Toward manufacturing and cost considerations in multidiscbplinary aircraft design

37th AIAA/ASME/ASCE/AHS/ASC Structure, Structural Dynamics and Materials Conference

Volumn , Issue , 1996, Pages 2602-2612

  Rais Rohani, M ^a   Dean, E B ^b  

^a MISSISSIPPI STATE UNIVERSITY   (United States)

^b NASA LANGLEY RESEARCH CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONCURRENT ENGINEERING; COST ENGINEERING; COSTS; FIGHTER AIRCRAFT; INDUSTRIAL RESEARCH; MANUFACTURE; PRODUCT DESIGN; STRUCTURAL DYNAMICS; AIRCRAFT MANUFACTURE; COMPOSITE MATERIALS; MANAGEMENT; MARKETING; OPTIMIZATION; QUALITY ASSURANCE; STRUCTURAL DESIGN;

ACCURATE PREDICTION; CUSTOMER REQUIREMENTS; LITERATURE SURVEY; MANUFACTURING COMPLEXITY; MANUFACTURING COST; MANUFACTURING COST MODELS; MULTIDISCIPLINARY AIRCRAFT DESIGN; PERSPECTIVE VIEWS;

STRUCTURAL DESIGN; AIRCRAFT;

GENOPERSISTATION; MANUFACTURING COST; MANUFACTURING INFLUENCE FACTORS; MULTIDISCIPLINARY AIRCRAFT DESIGN; MULTIDISCIPLINARY DESIGN OPTIMIZATION; PRODUCT QUALITY;

EID: 0029699930     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.1996-1620     Document Type: Conference Paper

References (48)

