Development of Gas Sensors for Environmental Protection

IEEE Transactions on Components Packaging and Manufacturing Technology Part A

Volumn 18, Issue 2, 1995, Pages 252-256

  Yamazoe, Noboru ^a   Miura, Norio ^a  

^a KYUSHU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; ELECTRODES; ELECTROLYTES; ENVIRONMENTAL PROTECTION; GASES; IONS; POTENTIOMETRIC SENSORS; SEMICONDUCTOR MATERIALS;

CERAMIC SENSORS; OXYGENIC GASES; SEMICONDUCTING OXIDES; SOLID ELECTROLYTE SENSORS;

ELECTROCHEMICAL SENSORS;

EID: 0029322565     PISSN: 10709886     EISSN: None     Source Type: Journal    
DOI: 10.1109/95.390298     Document Type: Article

References (40)

1. T. Takeuchi, “Sensing of substances related with global environment by chemical sensors,” in Proc. Fukuoka Int. Symp., 1990, pp. 327-333.
2. W. Weppner, “Solid state electrochemical gas sensors,” in Proc. 2nd Int. Meeting on Chemical Sensors, 1986, pp. 59-68.
3. J. S. Lundsgaard, J. Malling, and M. L. S. Birchall, “A novel hydrogen gas sensor based on hydrogen uranyl phosphate,” Solid State Ionics, vol. 7, pp. 53-56, 1982.
4. N. Miura and N. Yamazoe, “Development of new sensors based on low-temperature proton conductors,” Solid State Ionics, vol. 53-56, pp. 975-982, 1992.
5. K. T. Jacob and D. B. Rao, “A solid-state probe for SO2/SO3based on Na2SO4-I electrolyte,” J. J. Electrochem. Soc., vol. 126, pp. 1842-1847, 1979.
6. W. L. Worrell, “Solid-electrolyte sensors for SO2and/or SO3,” Chem. Sensor Technol., vol. 1, pp. 97-108, 1988.
7. M. Gauthier and A. Chamberland, “Solid state detectors for the potentiometric determination of gaseous oxides,” J. Electrochem. Soc., vol. 124, pp. 1579-1583, 1977.
8. R. Cöté, C. W. Bale, and M. Gauthier, “K2CO3solid electrolyte as a CO2probe: Decomposition measurements of CaCO3,” J. Electrochem. Soc., vol. 131, pp. 63-67, 1984.
9. A. Pelloux, P. Fabry, and P. Durante, “Design and testing of a potentiometric chlorine gauge,” Sensors and Actuators, vol. 7, pp. 245-252, 1985.
10. R. Akila and K. T. Jacob, “An SOx(x = 2, 3) sensor using β-alumina/Na2SO4couple,” Sensors and Actuators, vol. 16, pp. 311-323, 1989.
11. Y. Shimizu, Y. Okamoto, S. Yao, N. Miura, and N. Yamazoe, “Solid electrolyte NO2sensors fitted with sodium nitrate and/or barium nitrate electrodes,” Denki Kagaku, vol. 59, pp. 465-472, 1991.
12. S. Yao, Y. Shimizu, N. Miura, and N. Yamazoe, “Use of sodium nitrite auxiliary electrode for solid electrolyte sensor to detect nitrogen oxides,” Chem. Lett., vol. 1992, pp. 587-590, 1992.
13. T. Maruyama, S. Sasaki, and Y. Saito, “Potentiometric gas sensor for carbon dioxide using solid electrolytes,” Solid State Ionics, vol. 23, pp. 107-112, 1987.
14. N. Imanaka, T. Kawasato, and G. Adachi, “A carbon dioxide gas sensor probe based on a lithium ionic conductor,” Chem. Lett., vol. 1990, pp. 497-500, 1990.
15. N. Miura, J. Hisamoto, N. Yamazoe, S. Kuwata, and J. Salardenne, “Solid-state oxygen sensor using sputtered LaF3film,” Sensors and Actuators, vol. 16, pp. 301-310, 1989.
16. S. Yao, S. Hosohara, Y. Shimizu, N. Miura, H. Hutata, and N. Yamazoe, “Solid electrolyte CO2sensor using NASICON and Li-based binary carbonate electrode,” Chem. Lett., vol. 1991, pp. 2069-2072, 1991.
17. N. Miura, S. Yao, Y. Shimizu, and N. Yamazoe, “Development of highperformance solid-electrolyte sensors for NO and NO2, “ Sensors and Actuators B, vol. 13-14, pp. 387-390, 1993.
18. Y. Yan, Y. Shimizu, N. Miura, and N. Yamazoe, “Solid-state sensor for sulfur oxides based on stabilized zirconia and metal sulphate,” Chem. Lett., vol. 1992, pp. 635-638, 1992.
