Swell and distortions of high-density polyethylene extruded through capillary dies

Polymer Engineering and Science

Volumn 36, Issue 3, 1996, Pages 410-424

  Eggen, Svein ^a   Hinrichsen, Einar L ^b  

^a Borealis AS   (Norway)

^b SINTEF   (Norway)

Author keywords

[No Author keywords available]

Indexed keywords

CALCULATIONS; CAPILLARY FLOW; CURVE FITTING; EXTRUSION DIES; EXTRUSION MOLDING; GEOMETRY; MATHEMATICAL MODELS; PLASTIC DEFORMATION; PRESSURE DROP; SHEAR DEFORMATION; SWELLING; VISCOSITY;

CAPILLARY DIES; ELONGATIONAL DEFORMATION; STICK SLIP INSTABILITY; STORAGE MODULUS;

HIGH DENSITY POLYETHYLENES;

EID: 0030082294     PISSN: 00323888     EISSN: None     Source Type: Journal    
DOI: 10.1002/pen.10428     Document Type: Article

References (58)

1. F. N. Cogswell, P. C. Webb, J. C. Week, S. G. Maskell, and P. D. R. Rice, Plast. Polym., 39, 340 (1971).
2. K. F. Wissburn and J. M. Dealy, "Melt Rheology and Blow Molding," Chap. 17, pp. 645-81 in Blow Molding Handbook, D. V. Rosato and D. V. Rosato, eds., Hanser Publishers (1989).
3. F. N. Cogswell, J. Non-Newt Fluid Mech., 4, 23 (1978).
4. A. G. Gibson, "Converging Dies," Chap. 3, pp. 49-92 in Rheological Measurement, A. A. Collyer and D. W. Clegg, eds. Elsevier App. Science Pub. (1988).
5. J. Guillet and M. Seriai, Rheol. Acta, 30, 540 (1991).
6. R. G. Larson, Rheol. Acta, 31, 213 (1992).
7. M. M. Denn, "Surface-Induced Effects in Polymer Melt Flow," pp. 45-49 in Theoretical and Applied Rheology, Proc. XIth Int. Congr. on Rheology, P. Moldenaers and R. Keunings, eds., Elsevier Science Publishers B.V. (1992).
8. J. Vlachopoulos, Proceed. 2nd World Congr. Chem. Eng., 6, 269 (1981).
9. D. V. Rosato, "Troubleshooting-Processing Problems and Solutions," Chap. 18. pp. 683-729 in Blow Molding Handbook, D. V. Rosato and D. V. Rosato, eds., Hanser Publishers (1989).
10. J. M. Lupton and J. W. Regester, Polym. Eng. Sci., 5, 235 (1965).
11. A. V. Ramamurthy, J. Rheol., 30, 337 (1986).
12. D. S. Kalika and M. M. Denn, J. Rheol., 31, 815 (1987).
13. S. G. Hatzikiriakos and J. M. Dealy, J. Rheol., 35, 497 (1991).
14. S. G. Hatzikiriakos and J. M. Dealy, J. Rheol., 36, 703 (1992).
15. S. G. Hatzikiriakos and J. M. Dealy, J. Rheol., 36, 845 (1992).
16. S. G. Hatzikiriakos, Intern. Polym. Process., 8, 135 (1993).
17. M. Mooney, J. Rheol., 2, 210 (1931).
18. H. C. Lau and W. R. Schowalter, J. Rheol., 30, 193 (1986).
19. D. A. Hill, T. Hasegawa, and M. M. Denn. J. Rheol., 34, 891 (1990).
20. F. N. Cogswell, Polymer Melt Rheology. A Guide for Industrial Practice, John Wiley & Sons, New York (1981).
21. J. M. Piau, N. El Kissi, and B. Tremblay, J. Non-Newt. Fluid Mech., 34, 145 (1990).
22. F. N. Cogswell, Plast. Polym., 38, 391 (1970).
23. R. I. Tanner, J. Polym. Sci.: Part A 2, 8, 2067 (1970).