1. Dean, E.B., “Genopersisting the System”, presented at the AIAA/AHS/ASEE Aerospace Design Conference, Irvine, CA, Feb. 16-19, 1993, AIAA paper no. 93-1031.
2. Gutowski, T., Henderson, R., and Shipp, C. “Manufacturing Costs for Advanced Composites Aerospace Parts,” SAMPE Journal, Vol. 27, No. 3.
3. Hirt, RJ. “Air Force Design-To-Cost Methodology Development,” Proceedings of the 21st National SAMPE Symposium and Exhibition, Los Angeles, CA, April 6-8, 1976.
4. Brown, A.S., “Composite Makers Teach Old Processes New Tricks,” Aerospace America, June 1994.
5. Author unknown, “Designing for Manufacture and Assembly,” Aerospace America, August 1994.
6. Ethell, J.L., “NASA's Blueprint for a General Aviation Renaissance,” Aerospace America, October 1994.
7. Boothroyd, G., Dewhurst, P., and Knight, W., Product Design for Manufacture and Assembly. Marcel Dekker, Inc., 1994.
8. Ramkumar, R.L., Vastava, R.B., and Saha, S.K., “Manufacturing Cost Model for Composites,” Proceedings of the 23rd International SAMPE Technical Conference, October, 1991, pp. 982-994.
9. Schmit, L.A., “Structural Analysis - Precursor and Catalyst,” in Recent Experiences in Multidisciplinary Analysis and Optimization, NASA CP-2327, Part 1, 1984, pp. 1-17.
10. Tolson, R.H. and Sobieszczanski-Sobieski, J., “Multidisciplinary Analysis and Synthesis: Needs and Opportunities,” Proceedings of the 26th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, AIAA, New York; AIAA Paper 85-0584, 1985.
11. Sobieszczanski-Sobieski, J. and Haftka, R.T., “Interdisciplinary and Multilevel Optimum Design,” ComputeAided Optimal Design: Structural and Mechanical Systems, edited by C.A. Mota Scares, Springer-Verlag, Berlin, 1987, pp. 655-701.
12. Grossman, B., Gürdal, Z., Strauch, G.J., Eppard, W.M., and Haftka, R.T., “Integrated Aerodynamic/Structural Design of a Sailplane Wing,” Journal of Aircraft, Vol. 25, No. 9, 1988.
13. Grossman, B., Haftka, R.T., Kao, P.J., Polen, D.M., Rais-Rohani, M. and Sobieszczanski-Sobieski, J., “Integrated Aerodynamic-Structural Design of a Transport Wing,” AIAA Journal of Aircraft, Vol. 27, No. 12, 1990.
14. Livne, E., Schmit, L.A., and Friedmann, P.P., “Towards Integrated Multidisciplinary Synthesis of Actively Controlled Fiber Composite Wings,” AIAA Journal of Aircraft, Vol. 27, No. 12, 1990.
15. Dovi, A.R. and Wrenn, G.A., “Aircraft Design for Mission Performance Using Nonlinear Multiobjective Optimization Methods,” AIAA Journal of Aircraft, Vol. 27, No. 12, 1990.
16. Rais-Rohani, M., Haftka, R.T., Grossman, B. and Unger, E.R., “Integrated Aerodynamic-Structural- Control Wing Design,” International Journal of Computing Systems in Engineering, Vol. 3, No. 6, 1992.
17. Akao, Y., “Quality Function Deployment: Integrating Customer Requirements into Product Design,” Productivity Press, Cambridge, MA. 1990.
18. Yoshimura, M., “Concurrent Optimization of Product Design and Manufacture,” Concurrent Engineering. Contemporary issues and modern design tools, edited by Parsaei, H.R. and Sullivan, W.G., Ghapman and Hall publishers, pp. 159-183.
19. Evans, G.W., “An Overview of Techniques for Solving Multiobjective Mathematical Programs,” Management Science, Vol. 30, No. 11, pp. 1268-1282, November, 1984.
20. Turston, D.L., and Locascio, A., “Multiattribute Design Optimization and Concurrent Engineering,” Concurrent Engineering. Contemporary issues and modern design tools, edited by Parsaei, H.R. and Sullivan, W.G., Ghapman and Hall publishers, pp. 207-230.
21. Krammer J., Sensburg, O., Vilsmeier, J., and Berchtold, G., “Concurrent Engineering in Design of Aircraft Structures,” Journal of Aircraft, Vol. 32, No. 2, 1995.
22. Kessler, W.C., Shumaker, G.C., and Hithcock, M.F., “Early Manufacturing Consideration in Design,” Presented at an AGARD Meeting on Integrated Airframe Design Technology, April, 1993.
23. Marx, W.J., Mavris, D.N., and Schrage, D.P., “A Hierarchical Aircraft Life Cycle Cost Analysis Model,” AIAA Paper No. 95-3861, presented at the 1st AIAA Aircraft Engineering, Technology, and Operations Congress, Los Angeles, CA, September 19-21, 1995.
24. Schrage, D.P., and Mavris, D.N., “Integrated Product/Process Design/Development (IPPD) Through Robust Design Simulation,” AIAA Paper No. 95-3892, presented at the 1st AIAA Aircraft Engineering, Technologynd Operations Congress, Los Angeles, CA, September 19-21, 1995.
25. Unal, R. and Dean, E.B., “Design For Cost And Quality: The Robust Design Approach," Journal of Parametrics, Vol. 11, No. 1, 1991, pp. 73-93.
26. Unal, R. and Dean, E.B., “Taguchi Approach to Design Optimization for Quality and Cost: An Overview,” Presented at the 1991 Annual Conference of the International Society of Parametric Analysts.
