Interlaminar fracture characterization

Key Engineering Materials

Volumn 120-121, Issue , 1996, Pages 329-346

  Martin, R H ^a,b  

^a ANALYTICAL SERVICES AND MATERIALS INC   (United States)

^b Mat Eng Research Laboratory Ltd   (United Kingdom)

Author keywords

Delamination; Double Cantilever Beam; End Notched Flexure; Interlaminar Fracture Toughness; Split Cantilever Beam; Strain Energy Release Rate

Indexed keywords

BENDING (DEFORMATION); BRITTLENESS; DELAMINATION; DUCTILITY; FATIGUE TESTING; FIBER REINFORCED MATERIALS; FRACTURE TESTING; FRACTURE TOUGHNESS; STRAIN RATE;

DOUBLE CANTILEVER BEAM; END NOTCHED FLEXURE; INTERLAMINAR FRACTURE; SPLIT CANTILEVER BEAM; STRAIN ENERGY RELEASE RATE;

LAMINATED COMPOSITES;

EID: 0029695180     PISSN: 10139826     EISSN: 16629795     Source Type: Book Series    
DOI: None     Document Type: Article

References (76)

1. T. K. O'Brien and R. H. Martin, Journal of Composites Technology & Research, Vol. 15, No. 4, pp. 269-281, Winter (1993).
2. R. H. Martin and G. B. Muni, ASTM STP 1059, S.P. Garbo, Ed., ASTM, Philadelphia, pp. 251-270, (1990).
3. D. J. Wilkins, et al, ASTM STP 775, K.L. Reifsnider, Ed., ASTM, Philadelphia, pp. 168-183, (1982).
4. J. M. Whitney, et al, J. of Reinforced Plastics and Composites, Vol. 1, pp. 297-313, October (1982).
5. D. R. Carlile and D. C. Leach, Proceedings of the 15th National SAMPE Technical Conference, pp. 82-93, October (1983).
6. F. X. de Charentenay, et al, ASTM STP 836, D.J. Wilkins, Ed., ASTM, Philadelphia, pp. 84-103, (1984).
7. P. E. Keary, et al, J. of Composite Materials, Vol. 19, pp. 154-177, March (1985).
8. R. L. Ramkumar and J. D. Whitcomb, ASTM STP 876, W.S. Johnson, Ed., ASTM, Philadelphia, pp. 315-335, (1985).
9. R. H. Martin, Proceedings of the American Society for Composites, Third Technical Conference, Seattle, Washington, pp. 688-701, September (1988).
10. P. Davies, et al, Composites Science and Technology, Vol.35, pp. 301-313, (1989).
11. Y. J. Prel, et al, ASTM STP 1012, P.A. Lagace, Ed., ASTM, Philadelphia, pp. 251-269, (1989).
12. S. Mall, et al, ASTM STP 1012, P.A. Lagace, Ed., ASTM, Philadelphia, pp. 296-310, (1989).
13. G. B. Muni and R. H. Martin, ASTM STP 1156, W.W. Stinchcomb and N.E. Ashbaugh, Eds., ASTM, Philadelphia, pp. 239-256, (1993).
14. W. M. Jordan, Proceedings of the American Society for Composites, 3rd Technical Conference, Seattle, pp. 495-502, September (1988).
15. I. Chou, et al, ASTM STP 1230, R.H. Martin, Ed., ASTM, Philadelphia, (1994).
16. J. H. Crews Jr., et al, AIAA-89-1300, Proceedings of the 30th AIAA/ASME/ASCE/AHS/ASC Conference on Structures, Structural Dynamics and Materials, Mobile, Alabama, pp. 1242-1249, April 3-5 (1989).
17. B. D. Davidson, J. of Composite Materials, Vol. 24, pp. 1124-1137, November (1990).
18. M.F. Kanninen, et al, ASTM STP 627, G.T. Hahn and M.F. Kanninen, Eds., ASTM, Philadelphia, pp. 19-38, (1977).
19. P. Davies, et al, Composites Science and Technology, Vol. 36, No. 2, pp. 153-166, (1989).
20. P. Davies, Composites Science and Technology, Vol. 43, No.2, pp. 129-136, (1992).
