Nonlinear Control of Electric Machines: An Overview

IEEE Control Systems

Volumn 14, Issue 6, 1994, Pages 41-51

  Taylor, David G ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SOFTWARE; CONTROL NONLINEARITIES; CONTROL SYSTEM SYNTHESIS; ELECTRIC MACHINERY; ELECTRONIC EQUIPMENT; LINEARIZATION; PARAMETER ESTIMATION; PERFORMANCE; STATE ESTIMATION; TECHNOLOGY;

FEEDBACK CONTROL; POWER ELECTRONICS;

NONLINEAR CONTROL SYSTEMS;

EID: 0028732909     PISSN: 1066033X     EISSN: None     Source Type: Journal    
DOI: 10.1109/37.334414     Document Type: Article

References (80)

1. P.P, Acarnley, R.J. Hill, and C.W. Hooper, “Detection of rotor position in stepping and switched motors by monitoring of current waveforms,” IEEE Transactions on Industrial Electronics, vol. 32, no. 3, pp. 215–222, 1985.
2. S. Ahmed-Zaid P.W. Sauer, M.A. Pai and M.K. Sarioglu, “Reduced order modeling of synchronous machines using singular perturbation,” IEEE Transactions on Circuits and Systems, vol. 29, no. 11, pp. 782–786, 1982.
3. L.B. Amor, L.A. Dessaint, O. Akhrif, and G. Olivier, “Adaptive feedback linearization for position control of a switched reluctance motor: Analysis and simulation,” International Journal of Adaptive Control and Signal Processing, vol. 7, pp. 117–136, 1993.
4. D.J. Atkinson, P.P. Acarnley and J.W. Finch, “Observers for induction motor state and parameter estimation,” IEEE Transactions on Industry Applications, vol. 27, no. 6. pp. 1119-1127,1991.
5. F. Blaschke, “The principle of field orientation applied to the new transvector closed-loop control system for rotating field machines,” Siemens Review, vol. 39, pp. 217-220,1972.
6. A.J. Blanch M. Bodson, and J. Chiasson, “High-speed parameter estimation of stepper motors,” IEEE Transactions on Control Systems Technology, vol. 1, no. 4, pp. 270–279, 1993.
7. M. Bodson and J.N. Chiasson, “A systematic approach to selecting optimal flux references in induction motors,” Record of the 1992 IEEE Industry Applications Society Annual Meeting, Houston, TX, pp. 531-537, 1992.
8. M. Bodson, J. Chiasson, and R. Novotnak, “High-performance induction motor control via input-output linearization,” IEEE Control Systems Magazine, vol. 14, no. 4, pp. 25–33, 1994.
9. M. Bodson, J.N. Chiasson, R.T. Novotnak, and R.B. Rekowski, “High-performance nonlinear feedback control of a permanent magnet stepper motor,” IEEE Transactions on Control Systems Technology, vol. 1 no. 1, pp. 5-14,1993.
10. B.K. Bose (editor), “Special Issue on Power Electronics and Motion Control,” Proceedings of the IEEE, vol. 82, no. 8, 1994.
11. R.H. Brown, S.C. Schneider, and M.G. Mulligan “Analysis of algorithms for velocity estimation from discrete position versus time data,” IEEE Transactions on Industrial Electronics, vol. 39, no. 1, pp. 11–19, 1992.
12. J.J. Carroll, D.M. Dawson, and Z. Qu, “Robust tracking control of a switched reluctance motor turning an inertial load,” Proceedings of the 1992 American Control Conference Chicago IL pp. 1520-1522,1992.
13. J.J. Carroll and D.M. Dawson, “Robust tracking control of a brushless dc motor with application to direct-drive robotics,” Proceedings of the IEEE International Conference on Robotics and Automation, Atlanta, GA, pp. 94–99, 1993.
14. J.J. Carroll and D.M. Dawson, “Adaptive tracking control of a switched reluctance motor turning an inertial load,” Proceedings of the 1993 American Control Conference, San Francisco CA, pp. 670–674, 1993.
15. D. Chen and B. Paden, “Adaptive linearization of hybrid step motors: Stability analysis,” IEEE Transactions on Automatic Control, vol. 38, no. 6, pp. 874–887, 1993.
16. J.N. Chiasson and R.T. Novotnak, “Nonlinear speed observer for the PM stepper motor,” IEEE Transactions on Automatic Control, vol. 38, no. 10, pp. 1584–1588, 1993.