19. N. Miura, Y. Yan, M. Sato, S. Yao, Y. Shimizu, and N. Yamazoe, “Stabilized zirconia-based CO2sensors combined with carbonate auxiliary phase,” Chem. Lett., vol. 1994, pp. 393-396, 1994.
20. H. Kurosawa, Y. Yan, N. Miura and N. Yamazoe, “Stabilized zirconia-based potentiometric sensor for nitrogen oxides,” Chem. Lett., vol. 1994, pp. 1733-1736, 1994.
21. N. Miura, S. Yao, M. Sato, Y. Shimizu, S. Kuwata, and N. Yamazoe, “Carbon dioxide sensor using combination of fluoride ion conductor and metal carbonate,” Chem. Lett., vol. 1993, pp. 1973-1976, 1993.
22. M. Kleitz and E. Siebert, “Electrode reactions in potentiometric gas sensor,” Chemical Sensor Technol., vol. 2, pp. 151-171, 1989.
23. N. Yamazoe and N. Miura, “Some basic aspects of semiconductor gas sensors,” Chem. Sensor Technol., vol. 4, pp. 19-42, 1992.
24. T. Ishihara, K. Kometani, M. Hashida, and Y. Takita, “Application of mixed oxide capacitor to the selective carbon dioxide sensor,” J. Electrochem. Soc., vol. 138, pp. 173-176, 1991.
25. S. Yao, Y. Shimizu, N. Miura, and N. Yamazoe, “Solid electrolyte CO2sensor using binary carbonate electrode,” Chem. Lett., vol. 1990, pp. 2033-2036, 1990.
26. N. Miura, S. Yao, Y. Shimizu, and N. Yamazoe, “Carbon dioxide sensor using sodium ion conductor and binary carbonate auxiliary electrode,” J. Electrochem. Soc., vol. 139, pp. 1384-1388, 1992.
27. S. Yao, Y. Shimizu, N. Miura, and N. Yamazoe, “Solid electrolyte carbon dioxide sensor using sodium-ion conductor and Li2CO3-BaCO3 electrode,” Jpn. J. Appl. Phys., vol. 31, pp. L197-L199, 1992.
28. K. Satake, A. Kobayashi, T. Inoue, T. Nakahara, and T. Takeuchi, “NOxsensors for exhaust monitoring,” in Proc. 3rd Int. Meeting Chemical Sensors, 1990, pp. 334-337.
29. N. Miura, S. Yao, Y. Shimizu, and N. Yamazoe, “New auxiliary sensing materials for solid electrolyte NO2 sensors,” Solid State Ionics, vol. 70/71, pp. 572-577, 1994.
30. M. Akiyama, J. Tamaki, N. Miura, and N. Yamazoe, “Tungsten oxide-based semiconductor sensor highly sensitive to NO and NO2,” Chem. Lett., vol. 1991, pp. 1611-1614, 1991.
31. Y. Saito, T. Maruyama, Y. Matsumoto, K. Kobayashi, and Y. Yano, “Applicability of sodium sulfate as a solid electrolyte for a sulfur oxides sensor,” Solid State Ionics, vol. 14, pp. 273-281, 1984.
32. Y. Yan, Y. Shimizu, N. Miura, and N. Yamazoe, “High-performance solid electrolyte SOxsensor using MgO-stabilized zirconia tube and Li2SO4-CaSO4-SiO2auxiliary phase,” Sensors and Actuators B, vol. 20, pp. 81-87, 1994.
33. 2 sensor,” J. Electrochem. Soc., vol. 135, pp. 2539-2540, 1988.
34. Y. Takao, Y. Shimizu, M. Egashira, E. Ohashi, and A. Ozawa, “Detection of freshness of squid by metal oxide semiconductor gas sensors,” in Dig. 11th Chemical Sensor Symp., 1990, pp. 25-28.
35. T. Nomura, Y. Matsuura, K. Takahata, and S. Matsuura, “Development of semiconductor freon gas sensor,” in Dig. 11th Chemical Sensor Symp., 1989, pp. 13-16.
36. H. Nanto, U. Minami, and S. Takada, “Ammonia gas sensor,” Japanese Patent 62-2147, pp. 299-304, 1987.
37. T. Maekawa, J. Tamaki, N. Miura, and N. Yamazoe, “Gold-loaded tungsten oxide sensor for detection of ammonia in air,” Chem. Lett., vol. 1992, pp. 639-642, 1992.
38. T. Maekawa, J. Tamaki, N. Miura, and N. Yamazoe, “Sensing behavior of CuO-loaded SnO2 element for H2S detection,” Chem. Lett., vol. 1991, pp. 575-578, 1991.
39. T. Nakahara, K. Takahata, and S. Matsuura, “High sensitive SnO2 gas sensor I detection of volatile sulfides,” in Proc. Symp. Chemical Sensors, 1987, pp. 55-64.
40. T. Takada and K. Komatsu, “O3gas sensor of thin film semiconductor In2O3,” in Dig. Tech. Papers of Transducers, 1987, pp. 693-696.