Environmental degradation of zirconia ceramics

Journal of the European Ceramic Society

Volumn 15, Issue 6, 1995, Pages 485-502

  Lawson, Simon ^a  

^a UNIVERSITY OF SUNDERLAND   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

AGING OF MATERIALS; BENDING STRENGTH; CERAMIC MATERIALS; CRACK PROPAGATION; DEGRADATION; FRACTURE TOUGHNESS; GRAIN SIZE AND SHAPE; MECHANICAL PROPERTIES; PHASE TRANSITIONS; THERMAL CYCLING;

HYDROTHERMAL CORROSION; METASTABLE TETRAGONAL CRYSTALS; TETRAGONAL MONOCLINIC PHASE TRANSFORMATION; TRANSFORMATION KINETICS;

ZIRCONIA;

EID: 0029237462     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/0955-2219(95)00035-S     Document Type: Review

References (114)

1. Transformations on the surface of steam treated TSZ-ceramics
2. 3 solid electrolyte after ageing
3. Corrosion of silicon nitride ceramics under hydrothermal conditions
4. Ageing behaviour of Y-TZP
5. Strength Recovery in Degraded Yttria-Doped Tetragonal Zirconia Polycrystals
6. Surface toughening of TZP ceramics by low temperature ageing
7. Surface transformation and toughening of TZP ceramics by low temperature ageing
8. Phase stability of zirconia
9. 3-stabilized tetragonal zirconia polycrystals
10. Tetragonal to monoclinic phase transformation during thermal cycling and isothermal ageing in yttria-partially stabilized zirconia
11. The ageing behaviour of ultrafine-grained Y-TZP in hot water
12. Significance of internal stresses for the martensitic transformation in yttria-stabilized tetragonal zirconia polycrystals during degradation
13. Low temperature degradation of tetragonal zirconia: mechanism and prevention
14. Investigations on the stability of yttria stabilized tetragonal zirconia (Y-TZP)
15. Microstructural investigations on the stability of yttria-stabilized tetragonal zirconia
16. Influence of an amorphous second phase on the properties of yttria-stabilized tetragonal zirconia polycrystals (Y-TZP)
17. Transition-free zirconia ceramics
18. Hexagonal beta-SiC Particles
19. 2 polycrystals by annealing in water
20. 2O on the degradation process of Y-TZP
21. Phase stability of Y-PSZ in aqueous solutions
22. The sintering, mechanical and ageing properties of transition metal oxide-doped yttria-tetragonal zirconia polycrystals (Y-TZP)
23. Ageing studies of novel Y-TZPs
24. Biocompatability of magnesia-partially stabilized zirconia (Mg-PSZ) ceramics
25. Stability of Mg-PSZ in high temperature steam environment
26. Hydrothermal corrosion of magnesia-partially-stabilized zirconia
27. Environmental effects on toughened zirconia ceramics
28. The effect of low temperature aqueous environments on magnesia-partially-stabilized zirconia (Mg-PSZ)
29. Transformation of Ceria-doped tetragonal zirconia polycrystals by annealing in water
30. Stability of zirconia-ceria-yttria ceramics in hostile environments
31. 2 containing tetragonal zirconia polycrystals
32. Aging Behavior of Ceria-Stabilized Tetragonal Zirconia Polycrystals
33. The obtainment and properties of calcia-TZP
34. 2 polycrystals (Y-TZP)
35. Enhanced performance of Y-TZP materials through compositional zonng on a nano-scale
36. Kinetic and thermodynamical investigations on ready to press Y-TZP powders for biomedical applications
37. Hydrothermal degradation of cubic yttria zirconia ceramics
38. The superior ageing properties of a plasma synthesized yttria coated zirconia
39. Evaluation of Japanese yttria tetragonal zirconia polycrystal (Y-TZP) materials
40. Low temperature degradation of Y-TZP materials
41. Characterization studies of transformation-toughened ceramics
42. Review of low temperature degradation in Y-TZPs
43. 3 materials at 250 °C
44. Mechanical properties of Y-PSZ after ageing at low temperature
45. Failure of fracture toughness of partially
46. Transformation of yttria partially stabilized zirconia by low temperature annealing in air
47. 2 polycrystals by annealing under controlled humidity conditions
48. Structural and mechanical changes of zirconia and zirconia composites after aging
49. 3 in air and water
50. Humidity dependence of phase transformation from tetragonalmonoclinic structure in yttria-doped tetragonal zirconia
51. The effects of high-temperature-and high-pressure-water on the low temperature degradation behaviour of Y-TZP
52. 3 ceramics
53. In vitro ageing of yttria-stabilized zirconia
