Failure analysis of bolted composite joints exhibiting in-plane failure modes

Journal of Composite Materials

Volumn 30, Issue 3, 1996, Pages 358-383

  Hollmann, Kaj ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

Bolted joint; Composite; DZM; Failure; Fracture; In plane; Laminate; Model; Net tension; Shear; Shear out; Tensile

Indexed keywords

COMPOSITE MATERIALS; FAILURE (MECHANICAL); FAILURE ANALYSIS; FRACTURE; MATHEMATICAL MODELS; SHEAR STRENGTH; STRENGTH OF MATERIALS; TENSILE PROPERTIES;

BOLTED COMPOSITE JOINTS; DAMAGE ZONE MODEL; IN PLANE FAILURE MODES; NET TENSION; SHEAR OUT FAILURE;

BOLTED JOINTS;

EID: 0029777611     PISSN: 00219983     EISSN: None     Source Type: Journal    
DOI: 10.1177/002199839603000304     Document Type: Article

References (52)

1. Waszczak, J. P. and T. A. Cruse. 1971. "Failure Mode and Strength Predictions of Anisotropic Bolt Bearing Specimens," Journal of Composite Materials, 5:421-425.
2. Eisenmann, J. R. 1976. "Bolted Joint Static Strength Model for Composite Materials," NASA TM-X-3377, Part 2, April, pp. 563-602.
3. Hart-Smith, L. J. 1978. "Mechanically-Fastened Joints for Advanced Composites-Phenomenological Considerations and Simple Analysis," Proceedings, Conference on Fiber Composites in Structural Design, San Diego, pp. 543-574.
4. Oplinger, D. W. 1978. "On the Structural Behavior of Mechanically Fastened Joints in Composite Structure," Proceedings, Conference on Fiber Composites in Structural Design, San Diego, pp. 575-602.
5. Wilson, D. W., J. N. Gillespie, J. L. York and R. B. Pipes. 1980. "Failure Analysis of Composite Bolted Joints," University of Delaware, Report CCM-80-16.
6. Agarwal, B. L. 1980. "Static Strength Prediction of Bolted Joint in Composite Material," AIAA Journal, 19:1371-1375.
7. Wilson, D. W. and R. B. Pipes. 1981. "Analysis of the Shearout Failure Mode in Composite Bolted Joints," Proceedings ICCS/1, Composite Structures, I. H. Marshall, ed., pp. 34-49.
8. Soni, S. R. 1981. "Stress and Strength Analysis of Bolted Joints in Composite Laminates," Proceedings ICCS/1, Composite Structures, I. H. Marshall, ed., pp. 50-62.
9. Soni, S. R. 1981. "Failure Analysis of Composite Laminates with a Fastener Hole," ASTM STP 749, pp. 145-164.
10. York, J. L., D. W. Wilson and R. B. Pipes. 1982. "Analysis of the Net Tension Failure Mode in Composite Bolted Joints," Journal of Reinforced Plastics and Composites, 1:141-152.
11. Collings, T. A. 1982. "On the Bearing Strength of CFRP Laminates," Composites, 13:241-252.
12. Curtis, A. R. and P. Grant. 1984. "The Strength of Carbon Fibre Composite Plates with Loaded and Unloaded Holes," Composite Structures, 2:201-221.
13. Chang, F-K., R. A. Scott and G. S. Springer. 1984. "Failure of Composite Laminates Containing Pin Loaded Holes-Method of Solution," Journal of Composite Materials, 18:255-278.
14. Chang, F-K., R. A. Scott and G. S. Springer. 1984. "Failure Strength of Nonlinearly Elastic Composite Laminates Containing Pin Loaded Hole," Journal of Composite Materials, 18:464-477.
15. Tsiang, T-H. and J. F. Mandell. 1985. "Damage Development in Bolt Bearing of Composite Laminates," AIAA Journal, 23:1570-1577.
16. Tsujimoto, Y. and D. W. Wilson. 1986. "Elasto-Plastic Failure Analysis of Composite Bolted Joints," Journal of Composite Materials, 20:236-252.
17. Conti, P. 1986. "Influence of Geometric Parameters in the Stress Distribution Around a Pin-Loaded Hole in a Composite Laminate," Composite Science and Technology, 25:83-101.
18. Chang, F-K. 1986. "The Effect of Pin Load Distribution on the Strength of Pin Loaded Holes in Laminated Composites," Journal of Composite Materials, 20:401-408.
19. Crews, J. H., Jr. and V. A. Naik. 1986. "Failure Analysis of a Graphite/Epoxy Laminate Subjected to Bolt-Bearing Loads," ASTM STP 907, pp. 115-133.
20. Chang, F-K. and K-Y. Chang. 1987. "Post-Failure Analysis of Bolted Composite Joints in Tension or Shear-out Mode Failure," Journal of Composite Materials, 21:809-833.
21. Bäcklund, J. 1981. "Fracture Analysis of Notched Composites," Computers and Structures, 13:145-154.
22. Aronsson, C-G. and J. Bäcklund. 1982. "Damage Analysis of Fibrous Composites," Proceedings ICCM-IV, fourth International Conference on Composite Materials, Tokyo.
23. Aronsson, C-G. and J. Bäcklund. 1984. "Damage Mechanics Analysis of Matrix Effects in Notched Laminates," ASTM Symposium on Composite Materials: Fracture and Fatigue, Dallas/ Ft. Worth.