27. Yurkovich, R., “The Use of Taguchi Techniques With the ASTROS Code For Optimum Wing Structural Design,” Proceedings of the 35th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Hilton Head, SC, April 18-20, 1994., Part 3, pp. 1334-1342.
28. Roy, R., A primer on the Taguchi method. Van Nostrand Reinhold, 1990.
29. Shankar, S.R. and Jansson, D.G., “A Generalized Methodology for Evaluating Manufacturability,” Concurrent Engineering. Contemporary issues and modern design tools, edited by Parsaei, H.R. and Sullivan, W.G., Ghapman and Hall publishers, pp. 248-263.
30. Kristinsdottir, B.P. and Zabinsky, Z.B., “Including Manufacturing Tolerances in Composite Design,” Proceedings of the 35th AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics, and Materials Conference, Hilton Head, SC, April 18-20, 1994., Part 3, pp. 1413-1422.
31. Liang, X. and Heppler, G.R., “Composite Material Manufacturing Tolerances to Meet C.T.E. Design Criteria,” Proceedings of the 35th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Hilton Head, SC, April 18-20, 1994., Part 1, pp. 360-368.
32. Kellas, S., Johnson, D.P., Morton, J. and Jackson, K.E., “Scaling Effects in Sublaminate-Scaled Composite Laminates,” Proceedings of the 34th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, La Jolla, CA, April 19-22, 1993.
33. Johnson, D. P., “The Effect of Specimen Size on the Mechanical Response of Laminated Composite Coupons Loaded in Tension and Flexure,” Ph.D. Dissertation, Engineering Science and Mechanics Dept., Virginia Polytechnic Institute and State University, Blacksburg, VA, 1994.
34. Zhang, C., and Wang, H., “Concurrent Optimization of Design and Manufacturing Tolerances,” Concurrent Engineering. Contemporary issues and modern design tools, edited by Parsaei, H.R. and Sullivan, W.G., Ghapman and Hall publishers, pp. 280-296.
35. Foley, M. and Bernardon, E., “Computer-based Manufacturing Cost Analysis for the Fabrication of Thermoplastic Composite Structures,” Presented at Composites in Manufacturing 9 Conference, San Diego, CA, January 15-18, 1990, Paper no. EM 90-100.
36. Noton, B.R., and Preston R.R., “Manufacturing Cost/Design Guide (MC/DG) for Metallic and Composite Structures,” Proceedings of the 22nd AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, Atlanta, GA., April 6-8, 1981, Part 1, pp. 445-462.
37. Kandebo, S.W., “Manufacturers Seek Reduced Costs Through New Fabrication Techniques,” Aviation Week and Space Technology, July 21, 1986, pp. 73-77.
38. Noton, B.R., “Optimizing Aerospace Structures for Manufacturing Cost,” Proceedings of the 13th International Congress on Aeronautical Sciences, 1982, pp. 1368-1385.
39. Dean, E.B., “Parametric Cost Analysis: A Design Function,” Transaction of the American Association of Cost Engineers 33rd Annual Meeting, San Diego, CA, June 25-28, 1989.
40. Dean, E.B., “The Design-To-Cost Manifold, ” Presented at the International Academy of Astronautics Symposium on Space Systems Cost Methodologies and Applications, San Diego, CA, May 10-11, 1990.
41. Korda, P., “MCPLXS Generation for Complex Structures,” Proceedings of the Annual Conference of the International Society of Parametric Analysts, Virginia Beach, VA, April 27-29, 1982, Vol. 1, No. 1.
42. Anon, PRICE H Reference Manual. General Electric Company, Moorestown, NJ, 1988.
43. Bettner, T.J., “Costs of Graphite Composite Fabrication and Repair,” Proceedings of the 11th National SAMPE Technical Conference, November 13-15, 1979, pp. 857-869.
44. Zaloom, V., and Miller, C., “A Review of Cost Estimating For Advanced Composite Materials Applications,” Engineering Costs and Production Economics, Vol. 7, 1982, pp. 81-86.
45. Noton, B.R., ICAM: Manufacturing Cost/Design Guide. Vol. I, II, and III, AFML-TR-76-227, Contract no. F33615-75-C-5194, prepared by Battelle's Columbus Laboratories, Columbus, OH., 1979.
46. Busch, J.V., and Poggiali, B., “Micro-Computer Based Cost Estimation for Composite Fabrication Processes,” Proceedings of the 31st International SAMPE Symposium and Exhibition, Los Angeles, CA, April 7-10, 1986, pp. 232-244.
47. Busch, J.V., “Micro-Computer Based Cost Estimation for the SMC Process,” Proceedings of the Second Conference on Advanced Composites, Dearborn, MI, Nov. 18-20, 1986, pp. 141-148.
48. Mabson, G.E., Flynn, B.W., Ilcewicz, L.B., and Graesser, D.L., “The Use of COSTADE in Developing Composite Commercial Aircraft Fuselage Structures,” Proceedings of the 35th AIAA/ASME/ASCE/AHS/ ASC Structures, Structural Dynamics and Materials Conference, Hilton Head, SC, April 18-20, 1994, Part 3, pp. 1384-1393.