Effect of oxygen and hydrogen on mechanical properties of commercial purity titanium

International Materials Reviews

Volumn 41, Issue 1, 1996, Pages 1-12

  Wasz, M L ^a   Brotzen, F R ^b   McLellan, R B ^b   Griffin, A J ^a  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

^b Rice University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADDITION REACTIONS; CORROSION RESISTANCE; DUCTILITY; HYDRIDES; HYDROGEN; MECHANICAL PROPERTIES; OXYGEN; STRAIN RATE; STRESSES; TITANIUM ALLOYS; TOUGHNESS; TRANSMISSION ELECTRON MICROSCOPY;

CREEP RESISTANCE; MULTIAXIAL STRESS; RESIDUAL INTERSTITIAL HYDROGEN;

TITANIUM;

EID: 0029726507     PISSN: 09506608     EISSN: None     Source Type: Journal    
DOI: 10.1179/imr.1996.41.1.1     Document Type: Review

References (98)

1. M. J. DONACHIE, Jr: 'Titanium: A technical guide'; 1988, Metals Park, OH, ASM.
2. R. W. SCHUTZ and D. E. THOMAS: in 'Metals handbook', 9th edn, Vol. 13, 669-706; 1986, Metals Park, OH, ASM.
3. R. I. JAFFEE and I. E. CAMPBELL: Trans. AIME, 1949, 185, 646-654.
4. ASM Committee on Titanium and Titanium Alloys: in 'Metals handbook', 9th edn, Vol. 3, 372-380; 1980, Metals Park, OH, ASM.
5. R. J. KOTFILA and H. M. BURTE: 'Hydrogen contamination in titanium and titanium alloys', WADC Technical Report 54-616, Wright-Patterson Air Force Base, OH, 1955.
6. H. D. KESSLER, R. G. SHERMAN, and J. F. SULLIVAN: J. Met., 1955, 7, 242-246.
7. E. FROMM: Z. Physik. Chem. NF, 1986, 147, 61-75.
8. G. A. LENNINO, J. W. SPRETNAK, and R. I. JAFFEE: Trans. AIME, 1956, 206, 1235-1240.
9. D. N. WILLIAMS and R. I. JAFFEE: J. Less-Common Met., 1960, 2, 42-48.
10. C. J. BEEVERS, M. R. WARREN, and D. V. EDMONDS: J. Less-Common Met., 1968, 14, 387-396.
11. C. D. KIM: in 'Metals handbook', 9th edn, Vol. 11, 245-251; 1986, Metals Park, OH, ASM.
12. D. N. WILLIAMS, B. G. KOEHL, and E. S. BARTLETT: J. Less-Common Met., 1969, 19, 385-398.
13. L. C. COVINGTON: Corrosion, 1979, 35, 378-382.
14. R. P. JEWETT, R. J. WALTER, W. T. CHANDLER, and R. P. FROMBERG: 'Hydrogen-environment embrittlement of metals - a NASA technology survey', Contract no. NAS8-19(C). Rocketdyne/North American Rockwell, Canoga Park, CA, 1971.
15. N. E. PATON and J. C. WILLIAMS: in 'Hydrogen in metals', (ed. I. M. Bernstein and A. W. Thompson), 409-431; 1974, Metals Park, OH, ASM.
16. M. L. WASZ, C. C. KO, F. R. BROTZEN, and R. B. McLELLAN: Scr. Metall., 1989, 23, 2039-2042.
17. M. L. WASZ, F. R. BROTZEN, and R. B. McLELLAN: Scr. Metall., 1993, 28, 483-487.
18. D. A. MEYN: Metall. Trans., 1974, 5, 2405-2414.
19. D. S. SHIH, I. M. ROBERTSON, and H. K. BIRNBAUM: Acta Metall., 1988, 36, 111-124.
20. P. C. TURNER and J. S. HANSEN: Adv. Mater. Process., 1993, 143, 42-43.
21. H. CONRAD: Acta Metall., 1966, 14, 1631-1632.
22. J. L. MURRAY and H. A. WRIEDT: Bull. Alloy Phase Diagrams, 1987, 8, 148-165.
23. G. OTTAVIANI, F. NAVA, G. QUIEROLO, G. IANNUZZI, G. DE SANTI, and K. N. TU: Thin Solid Films, 1987, 146, 201-207.
24. H. CONRAD: Prog. Mater. Sci., 1981, 26, 123-403.
25. A. SAN-MARTIN and F. D. MANCHESTER: Bull. Alloy Phase Diagrams, 1987, 8, 30-43.
