Monoliths in Heterogeneous Catalysis

Catalysis Reviews

Volumn 36, Issue 2, 1994, Pages 179-270

  Cybulski, Andrze ^a   Moulin, Jacob ^a  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

CATALYSIS; CERAMIC MATERIALS; CHEMICAL REACTIONS; CHEMICAL REACTORS; COMBUSTION; HEAT TRANSFER; HYDROGENATION; MASS TRANSFER; OXIDATION; PACKED BEDS; SYNTHESIS (CHEMICAL);

GAS/LIQUID REACTIONS; HONEYCOMB CATALYST; MEMBRANE REACTORS; MONOLITHIC CATALYST; MONOLITHIC REACTORS; MONOLITHS; PRESSURE DROP;

CATALYSTS;

EID: 0028439426     PISSN: 01614940     EISSN: 15205703     Source Type: Journal    
DOI: 10.1080/01614949408013925     Document Type: Article

References (164)

1. J. P. De Luca and L. E. Campbell, Monolithic catalyst supports, in Advanced Materials in Catalysis (J. J. Burton and K. L. Garten, eds.), Academic Press, London, 1977, pp. 293-324.
2. L. D. Pfefferle and W. C. Pfefferle, Catalysis in combustion, Catal. Rev. Sci. Eng., 29(2-3), 219-267 (1987).
3. R. Prasad, L. A. Kennedy, and E. Ruckenstein, Catalytic combustion, Catal. Rev.-Sci. Eng., 26(1), 1-58 (1984).
4. D. L. Trimm, Catalytic Combustion, Appl. Catal., 7, 249-282 (1983).
5. S. Irandoust and B. Andersson, Monolithic catalysts for nonautomobile applications, Catal. Rev.-Sci. Eng., 50(3), 341-392 (1988).
6. L. L. Johnson, W. C. Johnson, and D. L. O’Brien, The use of structural ceramics in automobile exhaust converters, Chem. Eng. Progr., Symp. Ser., 35, 55-67 (1961).
7. H. C. Anderson, W. J. Green, and P. L. Romeo, A New Family of Catalysts for Nitric Acid Tail Gases, Engelhard Industries Inc., Techn. Bull. 7, 1966, p. 100.
8. C. Keith, P. Kenah, and D. Bair, A catalyst for oxidation of automobile and industrial fumes, US Pat. 3, 565, 830 (1971).
9. C. Keith, T. Schreuders, and C. Cunningham, Purifying exhaust gases of an internal combustion engine, US Pat. 3, 441, 381 (1969).
10. M. Barto and I. Hyanek, Automobile catalysts and dynamics of co oxidation in monoliths, Ropa a Uhlie, 31, 269-283 (1989).
11. M. Flytzani-Stephanopoulos and G. E. Voecks, Conversion of hydrocarbons for fuel cell applications, Final Report to DOE, DOE/ET-11326, Jet Propulsion Laboratory Publ. 82-37, Pasadena, CA, 1980.
12. M. Flytzani-Stephanopoulos and G. E. Voecks, Autothermal reforming of n-tetradecane and benzene solutions of naphthalene on pellet catalysts, and steam reforming of n-hexane on pellet and monolithic catalyst beds, Final Report to DOE, DE-AI03-78ET-11326, October 1980.
13. R. Brand, B. H. Engler, and E. Koberstein, Potential applications of monoliths in heterogeneous catalysts, paper presented at Roermond International Conference on Catalysis, June 1990.
14. I. M. Lachman and R. N. McNally, Monolithic honeycomb supports for catalysis, Chem. Eng. Progr., 81(Jan.), 29-31 (1985).
15. L. L. Hegedus and C. J. Pereira, Reaction engineering for catalyst design, Chem. Eng. Sci., 45(8), 2027-2044 (1990).
16. L. L. Hegedus, Catalysts pore structures by constrained nonlinear optimization, Ind. Eng. Chem. Prod. Res. Dev., 19, 533-537 (1980).
17. C. J. Pereira, G. Kim, and L. L. Hegedus, A novel catalyst geometry for automobile emission control, Catal. Rev.-Sci. Eng., 26(3-4), 503-523 (1984).
