Prestraining and its influence on subsequent fatigue life

ASTM Special Technical Publication

Volumn 1292, Issue , 1996, Pages 328-341

  Kalluri, Sreeramesh ^a   Halford, Gary R ^a   McGaw, Michael A ^a,b  

^a NASA GLENN RESEARCH CENTER   (United States)

^b McGaw Technology Inc   (United States)

Author keywords

Cumulative fatigue damage; Life prediction; Mean stress; Metal fatigue; Nickel base superalloy; Prestraining

Indexed keywords

ELASTIC MODULI; ESTIMATION; FAILURE (MECHANICAL); FATIGUE OF MATERIALS; FATIGUE TESTING; SUPERALLOYS; TENSILE PROPERTIES; TENSILE TESTING; THERMAL EFFECTS;

LINEAR DAMAGE RULE; LINEAR STRAIN AND LIFE FRACTION RULE; NONLINEAR DAMAGE CURVE APPROACH; PRESTRAINING; SMITH WATSON TOPPER PARAMETER;

STRAIN;

EID: 0029753458     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp16145s     Document Type: Article

References (24)

1. Jones, A. H., "An Overview of Alloy 718 in Large Structural Castings," Superallov 718-Metallurgy and Applications, E. A. Loria, Ed., The Minerals, Metals and Materials Society, Warrendale, PA. 1989, pp. 307-318.
2. Krueger, D. D., "The Development of Direct Age 718 for Gas Turbine Engine Disk Applications," Superalloy 718 - Metallurgy and Applications, E. A. Loria, Ed., The Minerals, Metals and Materials Society, Warrendale, PA, 1989, pp. 279-296.
3. Jewett, R. P. and Halchak, J. A., "The Use of Alloy 718 in the Space Shuttle Main Engine," Superallovs 718, 625 and Various Derivatives, E. A. Loria, Ed., The Minerals, Metals and Materials Society, Warrendale, PA, 1991, pp. 749-760.
4. Korth, G. E., "Effects of Various Parameters on the Fatigue Life of 718," Superalloys 718, 625 and Various Derivatives, E. A. Loria, Ed., The Minerals, Metals and Materials Society, Warrendale, PA, 1991, pp. 457-476.
5. Kalluri, S., Bhanu Sankara Rao, K., Halford, G. R., and McGaw, M. A., "Deformation and Damage Mechanisms in Inconel 718 Superalloy," Superalloys 718, 625, 706 and Derivatives, E. A. Loria, Ed., The Minerals, Metals and Materials Society, Warrendale, PA, 1994, pp. 593-606.
6. Paulonis, D. F., Oblak, J. M., and Duvall, D. S., "Precipitation in Nickel-Base Alloy 718," Transactions of the ASM, Vol. 62, 1969, pp. 611-622.
7. 22 γ" Precipitates," Metallurgical Transactions, Vol. 5, 1974, pp. 143-153.
8. Chaturvedi, M. C. and Han, Y., "Strengthening Mechanisms in Inconel 718 Superalloy," Metal Science, Vol. 17, March 1983, pp. 145-149.
9. Oradei-Basile, A. and Radavich, J. F., "A Current T-T-T Diagram for Wrought Alloy 718," Superalloys 718, 625 and Various Derivatives, E. A. Loria, Ed., The Minerals, Metals and Materials Society, Warrendale, PA, 1991, pp. 325-335.
10. McGaw, M. A. and Bonacuse, P. J., "Automation Software for a Materials Testing Laboratory," Applications of Automation Technology to Fatigue and Fracture Testing, ASTM STP 1092, A. A. Braun, N. E. Ashbaugh, and F. M. Smith, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1990, pp. 211-231.
11. Kalluri, S., Halford, G. R., and McGaw, M. A., "Fatigue Behavior of Inconel 718 Superalloy Subjected to Tensile and Compressive Monotonic Strains," paper presented at the 1994 Conference on Advanced Earth-to-Orbit Propulsion Technology, NASA-Marshall Space Flight Center, Huntsville, Alabama, 17-19 May 1994.
12. Bhanu Sankara Rao, K., Kalluri, S., Halford, G. R., and McGaw, M. A., "Serrated Flow and Deformation Substructure at Room Temperature in Inconel 718 Superalloy During Strain Controlled Fatigue," Scripta Metallurgica et Materialia, Vol. 32, No. 4, 1995, pp. 493-498.
13. Basquin, O. H., "The Exponential Law of Endurance Tests," Proceedings, American Society for Testing and Materials, West Conshohocken, PA, Vol. 10, 1910, pp. 625-630.
14. Manson, S. S., "Behavior of Materials under Conditions of Thermal Stress," Proceedings, Heat Transfer Symposium, University of Michigan Engineering Research Institute, 1953, pp. 9-75 (also available as NACA Technical Note 2933, 1953).
15. Manson, S. S., "Behavior of Materials under Conditions of Thermal Stress," Proceedings, Heat Transfer Symposium, University of Michigan Engineering Research Institute, 1953, pp. 9-75 (also available as NACA Technical Note 2933, 1953).
16. Coffin, L. F., Jr., "A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal," Transactions, American Society of Mechanical Engineers, Vol. 76, 1954, pp. 931-950.
17. Palmgren, A., "Die Lebensdauer von Kugellagern," Verfahrenstechnik (Berlin), Vol. 68, 1924, pp. 339-341.
18. Langer, B. F., "Fatigue Failure from Stress Cycles of Varying Amplitude," Journal of Applied Mechanics, Vol. 59, 1937, pp. A160-A162.
19. Miner, M. A., "Cumulative Damage in Fatigue," Journal of Applied Mechanics, Vol. 67, 1945, pp. A159-A164.
20. Burgreen, D., "Review of Thermal Ratchetting," Fatigue at Elevated Temperatures, ASTM STP 520, American Society for Testing and Materials, West Conshohocken, PA, 1973, pp. 535-551.
21. Manson, S. S. and Halford, G. R., "Practical Implementation of the Double Linear Damage Rule and Damage Curve Approach for Treating Cumulative Fatigue Damage," International Journal of Fracture, Vol. 17, 1981, pp. 169-192.
22. Manson, S. S. and Halford, G. R., "Re-examination of Cumulative Fatigue Damage Analysis - An Engineering Perspective," Engineering Fracture Mechanics, Vol. 25, Nos. 5/6, 1986, pp. 539-571.
23. Smith, K. N., Watson, P., and Topper, T. H., "A Stress-Strain Function for the Fatigue of Metals," Journal of Materials, JMSLA, Vol. 5, No. 4, 1970, pp. 767-778.
24. Halford, G. R. and Nachtigall, A. J., "Strain Range Partitioning Behavior of an Advanced Gas Turbine Disk Alloy AF2-1DA," Journal of Aircraft, Vol. 17, No. 8, 1980, pp. 598-604.