54. Effects of In Vitro Aging of Magnesia-Stabilized Zirconia
55. Mechanical behaviour of zirconia and zirconia-toughened alumina in a simulated body environment
56. Low amplitude oscillatory wear of Y-TZP in various environments
57. Low amplitude oscillatory wear in yttria-stabilized zirconia
58. Environmental degradation of zirconia ceramics, Part II: Ageing mechanism
59. Deterioration of partially stabilized zirconia (II)
60. The monitoring and prediction of the ageing-induced phase transformations occurring in zirconia ceramics using a microwave dielectric loss tangent technique
61. Martensite transformation behaviour during isothermal ageing in partially stabilized zirconia with and without alumina addition
62. Time-dependent tetragonal to monoclinic transition in hot-pressed zirconia stabilized with 2 mol% yttria
63. Behaviour of the tetragonal to monoclinic transition in hot pressed zirconia doped with 2 mol% yttria
64. x-doped Y-TZP (M:Cu, Mn, Co, Ni, Zn)
65. 3
66. 3-TZP and its fracture after ageing treatment
67. 3-TZP
68. 2
69. A model for the structural degradation of Y-TZP ceramics in humid atmosphere
70. Phase transformations in Y-TZP-ceramics in boiling water
71. TZP-ceramics in humid conditions at 150 °C
72. A new technique for monitoring aging in yttria-tetragonal zirconia polycrystals
73. A Molecular Mechanism for Stress Corrosion in Vitreous Silica
74. 2
75. Stabilization of the tetragonal phase in zirconia polycrystals
76. Effect of cooling rate on the properties and the nanostructures of Y-TZP
77. EPR structural study on hydrothermally aged yttria-doped tetragonal zirconia polycrystals
78. 2O-aged TZP by elastic recoil detection analysis (ERDA)
79. Nanostructured, tetragonal zirconia ceramics: microstructure, sinter forging and superplasticity
80. Degradation of Y-TZP in moist environments
81. Subeutectoid Degradation of Yttria-Stabilized Tetragonal Zirconia Polycrystal and Ceria-Doped Yttria-Stabilized Tetragonal Zirconia Polycrystal Ceramics
82. 3-containing tetragonal zirconia polycrystals
83. Thermal stability and microstructure of Y-TZP
84. Temperature dependence of Young's modulus and internal friction in alumina, silicon nitride, and partially stabilized zirconia ceramics
85. 3 (Y-TZP)
86. 2 composites
87. 4 and SiC
88. Effect of environmental gas on tetragonal-to-monoclinic transformations in Y-TZP
89. Microstructural design of zirconia-toughened ceramics (ZTA)
90. Stress-induced transformation during subcritical crack growth in partially stabilized zirconia
91. 2 particles in ceramic matrices
92. Transformation toughening, Part 1, Size effects associated with the thermodynamics of constrained transformation
93. Control of the tetragonal-to-monoclinic phase transformation of yttria partially stabilized zirconia in hot water
94. Improvement of thermal stability of yttria-doped tetragonal zirconia polycrystals by alloying with various oxides
95. Improvement to the thermal stability of yttria-doped tetragonal zirconia polycrystals by alloying with various oxides
96. 2 ceramics
97. 2-doped tetragonal zirconia ceramics
98. 2 ceramic system
99. Hydrothermal stability of yttria- and ceria-doped tetragonal zirconia-alumina composites
100. Effect of dopants on the sintering behaviour and stability of tetragonal zirconia ceramics
101. Preparation, microstructural control and superplasticity of nanostructured yttria/ceria stabilized tetragonal zirconia ceramics
102. Microstructure, fracture toughness and strength of (ultra) fine-grained tetragonal zirconia ceramics
103. 3 composites
104. Design of transformation-toughened ceramics
105. Transformation toughening
106. Stability under hydrothermal conditions and fracture strength of Y-TZP/spinelalumina and Y-TZP/mullite-alumina composites
107. Microstructure and thermal stability of fine-grained (Y.Mg)-PSZ ceramics with alumina additions
108. The effects of copper and iron oxide additions on the sintering and properties of Y-TZP
109. Tetragonal-to-monoclinic transformation in Y-TZP during low-temperature ageing, and its restraint by coating
110. Prevention of low-temperature surface transformation by surface recrystallization in yttria-doped tetragonal zirconia
111. Low-Temperature Aging of t'-Zirconia: The Role of Microstructure on Phase Stability
112. Monoclinic-to-tetragonal transformation and crack healing by annealing in aged 2Y-TZP ceramics