26. C. M. CRAIGHEAD, G. A. LENNING, and R. I. JAFFEE: J. Met., 1952, 4, (12), 1317-1319.
27. A. JOSTSONS and A. E. JENKINS: Trans. AIME, 1967, 239, 1318-1323.
28. S. YAMANAKA, T. TANAKA, S. TSUBOI, and M. MIYAKE: Fusion Eng., 1989, 10, 303-308.
29. T. H. QUACH-KAMIMURA, D. DAVID, G. BERANGER, A. FALANGA, and G. LOZES: J. Less-Common Met., 1986, 125, 59-73.
30. B. G. POUND: Corrosion, 1991, 47, 99-104.
31. R. HEMPELMANN, D. RICHTER, and B. STRITZKER: J. Phys. F, Met. Phys., 1982, 12, 79-86.
32. R. KHODA-BAKHSH and D. K. ROSS: J. Phys. F, Met. Phys., 1982, 12, 15-24.
33. C. KORN and D. ZAMIR: J. Phys. Chem. Solids, 1970, 31, 489-502.
34. P. COTTERILL: Prog. Mater. Sci., 1961, 9, 241-259.
35. L. W. BERGER, D. N. WILLIAMS, and R. I. JAFFEE: Trans. AIME, 1958, 212, 509-513.
36. N. E. PATON and R. A. SPURLING: Metall. Trans., 1976, 7A, 1769-1774.
37. S. S. SIDHU, L. HEATON, and D. D. ZAUBERIS: Acta Crystallog., 1956, 9, 607-614.
38. G. G. LIBOWITZ: J. Nucl. Mater., 1960, 1, 1-22.
39. R. I. JAFFEE: Prog. Met. Phys., 1958, 7, 65-163.
40. C. D. BEACHEM: 'Hydrogen damage'; 1977, Metals Park, OH, ASM.
41. S. LAMPMAN: in 'Metals handbook', 10th edn, Vol. 2, 592-633; 1990, Metals Park, OH, ASM International.
42. W. R. KERR, P. R. SMITH, M. E. ROSENBLUM, F. J. GURNEY, Y. R. MAHAJAN, and L. R. BIDWELL: in 'Titanium '80: Science and technology', (ed. H. Kimura and O. Izumi), 2477-2486; 1980, Warrendale, PA, AIME.
43. D. H. KOHN and P. DUCHEYNE: J. Mater. Sci., 1991, 26, 534-544.
44. E. B. KULA and T. S. DESISTO: in 'Behavior of materials at cryogenic temperatures', (ed. F. R. Schwartzberg), STP 387, 3-31; 1966, Philadelphia, PA, ASTM.
45. H. CONRAD, B. DE MEESTER, M. DÖNER, and K. OKAZAKI: in 'The physics of solid solution strengthening', 1-45; 1975, Cleveland, OH, ASM.
46. T. L. ALTSHULER and J. W. CHRISTIAN: Acta Metall., 1966, 14, 903-908.
47. D. HULL: in 'Deformation twinning', (ed. R. E. Reed-Hill et al.), 121-155; 1963, New York, Gordon and Breach.
48. A. AKHTAR: Metall. Trans., 1975, 6A, 1105-1113.
49. Y. LII, V. RAMACHANDRAN, and R. E. REED-HILL: Metall. Trans., 1970, 1, 447-453.
50. Z. JIEPING, G. HAICHENG, Z. HUIJIN, Z. SHUFEN, and C. LAIRD: Mater. Sci. Eng., 1989, A114, 89-96.
51. D. SHECHTMAN and D. G. BRANDON: J. Mater. Sci., 1973, 8, 1233-1237.
52. H. CONRAD, K. OKASAKI, V. GADGIL, and M. JON: in 'Electron microscopy and structure of materials', 438-469; 1973, Berkeley, CA, University of California Press.
53. T. SAKAI and M. E. FINE: Acta Metall., 1974, 22, 1359-1372.
54. D. GUPTA and S. WEINIG: Trans. AIME, 1959, 215, 209-216.
55. J. C. WILLIAMS, A. W. SOMMER, and P. P. TUNG: Metall. Trans., 1972, 3, 2979-2984.
56. I. W. HALL: Metall. Trans., 1978, 9A, 815-820.
57. P. E. IRVING and C. J. BEEVERS: J. Mater. Sci., 1972, 7, 23-30.
58. R. J. H. WANHILL: Acta Metall., 1973, 21, 1253-1258.
59. R. L. ORR, O. D. SHERBY, and J. E. DORN: Trans. ASM, 1954, 46, 113-128.
60. H. CONRAD, M. K. KESHAVAN, and G. A. SARGENT: in Proc. 2nd Int. Conf. on 'Mechanical behavior of materials', 538-568; 1978, Cleveland, OH, ASM.
61. M. F. AMATEAU, H. I. BURRIER, Jr, and L. J. EBERT: Trans. ASM, 1966, 59, 920-929.