17. J. Chiasson, “Dynamic feedback linearization of the induction motor,” IEEE Transactions on Automatic Control, vol. 38, no. 10, pp. 1588–1594, 1993.
18. J. Chiasson and M. Bodson, “Nonlinear control of a shunt DC motor,” IEEE Transactions on Automatic Control. vol. 38, no. 11, pp. 1662–1666, 1993.
19. J. Chiasson, “Nonlinear differential-geometric techniques for control of a series DC motor,” IEEE Transactions on Control Systems Technology, vol. 2, no. 1, pp. 35–42, 1994.
20. C.F. Christiansen, R. Battaiotto, D. Fernandez, and E. Tacconi, “Digital measurement of angular velocity for speed control,” IEEE Transactions on Industrial Electronics, vol. 36, no. 1, pp. 79–83, 1989.
21. D.M. Dawson, Z. Qu, and J.J. Carroll, ‘’Tracking control of rigid-link electrically-driven robot manipulators,” International Journal of Control, vol. 56, no. 5, pp. 991-1006,1992.
22. D. Dawson, Z.-Qu, and J. Hu, “Robust tracking control of an induction motor,” Proceedings of the 1993 American Control Conference, San Francisco, CA, pp. 648–652, 1993.
23. A. De Luca and G. Ulivi, “Design of an exact nonlinear controller for induction motors,” IEEE Transactions on Automatic Control, vol. 34, no. 12, pp. 1304–1307, 1989.
24. N. Ertugrul and P. Acarnley, “A new algorithm for sensorless operation of permanent magnet motors,” IEEE Transactions on Industry Applications, vol. 30, no. 1, pp. 126–133, 1994.
25. G. Espinosa and R. Ortega, “Control of induction motor models in a fixed reference frame,” presented at the 32nd IEEE Conference on Decision and Control, San Antonio, TX, 1993 (not in proceedings).
26. G. Espinosa and R. Ortega, “State observers are unnecessary for induction motor control,” to appear in Systems and Control Letters.
27. O. Espinosa and R. Ortega, “An output feedback globally stable controller for induction motors,” to appear in IEEE Transactions on Automatic Control.
28. F. Filicori, C.G. Lo Bianco, and A. Tonielli, “Modeling and control strategies for a variable reluctance direct-drive motor,” IEEE Transactions on Industrial Electronics, vol. 40, no. 1, pp. 105–115, 1993.
29. I.J. Ha and C.I. Kang, “Explicit characterization of all feedback linearizing controllers for a general type brushless dc motor,” IEEE Transactions on Automatic Control, vol. 39, no. 3, pp. 673-677,1994.
30. W.D. Harris and J.H. Lang, “A simple motion estimator for variable-re-luctance motors,” IEEE Transactions on Industry Applications, vol. 26, no. 2, pp, 237–243, 1990.
31. N. Hemati, J.S. Thorp and M.C. Leu, “Robust nonlinear control of brushless dc motors for direct-drive robotic applications,” IEEE Transactions on Industrial Electronics, vol. 37, no. 6, pp. 460–468, 1990.
32. N. Hemati and M.C. Leu, “A complete model characterization of brushless dc motors,” IEEE Transactions on Industry Applications, vol. 28, no. 1, pp. 172–180, 1992.
33. J. Hu, D.M. Dawson, and J.J. Carroll, “An adaptive integrator backstepping tracking controller for brushless dc motor robotic load,” Proceedings of the 1994 American Control Conference, Baltimore, MD, pp. 1401–1405, 1994.
34. J. Hu, D.M. Dawson, and Z. Qu, “Adaptive tracking control of an induction motor with robustness to parametric uncertainty,” IEE Proceedings: Electric Power Applications, vol. 141, no. 2, pp. 85–94, 1994.
35. M. Ilic-Spong R. Marino, S.M. Peresada, and D.G. Taylor, “Feedback linearizing control of switched reluctance motors,” IEEE Transactions on Automatic Control, vol. 32, no. 5, pp. 371-379,1987.
36. A. Isidori, Nonlinear Control Systems, 2nd Edition. New York, NY: Springer-Verlag, 1989.
37. L.A. Jones and J.H. Lang, “A state observer for the permanent-magnet synchronous motor,” IEEE Transactions on Industrial Electronics, vol. 36, no. 3, pp. 374-382,1989.
38. I. Kanellakopoulos, P.T. Krein, and F. Disilvestro, “Nonlinear flux-ob-server-based control of induction motors,” Proceedings of the 1992 American Control Conference, Chicago, IL, pp. 1700–1704, 1992.
