Tribological aspects of wheel-rail contact: A review of recent experimental research

Wear

Volumn 191, Issue 1-2, 1996, Pages 170-183

  Clayton, P ^a  

^a OREGON HEALTH AND SCIENCE UNIVERSITY   (United States)

Author keywords

Fatigue; Friction control; Rail wheel contact; Wear

Indexed keywords

RAILS; TRIBOLOGY; WHEEL/RAIL CONTACT; WHEELS;

FATIGUE OF MATERIALS; FRICTION; RAILROAD TRACKS; TRIBOLOGY; VEHICLE WHEELS;

WHEEL RAIL CONTACT;

INTERFACES (MATERIALS);

EID: 0029656805     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/0043-1648(95)06651-9     Document Type: Article

References (146)

1. A.W. Worth, J.R. Hornaday and P.R. Richards, Prolonging rail life through rail grinding, Proc. 3rd Int. Heavy Haul Railway Conf., Vancouver BC, 1986, AAR, Chicago, IL, 1987.
2. J. Kalousek, P. Sroba and C. Hegeland, Analysis of rail grinding tests and implications for corrective and preventive grinding, Proc. 4th Int. Heavy Haul Railway Conf., Brisbane, 1989.
3. S. Linn, D. Abell, J. Kalousek and P. Sroba, Planning of production rail grinding on Burlington Northern Railroad, Proc. 5th Int. Heavy Haul Railway Conf., Bejing, 1993.
4. S.T. Lamson and B.H. Longson, Development of rail profile grinding at Hamersley Iron, Proc. 2nd Int. Heavy Haul Railway Conf., Colorado Springs, CO, 1982, pp. 372-379.
5. Association of American Railroads Symp. on Rail and Wheel Lubrication, Memphis, TN, 1987, AAR, Chicago, IL, 1993.
6. J. Dearden, The wear of steel rails: a review of the factors involved, Proc. Inst. Civil Eng., London, (May 1954).
7. J. Dearden, The wear of steel rails and tyres in service, Wear, 3 (1960) 43-59.
8. ERRI Question D173, Rolling Contact Fatigue, Rep. 1, Review of Rolling Contact Fatigue in Rails, European Railway Research Institute, Utrecht, Netherlands, April 1990.
9. P. Clayton and M.B.P. Allery, Metallurgical aspects of surface damage problems in rails, Can. Metall. Q., 21 (1) (1982) 31-46.
10. I.A. Reiner and D.E. Staplin, Empirical wear model, AREA Bull 697, 85 (1984) 237-267.
11. D.D. Davis, An economic analysis of lubrication effectiveness, Proc. Symp. on Rail and Wheel Lubrication, Memphis, TN, 1987, AAR, Chicago, IL, 1993.
12. P. Clayton and D. Danks, Effect of interlamellar spacing on the wear resistance of eutectoid steels under rolling-sliding conditions, Wear, 135 (1990) 369-389.
13. R. Devanathan and P. Clayton, Rolling-sliding wear behavior of three bainitic steels, Wear 151 (1991) 255-267.
14. J, Hannafious, FAST/HAL rail performance, Proc. Workshop on Heavy Axle Loads, Pueblo, CO, Oct 14-17, AAR, Chicago, IL, 1990.
15. P. Clayton, Improved fracture toughness rail steel - Brixton site trials, British Rail, R and D Division Tech. Note FM 34, 1974.
16. M.B. Hargrove, F.S. Mitchell, R.K. Steele and R.E. Young, The wear behavior of high rails in the first metallurgy experiment, 0-135 MGT, Rep. FRA/TTC-81/04, US Dept. of Transportation, 1981.
17. P. Mutton, C. Epp and S. Marich, Rail assessment, Proc. 2nd Int. Heavy Haul Railway Conf., Colorado Springs, CO, 1982, pp. 330-338.
18. P.J. Bolton, HORACE - head of rail area computing equipment, British Rail Research and Development Rep. TM Met 64, 1980.
19. C. Esvald, In track quality control and assessment of rails, in J.J. Kalker, D.F.C. Cannon and O. Orringer (eds.), Rail Quality and Maintenance for Modern Railway Operation, Kluwer, Dordrecht, 1993, pp. 137-147.
20. T.J. Devine and R.H. Alber, Wheel flange wear test results in heavy haul service, Proc. 2nd Int. Heavy Haul Railway Conf., Colorado Springs, CO, 1982, pp. 633-645.
