Heat balance reaction calorimetry and its applications in ethylene polymerizations

Acta Polytechnica Scandinavica, Chemical Technology Series

Volumn , Issue 236, 1996, Pages

  Lahti, Mikko ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Calorimetry; Dynamic modelling; Ethylene polymerization; Heat balance calorimeter; Metallocene polymerizations; Reaction calorimetry

Indexed keywords

CALORIMETERS; CATALYST DEACTIVATION; ETHYLENE; HEAT TRANSFER; MASS TRANSFER; MATHEMATICAL MODELS; POLYMERIZATION; SLURRIES; VISCOSITY OF LIQUIDS; CALORIMETRY; CATALYSTS; COMPUTER SIMULATION; HEAT TRANSFER COEFFICIENTS; METALLORGANIC POLYMERS; MIXTURES; VISCOSITY;

HEAT BALANCE CALORIMETER; METALLOCENE POLYMERIZATIONS; REACTION CALORIMETRY; DYNAMIC MODELLING; ETHYLENE POLYMERIZATION; HEAT BALANCE CALORIMETRY; MASS TRANSFER RESISTANCE EFFECT; METALLOCENE POLYMERIZATION; THERMAL MODEL;

CALORIMETRY; CALORIMETERS;

EID: 0029694991     PISSN: 12390518     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (72)

