Microwave processing of materials

Annual Review of Materials Science

Volumn 26, Issue 1, 1996, Pages 299-331

  Clark, David E ^a   Sutton, Willard H ^b  

^a University of Florida   (United States)

^b UNITED TECHNOLOGIES RESEARCH CENTER   (United States)

Author keywords

Commercialization; Curing; Dielectric properties; Drying; Heating; Microwave equipment; Sintering; Synthesis

Indexed keywords

CURING; DIELECTRIC PROPERTIES; DRYING; INTERNATIONAL TRADE; MANUFACTURE; MICROWAVE DEVICES; SINTERING; SYNTHESIS (CHEMICAL);

COMMERCIALIZATION; MICROWAVE ENERGY; MICROWAVE PROCESSING;

MICROWAVE HEATING;

EID: 0029724031     PISSN: 00846600     EISSN: None     Source Type: Journal    
DOI: 10.1146/annurev.ms.26.080196.001503     Document Type: Article

References (141)

1. Sutton WH. 1989. Ann. Ceram. Soc. Bull. 68:376-86
2. Katz JD. 1992. Annu. Rev. Mater. Sci. 22:153-70
3. Sutton WH, Brooks MH, Chabinsky IJ, eds. 1988. Microwave Processing of Materials, Mater. Res. Soc. Symp. Proc. 124. Pittsburgh: Mater. Res. Soc. 399 pp.
4. Snyder WB Jr, Sutton WH, Iskander MF, Johnson DL, eds. 1990. Microwave Processing of Materials II, Mater. Res. Soc. Symp. Proc. 189. Pittsburgh: Mater. Res. Soc. 531 pp.
5. Clark DE, Gac FD, Sutton WH, eds. 1991. Microwaves: Theory and Application in Materials Processing, Ceram. Trans. 21. Westerville, OH: Am. Ceram. Soc. 698 pp.
6. Beatty RL, Sutton WH, Iskander MF, eds. 1992. Microwave Processing of Materials III, Mater. Res. Soc. Symp. Proc. 269. Pittsburgh: Mater. Res. Soc. 626 pp.
7. Clark DE, Tinga WR, Laia JR Jr, eds. 1993. Microwaves: Theory and Application in Materials Processing II, Ceram. Trans. 36. Westerville, OH: Am. Ceram. Soc. 596 pp.
8. Iskander MF, Lauf RJ, Sutton WH, eds. 1994. Microwave Processing of Materials IV, Mater. Res. Soc. Symp. Proc. 347. Pittsburgh: Mater. Res. Soc. 758 pp.
9. Clark DE, Folz DC, Oda SJ, Silberglitt R, eds. 1995. Microwaves: Theory and Application in Materials Processing III, Ceram. Trans. Westerville, OH: Am. Ceram. Soc. 592 pp.
10. Microwave Processing of Materials. 1994. Pub. NMAB-473. National Materials Advisory Board, Washington, DC: National Academy Press. 147 pp.
11. Osepchuk JM. 1984. Trans. IEEE on Microwave Theory and Technique, Vol. MTT-32(9). 26 pp.
12. Schiffmann RF. 1995. See Ref. 9, pp. 7-16
13. Poudrier JK. 1995. Today's Chemist at Work. 4:29-34
14. Metaxas AC, Meredith RJ. 1988. Industrial Microwave Heating, London: Peregrinus. 357 pp.
15. Tinga WR, Voss WAG. 1968. Microwave Power Engineering. New York: Academic
16. Levinson ML. 1971. U. S. Patent No. 3585258
17. Bennett CEG, McKinnon NA, Williams LS. 1968. Nature 217:1287-88
18. Sutton WH. 1988. See Ref. 3, pp. 287-95
19. 19a. Lewis DA. 1992. See Ref. 6, pp. 21-31
20. 19b. Lee WI, Springer GS. 1984. J. Composite Mater. 18:387-409