21. R.K. Steele and R. Reiff, Rail: its behavior and relationship to total system wear, Proc. 2nd Int. Heavy Haul Railway Conf., Colorado Springs, CO, 1982, pp. 227-276.
22. P. Clayton, The relations between wear behavior and basic material properties for pearlitic steels, Wear, 60 (1980) 75-93.
23. R. Reiff, Defect and wear studies on wear experiment RME IV, 0-35 MGT, Rep. TTC-030 (FAST-TN85), US Dept. of Transportation, June 1985.
24. R.K. Steele, A perspectival review of rail behavior at FAST, Rep. FRA/TTC-81/07, US Dept. of Transportation, 1981.
25. R.K. Steele and T.J. Devine, Wear of wheel/rail systems, in J. Kalousek, R.V. Dukkipati and G.M.L. Gladwell, Contact Mechanics and Wear of Wheel Rail Systems, University of Waterloo Press, 1983.
26. I.J. McEwen and R.F. Harvey, Full scale wheel-on-rail wear testing: comparisons with service wear and a developing theoretical predictive method, Lubr. Eng., 41 (Feb. 1985) 80-88.
27. J. Kalousek, G. Rosval and H. Ghonem, Lateral creepage and its effect on wear in rail wheel interface, in J. Kalousek, R.V. Dukkipati and G.M.L. Gladwell, Contact Mechanics and Wear of Wheel Rail Systems, University of Waterloo Press, 1983.
28. J. Kalousek, D. M. Fegredo and E. E. Laufer, Wear resistance and worn metallography of pearlite, bainite and tempered microstructures of high hardness, Wear of Materials, ASME, 1985, pp. 212-232.
29. P. J. Mutton, The influence of microstructures on the wear behavior of rail and wheel materials, Masters Thesis, University of Melbourne, Australia, 1985.
30. S. Kumar, J. S. Kim and B. R. Rajkumar, A laboratory study of the dynamic nature of wheel/rail contact, in J. Kalousek, R.V. Dukkipati and G.M.L. Gladwell, Contact Mechanics and Wear of Wheel Rail Systems, University of Waterloo Press, 1983.
31. K. Sugino, H. Kageyama and M. Sato, Effect of wheel rail profiles on wear and fatigue behavior of rail, in G. M. Gladwell, H. Ghonem and J. Kalousek (eds.), Contact Mechanics and Wear of Wheel Rail Systems II, University of Waterloo Press, 1987.
32. T.M. Beagley, Severe wear of rolling/sliding contacts, Wear, 36 (1976) 317-335.
33. H. Krause and H. Lehna, Investigations of tribological characteristics of rolling/sliding friction systems by means of systematic wear experiments under well defined conditions, in G. M. Gladwell, H. Ghonem and J. Kalousek (eds.), Contact Mechanics and Wear of Wheel Rail Systems II, University of Waterloo Press, 1987.
34. H. Krause and G. Poll, Wear of wheel-rail surfaces, Wear, 113 (1986) 103-122.
35. W. Heller and R. Schweitzer, Hardness microstructure and wear behavior of steel rails, Proc. 2nd Int. Heavy Haul Railway Conf., Colorado Springs, CO, 1982, pp. 282-286.
36. W. Heller, R. Schweitzer and L. Weber, Modern developments in rail steel metallurgy and production, Can. Metall. Q., 21 (1) (1982) 3-15.
37. P.J. Bolton, P. Clayton and I.J. McEwan, Wear of rail and tire steels under rolling sliding conditions, ASLE Trans., 25, (1982) 17-24.
38. P.J. Bolton and P. Clayton, Rolling-sliding wear damage in rail and tyre steels, Wear, 93 (1984) 145-165.
39. D. Danks and P. Clayton, Comparison of the wear process for eutectoid rail steels: field and laboratory tests, Wear, 120 (1987) 233-250.
40. P. Clayton, D. Danks and R.K. Steele, Assessment of eutectoid rail steel wear performance using laboratory tests, Proc. Conf. Antiwear '88, September 20-22, 1988, The Royal Society of London, London, 1988.
41. P. Clayton and R. Devanathan, Rolling/sliding wear behavior of a chromium-molybdenum rail steel in pearlitic and bainitic conditions, Wear, 156 (1992) 121-131.