1. Moritz, H.-U., Polymerization calorimetry - A powerful tool for reactor control, Polymer reaction engineering: Proceedings of the third Berlin international workshop on polymer reaction engineering, VCH Publishers, New York, 1989, p.248-266.
2. Moritz, H.-U., Rechnergestützer Laborreaktor zur Emulsionspolymerisation von Vinylacetat, Habilitation Thesis, TU Berlin, 1988.
3. Schmidt, Ch.-U., Reaktionskalorimetrie und sichere Reaktionsführung von Polymerisationen, Ph. D. Thesis, TU Berlin, 1988.
4. Regenass, W., Calorimetric monitoring of industrial chemical process, Thermochim. Acta Vol. 95 (1985), p. 351-368.
5. Karlsen, L.G. and Villadsen, J., Isothermal reaction calorimeters -I. A literature review, Chem. Eng. Sci. Vol. 42 (1987), p. 1153-1164.
6. Rouquerol, J. and Zielenkiewitcz, W., Suggested practice for classification of calorimeters, Thermochim. Acta Vol. 109 (1986), p. 121-137.
7. Vyazovkin, S.V., Lesnikovich, A.I. and Goryachko, V.I., A method of comparing kinetic curves obtained under isothermal and non isothermal conditions, Thermochim. Acta Vol. 177 (1991), p. 259-264.
8. Li, C.H., An integral approximation formula for kinetic analysis of non-isothermal DTA data, AIChEJ. Vol. 31 (1985), p. 1036-1038.
9. Andersen, H.M., Polymerization rates by calorimetry II, J. Polym. Sci. Vol. 7 (1969), p. 2889-2896.
10. Köhler, W., Riedel, O. and Scherer, H., Ein mit Heizpulsen gesteuertes isothermes Kalorimeter. Teil I, Chem. Ing. Tech. Vol. 44 (1972), p. 1216-1218.
11. Köhler, W., Riedel, O. and Scherer, H., Ein mit Heizpulsen gesteuertes isothermes Kalorimeter. Teil II, Chem. Ing. Tech. Vol. 45 (1973), p. 1286-1294.
12. Schildknecht, J., Reaction calorimeter for applications in chemical process industries: performance and calibration, Thermochim. Acta Vol. 49 (1981), p. 87-100.
13. Igarashi, S. and Katayama, S., A constant heat-flux calorimeter for measuring heat transfer data, Eur. Pol. J. Vol. 15 (1979), p. 805-809.
14. Litz, W., The thermokinetic reactor TKR and its possible applications in chemical research and engineering, J. Thermo. Anal. Vol. 27 (1983), p. 215-228.
15. Horak, J. and Silhanek, J., A simple principle of reaction calorimetry, Thermochim. Acta Vol. 92 (1985), p. 269-272.
16. Wright, T.K. and Butterworth, C.W., Isothermal heat flow calorimeter, Inst. Chem. Eng. Symp. Ser. Vol. 102 (1987), p. 85-96.
17. Schildknecht, J., Development and application of a mini-pilot reaction calorimeter, 2nd Int. Symp. Loss Prevention and Safety Promotion in the Process Industries, Preprints III, Heidelberg, 1977, p. 139-144.
18. Nilsson, H., Silvegren, C. and Törnell, B., A calorimetric investigation of suspension and emulsion polymerization of vinyl chloride, Angew. Makromol. Chem. Vol. 112 (1983), p. 125-142.
19. Jacobsen, J.P., Reaction calorimeter - A useful tool in chemical engineering, Thermochim. Acta Vol. 160 (1990), p. 13-23.
20. Christensen, J.J., Brown, P.R. and Izatt, R.M., An isothermal flow calorimeter for high temperature aqueous solutions, Thermochim. Acta Vol. 99 (1986), p. 159-168.
21. Oscarson, J.L., Chen, X., Gillespie, S.E. and Izatt, R.M, An isothermal flow calorimeter for high temperature basic solutions, Thermochim. Acta Vol. 185 (1991), p. 51-61.
22. Regenass, W., A new bench-scale heat-flow calorimeter and its applications to industrial kinetics, Therm. Anal. Proc. Int. Conf., 4th Meeting, London 1974, p. 823-834.
23. Regenass, W., Thermoanalytic methods in chemical process development, Thermochim. Acta Vol. 20 (1977), p. 65-79.
24. Regenass, W., Thermal and kinetic design data from a bench-scale heat flow calorimeter, ACS Symp. Ser. Vol. 65 (1978), p. 37-49.
25. Bourne, J.R., Buerli, M. and Regenass, W., Applications of heat flow calorimetry to measuring heat transfer to agitated suspensions, Inst. Chem. Eng. Symp. Ser. Vol. 64 (1981), p. E1-E12.
26. Brogli, F., Giger, G., Randegger, H. and Regenass, W., Assessment of reaction hazards by means of a bench scale heat flow calorimeter, Inst. Chem. Eng. Symp. Ser. Vol. 68 (1981), p. 3M1-3M10.
27. Giger, G., Aichert, A. and Regenass, W., Ein Wärmeflusskalorimeter für datenorientierte Prozessentwicklung, Swiss Chem. Vol. 4 (1982), p. 33-35.
28. Regenass, W., Thermische methoden zur Bestimmung der makrokonetik, Chimica Vol. 37 (1983), p. 430-437.
29. Regenass, W., Achieving safe process for chemical production, Swiss Chem. Vol. 5 (1983), p. 37-41.
30. Regenass, W., The control of exothermic reactors, Inst. Chem. Eng. Symp. Ser. Vol. 85 (1984), p. 1-11.
31. Karlsen, L.G., Soeberg, H. and Villadsen, J., Optimal data acquisition for heat flow calorimeter, Thermochim. Acta Vol. 72 (1984), p. 83-94.
32. Gross, B., Riesen, R. and Vogel, K., Reaction calorimetry for the development of chemical reactions, Thermochim. Acta Vol. 114 (1987), p. 83-90.
33. Riesen, R., Bilanz-Reaktionskalorimetrie , Thermochim. Acta Vol. 119 (1987), p. 219-225.
34. Moritz, H.-U. and Reichert, K.-H., Mikrocomputergesteuerter Laborreaktor zur Durchführung von Polymerisation, Chem. Ing. Tech. Vol. 57 (1985), p. 783-785.
35. Moritz, H.-U., Rechnergestützter Laborreaktor, Chem. Ind. Vol. 5 (1988), p. 190-194.
36. Meeks, M.R., An analog computer study of polymerization rates in vinyl chloride suspensions, Polym. Eng. Sci. Vol. 9 (1969), p. 39-46.