18. C. J. Pereira, J. E. Kubsh, and L. L. Hegedus, Computer-aided design of catalytic monoliths for automobile emission control, Chem. Eng. Sci., 43(8), 2087-2094 (1988).
19. T. S. Erwijn, Catalytic Monoliths, Techn. Univ. Delft, Internal Report, May 1991.
20. R. D. Hawthorn, Afterburner Catalysis-effects of heat and mass transfer between gas and catalyst surface, Shell Development Co., Rept. p-2121, Emeryville, USA; AIChE Symp. Ser., 70(137), 428-438 (1974).
21. R. K. Shah and A. L. London, Laminar flow forced convection heat transfer and flow friction in straight and curved ducts-a summary of analytical solutions, Techn. Rep. No. 75, Dept. Mechn. Eng., Stanford Univ., Stanford, CA, 1971.
22. L. C. Young and B. A. Finlayson, Mathematical models of the monolith catalytic converter. Part. II. Application to automobile exhaust, Alchej, 22(2), 344-353 (1976).
23. J. R. Sellars, M. Tribus, and J. S. Klein, Trans. ASME, 78, 441 (1956).
24. L. L. Hegedus, Effects of channel geometry on the performance of catalytic monoliths, Am. Chem. Soc. Div. Petroleum. Chem., Prepr. Symp. Catalytic Approaches to Environm. Control, Chicago Meeting, August 26-31, 1973, Vol. 18, pp. 487-503.
25. S. T. Gulati, Paper 750171, SAE Automotive Engineering Congress, Detroit, February 1975.
26. J. S. Howitt, Thin wall ceramics as monolithic catalyst supports, SAE Paper 800082, Automotive Engineering Congress, Detroit, February 1980.
27. J. Wei, The catalytic muffler, Proc. 3rd Int. Symp. Chem. React. Eng., Evanston, 1974, pp. 1-25.
28. L. L. Hegedus and J. J. Gumbleton, Catalysts, Computers, and Cars: A Growing Symbiosis, Chemtech, 1980, pp. 630-642.
29. K. C. Taylor, Automobile catalytic converters, in Catalysis, Science and Technology, Vol. 1, 1982, pp. 119-170.
30. M. A. M. Boersma, W. H. M. Thielen, and H. S. Van den Baan, Experimental and theoretical study of the simultaneous development of the velocity and concentration profiles in the entrance region of a monolithic converter, Proc. 5th Int. Symp. Chem. React. Eng., Houston, 1978, pp. 72-82.
31. E. Zabar and M. Sheintuch, Optimization of an autotermal monolithic re- actor-heat exchanger for so2 oxidation over platinum, Chem. Eng. ComMun., 16, 313-323 (1982).
32. B. Bernauer, A. Simecek, and J. Vosolsobe, Kinetics of oxidation of ammonia on cobalt catalyst. I. Model of the reactor with catalytically active wall, Collect. Czechoslovak. Chem. Commun., 47, 2087-2096 (1982).
33. B. Bernauer, A. Simecek, and J. Vosolsobe, Kinetics of oxidation of ammonia on cobalt catalyst. II. Application of tubular reactor with catalytically active wall, Collect. Czechoslovak. Chem. Commun., 47, 2097-2109 (1982).
34. P. Subbana, H. Greene, and F. Desai, Catalytic oxidation of polychlorinated biphenyls in a monolithic reactor system, Environ. Sci. Technol., 22, 557-561 (1988).
35. L. E. Campbell, Comparison of monolithic versus particulate reactor designs for the cracking of cumene and the dehydration of ethanol, presented at the Spring Symposium of the Philadelphia Catalysis Club, May 7, 1974.
36. J. S. Howitt and T. C. Sekella, Flow effects in monolithic honeycomb automotive catalytic converters, SAE Paper No. 740 244, Automotive Engineering Congress, Detroit, MI, 1974.
37. J. Williams, I. Lachman, and T. Rosenbusch, paper presented at the 192nd Natl. Meeting of ACS, Anaheim, 1986.
38. J. L. Williams and I. M. Lachman, Selective catalytic reduction of NOx over catalytically active cellular ceramics, Proc. 8th World Clear Air Congress, The Hague, September 1989, Vol. 4, pp. 351-356.
