Motion Control with Permanent-Magnet AC Machines

Proceedings of the IEEE

Volumn 82, Issue 8, 1994, Pages 1241-1252

  Jahns, Thomas M ^a  

^a GE GLOBAL RESEARCH   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALGORITHMS; ELECTRIC DRIVES; MOTION CONTROL; PERMANENT MAGNETS; ROBUSTNESS (CONTROL SYSTEMS); SENSORS; SERVOMECHANISMS; VARIABLE SPEED DRIVES;

PERMANENT MAGNET AC MACHINES; SERVOCONTROL ALGORITHMS;

AC MACHINERY;

EID: 0028484994     PISSN: 00189219     EISSN: 15582256     Source Type: Journal    
DOI: 10.1109/5.301686     Document Type: Article

References (56)

1. F. Strauss, “Synchronous machines with rotating PM fields,” Trans. AIEE, vol. 70, pt. II, pp. 1578–1581, 1952.
2. M. A. Rahman and A. M. Osheiba, “Performance of large line-start start pm synchronous motors,” IEEE Trans. Energy Conv., vol. 5, no. 1, pp. 211–217, 1990.
3. DC Motors, Speed Controls, Servo Systems, 1st ed. Hopkins, MN: Electro-Craft Corp., 1972.
4. G. Pfaff, A. Weschta. and A. Wick, “Design and experimental results of a brushless ac servo drive,” in IEEE lAS Annu. Meet. Rec., pp. 692–697, 1982.
5. G. R. Slemon, “Electrical machines for variable-frequency drives,” this issue, pp. 0000–0000.
6. P. P. Acamley and A. G. Jack, “Power circuits for small PM brushless dc drives,” in Proc. IEE Power Electronics and Variable Speed Drives (PEVSD) Conf, pub. no. 291, pp. 237–240, 1988.
7. H. Bausch, “Large power variable speed ac machines with PM excitation,” J. Elec. Electron. Eng. (Australia), vol. 10, no. 2, pp. 102–109, Jun. 1990.
8. C. L. Neft and C. D. Schauder, “Theory and design of a 30 hp matrix converter,” IEEE Trans. Ind. Appl., vol. 28, no. 3, pp. 546–551, May/June 1992.
9. B. K. Bose, “Power electronics and motion control—Technology status and recent trends,” IEEE Trans. Ind. Appl. vol. 29, no. 5, pp. 902–909, Sept./Oct. 1993.
10. G. R. Slemon and A. V. Gumaste, “Steady-state analysis of a pm synchronous motor drive with current source inverters,” IEEE Trans. Ind. Appl., vol. IA-19, no. 2, pp. 190–197, Mar./Apr. 1983.
11. I. Takahashi, T. Koganezawa, G. Su, and K. Oyama, “A super high-speed PM motor drive system by a quasi-current source inverter,” in IEEE IAS Ann. Meet. Rec., pp. 657–662, 1993.
12. G. R. Slemon and A. Straughen, Electric Machines. Reading, MA: Addison-Wesley, 1980.
13. A. Kusko and S.M. Peeran, “Definition of the brushless dc motor,” in IEEE IAS Ann. Meet. Rec., pp. 20–22, 1988.
14. C. K. Patni and B. W. Williams, “The effect of modulation techniques and electromagnetic design on torque ripple in brushless dc motors,” in Proc. IEE PEVSD Conf., pub. no. 264, pp. 76–79, 1986.
15. T. J. E. Miller, Brushless PM and Reluctance Motor Drives. Oxford, UK: Clarendon, 1989.
16. R. D. Lorenz, “Sensors and signal converters in PMAC motor drives,” in Tutorial Notes: Performance & Design of PMAC Motor Drives, doc. TH0408-5, IEEE Pub. Serv., 1991.
17. R. C. Becerra, M. Ehsani, and T. M. Jahns, “Four-quadrant brushless ECM drive with integrated current regulation,” IEEE Trans. Ind. Appl., vol. 28, no. 4, pp. 833–841, July/Aug. 1992.
