Influence of fiber architecture on the inelastic response of metal matrix composites

International Journal of Plasticity

Volumn 12, Issue 4, 1996, Pages 507-545

  Arnold, Steven M ^a   Pindera, Marek Jerzy ^b   Wilt, Thomas E ^c  

^a NASA GLENN RESEARCH CENTER   (United States)

^b UNIVERSITY OF VIRGINIA   (United States)

^c UNIVERSITY OF AKRON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE MICROMECHANICS; FIBER REINFORCED METALS; MATHEMATICAL MODELS; STRENGTH OF MATERIALS; STRESS ANALYSIS;

FIBER ARCHITECTURE; GENERALIZED METHOD OF CELLS;

METALLIC MATRIX COMPOSITES;

EID: 0029723729     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(96)00018-6     Document Type: Article

References (74)

1. 1963 Hashin, Z. and Shtrikman, S., "A Variational Approach to the Theory of the Elastic Behavior of Multiphase Media," J. Mech. Phys. Solids, 11, 127-140.
2. 1964 Hashin, Z. and Rosen, B. W., "The Elastic Moduli of Fiber-Reinforced Materials," J. Appl. Mech., 31, 223-232.
3. 1965 Drucker, D. C., "Engineering and Continuum Aspects of High-Strength Materials," in V. F. Zackay (ed.), High-Strength Materials, John Wiley and Sons, Chichester, pp. 795-833.
4. 1965 Hashin, Z., "On Elastic Behavior of Fibre Reinforced Materials of Arbitrary Transverse Phase Geometry," J. Mech. Phys. Solids, 13, 119-134.
5. 1966a Foye, R. L., "An Evaluation of Various Engineering Estimates of the Transverse Properties of Unidirectional Composites," SAMPE, 10, G31-G42.
6. 1966b Foye, R. L., "Structural Composites," Quarterly Progress Reports No. 1 and 2, AFML Contract No. AF33(615)-5150.
7. 1967a Adams, D. F. and Doner, D. R., "Longitudinal Shear Loading of a Unidirectional Composite," J. Comp. Mater., 1, 4-17.
8. 1967b Adams, D. F. and Doner, D. R., "Transverse Normal Loading of a Unidirectional Composite," J. Comp. Mater., 1, 152-164.
9. 1967 Halpin, J. C. and Tsai, S. W., "Environmental Factors in Composite Materials Design," AFML TR 67-423.
10. 1967 Hermans, J. J., "The Elastic Properties of Fiber Reinforced Materials when the Fibers are Aligned", Proc. Konigl. Nederl. Akad. van Weteschappen Amsterdam, B70(1), p. 1.
11. 1968 Chamis, C. C. and Sendeckyj, G. P., "Critique on Theories Predicting Thermoelastic Properties of Fibrous Composites," J. Comp. Mater., 2(3), 332-358.
12. 1968 Leissa, A. W. and Clausen, W. E., "Application of Point Matching to Problems in Micromechanics," in R. T. Schwartz and H. S. Schwartz (eds), Fundamental Aspects of Fiber Reinforced Plastic Composites. Interscience Publishers, New York, pp. 29-44.
13. 1968 Pickett, G., "Elastic Moduli of Fiber Reinforced Plastic Composites," in R. T. Schwartz and H. S. Schwartz (eds), Fundamental Aspects of Fiber Reinforced Plastic Composites. Interscience Publishers, New York, pp. 13-27.
14. 1969 Adams, D. F. and Tsai, S. W., "The Influence of Random Filament Packing on the Transverse Stiffness of Unidirectional Composites," J. Comp. Mater., 3, 368-381.
15. 1969 Ashton, J. E., Halpin, J. C. and Petit, P. H., Primer on Composite Materials: Analysis, Technomic Publishing Co., Stamford, Conn., pp. 77-81.
16. 1970 Adams, D. F., "Inelastic Analysis of a Unidirectional Composite Subjected to Transverse Normal Loading," J. Comp. Mater., 4, 310-328.
17. 1971 Hulbert, L. E. and Rybicki, E. F., "Boundary Point Least Squares Analysis of the Free Edge Effects in Some Unidirectional Fiber Composites," J. Comp. Mater., 5, 164-175.
