Simultaneous optimization of flame spraying process parameters for high quality molybdenum coatings using Taguchi methods

Surface and Coatings Technology

Volumn 79, Issue 1-3, 1996, Pages 276-288

  Babu, M Vijaya ^a   Kumar, R Krishna ^a   Prabhakar, O ^a   Shankar, N Gowri ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY MADRAS   (India)

^b IP Rings   (India)

Author keywords

Coatings; Molybdenum; Spraying

Indexed keywords

CORROSION RESISTANCE; HEAT RESISTANCE; MATERIALS TESTING; METALLIC FILMS; METALLOGRAPHIC MICROSTRUCTURE; MOLYBDENUM; OPTIMIZATION; WEAR RESISTANCE;

ADHESIVE STRENGTH; COHESIVE STRENGTH; MOLYBDENUM COATINGS; TAGUCHI METHODS;

FLAME SPRAYING;

EID: 0030082021     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/0257-8972(95)02453-0     Document Type: Article

References (31)

1. ASM Committee on Metal Spraying, Metal spraying, Metals Handbook, Vol. 2, American Society for Metals, Metals Park, OH, 8th edn., 1964.
2. A.P. Shepard and H.S. Ingham, METCO Flame Spray Handbook, Metco, Westbury, NY, 1965.
3. D. Davies and J.A. Whittaker, Methods of testing the adhesion of metal coatings to metals, Metall. Rev., 12 (1967) 15-26.
4. B.N. Chapman, Thin-film adhesion, J. Vac. Sci. Technol., 11 (1) (1974) 106-113.
5. F.J. Hermanek, Determining the adhesive/cohesive strength of thin thermally sprayed deposits. Weld. J., 57 (1978) 31-35.
6. H.S. Ingham, Jr., Adhesion of flame sprayed coatings, Adhesion measurement of thin films, thick films, and bulk coatings, ASTM Spec. Tech. Publ., 640 (1978) 285-292.
7. D.S. Rickerby, A review of the methods for the measurement of coating-substrate adhesion, Surf. Coat. Technol., 36 (1988) 541-557.
8. S.D. Brown, B.A. Chapman and G.P. Wirtz, Fracture kinetics and the mechanical measurement of adherence, in D.L. Houck (ed.), Proc. Conf. on Thermal Spray Technology - New Ideas and Processes, 1989, pp. 147-157.
9. P.R. Chalker, S.J. Bull and D.S. Rickerby, A review of the methods for the evaluation of coating-substrate adhesion, Mater. Sci. Eng., A140 (1991) 583-592.
10. M.J. Filiaggi and R.M. Pilliar, Mechanical testing of plasma-sprayed ceramic coatings on metal substrates: interfacial fracture toughness and tensile bond strength, J. Mater. Sci., 26 (1991) 5383-5395.
11. R.L. Apps, The influence of surface preparation on the bond strength of flame-sprayed aluminium coatings on mild steel, J. Vac. Sci. Technol., 11 (4) (1974) 741-746.
12. N.M. Poley and H.L. Whitaker, Adhesion of chromium films to soda lime glass, J. Vac. Sci. Technol., 11 (1), (1974) 114-118.
13. K.K. Schweitzer, M.H. Ziehl and Ch. Schwaminger, Improved methods for testing bond and intrinsic strength and fatigue of thermally sprayed metallic and ceramic coatings, Surf. Coat. Technol., 48 (1991) 103-111.
14. H.D. Steffens, B. Wielage and J. Drozak, Interface phenomena and bonding mechanism of thermally-sprayed metal and ceramic composites, Surf. Coat. Technol., 45 (1991) 299-308.
15. ASTM, Standard test method for adhesion or cohesive strength of flame-sprayed coatings, ASTM C633 Annual Book of ASTM Standards, Section 2, Vol. 02.05, 1989, pp. 663-667.
16. C.E. Hunter, T.P. Gardner and C.E. Zakrajsek, Simultaneous optimisation of diesel engine parameters for low emissions using Taguchi methods, SAE Trans., Sect. 3, Part 2, 99 (1990) 2068-2078.
17. William and Andrew, New piston ring face coatings using design of experiments, SAE Trans., Sect. 3, Part 2, 99 (1990) 1228-1235.
18. M.S. Phadke, Quality Engineering Using Robust Design, Prentice Hall, Englewood Cliffs, NJ, 1989.
19. C.C. Berndt, Tensile adhesion test measurements on plasma-sprayed coatings, in S.R. Vallori et al. (eds.), Advances in Fracture Research (Fracture 84), Proc. 6th Int. Conf. on Fracture (ICF6), Vol. 4, 1984, pp. 2553-2559.
20. M. Vijaya Babu, M.S. Thesis, Mechanical Engineering Department, Indian Institute of Technology, Madras, 1994.
21. S. Kitahara and A. Hasui, A study of the bonding mechanism of sprayed coatings, J. Vac. Sci. Technol., 11(4) (1974) 747-753.
22. M. Vijaya Babu and R. Krishna Kumar, A theoretical analysis of the test specimens used for coating strength evaluation, Int. Rep., Mechanical Engineering Department, Indian Institute of Technology, Madras, 1994.
23. R.F. Pabst and G. Elssner, Adherence properties of metal-to-ceramic joints, J. Mater. Sci., 15 (1980) 188-196.
24. R. McPherson, The relationship between the mechanism of formation, microstructure and properties of plasma-sprayed coatings, Thin Solid Films, 83 (1981) 297-310.
25. R. McPherson and B.V. Shafer, Interlamellar contact within plasma-sprayed coatings, Thin Solid Films, 97 (1982) 201-204.
26. S.C. Gill and T.W. Clyne, Stress distributions and material response in thermal spraying of metallic and ceramic deposits, Metall. Trans. B, 21 (1990) 377-385.
27. 3, Thin Solid Films, 39 (1976) 251-262.
28. F.N. Longo, Metallurgy of flame sprayed nickel aluminide coatings, Weld. J., 45(2) (1966) 66s-69s.
29. I.A. Fisher, Variables influencing the characteristics of plasma-sprayed coatings, Int. Met. Rev., 17 (1972) 117-129.
30. R.C. Tucker, Jr. Structure property relationships in deposits produced by plasma spray and detonation gun techniques, J. Vac. Sci. Technol. 11, (4) (1974) 725-734.
31. R. McPherson, A review of microstructure and properties of plasma sprayed ceramic coatings, Surf. Coat. Technol., 39-40 (1989) 173-181.