21. 20a. Paton BE, Salyarevich VE, Slusarezuk MG. 1993. MRS Bull. XVII (14): 58-63
22. 20b. Wei J, Hawley MC. 1995. Proc. Am. Chem. Soc. Div. Polym. Mater. Sci. Eng. 72:10-12
23. Janney MA, Kimrey H. 1988. Ceramic Powder Science II, Ceram. Trans. Westerville, OH: Am. Ceram. Soc. 1:919-24
24. Fathi Z, Folz DC, Clark DE. 1993. See Ref. 7, pp. 333-40
25. Blackman D. 1992. Proc. Am. Chem. Soc. 66:468-69
26. Wroe FCR. 1993. See Ref. 7, pp. 449-58
27. Holcomb CE, Dykes NL, Meek TT. 1989. U.S. Patent No. 4880578
28. Janney MA, Calhoun CD, Kimrey HD. 1992. J. Am. Ceram. Soc. 75: 341-46
29. De A, Ahmad I, Whitney ED, Clark DE. 1990. Ceram. Eng. Sci. Proc. 11(9-10):1743-53
30. 28a. Sutton WH, Johnson WE. 1980. U.S. Patent No. 4219361
31. 28b. Schwarz HF, Bosisio RG, Wertheimer MR, Couderc D. 1973. J. Microwave Power 8:303-22
32. Metaxas AC. 1993. See Ref. 7, pp. 549-62
33. 30a. Chen M, Siochi EJ, Ward TC, McGrath JE. 1993. Polym Eng. Sci. 33:1092-9
34. 30b. Hench LL, West JK. 1990. Principles of Electronic Ceramics. New York: Wiley & Sons. 546 pp.
35. Meng B, Booske JH, Cooper RF, Klein B. 1995. See Ref. 9, pp. 177-78
36. Janney MA, Kimrey HD, Kiggans JO. 1992. See Ref. 6, pp. 173-85
37. 33a. De A, Ahmad I, Whitney ED, Clark DE. 1991. See Ref. 5, pp. 319-28
38. 33b. Komarneni S, Li Q, Stefansson KM, Roy R. 1993. J. Mater Res. 8: 3176-83
39. Wei J, Hawley MC, Demeuse MT. 1995. Polym. Eng. Sci. 35:461-66
40. Freeman SA, Booske JH, Cooper RF. 1995. See Ref. 9, pp. 185-92; see also, Phys. Rev. Lett. 1995. 74: 2042-45
41. Freeman SA, Booske JH, Cooper RF. 1995. See Ref. 9, pp. 185-92; see also, Phys. Rev. Lett. 1995. 74: 2042-45
42. Wroe FCR, Rowley AT. 1995. See Ref. 9, pp. 69-78
43. 37a. Willert-Porada M. 1995. See Ref. 9, pp. 193-204
44. 37b. Rybakov KI, Semenov VE. 1994. Phys. Rev. B 49:64-68
45. 37c. Rybakov KI, Semenov VE. 1994. Prepr. No. 357. Nizhny Novgorod, Russia: Inst. Appl. Phys.
46. Arai M, Binner JGP, Bowden AL, Cross TE, Evans NG, et al. 1993. See Ref. 7, pp. 539-48
47. Hutcheon RM. 1995. See Ref. 9, pp. 235-42
48. Clark DE, Ahmad I, Dalton RC. 1991. Mater. Sci. Eng. A144:91-97
49. Currier RP, Devlin DJ. 1993. See Ref. 7, pp. 387-96
50. Thomas JJ, Jesse RR, Johnson DL, Jennings HM. 1992. See Ref. 6, pp. 277-83
51. Spotz MS, Skamser DJ, Johnson DL. 1995. J. Am. Ceram. Soc. 78:1041
52. Ceramic Industry. 1974. 102(5): 16-17
53. Pollart KA, Habeger CC Jr. 1996. Proc. 30th MW Power Symp. In press
54. Iskander MF. 1993. See Ref. 7, pp. 167-85
55. Thomas JR Jr. 1995. See Ref. 9, pp. 297-304
56. Huang Z, Iskander MF, Tucker J, Kimrey HD. 1994. See Ref 8, pp. 331-45
57. Booty MR, Kriegsmann GA. 1994. Methods Appl. Anal. 1:403-14
58. Jackson HW, Barmatz M, Wagner P. 1994. See Ref. 8, pp. 317-23
59. Kriegsmann GA. 1994. See Ref. 8, pp. 473-78