18. 1972 Hashin, Z., "Theory of Fiber Reinforced Materials," NASA CR-1974, NASA-Langley Research Center, Hampton, VA.
19. 1972a Lin, T. H., Salinas, D. and Ito, Y. M., "Initial Yield Surface of a Unidirectionally Reinforced Composite," J. Appl. Mech., 39, 321-326.
20. 1972b Lin, T. H., Salinas, D. and Ito, Y. M., "Elastic-Plastic Analysis of Unidirectional Composites," J. Comp. Mater., 6, 48-60.
21. 1973 Dvorak, G. J., Rao, M. S. M. and Tarn, J. Q., "Yielding in Unidirectional Composites Under External Loads and Temperature Changes," J. Comp. Mater., 7, 194-216.
22. 1973 Foye, R. L., "Theoretical Post-Yielding Behavior of Composite Laminates. Part I - Inelastic Micromechanics," J. Comp. Mater., 7, 178-193.
23. 1974 Crossman, F. W., Karlak, R. F. and Barnett, D. M., "Creep of B/A1 Composites as Influenced by Residual Stress, Bond Strength, and Fiber Packing Geometry," in Failure Modes in Composites II. pp. 8-31. TMS of AIME Publication, New York.
24. 1974 Dvorak, G. J., Rao, M. S. M. and Tarn, J. Q., "Generalized Initial Yield Surfaces for Unidirectional Composites," J. Appl. Mech., 41, 249-253.
25. 1974 Karlak, R. F., Crossman, F. W. and Grant, J. J., "Interface Failures in Composites," in Failure Modes in Composites II, pp. 119-130. TMS of AIME Publication, New York.
26. 1976 Crossman, F. W. and Karlak, R. F., "Multiaxial Creep of Metal Matrix Fiber Reinforced Composites," in Failure Modes in Composites III, pp. 260-287, T. T. Chiao and D. M. Schuster (eds). TMS of AIME Publication (Proc. 105th AIME Annual Meeting).
27. 1976 Karlak, R. F. and Crossman, F. W., "Theoretical Off-Axis Response of Idealized Composites," in Failure Modes in Composites III, pp. 288-301, T. T. Chiao and D. M. Schuster (eds). TMS of AIME Publication (Proc. 105th AIME Annual Meeting).
28. 1982 Nemat-Nasser, S. and Iwakuma, T., "On Composites with Periodic Structures," Mech. Mater., 1, 239-267.
29. 1988 Aboudi, J., "Constitutive Equations for Elastoplastic Composites With Imperfect Bonding", Int. J. Plast., 4, 103-125.
30. 1989 Aboudi, J., "Micromechanical Analysis of Composites by the Method of Cells," Appl. Mech. Rev., 42, 193-221.
31. 1989a Ochiai, S. and Osamura, K., "Stress Disturbance Due to Broken Fibres in MMCs with Non-Uniform Fibre Spacing," J. Mater. Sci., 24, 3865-3872.
32. 1989b Ochiai, S. and Osamura, K., "Tensile Strength of Fibre-Reinforced MMCs with Non-Uniform Fibre Spacing," J. Mater. Sci., 24, 3536-3540.
33. Walker, K. P., Jordan, E. H. and Freed, A. D., "Nonlinear Mesomechanics of Composites with Periodic Microstructure: First Report," NASA TM 102051, NASA-Lewis Research Center, Cleveland, OH.
34. 1990 Brockenbrough, J. R. and Suresh, S., "Plastic Deformation of Continuous Fiber-Reinforced Metal-Matrix Composites: Effects of Fiber Shape and Distribution," Scripta Metall. Mater., 24, 325-330.
35. 1990 Johnson, W. S., Lubowinski, S. J., and Highsmith, A. L., "Mechanical Characterization of Unnotched SCS6/Ti-15-3 MMCs at Room Temperature," in J. M. Kennedy, H. H. Moeller and W. S. Johnson (eds), ASTM STP 1080. American Society for Testing and Materials, Philadelphia, PA, pp. 193-218.
36. 1990 MacKay, R. A., "Effect of Fiber Spacing on Interfacial Damage in a Metal Matrix Composite," Scripta Metall. Mater., 24, 167-172.
37. 1990 Wisnom, M. R., "Factors Affecting the Transverse Tensile Strength of Unidirectional Continuous Silicon Carbide Fibre Reinforced 6061 Aluminum," J. Comp. Mater., 24, 707-726.