42. W.H. Hodgson, J.K. Yates and R.R. Preston, The development of a second generation of alloy steel rails for heavy haul applications, Proc. 2nd Int. Heavy Haul Railway Conf., Colorado Springs, CO, 1982, pp. 207-215.
43. J.E. Garnham and J.E. Beynon, Dry rolling-sliding wear of bainitic and pearlitic steels, Wear, 157 (1992) 81-109.
44. H. Ichinose, J. Takehara and M. Ueda, High strength rails produced by two stage flame heating and slack quenching, Proc. 2nd Int. Heavy Haul Railway Conf., Colorado Springs, CO, 1982, pp. 178-186.
45. H. Masumoto, K. Sugino and H. Hayashida, Development of wear resistant and anti-shelling high strength rails in Japan, Proc. Heavy Haul Railway Conf., Perth, Sept 1978, Inst. Engineers, Australia.
46. J.A. Elkins and R.J. Gostling, A general quasi-static curving theory for railway vehicles, Proc. 5th VSD-2nd IUTAM Symp., Vienna, September 1977.
47. C.D. Martland and A.R. Auzmendi, A simplified model for rail wear for use in track maintenance planning and costing, AAR Rep. R-742, February 1990.
48. G. Fleischer, H.D. Grohmann and D. Weinhauer, Tribological investigations of crack development on the rail on an energetical basis, in J.J. Kalker (ed.), Rail Quality and Maintenance for Modern Railway Operation, Kluwer, Dordrecht, 1993, pp. 407-424.
49. ERRI Question D173, Rolling Contact Fatigue, Rep. 10, Review of Rolling Contact Fatigue in Rails, European Railway Research Institute, Utrecht, Netherlands, 1993.
50. M. Godet, The third body approach: a mechanical view of wear, Wear, 100 (1984) 437-452.
51. K. Morton, D.F. Cannon, P. Clayton and E.G. Jones, The assessment of rail steels, in D.H. Stone and G.G. Krupp (eds.), Rail Steels - Developments, Processing and Use, ASTM STP 644, ASTM, Philadelphia, PA, 1978, pp. 80-98.
52. P. Clayton, K.J. Sawley, P.J. Bolton and G.M. Pell, Wear behavior of bainitic steels, Wear, 120 (1987) 199-220
53. N. Jin, Ph.D. Thesis, OGI, 1994.
54. K.J. Sawley, J.A. Benyon and E.G. Jones, Bainitic steels for railway wheels, 9th Int. Wheelset Congr., Montreal, 1988.
55. R.P. Reiff, Rail/wheel lubrication studies at FAST, Lubr. Eng., 42 (1986) 340-349.
56. J.M. Samuels and D.B. Tharp, Proc. Symp. on Rail and Wheel Lubrication, Memphis, TN, 1987, AAR, Chicago, IL, 1993.
57. G. Dahlman and M. Stehly, Energy savings from rail lubrication on the Santa Fe Railway, Proc. Symp. on Rail and Wheel Lubrication, Memphis, TN, 1987, AAR, Chicago, IL, 1993.
58. P. Clayton and D. Danks, Laboratory evaluation of wheel/rail lubricants, Proc. Symp. on Rail and Wheel Lubrication, Memphis, TN, 1987, AAR, Chicago, IL, 1993.
59. P. Clayton, D. Danks and R.K. Steele, Laboratory assessment of lubricants for wheel/rail applications, Lubr. Eng., 45 (1989) 501-506.
60. R.R. Reiff, Field evaluation of lubricant performance at FAST, Proc. Symp. on Rail and Wheel Lubrication, Memphis, TN, 1987, AAR, Chicago, IL, 1993.
61. M. Sato, K. Sugino, K. Tanikawa and H. Iida, The nature of lubricants and their influence on the wear and fatigue behavior of rail, Proc. Symp. on Rail and Wheel Lubrication, Memphis, TN, 1987, AAR, Chicago, IL, 1993.
62. P. Clayton, R.R. Reiff and R.K. Steele, Wheel/rail lubricant performance: FAST in-track and laboratory test comparisons, AAR Research and Test Dept Rep. R-695, September 1988; Proc. 4th Int. Heavy Haul Railway Conf., Brisbane, 1989, pp. 557-561.