39. I. Kanellakopoulos, P.V. Kokotovic, and A.S. Morse, “A toolkit for nonlinear feedback design,” Systems and Control Letters, vol. 18, pp. 83–92, 1992.
40. G.S. Kim, I.J. Ha, and M.S. Ko, “Control of induction motors for both high dynamic performance and high power efficiency,” IEEE Transactions on Industrial Electronics, vol. 39, no. 4, pp. 323–333, 1992.
41. D.I. Kim, I.J. Ha, and M.S. Ko, “Control of induction motors via feedback linearization with input-output decoupling,” International Journal of Control, vol. 51, no. 4, pp. 863–883, 1990.
42. P.V. Kokotovic, H.K. Khalil and J. O’Reilly, Singular Perturbation Methods in Control: Analysis and Design. New York, NY: Academic Press, 1986.
43. D.S. Kirschen, D.W. Novotny, and T.A. Lipo, “Optimal efficiency control of an induction motor drive,” IEEE Transactions on Energy Conversion, vol. 2, no. 1, pp. 70–75, 1987.
44. J.H. Lang, G.C. Verghese, and M. Ilic-Spong, “Opportunities in estimation and control of electrical machines,” Proceedings of the 25th IEEE Conference on Decision and Control, Athens, Greece, pp. 379-387,1986.
45. Z. Krzeminski, “Nonlinear control of induction motor,” Proceedings of the 10th IFAC World Congress, Munich, Germany, pp. 349–354, 1987.
46. P.C. Krause, Analysis of Electric Machinery. New York, NY: McGraw-Hill, 1986.
47. A. Lumsdaine and J.H. Lang, “State observers for variable-reluctance motors,” IEEE Transactions on Industrial Electronics, vol. 37, no. 2, pp. 133–142, 1990.
48. R.D. Lorenz and K.W. Van Patten, “High-resolution velocity estimation for all-digital ac servo drives,” IEEE Transactions on Industry Applications, vol. 27, no. 4, pp. 701-705,1991.
49. X.Z. Liu, G.C. Verghese, J.H. Lang, and M.K. Onder, “Generalizing the Blondel-Park transformation of electrical machines: Necessary and sufficient conditions,” IEEE Transactions on Circuits and Systems, vol. 36, no. 8, pp. 1058–1067, 1989.
50. S.R. MacMinn, W.J. Rzesos, P.M. Szczesny, and T.M. Jahns, “Application of sensor integration techniques to switched reluctance motor drives,” IEEE Transactions on Industry Applications, vol. 28, no. 6, pp. 1339–1344, 1992.
51. R. Marino, S. Peresada, and P. Valigi, “Adaptive input-output linearizing control of induction motors,” IEEE Transactions on Automatic Control, vol. 38, no. 2, pp. 208–221, 1993.
52. D.G. Manzer, M. Varghese, and J.S. Thorp, “Variable reluctance motor characterization,” IEEE Transactions on Industrial Electronics, vol. 36, no. 1, pp. 56-63,1989.
53. S. Nonaka and Y. Neba, “Current regulated PWM-CSI induction motor drive system without a speed sensor,” IEEE Transactions on Industry Applications, vol. 30, no. 1, pp. 116–125, 1994.
54. R. Nilsen and M.P. Kazmierkowski, “Reduced-order observer with parameter adaptation for fast rotor flux estimation in induction machines,” Proceedings of the IEE pt. D vol. 136, no. 1, pp. 35–43, 1989.
55. P.D. Oliver, “Feedback linearization of dc motors,” IEEE Transactions on Industrial Electronics, vol. 38, no. 6, pp. 498–501, 1991.
56. R. Ortega and O. Espinosa, “A controller design methodology for systems with physical structures: Application to induction motors,” Proceedings of the 30th IEEE Conference on Decision and Control. Brighton, England, pp. 2345-2349,1991.
57. R. Ortega and G. Espinosa, “Torque regulation of induction motors,” Automatica, vol. 29, no. 3, pp. 621–633, 1993.
58. R. Ortega, C. Canudas, and S.I. Seleme, “Nonlinear control of induction motors: Torque tracking with unknown load disturbance,” IEEE Transactions on Automatic Control, vol. 38, no. 11, pp. 1675–1680, 1993.
59. R.H. Park, ‘’Two reaction theory of synchronous machines: Part I,” AIEE Transactions, vol. 48, pp. 716–730, 1929.