39. C. H. Bartholomew, Reduction of nitric oxide by monolithic-supported palladium-nickel and palladium-ruthenium alloys, Ind. Eng. Chem. Prod. Res. Dev., 14(1), 29-33 (1975).
40. M. A. Buzanowski and R. T. Yang, Simple design of monolith reactor for selective catalytic reduction of NO for power plant emission control, Ind. Eng. Chem. Res., 29, 2074-2078 (1990).
41. E. R. Tucci and W. J. Thomson, Monolith catalyst favored for methanation, Hydrocarbon Processing, February 1979, pp. 123-126.
42. G. A. Jarvi, K. B. Mayo, and C. H. Bartholomew, Monolithic-supported nickel catalysts. I. Methanation activity relative to pellet catalysts, Chem. Eng. Commun., 4, 325-341 (1980).
43. E. L. Sughrue and C. H. Bartholomew, Kinetics of carbon monoxide methanation on nickel monolithic catalysts, Appl. Catal., 2, 239-256 (1982).
44. E. W. De Bruijn, W. A. De Jong, and C. J. Van der Spiegel, Methanation in a parallel passage reactor, Proc. 5th Int. Symp. Chem. React. Eng., Houston, 1978, pp. 63-71.
45. A. Parmaliana, C. Crisafulli, R. Maggiore, J. C. J. Bart, and N. Giordano, Catalytic activity of honeycomb catalysts. I. The benzene-cyclohexane (de)hydrogenation reaction, React. Kinet. Catal. Lett., 18(3-4), 295-299 (1981).
46. A. Parmaliana, A. Mezzapica, C. Crosafulli, S. Galvagno, R. Maggiore, and N. Giordano, Benzene hydrogenation on nickel/honeycomb catalysts, React. Kinet. Catal. Lett., 19(1-2), 155-160 (1982).
47. A. Parmaliana, M. El Sawi, G. Mento, U. Fedele, and N. Giordano, A kinetic study of the hydrogenation of benzene over monolithic-supported platinum catalyst, Appl. Catal., 7, 221-232 (1983).
48. A. Parmaliana, M. El Sawi, U. Fedele, G. Giordano, F. Frusteri, G. Mento, and N. Giordano, A kinetic study of low temperature hydrogenation of benzene over monolithic-supported platinum catalyst, Appl. Catal., 12, 4957 (1984).
49. V. Hatziantoniou and B. Andersson, The segmented two-phase flow monolithic catalyst reactor. An alternative for liquid-phase hydrogenations, Ind. Eng. Chem. Fundam., 23, 82-88 (1984).
50. V. Hatziantoniou, B. Andersson, and N.-H. Schoon, Mass transfer and selectivity in liquid-phase hydrogenation of nitro-compounds in a monolithic catalyst reactor with segmented gas-liquid flow, Ind. Eng. Chem. Process Des. Dev., 25, 964-970 (1986).
51. S. Irandoust and B. Andersson, Mass transfer and liquid-phase reactions in a segmented two-phase flow monolithic catalyst reactor, Chem. Eng. Sci., 9(8), 1983-1988 (1988).
52. S. Irandoust, B. Andersson, E. Bengtsson, and M. Silverstrom, Scaling up of a monolithic catalyst reactor with two-phase flow, Ind. Eng. Chem. Res., 1489-1494 (1989).
53. S. Irandoust and O. Gahne, Competitive hydrodesulfurization and hydrogenation in a monolithic reactor (Hydrogenolysis in a monolithic catalyst reactor), Aiche J., 36(5), 746-752 (1990).
54. R. Edvinsson and S. Irandoust, Hydrodesulfurization of dibenzothiophene in a monolithic catalyst reactor, Ind. Eng. Chem. Res., 32, 391-395 (1993).
55. D. S. Soni and B. L. Crynes, A comparison of the hydrodesulfurization and hydrodenitrogenation activities of monolith alumina impregnated with cobalt and molybdenum and a commercial catalyst, ACS Symp. Ser., 156, 207-224 (1981).