63. I.J. McEwen and R.F. Harvey, Wheel/rail wear and lubrication -laboratory studies and their relevance to field situations, in G.M. Gladwell, H. Ghonem and J. Kalousek (eds.), Contact Mechanics and Wear of Wheel Rail Systems II, University of Waterloo Press, 1987.
64. R. Devanathan and P. Clayton, AAR Lubrication Study Reports, Jan 1992 and Feb 1993, OGI.
65. A.H. Collins and C. Pritchard, Recent research on adhesion, Railway Eng. J., 1 (1972) 19-34.
66. M. Broster, C. Pritchard and D.A. Smith, Wheel/rail adhesion: its relation to rail contamination, Wear, 29 (1974) 309-321.
67. D.J. Watkins, Exploring adhesion with British Rail's tribometer train, Railway Eng. J., 4 (1975) 6-13.
68. T.M. Beagley, I.J. McEwen and C. Pritchard, Wheel/rail adhesion -boundary lubrication by oily fluids, Wear, 31 (1975) 77-88.
69. T.M. Beagley, I.J. McEwen and C. Pritchard, Wheel/rail adhesion -the influence of railhead debris, Wear, 33 (1975) 141-152.
70. T.M. Beagley and C. Pritchard, Wheel/rail adhesion - the overriding influence of water, Wear, 35 (1975) 299-313.
71. C. Pritchard, Traction between rolling steel surfaces: a survey of railway and laboratory experiments, Proc. 7th Leeds-Lyon Symp. on Tribology, MEP, 1980.
72. D.J. Dobbs, Evaluation of the plasma torch, Federal Railroad Administration Rep. FRA-RT-70-27, January 1970.
73. F.G.R. Zobel, Development of remedies for poor adhesion, Railway Eng. J., 4 (1975) 14-27.
74. F.T. Harwell, Wheel to rail adhesion, Contact Mechanics and Wear of Wheel/Rail Systems, in J. Kalousek, R.V. Dukkipati and G.M.L. Gladwell, Contact Mechanics and Wear of Wheel Rail Systems, University of Waterloo Press, 1983, pp. 503-521.
75. C.A. Swenson, Wheel wear on high adhesion locomotives, Proc. 2nd Int. Heavy Haul Railway Conf., Colorado Springs, CO, 1982, pp. 690-698.
76. R.T. Scott and H.S. Lamba, High adhesion locomotives - historical perspectives and future challenges, Joint ASME/AREA Railroad Conf., Jacksonville, Oct 24, 1990.
77. P. Clayton, Tribological behavior of a titanium-nickel alloy, Wear, 162-164 (1993) 202-210.
78. D. McMurchie, unpublished Ph.D. work, OGI, 1994.
79. R. Deroche, J.P. Bettembourg, B. Prasil, J.P. Bertrand and C. Juckum, Rolling contact fatigue cracks on SNCF conventional tracks, in J.J. Kalker (ed.), Rail Quality and Maintenance for Modern Railway Operation, Kluwer, Dordrecht, 1993, pp. 435-448.
80. R. Nakumura, S. Owaku and N. Enomoto, The rail shelly crack in Japan, Q. Rep. Railway Tech. Res. Inst. Jpn. National Railways, 6 (3) (1965) 34-44.
81. A. Ito and R. Kurihara, Shelling of rails experienced in Japanese railways, Bull. Permanent Way Soc. Jpn., 13 (1 and 8) (1965) 17-32.
82. H. Masumoto, K. Sugino, S. Nisida, R. Kurihara and S. Matsuyama, Some features and metallurgical considerations of surface defects in rail due to contact fatigue, in D.H. Stone and G.G. Knupp (eds.), Rail Steels - Developments, Processing and Use, ASTM STP 644, American Society for Testing and Materials, Philadelphia, PA, 1978, pp. 233-255.
83. K.L. Johnson, The mechanics of plastic deformation of surface and sub-surface layers in rolling and sliding contact, in R. Solecki (ed.), Role of Subsurface Zones in the Wear of Materials, Trans Tech, Switzerland, 1988.
84. A.F. Bower, The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks, J. Lubr. Technol., 110 (1988) 704-711.
85. S.D. O'Regan, G.T. Hahn and C.A. Rubin, The driving force for Mode II crack growth under rolling contact, Wear, 101 (1985) 333-346.
86. M. Olzak, J. Stupnicki and R. Wojcik, Investigation of crack propagation during contact by a finite element method, Wear, 146 (1991) 229-240.
