Review of parity space approaches to fault diagnosis for aerospace systems

Journal of Guidance, Control, and Dynamics

Volumn 17, Issue 2, 1994, Pages 278-285

  Patton, R J ^a   Ghen, J ^a  

^a UNIVERSITY OF YORK   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

AEROSPACE APPLICATIONS; COMPUTER SYSTEMS; CONTROL SYSTEM SYNTHESIS; ROBUSTNESS (CONTROL SYSTEMS);

FAULT DIAGNOSIS; PARITY SPACE; RESIDUAL GENERATION;

FAILURE ANALYSIS;

EID: 0028384958     PISSN: 07315090     EISSN: None     Source Type: Journal    
DOI: 10.2514/3.21194     Document Type: Article

References (38)

1. Willsky, A. S., “A Survey of Design Methods for Failure Detection in Dynamic Systems,” Automatica, Vol. 12, 1976, pp. 601-611.
2. Basseville, M., “Detecting Changes in Signals and Systems—A Survey,” Automatica, Vol. 24, No. 3, 1988, pp. 309-326.
3. Patton, R. J., Frank, P. M., and Clark, R. N. (eds.), Fault Diagnosis in Dynamic Systems, Theory and Application, Control Engineering Series, Prentice-Hall, Englewood Cliffs, NJ, 1989.
4. Handelman, D. A., and Stengel, R. F., “Combining Expert System and Analytical Redundancy Concepts for Fault-Tolerant Flight Control,” Journal of Guidance, Control, and Dynamics, Vol. 12, No. 1, 1989, pp. 39-45.
5. Merrill, W. C., “Sensor Failure Detection for Jet Engines,” Control and Dynamic Systems—Advances in Aerospace Systems Dynamics and Control Systems, Vol. 33, Academic Press, New York, 1990, pp. 1-34.
6. Napolitano, M. R., and Swaim, R. L., “New Technique for Aircraft Flight Control Reconfiguration,” Journal of Guidance, Control, and Dynamics, Vol. 14, No. 1, 1991, pp. 184-190.
7. Frank, P. M., “Fault Diagnosis in Dynamic System using Analytical and Knowledge-based Redundancy—A Survey and Some New Results,” Automatica, Vol. 26, No. 3, 1990, pp. 459-474.
8. Patton, R. J., “Fault Detection and Diagnosis in Aerospace Systems using Analytical Redundancy,” IEEE Computing and Control Engineering Journal, Vol. 2, No. 3, 1991, pp. 459-474.
9. Gertler, J., “Analytical Redundancy Methods in Failure Detection and Isolation,” Proceedings of the IFAC/IMACS Symposium SAFE-PROCESS’91 (Baden-Baden, Germany), Vol. 1, Pergamon Press, 1991, pp. 9-21.
10. Patton, R. J., and Chen, J., “Robustness in Model-based Fault Diagnosis,” Concise Encyclopedia of Simulation and Modelling, edited by D. Atherton and P. Borne, Pergamon, Oxford, England, UK, 1992, pp. 379-392.
11. Frank, P. M., “Fault Diagnosis in Dynamic System via State Estimation—A Survey,” System Fault Diagnostics, Reliability and Related Knowledge-based Approaches, edited by S. Tzafestas, M. Singh, and G. Schmidt, Vol. 1, D. Reidel Press, Dordrecht, The Netherlands, 1987, pp. 35-98.
12. Beard, R. V., “Failure Accommodation in Linear Systems Through Self-Reorganization,” Ph.D. Dissertation, Massachusetts Inst, of Technology, Cambridge, MA, 1971.
13. Jones, FI. L., “Failure Detection in Linear Systems,” MIT Ph.D. Dissertation, Massachusetts Inst, of Technology, Cambridge, MA, 1973.
14. Massoumnia, M. A., and Vander Velde, W. E., “Generating Parity Relations for Detecting and Identifying Control System Component Failures,” Journal of Guidance, Control, and Dynamics, Vol. 11, No. 1, 1988, pp. 60-65.
15. Viswanadham, N., Srichander, R., “Fault Detection using Unknown Input Observers,” Control Theory and Advanced Technology, Vol. 3, June 1987, pp. 91-101.
16. Frank, P. M., and Wiinnenberg, J., “Robust Fault Diagnosis using Unknown Input Schemes,” Fault Diagnoisis in Dynamic Systems, Theory and Application, edited by R. J. Patton, P. M. Frank, and R. N. Clark, Control Engineering Series, Prentice-Hall, Englewood Cliffs, NJ, 1989, Chap. 3, pp. 47-98.
17. Patton, R. J., Willcox, S. W., and Winter, J. S., “A Parameter Insensitive Technique for Aircraft Sensor Fault Analysis,” Journal of Guidance, Control, and Dynamics, Vol. 10, No. 4, 1987, pp. 359-367.
18. Patton, R. J., and Kangethe, S. M., “Robust Fault Diagnosis using Eigenstructure Assignment of Observers,” Fault Diagnoisis in Dynamic Systems, Theory and Application, edited by R. J. Patton, P. M. Frank, and R. N. Clark, Control Engineering Series, Prentice-Hall, Englewood Cliffs, NJ, 1989, Chap. 3, pp. 99-154.