24. R. J. Koopmans, Polym. Eng. Sci., 32, 1741 (1992).
25. R. J. Koopmans, Polym. Eng. Sci., 32, 1750 (1992).
26. R. J. Koopmans, Polym. Eng. Sci., 32, 1755 (1992).
27. R. I. Tanner, Engineering Rheology, Clarendon Press, Oxford, England (1988).
28. D. Porter, Polym. Eng. Sci., 33, 437 (1993).
29. A. Goublomme, B. Draily, and M. J. Crochet, J. NonNewt. Fluid Mech., 44, 171 (1992).
30. A. Goublomme and M. J. Crochet, J. Non-Newt. Fluid Mech., 47, 281 (1993).
31. M. B. Bush, Polym. Eng. Sci., 33, 950 (1993).
32. D. G. Kiriakidis and E. Mitsoulis, Adv. Polym. Technol. 12, 107 (1993).
33. L. E. Nielsen, Polymer Rheology, Marcel Dekker Inc. New York (1977).
34. J. Vlachopoulos, M. Horie, and S. Lidorikis, Trans. Soc Rheol., 16, 669 (1972).
35. C. D. Han. Rheology in Polymer Processing, Academic Press, New York (1976).
36. F. N. Cogswell, Polym. Eng. Sci., 12, 64 (1972).
37. F. N. Cogswell, Trans. Soc. Rheol. 16, 383 (1972).
38. D. M. Binding, J. Non-Newt Fluid Mech., 27, 173 (1988).
39. D. M. Binding and K. Walters. J. Non-Newt. Fluid Mech., 30, 233 (1988).
40. B. Tremblay, J. Non-Newt. Fluid Mech., 33, 137 (1989).
41. B. H. Bersted, Polym. Eng. Sci., 33, 1079 (1993).
42. B. Tremblay, Polym. Eng. Sci., 32, 65 (1992).
43. R. N. Shroff, L. V. Cancio, and M. Shida, Trans. Soc. Rheol., 21, 429 (1977).
44. M. Laun and H. Schuch, J. Rheol., 33, 119 (1989).
45. C. Kwag and J. Vlachopoulos, Polym. Eng. Sci., 31, 1015 (1991).
46. A. R. Davies, I. M. Farah, M. Rides, and K. Thomas. Makromol. Chem. Macromol. Symp., 68, 25 (1993).
47. W. P. Cox and E. H. Merz, J. Polym. Sci., 28, 619 (1958).
48. R. B. Bird, R. C. Armstrong, and O. Hassager, Dynamics of Polymeric Liquids, Vol. 1: Fluid Mechanics, John Wiley & Sons. New York (1987).
49. M. H. Wagner and A. Demarmels, J. Rheol., 34, 943 (1990).
50. M. H. Wagner, Rheol. Acta. 18, 33 (1979).
51. H. M. Laun, Rheol. Acta, 17, 1 (1978).
52. K. Walters, "Recent Developments in Rheometry," pp. 16-23 in Theoretical and Applied Rheology, Proc. XIth Int. Congr. on Rheology. P. Moldenaers and R. Keunings; eds., Elsevier Science Publishers B.V. (1992).
53. F. J. Lim of W.R. Schowalter, J. Rheol., 33, 1359 (1989).
54. N. Bergem, "Visualization Studies of Polymer Melt Flow Anomalies in Extrusion," pp. 50-54 in Proc. 7th Int. Congr. on Rheology, Swedish Society of Rheology. Gothenberg (1976).
55. P. Geladi and B. R. Kowalski, Analytica Chimica Acta. 185, 1 (1986).
56. O. M. Kvalheim, Chemometrics and Intelligent Laboratory Systems, 4, 11 (1988).
57. T. F. Ballenger, I. J. Chen, J. W. Crowder, G. E. Hagler. D. C. Bogue, and J. L. White, Trans. Soc. Rheol., 15, 195 (1971).
58. Göttfert, "Instruction manual, Rheograph 2001, type 013.5," High Pressure Capillary Rheometer, Göttfert Werkstoff-Prüfmaschine GmbH (1981).