21. M. Hojo, et al, ASTM STP 1156, W.W. Stinchcomb and N.E. Ashbaugh, Eds., ASTM, Philadelphia, pp. 281-298, (1993).
22. J. D. Whitcomb, J. of Composites Technology and Research, Vol.7, No.2, pp. 64-66, Summer (1985).
23. J. G. Williams, J. of Composite Materials, Vol. 21, pp. 330-347, April (1987).
24. R. A. Naik, et al, ASTM STP 1110, T.K. O'Brien, Ed., ASTM, Philadelphia, pp. 169-186, (1991).
25. A. J. Russell, Defence Research Establishment Pacific (DREP), Canada, Materials Report 82-Q, December (1982).
26. W. S. Johnson and P. D. Mangalgiri, J. of Composites Technology and Research, Vol. 9, No. 1, pp. 10-13, Spring (1987).
27. C. Corletto, et al, Proceedings of the 6th ICCM and 2nd ECCM Conference, Elsevier Applied Science, London, Vol. 3, pp. 3.378-3.387, July (1987).
28. G. B. Muni and T. K. O'Brien, AIAA-85-0647, Proceedings of the 26th AIAA/ASME/ASCE/AHS Conference on Structures, Structural Dynamics and Materials, Orlando, Florida, pp. 197-202, April (1985).
29. T. K. O'Brien, et al, ASTM STP 1012, P.A. Lagace, Ed., ASTM, Philadelphia, pp. 222-250, (1989).
30. K. Walter, et al, J. of Materials Science, Vol. 24, pp. 3387-3398, (1989).
31. T. de Kalbermatten, et al, EMPA Report No. 116598/ZEP, Swiss Federal Laboratories for Materials Testing and Research, Dubendorf, Switzerland, September (1990).
32. J. P. Berry, J. of Applied Physics, Vol. 34, pp. 62-68, January (1963).
33. S. Hashemi, et al, J. of Materials Science Letters, Vol. 8, pp. 125-129, (1989).
34. W. -T. Chang, et al, Proceedings of the Fourth European Conference on Composite Materials, Stuttgart, F.R.G., pp. 503-508, September (1990).
35. A. J. Russell and K. N. Street, ASTM STP 937, N.J. Johnston, Ed., ASTM, Philadelphia, pp. 275-294, (1987).
36. A. J. Russell, ASTM STP 1110, T.K. O'Brien, Ed., ASTM, Philadelphia, pp. 226-242, (1991).
37. K. Kageyama, et al, ASTM STP 1110, T.K. O'Brien, Ed., ASTM, Philadelphia, pp. 210-225, (1991).
38. J. G. Williams, J. of Composite Materials, Vol. 21, pp. 330-347, April (1987).
39. P. Davies, et al, J. of Materials Science Letters, Vol.9, pp. 1349-1350, Nov. (1990).
40. S. A. Salpekar, et al, J. of Composites Technology and Research, Vol. 10, No. 4, pp. 133-139, Winter (1988).
41. S. Hashemi, et al, Proceedings of the Royal Society of London, A427, pp. 173-199, 1990.
42. C. R. Corletto, M.Sc. Thesis, Texas A&M University, Texas, (1986).
43. T. K. O'Brien, et al, Proceedings of the International Conference on Testing, Evaluation, and Quality Control of Composites, University of Surrey, Guildford, U.K., pp. 223-232, Sept. (1983).
44. J. M. Whitney and M. Knight, ASTM STP 876, W.S. Johnson, Ed., ASTM, Philadelphia, pp. 298-314, (1985).
45. M. Arcan, et al, Experimental Mechanics, Vol. 8, pp. 141-146, April (1978).
46. W. L. Bradley and R. N. Cohen, ASTM STP 876, W.S. Johnson, Ed., ASTM, Philadelphia, pp. 389-410, (1985).
47. A. J. Russell and K. N. Street, ASTM STP 876, W.S. Johnson, Ed., ASTM, Philadelphia, pp. 349-370, (1985).
48. S. Hashemi, et al Proceedings of the 6th ICCM and 2nd ECCM Conference, Elsevier Applied Science, London, Vol. 3, pp. 3.254-3.264, July (1987).
49. X. -J. Gong and M. Benzeggagh, ASTM STP 1230, R.H. Martin, Ed., ASTM, Philadelphia, (1994).
