Residual stress measurement in 304 stainless steel weld overlay pipes

Journal of Engineering Materials and Technology, Transactions of the ASME

Volumn 118, Issue 1, 1996, Pages 135-144

  Yen, Ju Hung ^a   Lin, Mark Ching Cheng ^a   Chen, Lih Jin ^a  

^a INDUSTRIAL TECHNOLOGY RESEARCH INSTITUTE   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

CALCULATIONS; COMPRESSIVE STRENGTH; MEASUREMENTS; PIPING SYSTEMS; REPAIR; RESIDUAL STRESSES; STRESS CONCENTRATION; STRESS CORROSION CRACKING; SURFACES; WELDS; YIELD STRESS;

CUTTING AND SECTIONING METHOD; INTERGRANULAR STRESS CORROSION CRACKING; PIPE INNER SURFACE; STAINLESS STEEL 304; WELDING OVERLAY REPAIR;

STAINLESS STEEL;

EID: 0029755911     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.2805927     Document Type: Article

References (34)

1. Bush, S. H., 1992, “Failure Mechanisms in Nuclear Power Plant Piping Systems,” ASME Journal of Pressure Vessel Technology, pp. 389-395.
2. N. R. C., 1988, Technical Report on Material Selection and Processing Guidelines for BWR Coolant Pressure Boundary Piping. NUREG-0313.
3. Cheng, C. R, Ellingson, W. A., Kupperman, D. S., Park, J. Y., Poeppel, R. B., Reimann, K. J., and Yamada, H., “Corrosion Studies of Nuclear Piping in BWR Environments,” Quarterly Report for Quarter Ending December 31 1975, Argonne National Laboratories, Argonne, 1L.
4. Park, J. Y., Kupperman, D. S., and Schack, W., 1984, “Examination of Overlay Pipe Weldments Removed from Hatch-2 Reactor,” Argonne National Laboratory, Argonne, IL.
5. Diercks, D. R., 1990, TM1-2 Vessel Investigation Project (VIP) Metallurgical Program. NUREG/CR-5524, Vol. 2, Argonne National Laboratory, Argonne, IL.
6. Nickola, W. E., 1984, “Post-Yield Effects on Center Hole Residual Stress Measurement,” Proceeding 5th International Conference on Experimental Mechanics, SESA.
7. Schajer, G. S., 1992, “Non-uniform Residual Stress Measurements by the Hole Drilling Method,” Strain, pp 19-22.
8. Hu, Chung-Nong, 1986, “Recent Developments Achieved in China about the Centre Hole Relaxation Technique for Residual Stress Measurement,” Strain, pp. 119.
9. Yen, H. J., and Lin, Mark C. C. 1993, “Measurement of Residual Stresses in the Weld Overlay of Piping Components,” Accepted for publication in Experimental Mechanics.
10. Nickola, W. E., 1986, “Practical Subsurface Residual Stress Evaluation by the Hole-Drilling Method,” Proceedings of the Spring Conference on Experimental Mechanics, Society for Experimental Mechanics, pp. 47-58.
11. Rybicki, E. F., McGuire, P. A., Merrick, E., and Wert, J., 1982, “The Effect of Pipe Thickness on Residual Stresses due to Girth Welds,” Trans. ASME, Vol. 104, pp. 204 -209.
12. Brown, D. K., and Owens, A., 1986, “Comparison of Technique for Residual Stress Determination in a Bead on Plate Titanium Sample,” Strain, pp. 71-76.
13. Shealy, W. S., Shadley, J. R., and Rybicki, E. F., 1984, “An Improved Back-Coinputation Procedure for the Parting-Out Step of a Destructive Method for Measuring Residual Stresses in Pipes,” Strain, pp. 117-122.
14. Shack, W. J., Ellingson, W. A., and Pahis, L. E., 1980, “Measurement of Residual Stresses in Type 304 Stainless Steel Piping Butt Weldment,” EPRI NP-1413, Argonne National Laboratory, Argonne, IL.