56. I. Mazzarino and G. Baldi, Liquid phase hydrogenation on a monolithic catalyst, in Recent Trends in Chemical Reaction Engineering (B. D. Kulkarni, R. A. Mashelkar, and M. M. Sharma, eds.), Wiley Eastern Ltd., New Delhi, 1987, Vol. 2, pp. 181-189.
57. T. Das, A. Cybulski, and J. Moulijn, unpublished works of TU Delft, 1991.
58. G. Eigenberger and U. Nieken, Katalytische Abluftreinigung: Verfahrenstechnische Aufgaben und neue Losungen, Chem.-Ing.-Techn., 63, 781-791 (1991).
59. C. D. Lemme and W. R. Givens, Soc. Auto Eng., Paper 740243, 1974.
60. A. S. Pratt and J. A. Cairns, Noble metal catalysts on metallic substrates, Plat. Met. Rev., 21, 74-83 (1977).
61. B. E. Zemke and J. J. Gumbleton, Paper 800398, Soc. Auto Eng., February 1980.
62. R. E. Kenson, Catalytic incineration in cogeneration systems, Chem. Eng. Progr., 81, 57-62 (1985).
63. B. De Biasi, Johnson Matthey Cogeneration, July-August 1984, p. 21.
64. J. W. Beeckman and L. L. Hegedus, Design of monolith catalyst for power plant NOx emission control, paper presented at the Annual Meeting of the AIChE, Washington, DC, 1988, paper 72e.
65. H. G. Stenger, Jr., E. C. Meyer, J. S. Hepburn, and C. E. Lyman, Nitric oxide reduction using co-impregnated rhodium on alumina celcor honeycomb, Chem. Eng. Sci., 43, 2067-2072 (1988).
66. H. Bosch and F. J. J. G. Janssen, Formation and control of nitrogen oxides, Catal. Today, 2, 369-379 (1988).
67. Z. R. Ismagilov and M. A. Kerzhentsev, Catalytic fuel combustion-A way of reducing emission of nitrogen oxides, Catal. Rev.-Sci. Eng., 32(1-2), 51-103 (1990).
68. Kraftanlagen Heidelberg, Comprehensive activities in the engineering and installation of efficient energy systems, Leaflet 2016/3.0/8.90/Br, 1990.
69. Kraftanlagen Heidelberg, Ljungstrdm-Gasvorwarmer filr DeNOx-Anlagen, Bauart Kraftanlagen Heidelberg, Technical Information, 1991.
70. K. Veser and H. Miiller-Odenwald, Operating experience gathered with the catalyst-equipped air preheater, VGB Kraftwerkstechnik, 70(3), 183-187 (1990).
71. G. Parkinson, Catalytic burning tries for NOx control jobs, Chem. Eng., June 15, 1981, pp. 51-54.
72. B. E. Enga and D. T. Thompson, Catalytic combusion applied to gas turbine technology, Plat. Met. Rev., 23, 134-141 (1979).
73. W. S. Blazowski and D. E. Walsh, Catalytic combustion: An important consideration for future application, Combust. Sci. Technol., 10, 233-242 (1975).
74. S. M. De Corso, S. Mumbord, R. Carrubba, and R. Heck, Catalysts for gas turbine combustors-Experimental test results, ASME Paper 76-GT-4, 1976.
75. J. P. Kesselring, W. V. Krill, and M. J. Angewin, Development of improved catalyst systems, presented at 4th Workshop on Catalytic Combustion, Cincinnati, OH, May 1980.
76. W. V. Krill, J. P. Kesselring, and S. J. Anderson, Prototype catalytic systems, presented at 4th Workshop on Catalytic Combustion, Cincinnati, OH, May 1980.
77. W. C. Pfefferle, R. V. Carrubba, R. M. Heck, and G. W. Roberts, Catathermal combustion: A new process for low-emissions fuel conversion, ASME Paper 75-WA/FU, 1975.
78. W. J. Dodds, Demonstration of catalytic combustion with residual fuel, presented at 5th Workshop on Catalytic Combustion, San Antonio, TX, September 15-16, 1981.