18. T. Li and G. R. Slemon, “Reduction of cogging torque in PM motors,” IEEE Trans. Magn., vol. 24, no. 6, pp. 2901–2903, 1988.
19. L. Schulting and H. Ch. Skudelny, “A control method for permanent magnet synchronous motors with trapezoidal electromotive force,” in Proc. European Power Electronics Conf. (EPE), vol. 4, pp. 117–122, 1991.
20. R. Carlson, M. Lajoie-Mazenc, and J. C. Fagundes, “Analysis of torque ripple due to phase commutations in brushless dc machines,” in IEEE IAS Annu. Meet. Rec., pp. 287–292, 1990.
21. T. M. Jahns, “Torque production in permanent magnet synchronous motor drives with rectangular current excitation,” IEEE Trans. Ind. Appl, vol. IA-20, no. 4, pp. 803–813, July/Aug. 1984.
22. R. C. Becerra and M. Ehsani, “High-speed torque control of brushless PM motors,” IEEE Trans. Ind. Electron., vol. 35, no. 3, pp. 402–406, Aug. 1988.
23. A. Fratta, A. Vagati, and F. Villata, “Extending the voltage saturated performance of a dc brushless drive,” in Proc. EPE Conf., vol. 4, pp. 134–138, 1991.
24. G. Schaefer, “Field weakening of brushless pm servomotors with rectangular current,” in Proc. EPE Conf., vol. 3, pp. 429–434, 1991.
25. T. M. Jahns, G. B. Kliman, and T. W. Neumann, “Interior PM synchronous motors for adjustable-speed drives,” IEEE Trans. Ind. Appl., vol. IA-22, no. 4, pp. 738–747, July/Aug. 1986.
26. T. Sebastian and G. R. Slemon, “Operating limits of inverter-driven driven PM motor drives,” IEEE Trans. Ind. App., vol. IA-23, no. 2, pp. 327–333, Mar./Apr. 1987.
27. P. N. Enjeti, P. D. Ziogas, and J. L. Lindsay, “Programmed PWM techniques to eliminate harmonics: A critical evaluation,” IEEE Trans. Ind. Appl. vol. 26, no. 2, pp. 302–316, Mar./Apr. 1990.
28. D. M. Brod and D. W. Novotny, “Current control of VSIPWM inverters,” IEEE Trans. Ind. Appl., vol. IA-21, no. 3, pp. 562–570, May/Jun. 1985.
29. S. Morimoto, Y. Takeda, T. Hirasa, and K. Taniguchi, “Expansion of operating lim i ts for PM motor by optimum flux weakening,” IEEE Trans. Ind. Appl. vol. 26, no. 5, pp. 866–871, Sept./Oct. 1990.
30. B. K. Bose, “A high-performance inverterfed drive system of an interior PM synchronous machine,” IEEE Trans. Ind. Appl., vol. 24, no. 6, pp. 987–997, Nov./Dec. 1988.
31. M. Bilewski, A. Fratta, L. Giordano, A. Vagati, and F. Villata, “Control of high performance interior PM synchronous drives,” in IEEE IAS Annu. Meet. Rec., pp. 531–538, 1990.
32. T. M. Jahns, “Flux weakening regime operation of an interior PM synchronous motor drive,” IEEE Trans. Ind. Appl., vol. IA-23, no. 4, pp. 681–689, July/Aug. 1987.
33. R. Schifer and T. A. Lipo, “Power capability of salient pole PM synchronous motors in variable speed drive applications,” IEEE Trans. Ind. Appl. vol. 26, no. 1, pp. 115–123, Jan./Feb. 1990.
34. W. L. Soong, D. A. Staton, and T. J. E. Miller, “Design of a new axially-laminated interior PM motor,” in IEEE IAS Annau. Meet. Rec., pp. 27–36, 1993.
35. M. Jufer and R. Osseni, “Back EMF indirect detection for self-commutation commutation of synchronous motors,” in Proc. EPE Conf, pp. 1125–1129, 1987.
36. P. W. Lee and C. Pollock, “Rotor position detection techniques for brushless PM and reluctance motor drives,” in IEEE IAS Annu. Meet. Rec., pp. 448–455, 1992.