38. 1991 Aboudi, J., Mechanics of Composite Materials: A Unified Micromechanical Approach. Elsevier, The Netherlands.
39. 1991 Brockenbrough, J. R., Suresh, S. and Wienecke, H. A., "Deformation of Metal-Matrix Composites with Continuous Fibers: Geometrical Effects of Fiber Distribution and Shape," Acta Metall. Mater., 39(5), 735-752.
40. 1991 Karbhari, V. M. and Wilkins, D. J., "Constituent Scale and Property Effects on Fibre-Matrix Debonding and Pull-Out," J. Mater. Sci., 26, 5888-5898.
41. 1991 Kolle, J. J. and Mueller, A. C., "Automated Modeling of Composite Physical Properties (U)," Quest Integrated Technical Report No. 533, Quest Integrated, Inc., Kent, Washington 98032.
42. 1991 Lu, T. C., Yang, J., Suo, Z., Evans, A. G., Hecht, R. and Mehrabian, R., "Matrix Cracking in Intermetallic Composites Caused by Thermal Expansion Mismatch," Acta Metall. Mater., Vol. 39(8), 1883-1890.
43. 1991a Nimmer, R. P., Bankert, R. J., Russell, E. S., Smith, G. A. and Wright P. K., "Micromechanical Modeling of Fiber/Matrix Interface Effects in Transversely Loaded SiC/Ti-6-4 MMCs," J. Comp. Technol., Research, JCTRER, 13(1), 3-13.
44. 1991b Nimmer, R. P., Siemers, P. A. and Eggleston, M. R., "Fiber Array Geometry Effects Upon Composite Transverse Tensile Behavior," in P. R. Smith, S. J. Balsone and T. Nicholas, (eds). Titanium Aluminide Composites, WL-TR-91-4020, pp. 596-619.
45. 1991 Walker, K. P., Freed, A. D. and Jordan, E. H., "Microstress Analysis of Periodic Composites," Comp. Engng, 1, 29-40.
46. 1991 Zhenhai, X., Zhiying, M. and Yaohe, Z., "Effect of Fibre Distribution on Infiltration Processing and Fracture Behavior of Carbon Fibre-Reinforced Aluminum Composites," Z. Metall. 8(10), 766-768.
47. 1992 Aboudi, J. and Pindera, M-J., "Micromechanics of MMCs Using the Generalized Method of Cells Model: User's Guide," NASA CR 190756, NASA-Lewis Research Center, Cleveland, OH.
48. 1992 Bigelow, C. A., "The Effects of Uneven Fiber Spacing on Thermal Residual Stresses in a Unidirectional SCS-6/Ti-15-3 Laminate," J. Comp. Technol., Research, JCTRER, 14(4), 211-220.
49. 1992 Majumdar, B. S. and Newaz, G. M., "Inelastic Deformation of MMCs: Plasticity and Damage Mechanisms," Phil. Mag., 66 (2), 187-212.
50. 1992 Paley, M. and Aboudi, J., "Micromechanical Analysis of Composites by the Generalized Cells Model," Mechan. Mater., 14, 127-139.
51. 1993 Aboudi, J., "Constitutive Behavior of Multiphase MMCs With Interfacial Damage by The Generalized Cells Model", in G. Z. Voyiadjis (ed.), Damage in Composite Materials. Studies in Applied Mechanics 34. Elsevier, Amsterdam, pp. 3-22.
52. 1993 Aboudi, J., Pindera, M-J. and Arnold, S. M., "Thermoelastic Response of MMCs with Large-Diameter Fibers Subjected to Thermal Gradients," NASA TM 106301, NASA-Lewis Research Center, Cleveland, OH.
53. 1993 Arnold, S. M., Wilt, T. E., Saleeb, A. F. and Castelli M. G., "An Investigation of Marco and Micromechanical Approaches for a Model MMC System", HITEMP Review 1993, NASA CP 19117, pp. 52:1-12.
54. Bohm, H. J., Rammerstorfer, F. G. and Weissenbek, E., "Some Simple Models for Micromechanical Investigations of Fiber Arrangement Effects in MMCs," Comp. Mater. Sci., 1, 177-194.
55. 1993 Lerch, B. A. and Saltsman, J. F., "Tensile Deformation of SiC/Ti-15-3 Laminates", in W. W. Stinchcomb and N. E. Ashbaugh (eds), Composite Materials: Fatigue and Fracture, Fourth Volume, ASTM STP 1156. ASTM, pp. 161-175.
