Relationship of endurance to microstructure of IBAD MoS2coatings

Tribology Transactions

Volumn 38, Issue 2, 1995, Pages 445-451

  Seitzman, L E ^a   Bolster, R N ^a   Singer, I L ^a   Wegand, J C ^b  

^a NAVAL RESEARCH LABORATORY   (United States)

^b SCIENCE APPLICATIONS INTERNATIONAL CORPORATION   (United States)

Author keywords

And Failure; Molybdenum Disulfide; Solid Lubricants; Surface Coatings; Wear; XRD

Indexed keywords

LUBRICANTS-SOLID; MICROSTRUCTURES; MOLYBDENUM DISULPHIDE; WEAR;

EID: 0029168423     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402009508983427     Document Type: Article

References (38)

1. Dickinson, R. G. and Pauling L., “The Crystal Structure of Molybdenite,” J. Amer. Chem..Sor., 45, pp 1466-1471, (1923)
2. Bowden, F. P. and Tabor, D., The Friction and Lubrication of Solids, Part II, Oxford University Press, London, pp 196-199, (1964)
3. Bhushan, B. and Gupta, B. K., Handbook of Tribology, McGraw Hill, Inc., New York, p 13.12, (1991)
4. Fusaro, R. L., “Effect of Substrate Surface. Finish on the Lubrication and Failure Mechanisms of Molybdenum Disulfide Films,” ASLE Trans., 25, 2, pp 141-156, (1981)
5. Roberts, E. W. and Price, W. B., “In-Vacuo, Tribological Properties of ‘High-Rate’ Sputtered MoS¿ Applied to Metal and Ceramic Substrates,” in New Materials Afiproaches to Tribology: Theory and Applications, Pope, L. E., Fchrenbacher, L. L. and Winer W. O., eds., Materials Research Society, Pittsburgh, PA, 140, pp 251-264, (1989)
6. Haltner, A. J. and Oliver, C. S., “Effect of Water Vapor on the Friction of Molybdenum Disulfide,” I&EC Fundamentals, 5, 3, pp 348-355, (1966)
7. Salomon, G., Dc Gee, A. W. J. and Zaat, J. H., “Mechano-Chemical Factors in MoS2-Film Lubrication,” Wear, 7, pp 87-101, (1964)
8. Spalvins, T., “A Review of Recent Advances in Solid Film Lubrication,” J. Vac. Sci. Technol. A, 5, 2, pp 212-219, (1987)
9. Müller, C., Menoud, C., Maillat, M. and Hintermann, H. E., “Thick Compact MoS2 Coatings,” Surf Omt. Tech., 36, pp 351-359, (1988)
10. Kobs, K., Dimigen, H., Hübsch, H., Tolle, H. J., Leutenccker, R. and Ryssel, H., “Enhanced Endurance Life of Sputtered MoSx Films on Steel by Ion Beam Mixing,” Mater. Sci. Fug., 90, pp 281-286, (1987)
11. Stupp, B. C., “Synergistic Effects of Metals Co-Sputtered with MoS2,” Thin Solid Films, 84, pp 257-266, (1981)
12. Buck, V., “Preparation and Properties of Different Types of Sputtered MoS2 Films,” Wear, 114, pp 263-274, (1987)
13. Niederháuser, P., Hintermann, H. E. and Maillat, M., “Moisture-Resistant MoS2-Based Composite Lubricant Films,” Thin Solid Films, 108, pp 209-218. (1983)
14. Fleischauer, P. D. and Bauer, R., “Chemical and Structural Effects on the Lubrication Properties of Sputtered MoSx Films,” Tribo. Trans., 31, 2, pp 239-250, (1988)
15. Mikkelsen, N. J., Chevallier, J., Sdrcnsen, G. and Straedc, C. A., “Friction and Wear Measurements of Sputtered MoSx Films Amorphized by Ion Bombardment,” Appl. Phys. Lett., 52, 14, pp 1130-1132, (1988)
16. Mikkelsen, N. J. and Sorensen, G., “Solid Lubricating Films Produced by Ion Bombardment of Sputter Deposited MoSx Films,” Surf. Coat. Tech., 51, pp 118-123, (1992)
17. Hilton, M. R., Bauer, R. and Fleischauer P. D., “Tribological Performance and Deformation of Sputter-Deposited MoS2 Solid Lubricant Films During Sliding Wear and Indentation Contact,” Thin Solid Films, 188, pp 219-236, (1990)
18. Hilton, M. R. and Fleischauer, P. D., “Structural Studies of Sputter-Deposited MoS2 Solid Lubricant Films,” in New Materials Approaches to Tribology: Theory and Applications, Pope, L. E., Fchrenbacher, L. L. and Winer, W. O., eds., Materials Research Society, Pittsburgh, PA, 140, pp 227-238, (1989)