87. V. Dikshit, P. Clayton and D.E. Christensen, Investigation of rolling contact fatigue in a head hardened rail, Wear, 144 (1991) 89-102.
88. J. Kalousek and A. E. Bethune, Rail wear under heavy traffic conditions, in D.H. Stone and G.G. Knupp (eds.), Rail Steels - Development, Processing and Use, ASTM STP 644, American Society for Testing and Materials, Philadelphia, PA, 1978, pp. 63-79.
89. S. Way, Pitting due to rolling contact, Trans. ASME, J. Appl. Mech., 57 (1935) A49-A58.
90. H. Ollerton and J.W.W. Morey, Fatigue strength of rail steel in rolling contact, Proc. Inst. Mech. Eng. Symp. on Fatigue in Rolling Contact, March 28, 1963.
91. P. Clayton and D.N. Hill, Rolling contact fatigue of a rail steel, Wear, 117 (1987) 319-334.
92. L.M. Keer and M.D. Bryant, Trans. ASME, J. Lubr. Technol., 105 (1983) 198.
93. V. Dikshit, Rolling contact fatigue behavior of pearlitic rail steels, Ph.D. Thesis, Oregon Graduate Institute, 1992.
94. ERRI Question D173, Rolling Contact Fatigue, Rep. 5, European Railway Research Institute, Utrecht, Netherlands, 1993.
95. M. Sato, Wear and rolling contact fatigue of rail steels, M.S. Thesis, Ohio State University, 1991.
96. V. Dikshit and P. Clayton, A simple material model for water lubricated rolling contact fatigue of eutectoid steels, Lubr. Eng., 48 (1992) 606-614.
97. H. Ghonem and J. Kalousek, Surface crack initiation due to biaxial compression/shear loading, in G.M. Gladwell, H. Ghonem and J. Kalousek (eds.), Contact Mechanics and Wear of Wheel Rail Systems II, University of Waterloo Press, 1987.
98. K.L. Johnson, Plastic flow, residual stress and shakedown in rolling contact, in G.M. Gladwell, H. Ghonem and J. Kalousek (eds.), Contact Mechanics and Wear of Wheel Rail Systems II, University of Waterloo Press, 1987.
99. A.F. Bower, Cyclic hardening properties of hard drawn copper and rail steel, J. Mech. Phys. Solids, 37 (1989) 455-470.
100. A.F. Bower and K.L. Johnson, Plastic flow and shakedown of the rail surface in repeated wheel/rail contact, Wear, 144 (1991) 1-18.
101. D.L. McDowell and G.J. Moyar, A more realistic model of nonlinear material response: application to elastic-plastic rolling contact, in G.M. Gladwell, H. Ghonem and J. Kalousek (eds.), Contact Mechanics and Wear of Wheel Rail Systems II, University of Waterloo Press, 1987.
102. V. Bhargava, G.T. Hahn and C.A. Rubin, An elastic-plastic finite element model of rolling contact, ASME J. Appl. Mech., 52 (1985) 67-74.
103. V. Bhargava, G.T. Hahn and C.A. Rubin, An elastic-plastic finite element model of rolling contact. Part II: Analysis of repeated contacts, ASME J. Appl. Mech., 52 (1985) 75-82
104. V. Bhargava, G.T. Hahn, G. Ham, S. Kulkarni and C.A. Rubin, Influence of kinematic hardening on rolling contact deformation, in G.M. Gladwell, H. Ghonem and J. Kalousek (eds.), Contact Mechanics and Wear of Wheel Rail Systems II, University of Waterloo Press, 1987.
105. S.J. Wineman and F.A. McLintock, Rail web fracture in the presence of residual stresses, Theor. Appl. Fracture Mech., 9 (1987) 87-99.
106. R.K. Steele, M.W. Joerms, D. Utrata and G.F. Carpenter, Catastrophic web cracking of railroad rail, in O. Orringer et al. (eds.), Residual Stresses in Rails, Vol. 1, Kluwer, Dordrecht, 1992, pp. 1-20.
107. J.O. Igwemezie, S.L. Kennedy and N.C. Gore, Residual stresses and catastrophic rail failure, in J.J. Kalker et al., (eds.), Rail Quality and Maintenance for Modern Railway Operation, Kluwer, Dordrecht, 1993, pp. 325-336.