62. G. A. SARGENT, M. K. KESHAVAN, and H. CONRAD: in 'Titanium and titanium alloys', (ed. J. C. Williams and A. F. Belov), Vol. 1, 679-689; 1976, New York, Plenum Press.
63. M. L. WASZ, C. C. KO, F. R. BROTZEN, and R. B. McLELLAN: Scr. Metall., 1990, 24, 2043-2046.
64. C. F. CLARKE, D. HARDIE, and B. M. IKEDA: Corros. Sci., 1994, 36, 487-509.
65. R. J. BOURCIER and D. A. KOSS: Acta Metall., 1984, 32, 2091-2099.
66. C. W. LENTZ, D. A. KOSS, M. G. STOUT, and S. S. HECKER: Metall. Trans., 1983, 14A, 2527-2533.
67. R. I. JAFFEE, G. A. LENNING, and C. M. CRAIGHEAD: Trans. AIME, 1956, 206, 907-913.
68. C. J. BEEVERS and D. V. EDMONDS: Trans. AIME, 1969, 245, 2391-2398.
69. G. ELSSNER, V. KROHN, and O. RUANO: Z. Metallkd., 1976, 67, 311-317.
70. J. N. PRATT, W. J. BRATINA, and B. CHALMERS: Acta Metall., 1954, 2, 203-208.
71. J. R. DONOSO and R. E. REED-HILL: Metall. Trans., 1977, 8A, 945-948.
72. G. A. LENNING, C. M. CRAIGHEAD, and R. I. JAFFEE: Trans. AIME, 1954, 200, 367-376.
73. D. N. WILLIAMS: J. Inst. Met., 1962-63, 91, 147-152.
74. W. M. ALBRECHT and M. W. MALLET: Trans. AIME, 1958, 212, 204-210.
75. K. OKAZAKI and H. CONRAD: Trans. Jpn Inst. Met., 1973, 14, 364-367.
76. S. C. WILLIAMS: 'Report on titanium', 73-75; 1965, New York, Brundage, Story, and Rose.
77. A. S. TETELMAN and A. J. McEVILY, Jr: 'Fracture of structural materials'; 1967, New York, Wiley.
78. J. C. SCULLY and T. A. ADEPOJU: Corros. Sci., 1977, 17, 789-812.
79. E R. BROTZEN, E. L. HARMON, Jr, and A. R. TROIANO: Iron Age, 1954, 174, 52-55.
80. M. L. WASZ, C. C. KO, F. R. BROTZEN, and R. B. McLELLAN: Scr. Metall., 1990, 24, 2425-2429.
81. M. K. SHORSHOROV, V. N. MESCHERYAKOV, and V. A. MATYUSHKIN: in 'Titanium science and technology', (ed. R. I. Jaffee and H. M. Burte), Vol.4, 2679-2692; 1972, New York, Plenum Press.
82. W. R. KIESSEL and M. J. SINNOT: Trans. AIME, 1953, 197, 331-338.
83. K. OKAZAKI, K. MORINAKA, and H. CONRAD: Trans. Jpn Inst. Met., 1973, 14, 470-476.
84. P. KOFSTAD: J. Less-Common Met., 1967, 12, 449-464.
85. K. M. BROWNE: Acta Metall., 1972, 20, 507-514.
86. E. BRAUER, R. DÖRR, and H. ZÜCHNER: Z. Physik. Chem. NF, 1976, 100, 109-112.
87. W. J. PARDEE and N. E. PATON: Metall. Trans., 1980, 11A, 1391-1400.
88. N. E. PATON and A. W. THOMPSON: Metall. Trans., 1982, 13A, 1531-1532.
89. D. I. GOLLAND and C. J. BEEVERS: Met. Sci. J., 1971, 5, 174-177.
90. M. SUGANO and C. M. GILMORE: Metall. Trans., 1980, 11A, 559-563.
91. A. W. THOMPSON and J. D. FRANDSEN: Met. Sci. J., 1975, 9, 46-48.
92. N. G. TURNER and W. T. ROBERTS: Trans. AIME, 1968, 242, 1223-1230.
93. R. J. H. WANHILL: Eng. Fract. Mech., 1974, 6, 681-697.
94. N. E. FROST and K. DENTON: Metallurgia, Sept. 1964, 70, 113-120.
95. J. L. ROBINSON and C. J. BEEVERS: Met. Sci. J., 1973, 7, 153-159.
96. J. L. ROBINSON and C. J. BEEVERS: in 'Titanium science and technology', (ed. R. I. Jaffee and H. M. Burte), Vol. 2, 1245-1256; 1973, New York, Plenum Press.
97. T. L. WARDLAW and J. A. HALL: in 'Industrial applications of titanium and zirconium', (ed. E. W. Kleefisch), STP 728, 45-58; 1981, Philadelphia, PA, ASTM.
98. J. LIU and K. NAKASA: J. Jpn Inst. Met., 1991, 55, 1086-1092.