37. R. C. Beceffa, T. M. Jahns, and M. Ehsani, “Four-quadrant sensorless brushless ECM drive,” in Proc. Applied Power Electronics Conf.(APEC), pp. 202–209, 1991.
38. N. Ertugru and P. P. Acarnley, “A new algorithm f o r sensorless operation of PM motors,” in IEEE IAS Annu. Meet. Rec., pp. 414–421, 1992.
39. A. B. Kulkarni and M. Ehsani, “A novel position sensor elimination technique for the interior PM synchronous motor drive,” in IEEE IAS Annu. Meet. Rec., pp. 773–779, 1989.
40. J. F. Moynihan, R. C. Kavanagh, M. G. Egan, and J. M. D. Murphy, “Indirect phase current detection for field oriented control of a permanent magnet synchronous motor drive,” in Proc. EPE Conf., vol. 3, pp. 641–646, 1991.
41. T. M. Jahns, R. C. Becerra, and M. Ehsani, “Integrated current regulation for a brushless ECM drive,” IEEE Trans. Power Electron., vol. 6, no. 1, pp. 118–126, Jan. 1991.
42. A. Consoli, A. Raciti, and A. Testa, “Experimental low Chattering chattering sliding-mode control of a PM motor drive,” in Proc. EPE Conf. vol. 1, pp. 13–18, 1991.
43. N. Matsui and H. Ohashi, “DSP-based adaptive control of a brushless motor,” in IEEE 1AS Annu. Meet. Rec., pp. 375–380, 1988.
44. R. B. Sepe and J. H. Lang, “Realtime adaptive control of the PM synchronous motor,” IEEE Trans. Ind. Appl. vol. 27, no. 4, pp. 706–714, July/Aug. 1991.
45. E. Cerruo, A. Consoli, A. Raciti, and A. Testa, “Adaptive fuzzy control of high performance motion systems,” in Proc. IEEE Industrial Electronics Conf. (IECON), pp. 88–94, 1992.
46. H. Le-Huy, K. Slimani, and P. Viarouge, “A predictive current controller for synchronous motor drives,” in Proc. EPE Conf., vol. 2, pp. 114–119, 1991.
47. N. Matsui and H. Ohashi, “DSP-based adaptive control of a brushless motor,” in IEEE IAS Annu. Meet. Rec., pp. 375–380, 1988.
48. R. D. Lorenz, M. R. Buhl, and D. M. Divan, “Design and implementation of neural networks for digital current regulation of inverter drives,” in IEEE IAS Annu. Meet. Rec., pp. 415–421, 1991.
49. A. M.Tryzynadlowski and S. Legowski, “Application of neural networks to the optimal control of 3-Ph. voltage-controlled power inverters,” in Proc. IECON, pp. 524–529, 1992.
50. P. Zimmerman, “Electronically commutated dc feed drives for machine tools,” in Proc. Motorcon Conf, pp. 69–86, 1982.
51. S. Williams, “Direct drive system for an industrial robot using a brushless dc motor,” Proc. Inst. Elec. Eng.„ vol. 132, pt. B, no. 1, pp. 53–56, 1985.
52. T. Kenjo and S. Nagamori, PM and Brushless DC Motors. Oxford, UK: Clarendon, 1985.
53. T. M. Jahns and R. C. Van Nocker, “High-performance EHA control using an interior PM motor,” IEEE Trans. Aerosp. Elec. Syst., vol. 26, no. 3, pp. 534–542, May 1990.
54. L. Sulfstede, “Applying power electronics to residential HVAC—The issues,” in Proc. APEC Conf., pp. 615–621, 1991.
55. R. D. King, “ETX-II 70 hp electric drive system performance—Component tests,” in Proc. 10th Int. Electric. Vehicle. Symp., pp. 878–887, 1990.
56. “Brushless dc motor line extended to 600 hp,” Contr. Eng., p. 79, Dec. 1992.