, Conf. Ser. No. 21, London (1974).
9. J. C. Gianotta, G. Regazzoni and F. Montheillet, J. Physique 46, C5-49 (1985).
10. N. Takeda and A. Kobayshi, in Shock Wave and High Strain Rate Phenomena in Materials (edited by M. A. Meyers, L. E. Murr and K. P. Staudhammer), p. 97. Marcel Dekker Inc. NY (1990).
11. T. von Karman and P. Duwez, J. appl. Phys. 21, 987 (1950).
12. I. M. Fyfe and A. M. Rajendran, J. Mech. Phys. Solids 20, 17 (1980).
13. A. M. Rajendran and I. M. Fyfe, J. appl. Mech. 49, 31 (1982).
14. D. E. Grady and D. A. Benson, Exp. Mech. 12, 393 (1983).
15. M. Altynova, X. Hu and G. S. Daehn, Metall. Trans. A, submitted for publication (1994).
16. H. J. Kleemola and A. J. Ranta-Eskola, Sheet Met. Ind. 48, 1046 (1979).
17. M. S. Hashmi, J. Strain. Anal. 15, 201 (1980).
18. R. H. Wagoner, Scripta metall. 15, 1135 (1981).
19. R. H. Wagoner and N. M. Wang, Metall. Trans. A 14A, 2395 (1983).
20. O. D. Sherby and C. M. Young, in Rate Processes in Plastic Deformation of Materials (edited by J. C. M. Li and A. K. Mukherjee), p. 497. ASM. Metals Park, OH (1972).
21. P. S. Follansbee and U. F. Kocks, Acta metall. 36, 81 (1988).
22. E. W. Hart, Acta metall. 15, 351 (1967).
23. J. Campbell, J. Mech. Phys. Solids 15, 359 (1967).
24. D. Lee and W. A. Backofen, Trans. TMS-AIME 239, 1034 (1967).
25. D. A. Woodford, Trans. ASM 62, 291 (1969).
26. E. Dunconbe, Int. J. Mech. Sci. 14, 325 (1972).
27. J. J. Jonas, R. A. Holt and C. E. Coleman, Acta metall. 24, 911 (1976).
28. A. K. Ghosh, Acta metall. 25, 1413 (1977).
29. J. W. Hutchinson and K. W. Neale, Acta metall. 25, 839 (1977).
30. J. J. Jonas and B. Baudelet, Acta metall. 25, 43 (1977).
31. F. A. Nichols, Acta metall. 28, 663 (1980).
32. I. H. Lin, J. P. Hirth and E. W. Hart, Acta metall. 29, 819 (1981).
33. S. L. Semiatin, A. K. Ghosh and J. J. Jonas, Metall. Trans. A 16A, 2291 (1985).
34. K. Chung and R. H. Wagoner, Metall. Trans. A 19A, 293 (1988).
35. A. S. Korhonen and H. J. Kleemola, Metall. Trans. A 9A, 979 (1978).
36. M. Wada and T. Nakamura, Phil. Mag. A 38, 167 (1978).
37. G. F. Ferron, Mater. Sci. Engng 49, 241 (1981).
38. A. K. Sachdev and J. E. Hunter, Metall. Trans. A 13A, 1063 (1982).
39. R. A. Ayres, Metall. Trans. A 16A, 37 (1985).
40. S. L. Semiatin, R. A. Ayres and J. J. Jonas, Metall. Trans. A 16A, 2299 (1985).
41. M. R. Lin and R. H. Wagoner, Metall. Trans. A 18A, 1035 (1987).
42. Y. Gao and R. H. Wagoner, Metall. Trans. A 18A, 1001 (1987).
43. K. S. Raghavan and R. H. Wagoner, Int. J. Plasticity 3, 33 (1987).
44. Y. H. Kim and R. H. Wagoner, Int. J. Mech. Sci. 29, 179 (1987).
45. J. W. Taylor, F. H. Harlow and A. A. Amselen, J. appl. Mech. 45, 105 (1978).
46. A. Needleman, in Topics in Plasticity (edited by W. H. Yang), p. 151. AM Press, Ann Arbor, MI (1991).
47. C. Fressengeas and A. Molinari, Acta metall. 33, 387 (1985).
48. G. Regazzoni, J. N. Johnson and P. S. Follansbee, J. appl. Mech. 53, 519 (1986).
49. X. Hu, R. H. Wagoner, G. S. Daehn and S. Ghosh, Metall. Trans. A 25A, 2723 (1994).
50. J. H. Hollomon, Trans. TMS-AIME 162, 268 (1945).
51. T. J. R. Hughes, The Finite Element Method - Linear Static and Dynamic Finite Element Analysis. Prentice-Hall Inc., NJ (1987).
52. D. R. J. Owen, Finite Element in Plasticity. Pineridge Press Limited, U.K. (1980).
53. W. Weaver, Jr and P. R. Johnston, Finite Elements for Structural Analysis. Prentic-Hall Inc., NJ (1984).
54. L. E. Malvern, J. appl. Mech. 18 203 (1951).
55. W. H. Gourdin, J. appl. Phys. 65 411 (1989).
56. M. P. Miles, J. S. Siles, R. H. Wagoner and K. Narashimhan, Metall. Trans. A 24A, 1143 (1993).
57. X. Hu, R. H. Wagoner, G. S. Daehn and S. Ghosh, Comm. Num. Meth. Engng 10, 993 (1994).
58. V. S. Balanethiram and G. S. Daehn, Scripta metall. mater. 30, 515 (1994).
59. Properties of Some Metals and Alloys, 3rd edition, p. 48. The International Nickel Company (1968).
60. Properties and Selection: Stainless Steel, Tool Materials and Purpose Materials, Metals Handbook, 9th edition, Vol. 3. ASM, Metal Parks, OH (1980).
61. P. Knoche and A. Needleman, Eur. J. Mech., A/Solids 12, 585 (1993).
62. Properties and Selection: Nonferrous Alloys and Pure Metals, Metals Handbook, 9th Edition, Vol. 2. ASM, Metals Park, OH (1979).
63. Forming and Forging, Metals Handbook, 9th Edition, Vol. 14. ASM, Metals Park, OH (1988).
64. K. S. Raghavan and R. H. Wagoner, Metall. Trans. 18A, 2143 (1987).
65. A. K. Ghosh and R. A. Ayres, Metall. Trans. 7A, 1589 (1976).
66. M. A. Burke and W. D. Nix, Acta metall. 23, 793 (1975).
67. M. C. Noland, Machine Design, Aug. 17, 164 (1967).