Mode II stable crack growth

Fatigue and Fracture of Engineering Materials and Structures

Volumn 19, Issue 1, 1996, Pages 75-84

  Mourad, A H I ^a,b   Maiti, S K ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY BOMBAY   (India)

^b HELWAN UNIVERSITY   (Egypt)

Author keywords

Crack opening criterion; D16AT (2024 T3) aluminium alloy; Mode II crack growth; Plastic zones

Indexed keywords

2024-T3; COA CRITERION; CRACK EDGES; CRACK EXTENSION; CRACK FRONTS; CRACK OPENING; DEFORMATION THEORY; EXPERIMENTAL OBSERVATION; FRACTURE SURFACES; FRACTURED SURFACES; INCREMENTAL PLASTICITY; J-RESISTANCE CURVE; LOAD DISPLACEMENTS; MAXIMUM LOAD; MIXED MODE; MODE II; MODE II CRACK GROWTH; MODE II STABLE CRACK GROWTH; OUT-OF-PLANE; PLASTIC ZONES; SCANNING ELECTRON MICROGRAPHS; STABLE CRACK GROWTH; THEORETICAL RESULT; THEORETICAL STUDY;

CRACK PROPAGATION; FINITE ELEMENT METHOD; HYDROGEN EMBRITTLEMENT; SCANNING ELECTRON MICROSCOPY;

CRACKS;

EID: 0029773970     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1460-2695.1996.tb00933.x     Document Type: Article

References (46)