24. Aronsson, C-G. 1985. "Stacking Sequence Effects on Fracture of Notched Carbon Fibre/Epoxy Composites," Composite Science and Technology, 24:179-198.
25. Bäcklund, J. and C-G. Aronsson. 1986. "Tensile Fracture of Laminates with Holes," Journal of Composite Materials, 20:259-286.
26. Aronsson, C-G. and J. Bäcklund. 1986. "Tensile Fracture of Laminates with Cracks," Journal of Composite Materials, 20:287-307.
27. Aronsson, C-G. and K. Hollmann. 1986. "Strength Prediction of Carbon/Epoxy Composites with Small Holes and Small Cracks," Proceedings ISCMS, International Symposium on Composite Materials and Structures, Beijing, pp. 737-745.
28. Carlsson, L. A., C-G. Aronsson and J. Bäcklund. 1989. "Notch Sensitivity of Thermoset and Thermoplastic Laminates Loaded in Tension," Journal of Material Science, 24:1670-1682.
29. Collings, T. A. 1977. "The Strength of Bolted Joints in Multi-Directional CFRP Laminates," Composites, 8:43-55.
30. Godwin, E. W. and F. L. Matthews. 1980. "A Review of the Strength of Joints in Fibre-Reinforced Plastics, Part 1. Mechanically Fastened Joints," Composites, 11:155-160.
31. Kretsis, G. and F. L. Matthews. 1985. "The Strength of Bolted Joints in Glass Fibre/Epoxy Laminates," Composites, 16:92-102.
32. Matthews, F. L., C. M. Wong and S. Chryssafitis. 1982. "Stress Distribution Around a Single Bolt in Fibre-Reinforced Plastic," Composites, 13:316-322.
33. Hillerborg, A., M. Modéer and P. E. Petersson. 1975. "Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements," Cement and Concrete Research, 6:773-782.
34. Hollmann, K. 1991. "In-plane Shear Failure Analysis of Notched Composites," Composite Science and Technology, 41:257-285.
35. Hollmann, K. 1991. "Failure Analysis of a Shear Loaded Graphite/Epoxy Beam Containing an Irregular Cutout," Engineering Fracture Mechanics, 39:159-175.
36. Cook, R. D. 1974. Concepts and Applications of Finite Element Analysis, New York: Wiley.
37. Chamis, C. C. and G. T. Smith. 1978. "CODSTRAN: Composite Durability Structural Analysis," NASA TM-79070.
38. Sandhu, R. S., R. L. Gallo and G. P. Sendeckyj. 1982. "Initiation and Accumulation of Damage in Composite Laminates," ASTM STP 787, pp. 163-182.
39. Mahishi, J. M. 1986. "An Integrated Micromechanical and Macromechanical Approach to Fracture Behavior of Fiber-Reinforced Composites," Engineering Fracture Mechanics, 25:197-228.
40. Chang, F-K. and K-Y. Chang. 1987. "A Progressive Damage Model for Laminated Composites Containing Stress Concentrations," Journal of Composite Materials, 21:834-855.
41. 1983. BASIS Finite Element Structural Analysis System, The Aeronautical Research Institute of Sweden (FFA), Stockholm.
42. Rahman, M. J., R. E. Rowlands, R. D. Cook and T. L. Wilkinson. 1984. "An Iterative Procedure for Finite-Element Stress Analysis of Frictional Contact Problems," Computers & Structures, 18:947-954.
43. Eriksson, L. I. 1986. "Contact Stresses in Bolted Joints of Composite Laminates," Composite Structures, 6:57-75.
44. Hyer, M. W., E. C. Klang and D. E. Cooper. 1987. "The Effects of Pin Elasticity, Clearance and Friction on the Stresses in a Pin-Loaded Orthotropic Plate," Journal of Composite Materials, 21:190-206.
45. Rowlands, R. E., M. U. Rahman, T. L. Wilkinson and Y. I. Chiang. 1982. "Single- and Multiple-Bolted Joints in Orthotropic Materials," Composites, 13:273-279.
46. Zhang, K-D. and C. E. S. Ueng. 1984. "Stresses Around a Pin-Loaded Hole in Orthotropic Plates," Journal of Composite Materials, 18:432-446.
47. Hyer, M. W. and D. Lin. 1985. "Stresses in Pin-Loaded Orthotropic Plates: Photoelastic Results," Journal of Composite Materials, 19:138-153.
48. de Jong, T. 1977. "Stresses Around Pin-Loaded Holes in Elastically Orthotropic or Isotropic Plates," Journal of Composite Materials, 11:313-331.
49. Serabian, S. M. and D. W. Oplinger. 1987. "An Experimental and Finite Element Investigation Into the Mechanical Response of 0/90 Pin-Loaded Laminates," Journal of Composite Materials, 21:631-649.
50. Eriksson, I. and C-G. Aronsson. 1990. "Strength of Tensile Loaded Graphite/Epoxy Laminates Containing Cracks, Open and Filled Holes," Journal of Composite Materials, 24:457-482.
51. Garg, A. C. 1988. "Effect of Moisture and Temperature on Fracture Behavior of Graphite-Epoxy Laminates," Engineering Fracture Mechanics, 29:127-149.
52. Stockdale, J. H. and F. L. Matthews. 1976. "The Effect of Clamping Pressure on Bolt Bearing Loads in Glass Fibre Reinforced Plastics," Composites, 7:34-38.