50. J. R. Reeder and J. H. Crews, Jr., AIAA Journal, Vol. 28, No. 7, pp. 1270-1276, July (1990).
51. J. R. Reeder and J. H. Crews Jr., Proceedings of ICCM VIII, Composites, Design and Manufacture, S.W. Tsai and G.S. Springer, Eds., SAMPE, Covina, 36-B, July (1991).
52. P. Sriram, et al, ASTM STP 1230, R.H. Martin, Ed., ASTM, Philadelphia, (1994).
53. T. K. O'Brien, et al, J. of Composites Technology & Research, Vol. 8, No. 2, pp. 37-47, Summer (1986).
54. S. J. Hooper, et al, ASTM STP 1110, T.K. O'Brien, Ed., ASTM, Philadelphia, pp. 89-106, (1991).
55. R. H. Martin, ASTM STP 1174, C.E. Harris and T.S. Gates, Eds., ASTM, Philadelphia, pp. 39-65, (1993).
56. S. A. Salpekar, et al, Proceedings of the American Society for Composites, Third Technical Conference, Seattle, WA, pp. 642-654, September (1988).
57. J. D. Whitcomb, ASTM STP 1059, S.P. Garbo, Ed., ASTM, Philadelphia, pp. 215-230, (1990).
58. T. K. O'Brien and I. S. Raju, AIAA-84-0961, Proceedings of the 25th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, May (1984).
59. G. Becht and J. W. Gillespie Jr., Proceedings of the American Society for Composites, Second Technical Conference, Newark, Delaware, pp. 9-18, September (1987).
60. S. L. Donaldson, Proceedings of the 6th ICCM & 2nd ECCM Conference, Elsevier Applied Science, London, Vol. 3, pp. 3.274-3.283, July (1987).
61. C. L. Lingg, et al, Proceedings of the American Society for Composites, Fourth Technical Conference, Blacksburg, Virginia, pp. 267-276, October (1989).
62. R. H. Martin, ASTM STP 1110, T.K. O'Brien, Ed., ASTM, Philadelphia, pp. 243-266, (1991).
63. F. Sharif, et al, ASTM STP 1230, R.H. Martin, Ed., ASTM, Philadelphia, (1994).
64. P. Robinson, and D. Q. Song, Proceedings of the 2nd International Conference on Deformation and Fracture of Composites, UMIST, Manchester, U.K., March (1993).
65. S.M. Lee, Journal of Composites Technology and Research, Vol. 15, No.3 pp. 193-201, Fall (1993).
66. C. Bathias, C. and A. Laksimi, ASTM STP 876, W.S. Johnson, Ed., ASTM, Philadelphia, pp. 217-237, (1985).
67. M. Hojo, et al, Composites Science and Technology, 29, pp. 273-292, (1987).
68. A. J. Russell and K. N. Street, ASTM STP 972, J.D. Whitcomb, Ed., ASTM, Philadelphia, pp. 259-277, (1988).
69. M. Hojo, et al, JSME International Journal, Series I, Vol.32, No. 2, pp. 292-299, (1989).
70. A. J. Russell and K. N. Street, ASTM STP 1012, P.A. Lagace, Ed., ASTM, Philadelphia, pp. 162-178, (1989).
71. R. H. Martin, Proceedings of the Mechanics Computing in 1990 and Beyond Conference, Columbus, Ohio, Vol. 2, pp. 943-948, May (1991).
72. T. K. O'Brien, ASTM STP 1059, S.P. Garbo, Ed., ASTM, Philadelphia, pp. 7-33, (1990).
73. P. Davies, et al, ASTM STP 1110, T.K. O'Brien, Ed., ASTM, Philadelphia, pp. 70-88, (1991).
74. T. K. O'Brien, et al, International Journal of Fatigue, Vol. 11, No. 6, pp. 379-393, (1989).
75. G. B. Muni, et al, ASTM STP 1110, T.K. O'Brien, Ed., ASTM, Philadelphia, pp. 312-339, (1991).
76. R. H. Martin, and W. C. Jackson, ASTM STP 1156, W.W. Stinchcomb and N.E. Ashbaugh, Eds., ASTM, Philadelphia, pp. 105-126, (1993).