Human extenders

Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME

Volumn 115, Issue 2B, 1993, Pages 281-290

  Kazerooni, H ^a   Guo, Jenhwa ^b  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b NATIONAL TAIWAN UNIVERSITY   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

CONTROL SYSTEMS; DEGREES OF FREEDOM (MECHANICS); FORCE CONTROL; HUMAN ENGINEERING; HYDRAULIC CONTROL EQUIPMENT; MAN MACHINE SYSTEMS; MATHEMATICAL MODELS; SYSTEM STABILITY; TORQUE CONTROL;

HUMAN EXTENDERS; HYDRAULIC SIX DEGREE OF FREEDOM EXTENDER;

MANIPULATORS;

EID: 0027608183     PISSN: 00220434     EISSN: 15289028     Source Type: Journal    
DOI: 10.1115/1.2899068     Document Type: Article

References (101)

1. An, C. H., Atkeson, C. G., and Hollerbach, J. M., “Model-Based Control of Robot Manipulator,” MIT Press, 1988.
2. Asada, H., Slotine, J. E., “Robot Analysis and Control,” Wiley, New York, 1986.
3. Berthoz, A., Metral, S., “Behavior of Muscular Group Subjected to a Sinusoidal and Trapezoidal Variation of Force,” J. Of Applied Physiol., Vol. 29, pp. 378-384, 1970.
4. Clark, D. C., et al., “Exploratory Investigation of the Man-Amplifier Concept,” U.S. Air Force AMRL-TDR-62-89, AD-390070, Aug. 1962.
5. Cooke, J. D., “Dependence of Human Arm Movements in Limb Mechanical Properties,”’Brain Res., Vol. 165, pp. 366-369, 1979.
6. Cooke, J. D., “The Organization of Simple, Skilled Movements,” Tutorials in Motor Behavior, G. Stelmach and J. Requin, eds., Elsevier, Amsterdam, 1980.
7. Desoer, C. A., Vidyasagar, M., “Feedback Systems: Input-output Properties,” Academic Press, 1975.
8. Feldman, A. G., “Functional Tunning of the Nervous System With Control of Movement or Maintenance,” J. Of Biophysics, Vol. 11, pp. 565-578.
9. GE Company, “Exoskeleton Prototype Project, Final Report on Phase I,” Report S-67-1011, Schenectady, NY, 66.
10. GE Company, “Hardiman I Prototype Project, Special Interim Study,” Report S-68-1060, Schenectady, NY, 1968.
11. Groshaw, P. F., “Hardiman I Arm Test, Hardiman I Prototype,” Report S-70-1019, GE Company, Schenectady, NY, 1969.
12. Houk, J. C., “Neural Control of Muscle Length and Tension,” Motor Control, V. B. Brooks, ed., American Physiological Society Handbook of Physiology, Bethesda, MD.
13. Kazerooni, H., and Waibel, B. J., “On the Stability of the Constrained Robotic Maneuvers in the Presence of Modeling Uncertainties,” IEEE Transaction on Robotics and Automation, Vol. 7, No. 1, Feb. 1991.
14. Kazerooni, H., “Human-Robot Interaction via the Transfer of Power and Information Signals,” IEEE Transactions on Systems and Cybernetics, Vol. 20, No. 2, Mar. 1990.
15. Kazerooni, H., and Mahoney, S., “Dynamics and Control of Robotic Systems Worn By Humans,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 133, No. 3, Sept. 1991.
16. Kazerooni, H., Sheridan, T. B., and Houpt, P. K., “Fundamentals of Robust Compliant Motion for Manipulators,” IEEE Journal of Robotics and Automation, Vol. 2, No. 2, June 1986.
17. Kazerooni, H., Waibel, B. J., and Kim, S., “Theory and Experiments on Robot Compliant Motion Control,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 112, No. 3, Sept. 1990.
18. Kazerooni, H., “On the Contact Instability of the Robots When Constrained by Rigid Environments,” IEEE Transactions on Automatic Control, Vol. 35, No. 6, June 1990.
19. Marsden, C. D., Merton, P. A., and Morton, H. B., “Stretch Reflexes and Servo Actions in a Variety of Human Muscles,” Journal of Physiol, London, Vol. 259, pp. 531-560.
20. Makinson, B. J., “Research and Development Prototype for Machine Augmentation of Human Strength and Endurance, Hardiman I Project,” Report S-71-1056, GE Company, Schenectady, NY, 1971.
21. Merritt, H. E., “Hydraulic Control Systems,” John Wiley, 1967.
22. Mizen, N. J., “Preliminary Design for the Shoulders and Arms of a Powered, Exoskeletal Structure,” Cornell Aeronautical Laboratory, Report No. VO-1692-V-4, 1965.
23. Mosher, R. S., “Force Reflecting Electrohydraulic Servomanipulator,” Electro-Technology, pp. 138, Dec. 60.
24. Mosher, R. S., “Handyman to Hardiman,” SAE Report No. 670088.
25. Repperger, D. W., Morris, A., “Discriminant Analysis of Changes in Human Muscle Function When Interacting with an Assistive Aid,” IEEE Transaction on Biomedical Engineering, Vol. 35, No. 5, May 1988.
26. Sheridan, T. B., and Ferrell, W. R., Man-Machine Systems: Information, Control, and Decision, Model of Human Performance, MIT Press, 1974.