108. O. Orringer, Rail testing strategies for safe and economical rail quality assurance, Transportation Research Record 1174, Transportation Research Board, Washington, DC, 1988, pp. 28-42.
109. D.H. Skinner and P.A. Judd, A metallographic study of fatigue defects in rails, Proc. 34th Australian Inst. Metals Conf., Queensland, 1981, Iron and Steel Society, Warrendale, PA.
110. P. Clayton and G. Brave, Fatigue origination and growth experiment, Rep. FRA/ORD-91/18, US Dept. of Transportation, 1991.
111. R.C. Rice, R. Rungta and D. Broek, Post-service rail defect analysis, Battelle Columbus Laboratories Third Interim Rep., US Dept. of Transportation, July 1983.
112. S. Marich, J.W. Cottam and P. Curcio, Laboratory investigation of transverse defects in rails, 1st Int. Heavy Haul Railway Conf., Perth, 1978, Institute of Engineers of Australia.
113. D.E. Sonon, J.V. Pellegrino and J.M. Wandrisco, A metallurgical examination of control cooled, carbon-steel rails with service developed defects, in D.H. Stone and G.G. Knupp (eds.), Rail Steels-Developments, Processing and Use, ASTM STP 644, American Society for Testing and Materials, Philadelphia, PA, 1978, pp. 99-117.
114. K. Sugino, H. Kageyama and H.W. Newell, Detection method for harmful inclusions in rail steel, AREA Bull. 716 (89) (1988) 230-259.
115. P.J. Mutton, C.J. Epp and J. Dudek, Rolling contact fatigue in railway wheels under high axle loads, Wear, 144 (1991) 139-152.
116. G.F. Carpenter, R.K. Steele and M.J. Markese, Effect of inclusion content on the fatigue performance of rail steels, Proc. Int. Symp. Rail Steels - Developments, Manufacturing and Performance, Iron and Steel Society, 1993, pp. 49-56.
117. J. Hannifious and P. Clayton, The effects of rail grinding on rail fatigue at FAST, to be presented to the symposium, Rail Steels for the 21st Century, AIME ISS Mech Working and Steel Proc. Conf., Baltimore, Oct 1994.
118. A.D. Hearle and K.L. Johnson, Mode II stress intensity factors for a crack parallel to the surface of an elastic half-space subjected to a moving point load, J. Mech. Phys. Solids, 33 (1980) 61-81.
119. S. Sheppard, J.R. Barber and M. Comninou, Short subsurface cracks under conditions of slip and stick caused by a moving compressive load, J. Appl. Mech., 52 (1985) 811-817.
120. S. Sheppard, J.R. Barber and M. Comninou, Subsurface cracks under conditions of slip, stick and separation caused by a moving compressive load, J. Appl. Mech., 54 (1987).
121. S. Sheppard and M. Cominou, The mechanics of surface fatigue failure, in G.M. Gladwell, H. Ghonem and J. Kalousek (eds.), Contact Mechanics and Wear of Wheel Rail Systems II, University of Waterloo Press, 1987.
122. L. Keer, T.N. Farris and R.K. Steele, On some aspects of fatigue crack growth in rails induced by wheel/rail contact loadings, Proc. 2nd Int. Symp. on Contact Mechanics and Wear of Wheel Rail Systems, University of Rhode Island, University of Waterloo Press, 1986, pp. 327-338.
123. T.N. Farris, L.M. Keer and R.K. Steele, Life prediction for unstable shell growth in rails, J. Eng. Ind., 112 (1990) 175-180.
124. O. Orringer, Y.H. Tang, J.E. Gordon, D.Y. Jeong, J.M. Morris and B.J. Perlman, Crack propagation life of detail fractures in rails, Rep. DOT/FRA/ORD-88/13, US Dept. of Transportation, October 1988.
125. P. Clayton and Y.H. Tang, Detail fracture growth rates in curved track at the Facility for Accelerated Service Testing, in O. Orringer et al. (eds.), Residual Stresses in Rails, Kluwer, Dordrecht, 1992, Vol. 1, pp. 37-56.
126. K. Ludema, Third bodies in wear models, in D. Dowson et al. (eds.), Wear Particles, 1992 Elsevier, Amsterdam, pp. 155-160.