1. N. Iosipescu (1967) New accurate procedure for single shear testing of metals. J. Materials 2, 537-566.
2. D. B. Chisholm and D. L. Jones (1977) An analytical and experimental stress analysis of a practical mode II fracture test specimen. Expt. Mechs. 17, 7-13.
3. II specimen and mode II fracture toughness. Int. J. Fract. 17, R193-R197.
4. J. Watkins (1983) Fracture toughness test for soil-cement samples in mode II. Int. J. Fract. 23, 135-138.
5. H. A. Richard (1981) A new compact shear specimen. Int. J. Fract. 17, R105-R107.
6. H. A. Richard and K. Benitz (1983) A loading device for the creation of mixed mode in fracture mechanics. Int. J. Fract. 22, R55-R58.
7. H. A. Richard, D. Tenhaeff and H. G. Hahn (1986) Critical survey of mode II fracture specimens, in The Mechanism of Fracture, Proc. Int. Conf. and Exposition on Fatigue, Corrosion Cracking, Fracture Mechanics and Failure Analysis, 2-6 December 1985, Salt Lake City, Utah, USA, Editor V.S. Goel, American Society for Metals, 89-96.
8. H. A. Richard and M. Kuna (1990) Theoretical and experimental study of superimposed fracture modes I, II and III. Engng. Fract. Mechs. 35, 949-960.
9. S. V. Kamat and N. Eswara Prasad (1993) Comparison of fracture toughness of a 7XXX aluminum alloy under Mode I, Mode II and Mode III loading. Int. J. Fract. 63, R7-R13.
10. R. J. Buzzard, B. Gross and J. E. Srawley, (1984) Mode II fatigue crack growth specimen. Report NASA TM 83722, Lewis Research Center, Cleveland, OH.
11. R. J. Buzzard (1985) Experimental compliance calibration of the NASA Lewis Research Center Mode II fatigue specimen. Report NASA TM 86908, Lewis Research Center, Cleveland, OH.
12. M. Arcan, Z. Hashin and A. Voloshin (1978) A method to produce uniform plane-stress states with applications to fiber-reinforced materials. Experimental Mechs. 18, 141-146.
13. L. Banks-Sills, M. Arcan and Y. Bortman (1984) A mixed mode fracture specimen for mode II dominant deformation. Engng. Fract. Mechs. 20, 145-157.
14. L. Banks-Sills, M. Arcan (1986) A compact mode II fracture specimen. ASTM STP 905, American Society for Testing and Materials, Philadelphia (Pa), USA, 347-363.
15. K. Kokini, R. D. Managani, G. M. Dorogy and H. A. Ezzat (1987) Crack propagation under mode II loading: An effective stress intensity factor method. Engng. Fract. Mechs. 28, 93-100.
16. J. G. Cowie and F. R. Tuler (1991) Comparison of shear and tensile fracture in high strength aluminum alloys. Int. J. Fract. 47, 229-239.
17. D. Singh and D. K. Shetty (1989) Fracture toughness of polycrystalline ceramics in combined mode I and mode II loading. J. Ame. Ceram. Soc. 72 (1) 78-84.
18. S. Suresh, C. F. Shih, A. Morrone and N. P. O'Dowd (1990) Mixed mode fracture toughness of ceramic materials. J. Ame. Ceram. Soc. 73 (5) 1257-1267.
19. T. M. Maccagno and J. F. Knott (1989) The fracture behaviour of PMMA in mixed modes I and II. Engng. Fract. Mechs. 34, 65-86.
20. T. M. Maccagno and J. F. Knott (1991) The low temperature brittle fracture behaviour of steel in mixed modes I and II. Engng. Fract. Mechs. 38, 111-128.
21. T. M. Maccagno and J. F. Knott (1992) The mixed I/II fracture behaviour of lightly tempered HY130 steel at room temperature. Engng. Fract. Mechs. 41, 805-820.
22. L. Banks-Sills and D. Sherman (1990) Elasto-plastic analysis of a mode II fracture specimen. Int. J. Fract. 46, 105-122.
23. II fracture testing of a plastically deformed material. Int. J. Fract. 50, 15-26.
24. N. Hallback and F. Nilsson (1994) Mixed-mode I/II fracture behaviour of an aluminium alloy. J. Mech. Phys. Solids 42, 1345-1374.
25. S. Aoki, K. Kishimoto, T. Yoshida, M. Sakata and H. A. Richard (1990) Elastic-plastic fracture behaviour of an aluminium alloy under mixed mode loading. J. Mech. Phys. Solids 38, 195-213.
26. H. Andersson (1973) A finite element representation of stable crack growth. J. Mech. Phys. Solids 21, 337-356.
27. C. F. Shih, H. G. de Lorenzi and W. R. Andrews (1979) Studies on crack initiation and stable crack growth. Elastic-Plastic Fracture, ASTM STP 668, J. D. Landes, et al. (eds), American Society for Testing and Materials, Philadelphia (Pa), USA, 65-120.
28. C. F. Shih (1981) Relationships between the J-integral and the crack opening displacement for stationary and extending cracks. J. Mech. Phys. Solids 29, 305-326.
29. J. C. Newman, Jr. (1984) An elastic-plastic finite element analysis of crack initiation, stable crack growth and instability, in Fract Mech. Fifteenth Symposium, ASTM STP 833, American Society for Testing and Materials, Philadelphia (Pa), USA, 93-117.
30. A. Luxmoore, M. F. Light and W. T. Evans (1977) A comparison of energy release rates, the J-integral and crack-tip displacements. Int. J. Fract. 13, 257-259.
31. D. K. Mahanty and S. K. Maiti (1990) Experimental and finite element analysis on mode I and mixed mode (I and II) stable crack growth -I. Experimental. Engng. Fract. Mechs. 37, 1237-1250.
32. S. K. Maiti and D. K. Mahanty (1990) Experimental and finite element studies on mode I and mixed mode (I and II) stable crack growth -II. Finite Element Analysis. Engng. Fract. Mechs. 37, 1251-1275.
33. A.-H. I. Mourad and S. K. Maiti (1995) Mode I and mixed mode stable crack extensions through stiffened TPB specimens, Fatigue Fract. Engng. Mater. Struct. 18, 645-652.
34. S. K. Maiti and A.-H. I. Mourad (1995) Criterion for mixed mode stable crack growth, Part I: Three point bend geometry. Engng. Fract. Mechs. 52, 321-347.
35. S. K. Maiti and A.-H. I. Mourad (1995) Criterion for mixed mode stable crack growth, Part II: Compact tension geometry with and without stiffener, Engng. Fract. Mechs. 52, 349-378.
36. A.-H. I. Mourad, and S. K. Maiti, (In press 1995) Influence of state of stress on mixed mode stable crack growth through D16AT aluminium alloy. Int. J. Fract.
37. A. Bakker (1992) Three-dimensional constraint effects on stress intensity distributions in plate geometries with through-the-thickness cracks. Fatigue Fract. Engng Mater. Struct. 15 (11), 1051-1069.
38. G. Petzow (1978) Metallographic etching, American Society for Metals, Ohio.
39. F. Erdogan and G. C. Sih (1963) On the crack extension in plates under plane loading and transverse shear., Trans. ASME, J. Basic Engng. 519-525.
40. S. K. Maiti and R. A. Smith (1983) Theoretical and experimental studies on the extension of crack subjected to concentrated loading near their faces to compare the criteria for mixed mode brittle fracture. J. Mech. Phys. Solids 31, 389-403.
41. S. K. Maiti, V. Joshi and M. S. C. Bose (In press 1995) Crack closure integral based calculation of SIFs in three dimensions. Int. J. Fract. R81-R86.
42. K. N. Shivakumar, P. W. Tan and J. C. Newman Jr. (1988) A virtual crack closure technique for calculating stress intensity factors for cracked three-dimensional bodies. Int. J. Fract. 36, R43-R50.
43. K. J. Miller and A. P. Kfouri (1979) A comparison of elastic-plastic fracture parameters in biaxial stress states. Elastic-Plastic Fracture, ASTM STP 668, J.D. Landes, et al. (eds) American Society for Testing and Materials, Philadelphia (Pa), USA, 214-228.
44. Δ. in Advances in Research on Strength and Fracture of Materials. Editor D.M.R. Taplin, 3A, 241-245.
45. A. M. A. Mageed and R. K. Pandey (1991) Mixed mode crack growth under static and cyclic loading in Al-alloy sheets. Engng. Fracture Mech. 40, 317-385.
46. A.-H. I. Mourad (1995) Experimental and Finite Element Studies on Various Modes of Two Dimensional Stable Crack Growth. Ph.D Thesis, Mechanical Engineering Department, IIT, Powai, Bombay 400076, India.