Turbulence dissipation in a free-surface jet of water and its effect on local impingement heat transfer from a heated surface: Part l---flow structure

Journal of Heat Transfer

Volumn 117, Issue 1, 1995, Pages 85-94

  Wolf, D H ^a,b   Viskanta, R ^a   Incropera, F P ^a  

^a PURDUE UNIVERSITY   (United States)

^b OWENS CORNING   (United States)

Author keywords

Jets; Turbulence

Indexed keywords

FLOW INTERACTIONS; JETS; MATHEMATICAL MODELS; NOZZLES; TURBULENT FLOW; VELOCITY MEASUREMENT;

FLOW STRUCTURE; IMPINGEMENT HEAT TRANSFER; IMPINGING JETS; JET TURBULENCE; NOZZLE DISCHARGES; TURBULENCE INTENSITY; VELOCITY GRADIENT;

HEAT TRANSFER;

FLOW; HEAT TRANSFER; JET IMPINGEMENT; TURBULENCE;

EID: 0029140141     PISSN: 00221481     EISSN: 15288943     Source Type: Journal    
DOI: 10.1115/1.2822327     Document Type: Article

References (42)

1. Bradshaw, P., 1971, An Introduction to Turbulence and Its Measurement, Pergamon Press, Oxford, pp. 24-28.
2. Deshpande, M. D., and Vaishnav, R. N., 1982, “Submerged Laminar Jet Impingement on a Plane,” Journal of Fluid Mechanics, Vol. 114, pp. 213-236.
3. Evans, H. L., 1962, “Mass Transfer Through Laminar Boundary Layers—Further Similar Solutions to the 5-Equation for the Case B = 0,” International Journal of Heat and Mass Transfer, Vol. 5, pp. 35-57.
4. Faggiani, S., and Grassi, W., 1990a, “Impinging Liquid Jets on Heated Surfaces,” Proceedings of the Ninth International Heat Transfer Conference, Vol. 1, pp. 275-285.
5. Faggiani, S., and Grassi, W., 1990b, “Round Liquid Jet Impingment Heat Transfer: Local Nusselt Numbers in the Region With Non Zero Pressure Gradient,” Proceedings of the Ninth International Heat Transfer Conference, Vol. 4, pp. 197-202.
6. Falkner, V. M., and Skan, S. W., 1931, “Some Approximate Solutions of the Boundary Layer Equations,” Philosophical Magazine, Vol. 12, pp. 865-896.
7. Friehe, C. A., and Schwarz, W. H., 1969, “The Use of Pitot-Static Tubes and Hot-Film Anemometers in Dilute Polymer Solutions,” Viscous Drag Reduction, Proceedings of the Symposium on Viscous Drag Reduction, C. S. Wells, ed., Plenum Press, New York, pp. 281-296.
8. Groth, J., and Johansson, A. V., 1988, “Turbulence Reduction by Screens,” Journal of Fluid Mechanics, Vol. 197, pp. 139-155.
9. Hinze, J. O., 1975, Turbulence, 2nd ed., McGraw-Hill, New York, pp. 72, 143-144.
10. Hoogendoom, C. J., 1977, “The Effect of Turbulence on Heat Transfer at a Stagnation Point,” International Journal of Heat and Mass Transfer, Vol. 20, pp. 1333-1338.
11. Hoyt, J. W., and Taylor, J. J., 1977, “Turbulence Structure in a Water Jet Discharging in Air,” Physics of Fluids, Vol. 20, No. 10, pp. S253-S257.
12. Hoyt, J. W., and Taylor, J. J., 1985, “Effect of Nozzle Boundary Layer on Water Jets Discharging Into Air,” Jets and Cavities—International Symposium, ASME, New York, pp. 93-100.
13. Hussain, A. K. M. F., and Reynolds, W. C., 1975, “Measurements in Fully-Developed Turbulent Channel Flow,” ASME Journal of Fluids Engineering, Vol. 97, pp. 568-580.
14. Jambunathan, K., Lai, E., Moss, M. A., and Button, B. L., 1992, “A Review of Heat Transfer Data for Single Circular Jet Impingement,” International Journal of Heat and Fluid Flow, Vol. 13, pp. 106-115.
15. Kataoka, K., 1990, “Impingement Heat Transfer Augmentation Due to Large Scale Eddies,” Proceedings of the Ninth International Heat Transfer Conference, G. Hetsroni, ed., Vol. 1, pp. 255-273.
16. Kestin, J., and Wood, R. T., 1971, “The Influence of Turbulence on Mass Transfer From Cylinders,” ASME JOURNAL OF HEAT TRANSFER, Vol. 93, pp. 321-327.
17. Kline, S. J., and McClintock, F. A., 1953, “Describing Uncertainties in SingleSample Experiments,” Mechanical Engineering, Vol. 75, Jan., pp. 3-8.
18. Levy, S., 1952, “Heat Transfer to Constant-Property Laminar Boundary-Layer Flows With Power-Function Free-Stream Velocity and Wall-Temperature Variation,” Journal of the Aeronautical Sciences, Vol. 19, pp. 341-348.
19. Lowery, G. W., and Vachon, R. I., 1975, “The Effect of Turbulence on Heat Transfer From Heated Cylinders,” International Journal of Heat and Mass Transfer, Vol. 18, pp. 1229-1242.