60. Tinga WR. 1993. See Ref. 7, pp. 29-44
61. Tian YL, Feng JH, Sun LC, Tu CJ. 1992. See Ref 6, pp. 41-46
62. Roussy G, Bennani A, Thiebaut J-M. 1987. J. Appl. Phys. 62:1167-70
63. Kriegsmann GA. 1992. See Ref. 6, pp. 257-64
64. Sutton WH, ed. 1993. Mater. Res. Soc. Bull. 18:58-62
65. Wicks GG, Clark DE, Schulz RL, Folz DC. 1995. See Ref. 9, pp. 79-90
66. Berkman B. 1991. Electron. Bus. 19: 50
67. Allenby BR. 1992. Mater. Res. Soc. Bull. 17(3):49
68. Schulz RL, Folz DC, Clark DE, Schmidt CJ, Wicks GG. 1995. See Ref. 9, pp. 107-16
69. Oda SJ, Balbaa IS. 1988. See Ref. 3, pp. 303-310
70. Oda SJ. 1993. See Ref. 7, pp. 73-79
71. Apte PS, MacDonald WD. 1995. See Ref. 9, pp. 55-62
72. Palaith D, Silberglitt R, Wu CCM, Kleiner R, Libelo EL. 1988. Mater. Res. Soc. Proc. 124:255-66
73. Silberglitt R, Ahmad I, Black WM, Katz JD. 1993. Mater. Res. Soc. Bull. 18(11):47-50
74. Binner JGP, Davis P, Cross TE. 1995. See Ref. 9, pp. 335-46
75. Binner JGP, Davis P, Cross TE. 1996. Microwave and High Frequency Heating Int. Conf., Cambridge, Sept. In press
76. Di Fiore RR, Clark DE. 1995. See Ref. 9, pp. 381-88
77. Al-Assafi S, Ahmad I, Fathi Z, Clark DE. 1991. See Ref 5, pp. 515-21
78. Davis P, Binner JGP, Cross TE, Fernie JA. 1994. See Ref. 8, pp. 655-60
79. Fukushima H, Yamanakin T, Matsui M. 1988. See Ref. 3, pp. 267-72
80. Tinga WR, Xu JD, Vermeulen FE. 1995. See Ref. 9, pp. 347-56
81. Ahmad I, Silberglitt R, Black WM, Sa'adaldin HS, Tian YL, et al. 1993. See Ref. 7, pp. 409-15
82. 74a. Hassine NA, Binner JGP, Cross TE. 1996. Int. J. Refract. Met. Hard Mater. In press
83. 74b. Gedye R, Westaway K, Smith F. 1995. Proc. Am. Chem. Soc. Div. Polym. Mater. Sci. Eng. 72:8-9
84. 74c. Yalpani M. 1995. Proc. Am. Chem. Soc. Div. Polym. Mater. Sci. Eng. 72: 46-47
85. Hottong U, Wei J, Dhulipala R, Hawley MC 1991. Ceram. Trans. 21:587. Westerville, OH: Am. Ceram. Soc.
86. Mashida T, Matsushita S, Ikegami I. 1975. Jpn. Patent No. 50138067
87. Lewis D. 1993. 39th Int. SAMPE Symp. Exhib. 39:1-12
88. Gourdenne A, Maassarani A-H, Monchaux P, Aussudre S. 1979. Polym. Prep. Am. Chem. Soc. Div. Polym. Chem. 20(2):471
89. Lewis D, Hedrick JC, Ward TC, McGrath JE. 1987. Polym. Prep. Am. Chem. Soc. Div. Polym. Chem. 28(2): 330
90. Jow J, DeLong J, Hawley MC. 1989. SAMPE Q. 20[2]:46
91. Thuillier FM, Jullien H. 1989. Makromol. Chem. Makromol. Symp. 25: 63
92. Methven JM, Ghaffariyan SR. 1992. Polym. Mater. Sci. Eng. Prepr. 66: 589
93. Agrawal RK, Lawrence TD. 1989. J. Adhesion 29:63-79
94. Rudder RA, Hendry RC, Hudson GC, Markunas RJ, Johnson AC, et al. 1993. See Ref 7, pp. 377-84
95. Wetheimer MR, Moisan M. 1994. Pure Appl. Chem. 66:1343-52
96. Tahara H, Minami K, Yasui T, Onoe K, Tsubakishita Y, et al. 1993. Jpn. J. App. Phys. 32:1822-28