15. Rybicki, E. F., Shadley, J. R., and Rybicki, E. F., 1983, “A Consistent Splitting Model for Experimental Residual Stress Analysis,” Experimental Mechanics, pp. 438-446.
16. Park, A. P., 1981, The Mechanics of Fracture and Fatigue, E. and F. N. Spon Ltd., London.
17. Elber, E., 1970, “Crack Closure,” Engineering Fracture Mechanics, Vol. 2, pp. 37-45.
18. Ritchie, R. 0., 1984, “Near Threshold Fatigue: An Overview of the Role of Microstructure and Environment,” Proceedings of the 2nd Intenuitional Conference on Fatigue and Fatigue Thresholds, C. J. Beevers, eds. pp. 1833-1863.
19. Taylor, D., 1988, “Fatigue Threshold: Their Applicability to Engineering Situations,” International Journal of Fatigue, Vol. 10, pp. 67-79.
20. IHI, 1989, Weld Overlay Pipes. Ishikawajima Harima Heavy Industries Co. Ltd. Japan. Maintenance Engineering Dept. Nuclear Power Division.
21. Shadiey, J. R., Sorem, J. R., and Rybicki, E. F., 1989, ”A Fourier Series Back-Computation Method for the Parting-Out Step in Residual Stress Measurements in Pipes,” ASME Journal of Pressure Vessel Technology, Vol.3, pp. 225-233.
22. Ritchie, D. and Ieggatt, R. H., 1987, “The Measurement of the Distribution of Redidual Stress through the Thickness of a Welded Joint,” Strain, pp. 61-70.
23. Weng, C. C., Lin, Y. C., and Chou, C. P., 1993, “A Study on the Induced Drilling Stresses in the Centre Hole Method of Residual Stress Measurement,” Strain, pp. 45-51.
24. Lin, Mark C. C., and Yen, H. J., 1993, “Failure Analysis of Nine Stages Centrifugal Pump,” Journal of Machinery, Vol. 224, pp. 195-206 (in Chinese).
25. Gruber, G. J., 1986, “Monitoring of Intergranular Stress Corrosion Cracks in Pipes with Weld Overlays,” International Journal of Pressure Vessel and Piping, pp. 225-232.
26. Shack, W. J., 1982, “Measurement of Throughwall Residual Stresses in Large Diameter Type 304 Stainless Steel Piping Butt Weldments,” ANL-82-15. Argonnc National Laboratory, Argonne, IL.
27. Cheng, W. L., and Finnie, I., 1987, “A New Method for Measurement of Residual Axial Stresses Applied to a Multi-Pass Butt-Welded Cylinder,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 109, pp. 337-342.
28. Rybicki, E. F., Stonesifer, R. B., and Shack, W., 1986, “The Effect of Length of Weld Overlay Residual Stresses,” presented at the 1986 Joint PVP and Computer Engineering Division Conference, Chicago, IL, July 20-24.
29. Oddy, A. S., Goldak, J. A., and McDill, J. M., “Transformation Plasticity and Residual Stresses in Single-Pass Repair Welds,” pp. 13-18.
30. Sorem, J. R., Shadiey, J. R., and Rybicki, E. F., 1990, “Experimental Method for Determining Through Thickness Residual Hoop Stresses in Thin Walled Pipes and Tubes Without Inside Access,” Strain, pp. 7-14.
31. Zhao, Huaipu, 1992, “A New Method for Measurement of Three Dimensional Residual Stresses in a Multi-Pass Butt Welded Joint,” Strain, pp. 13-17.
32. Nelson, D. V., 1982, “Effects of Residual Stress on Fatigue Crack Propagation. Residual Stress Effects in Fatigue.” ASTM STP 776, pp. 172-194.
33. Todd, J. A., Liu, G., and Raman, V., 1988, “A New Mechanism of Crack Closure in Cathodically Protected ASTM A710 Steel,” Scripta Metallurgica, Vol. 22, pp. 745-750.
34. Hucek, H. J., 1983, Structural Alloys Handbook, Battelle Columbus Laboratories, Columbus, Ohio.