20. Martin, H., 1977, “Heat and Mass Transfer Between Impinging Gas Jets and Solid Surfaces,” Advances in Heat Transfer, T. F. Irvine, Jr. and J. P. Hartnett, eds., Academic Press, New York, Vol. 13, pp. 1-60.
21. Milne-Thomson, L. M., 1955, Theoretical Hydrodynamics, 3rd ed., Macmillan Company, New York, pp. 279-289.
22. Moffat, R. J., 1988, “Describing the Uncertainties in Experimental Results,” Experimental Thermal and Fluid Science, Vol. 1, pp. 3-17.
23. Morrow, T. B., and Kline, S. J., 1971, “The Evaluation and Use of Hot-Wire and Hot-Film Anemometers in Liquids,” Stanford University, Report MD-25.
24. Pan, Y., Stevens, J., and Webb, B. W., 1992, “Effect of Nozzle Configuration on Transport in the Stagnation Zone of Axisymmetric, Impinging Free-Surface Liquid Jets: Part 2—Local Heat Transfer,” ASME JOURNAL OF HEAT TRANSFER, Vol. 114, pp. 880-886.
25. Polat, S., Huang, B., Mujumdar, A. S., and Douglas, W. J. M., 1989, “Numerical Flow and Heat Transfer Under Impinging Jets: A Review,” Annual Review of Numerical Fluid Mechanics and Heat Transfer, C. C. Tien and T. C. Chawla, eds., Hemisphere, New York, Vol. 2, pp. 157-197.
26. Resch, F. J., 1970, “Hot-Film Turbulence Measurements in Water Flow,” Journal of the Hydraulics Division of ASCE, Vol. 96, No. HY3, Proceedings Paper 7177, pp. 787-800.
27. Rodriguez, J. M., Patterson, G. K., and Zakin, J. L., 1970, “Effects of Probe Geometry on Turbulence Measurements in Liquids Using Hot-Film Anemometry,” Journal of Hydronautics, Vol. 4, pp. 16-21.
28. Scholtz, M. T., and Trass, O., 1970, “Mass Transfer in a Nonuniform Impinging Jet,” AIChE Journal, Vol. 16, No. 1, pp. 82-96.
29. Sparrow, E. M„ and Lee, L., 1975, “Analysis of Fluid Field and Impingement Heat/Mass Transfer Due to a Nonuniform Slot Jet,” ASME Journal of Heat Transfer, Vol. 97, pp. 191-197.
30. Stevens, J., and Webb, B. W., 1991, “Local Heat Transfer Coefficients Under an Axisymmetric, Single-Phase Liquid Jet,” ASME Journalof Heat Transfer, Vol. 113, pp. 71-78.
31. Stevens, J., and Webb, B. W., 1992, “Measurements of the Free Surface Flow Structure Under an Impinging, Free Liquid Jet,” ASME JOURNALOF HEAT TRANSFER, Vol. 114, pp. 79-84.
32. Stevens, J., Pan, Y., and Webb, B. W., 1992, “Effect of Nozzle Configuration on Transport in the Stagnation Zone of Axisymmetric, Impinging Free-Surface Liquid Jets: Part 1—Turbulent Flow Structure,” ASME JOURNALOF HEAT TRANSFER, Vol. 114, pp. 874-879.
33. Taylor, J. J., and Hoyt, J. W., 1983, “Water Jet Photography—Techniques and Methods,” Experiments in Fluids, Vol. 1, pp. 113-120.
34. Vader, D. T., Incropera, F. P., and Viskanta, R, 1991, “Local Convective Heat Transfer From a Heated Surface to an Impinging, Planar Jet of Water,” International Journal of Heat and Mass Transfer, Vol. 34, pp. 611-623.
35. vanderMeer, T. H., 1987, “Heat Transfer From Impinging Flame Jets,” Doctoral Thesis, Technical University of Delft, The Netherlands.
36. van der Meer, T. H., 1991, “Stagnation Point Heat Transfer From Turbulent Low Reynolds Number Jets and Flame Jets,” Experimental Thermal and Fluid Science, Vol. 4, pp. 115-126.
37. VanFossen, G. J., Jr., and Simoneau, R. J., 1987, “A Study of the Relationship Between Free-Stream Turbulence and Stagnation Region Heat Transfer,” ASME JOURNAL OF HEAT TRANSFER, Vol. 109, pp. 10-15.
38. Viskanta, R., 1993, “Heat Transfer to Impinging Isothermal Gas and Flame Jets,” Experimental Thermal and Fluid Science, Vol. 6, pp. 111-134.
39. Warschauer, K. A., Vijge, J. B. A., and Boschloo, G. A., 1974, “Some Experiences and Considerations on Measuring Turbulence in Water With Hot Films,” Applied Scientific Research, Vol. 29, pp. 81-98.
40. Wolf, D. H., Viskanta, R., and Incropera, F. P., 1990, “Local Convective Heat Transfer From a Heated Surface to a Planar Jet of Water With a Nonuniform Velocity Profile,” ASME JOURNALOF HEAT TRANSFER, Vol. 112, pp. 899-905.
41. Wolf, D. H., 1993, “Turbulent Development in a Free-Surface Jet and Impingement Boiling Heat Transfer,” Ph.D. Thesis, Purdue University, West Lafayette, IN.
42. Zumbrunnen, D. A., Incropera, F. P., and Viskanta, R., 1989, “Convective Heat Transfer Distributions on a Plate Cooled by Planar Water Jets,” ASME JOURNAL OF HEAT TRANSFER, Vol. 111, pp. 889-896.