60. R.H. Park, “Two reaction theory of synchronous machines: Pan II,” AIEE Transactions, vol. 52, pp. 352–354, 1933.
61. R.B. Sepe and J.H. Lang, “Real-time adaptive control of the permanent-magnet synchronous motor,” IEEE Transactions on Industry Applications. vol. 27, no. 4, pp. 706–714, 1991.
62. R.B. Sepe and J.H. Lang, “Real-time observer-based (adaptive) control of-a permanent-magnet synchronous motor without mechanical sensors,” IEEE Transactions on Industry Applications. vol. 28, no. 6, pp. 1345–1352, 1992.
63. P.M. Sharkey and J. O’Reilly, “Exact design manifold control of a class of nonlinear singularly perturbed systems,” IEEE Transactions on Automatic Control, vol. 32, no. 10, pp. 933–935, 1987.
64. K.R. Shouse, “Reduced-order block techniques for singularly perturbed systems with application to permanent-magnet synchronous motors,” Ph.D. Thesis, Georgia Institute of Technology, Atlanta, GA August 1993.
65. K.R. Shouse and D.G. Taylor, “A digital self-tuning tracking controller for permanent-magnet synchronous motors,” Proceedings of the 32nd IEEE Conference on Decision and Control. San Antonio, TX, pp. 3397–3402, 1993.
66. K.R. Shouse and D.G. Taylor, “Sensorless velocity control of permanent-magnet synchronous motors,” to appear in Proceedings of the 33rd IEEE Conference on Decision and Control, Orlando, FL, 1994.
67. J.J.E. Slotine and W. Li, Applied Nonlinear Control. Englewood Cliffs, NJ: Prentice Hall, 1991.
68. R.C. Speagle and D.M. Dawson, “Robust tracking control of a permanent magnet stepper motor driving a mechanical load,” Proceedings of the Southeastern Symposium on System Theory, Tuscaloosa, AL, pp. 43–47, 1993.
69. R.C. Speagle and D.M. Dawson, “Adaptive tracking control of a permanent magnet stepper motor driving a mechanical load,” Proceedings of the IEEE Southeastcon 93, Charlotte, NC, 1993 (no page numbers).
70. J. Stephan, M. Bodson, and J. Chiasson, “Real-time estimation of the parameters and fluxes of induction motors,” IEEE Transactions on Industry Applications. vol. 30, no. 3, pp. 746–759, 1994.
71. H. Tajima and Y. Hori, “Speed sensorless field-orientation control of the induction machine,” IEEE Transactions on Industry Applications, vol. 29, no. 1, pp. 175–180, 1993.
72. D.G. Taylor, “Pulse-width modulated control of electromechanical systems,” IEEE Transactions on Automatic Control, vol. 37, no. 4, pp. 524–528, 1992.
73. G.C. Verghese and S.R. Sanders, “Observers for flux estimation in induction machines,” IEEE Transactions on Industrial Electronics, vol. 35, no. 1, pp. 85–94, 1988.
74. G.C. Verghese, J.H. Lang, and L.F. Casey, “Analysis of instability in electrical machines,” IEEE Transactions on Industry Applications, vol. 22, no. 5, pp. 852–864, 1986.
75. R.S. Wallace and D.G. Taylor, “A balanced commutator for switched reluctance motors to reduce torque ripple,” IEEE Transactions on Power Electronics, vol. 7, no. 4, pp. 617–626, 1992.
76. R.S. Wallace and D.G. Taylor, “Low-torque-ripple switched reluctance motors for direct-drive robotics,” IEEE Transactions on Robotics and Automation, vol. 7, no. 6, pp. 733–742, 1991.
77. X. Xu and D.W. Novotny, “Selection of the flux reference for induction machine drives in the field weakening region,” IEEE Transactions on Industry Applications, vol. 28, no. 6, pp. 1353–1358, 1992.
78. G. Yang and T.H. Chin, “Adaptive speed identification scheme for a vector-controlled speed sensorless inverter-induction motor drive,” IEEE Transactions on Industry Applications, vol. 29, no. 4, pp. 820–825, 1993.
79. D.C. Youla and J.J. Bongiorno, “A Floquet theory of the general linear rotating machine,” IEEE Transactions on Circuits and Systems, vol. 27, pp. 15–19, 1980.
80. M. Zribi and J. Chiasson, “Position control of a PM stepper motor by exact linearization,” IEEE Transactions on Automatic Control, vol. 36, no. 5, pp. 620–625, 1991.