79. J. T. Pogson and M. N. Mansour, No. 6 fuel oil catalytic combustion, presented at Third Meeting Catalytic Combustion, Asheville, NC, October 3 1979.
80. T. J. Rosiford, Catalytic combustion with incompletely vaporized residual fuel, NASA CR-165161, March 1981.
81. E. R. Tucci, Use of catalytic combustion for LHV gases, Hydrocarbon Processing, March 1982, pp. 159-166.
82. J. A. Latty, Fuel admixture for a catalytic combustion, Canadian Pat. 1, 188, 516 (1985); Combustor and fluid for producing a heated fluid, Brit. Pat., 2, 107, 837 (1985).
83. M. A. M. Boersma, J. A. M. Spierts, W. J. G. van Lith, and H. S. Van der Baan, The oxidation of ethene in an empty and packed tubular wall reactor operating in the reaction- and diffusion-controlled regimes, Chem. Eng. J. (Lausanne), 20, 177-183 (1980).
84. S. Kim, Y. T. Shah, R. L. Cerro, and M. A. Abraham, Aqueous phase reactor operating in the reaction- and diffusion-controlled regimes, Chem. Eng. J. (Lausanne), 20, 177-183 (1980). oxidation of phenol in a monolithic reactor, AIChE Ann. Meeting, Miami Beach, December 1992.
85. L. C. Young and B. A. Finlayson, Mathematical models of the monolith catalytic converter. Part I. Development of the model and application of orthogonal collocation, AIChE J., 22(2), 331-342 (1976).
86. N. B. Ferguson and D. A. Finlayson, Transient modelling of a catalytic converter to reduce nitric oxide in automobile exhaust, AIChE J., 20, 539-550 (1974).
87. L. C. Young, The application of orthogonal collocation to laminar flow, heat and mass transfer in monolith converters, Ph.D. thesis, Univ. Wash., Seattle, 1974.
88. T. F. Degnan, Jr. and J. Wei, Monolithic reactor-heat exchanger, Proc. 5th Int. Symp. Chem. React. Eng., Houston, 1978, pp. 87-97.
89. T. F. Degnan and J. Wei, The co-current reactor-heat-exchanger. Part I. Theory, AIChE J., 25(2), 338-344 (1979).
90. T. F. Degnan and J. Wei, The co-current reactor-heat exchanger. Part II. Experimental Results, AIChE J., 26(1), 60-67 (1980).
91. D. W. Wendland, The segmented oxidizing monolith catalytic converter. Theory and performance, Trans. ASME, 102, 194-198 (1980).
92. K. Doory, B. E. Said, U. Ullah, and S. P. Waldram, The design and development of an active transport catalytic reactor, I. Chem. E. Symp. Ser., 121, 425-429 (1990).
93. R. B. Bird, W. E. Stewart, and E. N. Lightfoot, Transport phenomena, Wiley, New York, 1960.
94. J. D. Parker, J. H. Boggs, and E. F. Blick, Introduction to Fluid Mechanics and Heat Transfer, Addison-Wesley, Reading, MA, 1969.
95. A. H. P. Skelland, Diffusional Mass Transfer, Wiley, New York, 1974.
96. W. M. Kays and A. L. London, Compact Heat Exchangers, 2nd ed., McGraw- Hill, New York, 1964.
97. J. Votruba, O. Mikus, Khue Nguen, V. Hlavacek, and J. Skrivanek, Heat and mass transfer in honeycomb catalysts-II, Chem. Eng. Sci., 30, 201-206 (1975).
98. C. J. Bennett, S. T. Kolaczkowski, and W. J. Thomas, Determination of heterogeneous reaction kinetics and reaction rates under mass transfer controlled conditions for a monolith reactor, Trans. I. Chem. Engr., 69, Part B, 209-220 (1991).
99. R. H. Heck, J. Wei, and J. R. Katzer, The transient response of a monolithic catalyst support, Proc. 3rd Int. Symp. Chem. React. Eng., Evanston, 1974, pp. 34-45.
100. R. H. Heck, J. Wei, and J. R. Katzer, Mathematical modeling of monolithic catalysts, AIChE J., 22(3), 477-484 (1976).