127. D. Lyon and R.J. Weeks, The design of bogies for low wear of wheel and rail in rapid transit applications, in J. Kalousek, R.V. Dukkipati and G.M.L. Gladwell, Contact Mechanics and Wear of Wheel Rail Systems, University of Waterloo Press, 1983, pp. 465-485.
128. H.P. Lieurade, R.Y. Deroche, B. Derboule and R. Conti, A study of the shelling mechanism of rails, in G.M. Gladwell, H. Ghonem and J. Kalousek (eds.), Contact Mechanics and Wear of Wheel Rail Systems II, University of Waterloo Press, 1987.
129. B. Leis, Cyclic inelastic deformation and fatigue resistance characteristics of a rail steel, in D.H. Stone and G.G. Knupp (eds.), Rail Steels - Developments, Processing and Use, ASTM STP 644, American Society for Testing and Materials, Philadelphia, PA, 1978, pp. 449-468.
130. B.J. Dabell, S.J. Hill and P. Watson, An evaluation of the fatigue performance of conventional British rail steels, in D.H. Stone and G.G. Knupp (eds.), Rail Steels - Developments, Processing and Use, ASTM STP 644, American Society for Testing and Materials, Philadelphia, PA, 1978, pp. 430-448.
131. G.J. Moyar and G.M. Sinclair, Cumulative plastic damage deformation in rolling contact, ASME Trans., J. Basic Eng., (March 1963) 105-112.
132. A.B. Sadat and M.Y. Reddy, Plastic strain analysis of the machined surface region using fine grid etched by photoresist technique, Exp. Mech. 29 (March 1989) 346-349.
133. J.H. Dautzenburg and J.H. Zaat, Quantitative determination of deformation by sliding wear, Wear, 23 (1973) 9-20.
134. G. Augustsson, Strain field near the surface due to surface traction, S.M. Thesis, MIT, 1974.
135. C.J. Code, Report on Pennsylvania railroad maintenance of way test No. 591: determination of plastic flow in rail heads, AREA Proc., 59 (1958) 962-975.
136. D.L. McDowell and G.J. Moyar, Effects of non-linear kinematic hardening on plastic deformation and residual stresses in rolling line contact, Wear, 144 (1991) 19-37.
137. H. Sehitoglu and Y.R. Chiang, Residual stress analysis in rolling contact, in J.J. Kalker (eds.), Rail Quality and Maintenance for Modern Railway Operation, Kluwer, Dordrecht, 1993, pp. 349-360.
138. H. Li and P. Clayton, A statistical analysis of the oxide content of rail steel, to be presented to the symposium, Rail Steels for the 21st Century, AIME ISS Mech Working and Steel Proc. Conf., Baltimore, Oct 1994.
139. J.M. Hampshire, J.V. Nash and G.E. Hollox, Materials evaluation by flat washer testing, in J.J. Hoo (ed.), Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, American Society for Testing and Materials, Philadelphia, PA, 1982, pp. 46-66.
140. K.L. Day, Unisteel testing of aircraft engine bearing steels, in J.J. Hoo (ed.), Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, American Society for Testing and Materials, Philadelphia, PA, 1982, pp. 67-84.
141. D. Jeong, O. Orringer, A.B. Perlman and R.C. Rice, Beam theory prediction of shell nucleation life, in G.M. Gladwell, H. Ghonem and J. Kalousek (eds.), Contact Mechanics and Wear of Wheel Rail Systems II, University of Waterloo Press, 1987.
142. R.K. Steele and M.W. Joerms, A fatigue analysis of the effects of wheel load on rail life, AAR Research and Test Rep. R-689, AAR, Chicago, IL, Sept. 1988.
143. Anon, Railway Age, (Sept 1993) 96-97.
144. H. Li, unpublished Ph.D. Thesis work, OGI 1994.
145. A.C. Peters and K.C. Rownd, Wheel/rail lubrication research, AREA Bull. 709 (88) (1987) 99-118.
146. J.A. Elkins, Rail Rollover Mechanism, November 1991 (AAR video).