37. Hentschel, B., Ein automatisches, kontinuierlich registrierendes isothermes Kalorimeter -inbesondere zur Bestimmung der Polymerisationskinetik, Chem. Ing. Tech. Vol. 51 (1979), p. 823.
38. Nilsson, H., Silvegren, C. and Törnell, B., A calorimetric reactor system for kinetic studies of heterogeneous polymerizations, Chemica Scripta Vol. 19 (1982), p. 164-171.
39. Hub, L., Two calorimetric methods for investigation dangerous reactions, Chem. E. Symp. Ser. Vol. 49 (1977), p. 39-46.
40. Fiaty, K., Accary, A., Jallut, C. and Crouslé, O., Calibration of a discontinuous reaction calorimeter by a set of specific transient experiments, Thermochim. Acta Vol. 188 (1991), p. 191-200.
41. Jallut, C., Crignon, A.M., Thomas, G., Fiaty, K., Accary, A. and Chapat, C., Dynamic modelling and simulation of batch reactors. Applications to heat transfer, Computer Applications in Chemical Engineering, Elsevier Sci. Publ. B. V., Amsterdam 1990, p. 291-296.
42. Schmidt, C.-U. and Reichert, K.-H., Polymerisationskalorimeter, Chem. Ing. Tech. Vol. 59 (1987), p. 739-742.
43. Poersch-Panke, H-G., Aufbau eines Reaktionskalorimeters, Master Thesis, TU Berlin, 1988.
44. Poersch-Panke, H.-G., Reaktionskalorimetrie und die reaktionstechnische Untersuchung der Fällungspolymerisation von Acrylsäure, Ph. D. Thesis, TU Berlin, 1991.
45. Poersch-Panke, H.-G., Avela, A. and Reichert, K.-H., Ein Reaktionskalorimeter zur Untersuchung von Polymerisationen, Chem. Ing. Tech. Vol. 61(1989), p. 808-810.
46. Wu, R.S.H., Dynamic thermal analyzer for monitoring batch process, Chem. Eng. Progr. Vol. 81 (1985), p. 57-61.
47. Horak, J., Rosol, P. and Bartholomae, I., Control of cascade of CSTR with an auto catalytic reaction. Isothermal regime, Collect. Czech. Chem. Commun. Vol. 54 (1987), p. 3069-3082.
48. Reichert, K.-H., Temperature oscillation calorimetry in stirred tank reactors with variable heat transfer, European Federation of Chemical Engineering Working Party "Polymer Reaction Engineering" Second Meeting, Loughborough University of Technology, UK, 18.-19.09 1994.
49. Bourne, J. R., Buerli, M. and Regenass, W., Heat transfer and power measurements in stirred tank using heat flow calorimeter, Chem. Eng. Sci. Vol. 36 (1981), p. 347-354.
50. Wilson, E. E., A basis for rational design of heat transfer apparatus, The American Society of Mechanical Engineers Vol. 1477 (1915), p.47.
51. Uhl, V. W. and Gray, J. B., Mixing: Theory and Practice, Vol. 1. Academic Press, New York, 1966.
52. Michael, R. and Reichert, K.-H., Zur Viskosität von Polyethylen-Suspensionen, Chem. Ing. Tech. Vol. 56 (1983), p. 48-50.
53. Suuronen, M., Seppäl̈, J., Laine, J. and Elovainio, E., Rheological parameters of polyolefin suspensions, J. Appl. Polym. Sci. Vol. 34 (1987), p. 617-623.
54. Öztürk, S. S. and Shumpe, A., The influence of suspended solids on oxygen transfer to organic liquids in a bubble column, Chem. Eng. Sci. Vol. 42 (1987), p. 1781-1785.
55. Metzner, A. B. and Otto, R. E., Agitation of non-Newtonian fluids, AIChE J. Vol. 3 (1957), p. 3-10.
56. Jinescu, V.V., The rheology of suspensions, Int. Chem. Eng. Vol. 14 (1974), p. 397-420.
57. Eilers, H., Die Viskosität von Emulsionen hochviskoser Stoffe als Funktion der Konzentration, Kolloid Z. Vol. 97 (1941), p. 313.
58. Poersch-Panke, H.-G., Avela, A. and Reichert, K.-H., Precipitation polymerization of acrylic acid: kinetics, viscosity and heat transfer, Angew. Makromol. Chem. Vol. 206 (1993), p. 157-169.
59. Moritz, H.-U., Increase in viscosity and its influence on polymerization processes, Chem. Eng. Technol. Vol. 12 (1989), p. 71-87.
60. Mitsuishi, N. and Miyiairi, Y., Heat transfer to non-Newtonian fluids in an agitated vessel, J. Chem. Eng. Jpn. Vol. 6 (1973), p. 415.
61. Uhl, W. and Voznick, H. P., The anchor agitator, Chem Eng. Prog. Vol. 56 (1960), p. 72-77.
62. Nagata, S., Mixing principles, Wiley, Kodansha, Tokio, 1975.
63. Ishibashi, K. and Yamanaka, A., Heat transfer in agitated vessels with special types of impellers, J. Chem. Eng. Jpn. Vol. 12 (1979), p. 230-236.
64. Lewin, T., Hildebrandt, V. and Reichert, K.-H., Wärmeübergang der Polymerization in einem Rührkesselreaktor, Chem. Ing. Tech. Vol. 65 (1993), p. 739-741.
65. Shumpe, A., Saxena, A. K. and Fang, L. K., Gas-liquid mass transfer in a slurry bubble column, Chem. Eng. Sci. Vol. 42 (1987), p. 1787-1796.
66. Ryu, D. Y. and Humbhrey, A. E., A reassessment of oxygen-transfer rates in antibiotics fermentations, J. Ferment. Technol. Vol. 50 (1972), p. 424-431.
67. Hattori, K., Yokoo, S. and Imada, O., Oxygen transfer in a highly viscous solution, J. Ferment. Technol. Vol. 50 (1972), p. 737-741.
68. Gray, M. R., Mehta, B. and Masliyah, J. H., Liquid-side mass transfer coefficients for liquids and slurries in a rotating drum, Chem. Eng. Sci. Vol. 48 (1993), p. 3442-3446.
69. Albal, R. S., Shah, Y. T. and Shumpe, A., Mass transfer in multiphase agitated contractors, Chem. Eng. J. Vol. 27 (1983), p. 61-80.
70. Chang, P. and Wilke, C. R., Measurements of diffusion in liquids, J. Phys. Chem. Vol. 59 (1955), p. 592-596.
71. DuPlessis, J. P. and Masliyah, J. H., Flow through isotropic granular porous media, Transport Porous Media Vol. 6 (1991), p. 207-221.
72. Schmitz, M., Steiff, A. and Weinspach, P. M., Gas-liquid interfacial area per unit volume and volumetric mass transfer coefficient in stirred slurry reactors, Chem. Eng. Technol. Vol. 10 (1987), p. 204-215.