101. M. Flytzani-Stephanopoulos, G. E. Voecks, and T. Charng, Modelling of heat transfer in non-adiabatic monolith reactors and experimental comparisons of metal monoliths with packed beds, Chem. Eng. Sci., 41(5), 1203-1212 (1986).
102. S. T. Kolaczkowski, P. Crumpton, R. P. J. Lee, and A. Spence, Channel interaction in a non-adiabatic monolithic reactor, Chem. Eng. J. (Lausanne), 167-173 (1989).
103. S. T. Kolaczkowski, P. Crumpton, and A. Spence, Modelling of heat transfer in non-adiabatic monolithic reactors, Chem. Eng. Sci., 43(2), 227-231 (1988).
104. A. Cybulski and J. A. Moulijn, Modelling of heat transfer in metallic monoliths consisting of sinusoidal cells, Chem. Eng. Sci., 49(1), 19-27 (1994).
105. J. J. Carberry and A. A. Kulkarni, The non-isothermal catalytic effectiveness factor for monolith supported catalysts, J. Catal., 31, 41-50 (1973).
106. S. E. Voltz, C. R. Morgan, D. Liederman, and S. M. Jacob, Kinetic study of carbon monoxide and propylene oxidation on platinum catalysts, Ind. Eng. Chem. Proc. Res. Dev., 12(4), 294-301 (1973).
107. C. N. Satterfield, Mass Transfer in Heterogeneous Catalysis, MIT Press, Cambridge, MA, 1970.
108. G. F. Froment and K. B. Bischoff, Chemical Reactor Analysis and Design, Wiley, New York, 1990.
109. J. M. Smith, Chemical Engineering Kinetics, 2nd ed., McGraw-Hill, New York, 1970.
110. P. Trambouze, H. van Landeghem, and J. P. Wauquier, Chemical Reactors (design, engineering, operation), Gulf Publ. Co., Houston, TX, 1988.
111. K. R. Westerterp, W. P. M. van Swaaij, and A. A. C. M. Beenackers, Chemical Reactor Design and Operation, Wiley, Chichester, 1990.
112. U. Ullah, S. P. Waldram, C. J. Bennett, and T. Truex, Monolithic reactors: Mass transfer measurements under reacting conditions, Chem. Eng. Sci., 47(9-11), 2413-2418 (1992).
113. G. I. Taylor, Dispersion of soluble matter in solvent flowing slowly through a tube, Proc. Roy. Soc., A219, 186 (1953).
114. G. I. Taylor, The dispersion of matter in turbulent flow through a pipe, Proc. Roy. Soc., A223, 446 (1954).
115. L. L. Hegedus, Temperature excursions in catalytic monoliths, AIChE J., 21(5), 849-853 (1975).
116. L. C. Young and B. A. Finlayson, Mathematical modeling of the monolithic catalyst reactor converter, Proc. 3rd Int. Symp. Chem. React. Eng., Evanston, 1974, pp. 629-643.
117. S. M. Senkan, L. B. Evans, and J. B. Howard, An analysis of wall-supported catalyst structures, Ind. Eng. Chem. Process Des. Dev., 18(1), 125-130 (1979).
118. C. Trevino and M. Sen, Catalytic combustion in monolithic reactors, Chem. Eng. Sci., 41(9), 2253-2260 (1986).
119. J. Votruba, J. Sinkule, V. Hlavacek, and J. Skrivanek, Heat and mass transfer in honeycomb catalysts-I, Chem. Eng. Sci., 30, 117-123 (1975).
120. J. G. Stevens and E. N. Ziegler, Effect of momentum transport on conversion in adiabatic catalytic tubular reactors, Chem. Eng. Sci., 32, 385-391 (1977).
121. H.-R. Stock and A. Lowe, Measurement and differential kinetic analysis of wall temperatures in monolith converters-I. Kinetic analysis, Chem. Eng. Sci., 38(7), 1039-1043 (1983).
122. A. Lowe and H.-R. Stock, Measurement and differential kinetic analysis of wall temperatures in monolith converters-II. Experimental investigations, Chem. Eng. Sci., 39(2), 227-233 (1984).