19. Mehra, R. K., and Peschon, J., “An Innovations Approach to Fault Detection and Diagnosis in Dynamic Systems,” Automatica, Vol. 7, 1971, pp. 637-640.
20. Ray, A., and Luck, R., “An Introduction to Sensor Signal Validation in Redundant Measurement Systems,” IEEE Control Systems Magazine, Vol. 11, No. 2, 1991, pp. 44-49.
21. Chow, E. Y., and Willsky, A. S., “Analytical Redundancy and the Design of Robust Detection Systems,” IEEE Transactions on Automatic Control, Vol. AC-29, No. 7, 1984, pp. 603-614.
22. Lou, X., Willsky, A. S., and Verghese, G. C., “Optimally Robust Redundancy Relations for Failure Detection in Uncertain Systems,” Automatica, Vol. 22, No. 3, 1986, pp. 333-344.
23. Mironovski, L. A., “Functional Diagnosis of Dynamic System— A Survey,” Automation Remote Control, Vol. 41, 1980, pp. 1122-1143.
24. Massoumnia, M. A., “A Geometric Approach to Failure Detection and Identification in Linear Systems,” Ph.D. Dissertation, Dept, of Aeronautics and Astronautics, Massachusetts Inst, of Technology, Cambridge, MA, 1986.
25. Patton, R. J., and Chen, J., “A Re-Examination of the Relationship Between Parity Space and Observer-based Approaches in Fault Diagnosis,” European Journal of Diagnosis and Safety in Automation (Revue européenne Diagnostic et sûreté de fonctionnement), Hermes Press, Vol. 1, No. 2, 1991, pp. 183-200.
26. Gertler, J., “Survey of Model-Based Failure Detection and Isolation in Complex Plants,” IEEE Control Systems Magazine, Vol. 8, No. 6, 1988, pp. 3-11.
27. Gertler, J., and Singer, D., “A New Structural Framework for Parity Equation-based Failure Detection and Isolation,” Automatica, Vol. 26, No. 2, 1990, pp. 381-388.
28. Viswanadham, N., Taylor, J. H., and Luce, E. C., “A Frequency-Domain Approach to Failure Detection and Isolation with Application to GE-21 Turbine Engine Control Systems,” Control-Theory and Advanced Technology, Vol. 3, No. 1, 1987, pp. 45-72.
29. Viswanadham, N., and Minto, K. D., “Robust observer Design with Application to Fault Detection,” Proceedings of the 1988 American Control Conference (Atlanta, GA), Vol. 3, 1988, pp. 1393-1399.
30. Ding, X., and Frank, P. M., “Fault Detection via Factorization Approach,” Systems and Control Letters, Vol. 14, 1990, pp. 431-436.
31. Watanabe, K., and Himmelblau, D. M., “Instrument Fault Detection in Systems with Uncertainties,” International Journal of System Science, Vol. 13, No. 2, 1982, pp. 137-158.
32. Patton, R. J., and Chen, J., “Robust Fault Detection of Jet Engine Sensor Systems using Eigenstructure Assignment,” Journal of Guidance, Control, and Dynamics, Vol. 15, No. 6, 1992, pp. 1491-1497; also AIAA Paper 91-2797.
33. Patton, R. J., and Chen, J., “Optimal Selection of Unknown Input Distribution Matrix in the Design of Robust Observers for Fault Diagnosis,” Proceedings of the IFAC/IMACS Symposium SAFE-PROCESS’91 (Baden-Baden, Germany), Pergamon Press, 1991; also Automatica, Vol. 29, No. 4, 1993, pp. 837-841.
34. Frank, P.M., “Enhancement of Robustness in Observer-based Fault Detection,” Proceedings of the IFAC/IMACS Symposium SAFEPROCESS’91 (Baden-Baden, Germany), Pergamon Press, 1991.
35. Walker, B., “Fault Detection Threshold Determination using Markov Theory,” Fault Diagnoisis in Dynamic Systems, Theory and Application, edited by R. J. Patton, P. M. Frank, and R. N. Clark, Control Engineering Series, Prentice-Hall, Englewood Cliffs, NJ, 1989, Chap. 14, pp. 477-508.
36. Clark, R. N., “State Estimation Schemes for Instrument Fault Detection,” Fault Diagnosis in Dynamic Systems, Theory and Application, edited by R. J. Patton, P. M. Frank, and R. N. Clark, Control Engineering Series, Prentice-Hall, Englewood Cliffs, NJ, 1989, Chap. 2, pp. 21-45.
37. Emami-Naeini, A. E., Akhter, M. M., and Rock, S. M., “Effect of Model Uncertainty on Failure Detection: the Threshold Selector,” IEEE Transactions on Automatic Control, Vol. AC-33, No. 2, 1988, pp. 1106-1115.
38. Ding, X., and Frank, P. M., “Frequency Domain Approach and Threshold Selector for Robust Model-based Fault Detection and Isolation,” Proceedings of the IFAC/IMACS Symposium SAFEPROCESS’91 (Baden-Baden, Germany), Pergamon Press, 1991.