97. Kim JS, Johnson DL. 1983. Am. Ceram. Soc. Bull. 62:620-22
98. Sweeney MP, Johnson DL. 1991. See Ref. 5, pp. 365-72
99. Vollath D, Sickafus KE. 1993. J. Mater. Res. 8:2978-84
100. Tiegs TN, Ploetz KL, Kiggans JO, Yeckley RL. 1993. See Ref. 7, pp. 259-67
101. LaCourse W, Akhtar M. 1989. U.S. Patent No. 4872896
102. Warner KGK, Varma HK, Mani TV, Damodaran D. 1992. J. Am. Ceram. Soc. 75:1990-92
103. Binner JGP, Cross TE. 1992. See Ref. 6, pp. 357-62
104. Clark DE, Ahmad I, Chandler G. 1991. U.S. Patent No. 5077268
105. Park SS, Meek TT. 1990. Ceram. Eng. Sci. Proc. 11:1395-404
106. Willert-Porada M, Gerdes T. 1994. See Ref. 8, pp. 563-69
107. McKittrick J, Tunaboylu B, Katz J. 1994. J. Mater. Sci. 29:2119-25
108. Samuels J, Brandon JR. 1992. J. Mater. Sci. 27:3259-65
109. Janney MA, Jackson ML, Kimrey HD. 1993. See Ref. 7, pp. 101-8
110. Blake RD, Katz JD. 1993. See Ref. 7, pp. 459-68
111. Ramesh PD, Vadhyanathan B, Gangula M, Rao KJ. 1994. J. Mater. Res. 9:3025-27
112. Zhong JP, Fathi Z, LaTorre GP, Folz DC, Clark DE. 1993. See Ref. 7, pp. 157-64
113. Di Fiore RR, Clark DE. 1996. Ceram. Eng. Sci. Proc. In press
114. Roy R, Komareni S, Yang LJ. 1985. J. Am. Ceram. Soc. 68:392-95
115. Moore EH, Clark DE, Hutcheon RM. 1993. See Ref. 7, pp. 325-32
116. Yu XD, Selmi F, Varadan VV, Varadan VK. 1992. Mater. Lett. 14: 245-50
117. Giguere R. 1992. See Ref. 6, pp. 387-96
118. Gutierrez E, Loupy A, Bram G, Ruiz-Hitzky E. 1989. Tetrahedron Lett. 30(8):945-48
119. Bram G, Loup A, Majdoub M, Petit A. 1991. Chem. Ind. 3:396-97
120. Cozzi AD, Fathi Z, Clark DE. 1993. See Ref. 7, pp. 317-24
121. Vaidyanathan B, Ganguli M, Rao KJ, 1994. J. Solid State Chem. 113: 448-50
122. See Ref. 10, pp. 112-44
123. Coal desulphurisation uses microwaves and magnets. 1991. Process Eng. 27 pp.
124. Xu Y, Xiaoyue X. 1995. J. Mater. Res. 10:334-38
125. Krage MK. 1981. Am. Ceram. Soc. Bull. 60:1232-34
126. Kao YH, MacKenzie JD. 1991. See Ref. 5, pp. 241-348
127. Varma HK, Amanthakumar PP, Rao PP, Warner KGK, Damodaran AD. 1993. See Ref 7, pp. 115-22
128. Blake RD, Meek T. 1986. U.S. Patent No. 4606748
129. Komareni S, Li Q, Stegansson KM, Roy R. 1993. J. Mater. Res. 8: 3176-83
130. Hawley MC, Wei J, Adegbite V. 1994. See Ref. 8, pp. 669-80
131. Fathi Z, Garard RJ, Clemons J, Saltiel C, Hutcheon RM, DeMeuse MT. 1995. See Ref. 9, pp. 441-56
132. Kennedy MJ. 1995. See Ref. 9.
133. Eves E. 1995. See Ref. 9, pp. 33-42
134. Garard RS. 1995. See Ref. 9, pp. 29-32
135. Krieger B. 1994. See Ref. 8, pp. 57-69
136. Churchland MT. 1995. See Ref. 9, pp. 63-68
137. Quin R. 1993. Eng. News Rec. 230: 25
138. Gat R, Swider S, Kelly E. 1995. Cutting Tool Eng. 47(2):64-72
139. Astex Tech. Overview Brochure. 4pp.
140. Worner HK, Standish N. 1989. Analyst 114:115-16
141. Smith FJ. 1988. Res. Dev. January. pp. 54-58