123. B. A. Finlayson, Hysteresis and multiplicity in wall-catalyzed reactors, Proc. 5th Int. Symp. Chem. React. Eng., Houston, 1978, pp. 98-109.
124. B. A. Finlayson and L. C. Young, Mathematical models of the monolith catalytic converter. Part III. Hysteresis in carbon monoxide reactor, AIChE J., 25(1), 192-196 (1979).
125. K. Zygourakis and R. Aris, Multiple oxidation reactions and diffusion in the catalytic layer of monolith reactors, Chem. Eng. Sci., 38(5), 733-744 (1983).
126. V. Hlavacek, Nguen Khue, J. Sinkule, J. Skrivanek, and J. Votruba, Experimental study and mathematical modeling of monolithic convertors, in Chem. React. Eng., Heidelberg, 1976, pp. VI240-VI249.
127. S. T. Lee and R. Aris, On the effects of radiative heat transfer in monoliths, Chem. Eng. Sci., 32, 827-837 (1977).
128. S. H. Oh and J. C. Cavendish, Transients of monolithic catalytic converters: Response to step changes in feedstream temperature as related to controlling automobile emissions, Ind. Eng. Chem. Prod. Res. Dev., 21, 29-37 (1982).
129. S. H. Oh and J. C. Cavendish, Design aspects of poison-resistant automobile monolithic catalysts, Ind. Eng. Chem. Prod. Res. Dev., 22, 509-518 (1983).
130. K. Zygourakis, Transient operation of monolith catalytic converters: A twodimensional reactor model and the effects of radially nonuniform flow distributions, Chem. Eng. Sci., 44(9), 2075-2086 (1989).
131. S. T. Lee and R. Aris, Poisoning in monolithic catalysts, Proc. 5th Int. Symp. Chem. React. Eng., Houston, 1978, pp. 110-121.
132. R. E. Hayes, S. T. Kolaczkowski, and W. J. Thomas, Finite-element model for a catalytic monolith reactor, Computers Chem. Eng., 16(1), 645-657 (1992).
133. J. S. T’ien, Catalytic honeycomb combustor: Steady-state model and comparison with experiment, J. Energy, 5(4), 201-207 (1981).
134. O. Bensalem and W. R. Ernst, Mathematical modeling of homogeneous- heterogeneous reactions in monolithic catalysts, Combust. Sci. Technol, 29, 1-13 (1982).
135. A. E. Cerkanowicz, R. B. Cole, and J. G. Stevens, Catalytic combustion modeling: Comparisons with experimental data, J. Eng. Power, 99A, 593-600 (1977).
136. C. M. Ablow and H. Wise, Theoretical analysis of catalytic combustion in a monolith reactor, Combust. Sci. Technol., 21, 35-42 (1979).
137. B. K. Harrison and W. R. Ernst, Catalytic combustion in cylindrical channels: A homogeneous-heterogeneous model, Combust. Sci. Technol., 19, 31-38 (1978).
138. J. T. Kelly, R. M. Kendall, E. Chu, and J. P. Kesselring, Development and application of the Prof Het catalytic combustor code, WSS/Combustion Institute Paper 77-33.
139. J. S. T’ien, Transient catalytic combustor model, Final report (Case Western Reserve Univ.), DQE/NASA/3230-1, NASA CR-165324, May 1981.
140. R. Prasad, L. A. Kennedy, and E. Ruckenstein, A model for the transient behavior of catalytic combustors, Combust. Sci. Technol., 30, 59-88 (1983).
141. T. Ahn, W. V. Pinczewski, and D. L. Trimm, Transient performance of catalytic combustors for gas turbine applications, Chem. Eng. Sci., 41(1), 55-64 (1986).
142. F. V. Bracco, C. Bruno, Y. Yaw, and P. M. Walsh, Computed and measured emissions from the catalytic combustion of propane/air mixtures, 4th Workshop on Catalytic Combustion of Propane/Air Mixtures, Cincinnati, OH, May 14-15, 1980.