19. Zabinski, J. S., Donley, M. S., John, P.J., Dyhouse, V.J., Safriet, A.J. and McDevitt, N. T., “Crystallization of Molybdenum Disulfide Films Deposited by Pulsed Laser Ablation,” in Surface Chemistry and Beam-Solid Interactions, Atwater, H., Houle, F. A. and Lowndes, D., eds., Materials Research Society, Pittsburgh, PA, 201, pp 195-200, (1991)
20. Didziulis, S. V., Fleischauer, P. D., Soriano, B. L. and Gardos, M. N., “Chemical and Tribological Studies of MoS2, Films on SiC Substrates,” Surf Coat. Technol., 43/44, pp 652-662, (1990)
21. Bolster, R. N., Singer, I. L., Wegand, J. C., Fayculle, S. and Gossett, C. R., “Preparation by lon-Beam-Assisted Deposition, Analysis, and Tribological Behavior of MoS2 Films,” Surf Coat. Tech., 46, pp 207-216, (1991)
22. Sciuman, L. E., Bolster, R. N. and Singer, I. L., “X-ray Diffraction of MoS2 Coalings Prepared by Ion-Beam-Assisted Deposition,” Surf. Coat. Tech., 52, pp 93-98. (1992)
23. Seitzman, L. E., Singer, I. L., Bolster, R. N. and Gossett, C. R., “Effect of a Titanium Nitride Interlayer on the Endurance and Composition of a Molybdenum Disulfide Coaling Prepared by lon-Beam-Assisted Deposition,” Surf Coat. Tech., 51, pp 232-236, (1992)
24. Weasl, R. C., CMC Handbook of Chemistry and Physics, CRC Press, Inc., West Palm Beach, FL, 58th Ed., p B-134, (1978)
25. Roberts, E. W., “Ultralow Friction Films of MoS2 for Space Applications,” Thin Solid Films, 181, pp 461-473, (1989)
26. Panitz, J. K. G., Pope, L. E., Lyons, J. E. and Staley, D.J., “The Tribological Properties of MoS.¿ Coatings in Vacuum, Low Relative Humidity, and High Relative Humidity Environments,” J. Vac. Sci. Tech. A, 6, 3, pp 1166-1170, (1988)
27. Cullity, B. D., Elements of X-ray Diffraction, Addison-Wesley Publ. Co., Inc., Reading, MA, 2nd Ed., p 102, (1978)
28. Seitzman, L. E., Bolster, R. N. and Singer, I. L., “IBAD MoS2 Lubrication of Titanium Alloys,” Surf Coat. Tech., 75, (1995)
29. Fayeulle, S., Ehni, P. D. and Singer, I. L., “Role of Transfer Films in Wear of MoS2 Coatings,” in Mechanics of Coatings, Leeds-Lyon 16, Tribology Senes 17, Dowson, D., Taylor, C. M. and Godet, M., eds., Elsevier Science Publishers B. V., pp 129-138, (1990)
30. Fleischauer, P. D. and Bauer, R., “The Influence of Surface Chemistry on MoS2 Transfer Film Formation,” ASIJi Trans., 30, 2, pp 160-166, (1987)
31. Bhattarchaya, R. S., Rai, A. K. and Erdemir, A., “High Energy (MeV) Ion Beam Modifications of Sputtered MoS.¿ Coatings on Sapphire,” Nucl. Instr. Meth. Phys. Res. B, 59/60, pp 788-792, (1991)
32. Spalvins, T., “Frictional and Morphological Properties of Au-MoS2 Films Sputtered from a Compact Target,” Thin Solid Films, 118, pp 375-384, (1984)
33. Gardos, M. N., “The Synergistic Effects of Graphite on the Friction and Wear of MoS^ Films in Air,” Trib. Trans., 31, 2, pp 214-227, (1988)
34. Seitzman, L. E., Bolster, R. N. and Singer, I. L., “The Development of Dichalcogenide Solid Lubricating Coatings by Ion Beam Assisted Deposition,” in Navy Tribology Workshop, Extended Abstracts, U.S. Naval Academy, Annapolis, MD, 11-13 May 1992, Naval Sea Systems Command, Washington, DC, pp 24-26, (1992)
35. Fleischauer, P. D., “Effects of Crystallite Orientation on Environmental Stability and Lubrication Properties of Sputtered MoS2 Thin Films,” ASIJi Trans., 27, pp 82-88, (1984)
36. Bahl, O. P., Evans, E. L. and Thomas, J. M., “The Identification and Some Properties of Point Defects and Non-Basal Dislocations in Molybdenite Surfaces,” Proc. Roy. Soc. Ser. A, 306, pp 53-65, (1968)
37. Fayeulle, S., Ehni, P. D. and Singer, I. L., “Analysis of Transfer Films Formed on Steel and Co-WC During Sliding Against MoS2-Coated Steel in Argon,” Surf. Coat. Tech., 41, pp 93-101, (1990)
38. Chevallier, J., Olesen, S., Sorensen, G. and Gupta, B., “Enhancement of Sliding Life of MoS2 Films Deposited by Combining Sputtering and High-Energy Ion Implantation,” Appl. Phys. Lett., 48, 13, pp 876-877, (1986)