56. Nakamura, T. and Suresh, S., "Effects of Thermal Residual Stresses and Fiber Packing on Deformation of Metal-Matrix Composites," Acta Metall. Mater. 41(6), 1665-1681.
57. 1993 Nemat-Nasser, S. and Hori, M., Micromechanics: Overall Properties of Heterogeneous Materials. North-Holland, New York.
58. 1993 Pagano, N. J. and Brown, H. W., "The Full-Cell Cracking Mode in Unidirectional Brittle-Matrix Composites," Composites, 24(2), 69-83.
59. 1993 Pindera, M-J., "Micromechanical Aspects of Yielding and Failure Criteria of Composites," in J. P. Boehler (ed). Failure Criteria of Structured Media (Proc. CNRS Int. Colloquium No. 351, 1983), pp. 121-143, A. Balkema, Rotterdam.
60. 1993 Robertson, D. D. and Mall, S., "Micromechanical Relations for Fiber-Reinforced Composites Using the Free Transverse Shear Approach", J. Comp. Technol., Research, JCTRER, 15(3), 181-192.
61. 1994 Aboudi, J., "Micromechanical Analysis of Thermo-Inelastic Multiphase Short-Fiber Composites," NASA CR 195290, NASA-Lewis Research Center, Cleveland, OH.
62. 1994a Aboudi, J., Arnold, S. M. and Pindera, M-J., "Response of Functionally Graded Composites to Thermal Gradients," Comp. Engng, 4, 1-18.
63. 1994b Aboudi, J., Pindera, M-J. and Arnold, S. M., "Elastic Response of MMCs with Tailored Microstructures to Thermal Gradients," Int. J. Sol. Struct., 31(10), 1393-1428.
64. 1994 Arnold, S. M. and Saleeb, A. F., "On the Thermodynamic Framework of Generalized Coupled Thermoelastic Viscoplastic - Damage Modeling", Int. J. Plast., 10(3), 263-278. Also NASA TM 105349, 1991.
65. 1994a Arnold, S. M., Saleeb, A. F. and Castelli, M. G., "A Fully Associative, Nonlinear Kinematic, Unified Viscoplastic Model for Titanium Based Matrices', NASA TM-106609, NASA Lewis Research Center, Cleveland, OH.
66. 1994b Arnold, S. M., Saleeb, A. F. and Castelli, M. G., "A Fully Associative, Nonisothermal, Nonlinear Kinematic, Unified Viscoplastic Model for Titanium Alloys", NASA TM-106926, NASA Lewis Research Center, Cleveland, OH.
67. 1994 Lissenden, C. J., Pindera, M-J. and Herakovich, C. T., "Stiffness Degradation of SiC/Ti Tubes Subjected to Biaxial Loading," Comp. Sci. Technol., 50, 23-36.
68. 1994 Mueller, A. C., "A Finite Element Method for Microstructural Analysis" Comp. Engng, 4(3), 361-376.
69. 1994 Robertson, D. D. and Mall, S., "Micromechanical Analysis of Metal Matrix Composite Laminates With Fiber/Matrix Interfacial Damage", Comp. Engng, 4(2), 1257-1274.
70. 1994 Wilt, T. E. and Arnold S. M., "Micromechanics Analysis Code (MAC) User Guide: Version 1.0", NASA TM 106706, NASA Lewis Research Center, Cleveland, OH.
71. 1995 Aboudi, J., Pindera, M-J. and Arnold, S. M., "Thermo-Inelastic Response of Functionally Graded Composites," Int. J. Sol. Struct., 32(12), 1675-1710.
72. 1995a Arnold, S. M., Saleeb, A. F. and Wilt, T. E., "A Modeling Investigation of Thermal and Strain Induced Recovery and Nonliner Hardening in Potential Based Viscoplasticity," J. Engng. Mat. Technol., 117(2) 157-167. Also NASA TM-106122, 1993.
73. 1995b Arnold, S. M., Pindera, M-J. and Wilt, T. E., "Influence of Fiber Architecture on the Elastic and Inelastic Response of MMCs," NASA TM 106705, NASA Lewis Research Center, Cleveland, OH.
74. 1995 Wilt, T. E., "On the Finite Element Implementation of the Generalized Method of Cells Micromechanics Constitutive Model", NASA CR 195451.