143. C. Bruno, P. M. Walsh, D. A. Santovica, N. Sinha, Y. Yaw, and F. V. Bracco, Catalytic combustion of propane/air mixtures on platinum, Combust. Sci. Technol., 31, 43-74 (1983).
144. J. Sinkule and V. Hlavacek, Heat and mass transfer in monolithic honeycomb catalysts-III. Radiation model., Chem. Eng. Sci., 33, 839-845 (1978).
145. L. L. Hegedus and K. Baron, Phosphorus accumulation in automotive catalysts, J. Catal., 54, 115-119 (1978).
146. B. Angele, K. Kirchner, and E. G. Schlosser, The poisoning of noble metal catalysts by phosphorus compounds-II. The kinetics of poisoning and a mathematical model, Chem. Eng. Sci., 35, 2093-2099 (1980).
147. L. L. Hegedus and J. C. Summers, Improving the poison resistance of supported catalysts, J. Catalysis, 48, 345-353 (1977).
148. L. L. Hegedus, J. C. Summers, J. C. Schkatter, and K. Baron, Poison- resistant catalysts for the simultaneous control of hydrocarbon monoxide and nitrogen oxide emissions, J. Catal., 56, 321-335 (1979).
149. G. Kim, M. V. Ernest, and S. R. Montgomery, Deactivation of pelleted three-way catalyst, post-mortem studies, Ind. Eng. Chem. Prod. Res. Dev., 525-531 (1984).
150. J. S. T’ien, Transient catalytic combustor model, Combust. Sci. Technol., 65-75 (1981).
151. G. J. Heynderickx, G. F. Froment, P. S. Broutin, C. R. Busson, and J. E. Weill, Modeling and simulation of a honeycomb reactor for high-severity thermal cracking, AIChE J., 37(9), 1354-1364 (1991).
152. Y. Taitel, D. Bornea, and A. E. Dukler, Modelling flow pattern transitions for steady upward gas-liquid, AIChE J., 26, 345-354 (1980).
153. C. N. Satterfield and F. Ozel, Some characteristics of two-phase flow in monolithic catalyst structures, Ind. Eng. Chem. Fundam., 16, 61-66 (1977).
154. F. P. Bretherton, J. Fluid Mech., 10, 166 (1961).
155. F. Fairbrother and A. E. Stubbs, Electroendosmosis. VI. The Bubble-tube method of measurement, J. Chem. Soc., 1, 527 (1935).
156. V. Hatziantoniou and B. Andersson, Solid-liquid mass transfer in segmented gas-liquid flow through a capillary, Ind. Eng. Chem. Fundam., 21, 451-456 (1982).
157. R. Clift, J. R. Grace, and M. E. Weber, Bubbles, Drops and Particles, Academic Press, New York, 1978.
158. S. Irandoust and B. Andersson, Liquid-film in Taylor flow through a capillary, Ind. Eng. Chem. Res., 28(11), 1684-1688 (1989).
159. S. Irandoust, S. Ertle, and B. Andersson, Gas-liquid mass transfer in Taylor flow through a capillary, Can. J. Chem. Eng., 70, 115-119 (1992).
160. J. R. F. Guedes de Carvalho, S. S. S. Cardoso, and J. A. S. Teixeira, Axial mixing in slug flow. The use of injected air to reduce Taylor dispersion in a flowing liquid, Trans. Inst. Chem. Eng., 71, Part A, 28-37 (1993).
161. H. Pedersen and C. Horvath, Axial dispersion of a segmented gas-liquid flow, Ind. Eng. Chem. Fundam., 20, 181-186 (1981).
162. S. Irandoust and B. Andersson, Simulation of flow and mass transfer in Taylor flow through a capillary, Comput. Chem. Eng., 73(4-5), 519-526 (1989).
163. A. Cybulski, R. Edvinsson, S. Irandoust, and B. Andersson, Liquid phase methanol synthesis: Modeling of monolithic reactor, Chem. Eng. Sci., 48(20), 3463-3478 (1993).
164. N.-H. Schoon, Recent progress in liquid-phase hydrogenation (with aspects from macrokinetics to reactor design), Invited lecture at 6th Natl. Symp. Chem. React. Eng., Warsaw, September 1989.