27. Stein, R. B., “What Muscles Variables Does the Nervous System Control in Limb Movements?,” J. Of the Behavioral and Brain Sciences, 1982, Vol. 5, pp. 535-577.
28. Spong, M. W., and Vidyasagar, M., “Robust Nonlinear Control of Robot Manipulators,” Proc. 24th IEEE CDC, Ft. Lauderdale, FL, Dec. 1985.
29. Astrom, K. J., and Wittenmark, B., 1984, Computer Controlled Systems, Prentice-Hall, New Jersey.
30. Bates, B., and Hardt, D. E., 1985, “A Real-Time Calibrated Thermal Model for Closed-Loop Weld Bead Geometry Control,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 107, p. 25.
31. Boo, K. S., and Cho, H. S., 1991, “A Fuzzy Linguistic Approach to Control of Welding Pool Size in Gas Metal Arc Welding Processes,” Welding and Joining Processes, ASME, PED, Vol. 51, pp. 73-84.
32. Box, G., and Kramer, T., 1990, “Statistical Process Control and Automatic Process Control—A Discussion,” Report #42, Center for Quality and Productivity Improvement, College of Engineering, Univ. Of Wisconsin, Madison, WI.
33. Cook, G. E., Andersen, K., and Barrett, R. J., 1990, “Feedback and Adaptive Control in Welding,” Proc. 2nd International Conference on Trends in Welding Research, Gatlinburg, May.
34. Deckard, C. R., 1989, “Method and Apparatus for Producing Parts by Selective Sintering,” U.S. Patent #4, 863, 538, Sept.
35. Doumanidis, C. C., and Hardt, D. E., 1989, “A Model for In-Process Control of Thermal Properties During Welding,” ASME Journal of Dynamic Systems, Measurement, and Control, Mar.
36. Doumanidis, C. C., and Hardt, D. E., 1991, “Multivariable Adaptive Control of Thermal Properties During Welding,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 113, Mar., pp. 82-92.
37. Eigen, G. F., 1992, “Smoothing Methods for Discrete Die Forming,” S.M. thesis, Dept, of Mechanical Engineering, MIT.
38. Fenn, R., and Hardt, D. E., 1992, “Real-Time Control of Sheet Stability During Forming,” to be published ASME Journal of Engineering for Industry, May 1993.
39. Goodwin, G. C., and Sin, K. S., 1984, Adaptive Filtering Prediction and Control, Prentice-Hall, New Jersey.
40. Hale, M. B., 1989, “Multivariable Dynamic Modeling and Control of GMAW Pool Geometry,” Ph.D thesis, Department of Mechanical Engineering, MIT.
41. Hale, M.B., and Hardt, D. E., 1990a, “Multivariable Geometry Control of Welding—Part I: Process Modeling,” Automation of Manufacturing Processes, ASME Winter Annual Meeting, DSC-Vol. 22, pp. 1-9.
42. Hale, M. B., and Hardt, D. E., 1990b, “Multivariable Geometry Control of Welding—Part II: Process Control,” Automation of Manufacturing Processes, ASME Winter Annual Meeting, DSC-Vol. 22, pp. 143-151.
43. Hardt, D. E., and Katz, J. M., 1984, “Ultrasonic Measurement of Weld Penetration,” Welding Journal, Sept., pp. 273-s—281-s.
44. Hardt, D. E., Garlow, D. A., and Weinert, J.B., 1985, “A Model of Full Penetration Arc Welding for Control System Design,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 107, pp. 40-46.
45. Hardt, D. E., Boyce, M. C., Ousterhout, K. B., Sim, H. B., and Karafillis, A., 1992, “A Flexible Forming System for Sheet Metal,” Proc. NSFConference on Design and Manufacturing Research, Atlanta, GA, Jan.
46. Hull, C. W., 1986, “Apparatus for Prediction of Three Dimensional Parts by Stereolithography,” U.S. Patent #4, 575, 330.
47. Karafillis, A. P., and Boyce, M. C., 1991, “Tooling Design in Sheet Metal Forming Using Springback Calculations,” to be published in: Int. J. Mech. Sci.
48. Kodama, H., 1981, “Automatic Method for Fabricating a Three Dimensional Plastic Model with Photo-Hardening Polymer,” Rev. Sci. Instrum., Vol. 52, No. 11, Nov.
49. Langari, G., and Tomizuka, M., 1988, “Fuzzy Linguistic Control of Arc Welding,” Sensors and Controls for Manufacturing, AMSE, Nov.
50. Masmoudi, R., and Hardt, D. E., 1992, “High-Frequency Torch Weaving for Enhanced Process Controllability: Effect on Coupling of Pool Width and Heat Affected Zone Width,” Proc. Third International Conference on Welding Research, ASME, Gatlinburg, June.
51. Montgomery, D. C., 1991, Introduction to Statistical Quality Control, Wiley, New York.
52. Narendra, K. S., and Lin, Y., 1980, “Stable Discrete Adaptive Control,” IEEE Trans. A. C., Vol. AC-25, No. 3, Nov.
53. Ousterhout, K. B., 1991, “Design and Control of a Flexible Process for ThreeDimensional Sheet Metal Forming,” Ph.D thesis, Dept, of Mechanical Engineering, MIT.
54. Reintjes, J., 1991, Numerical Control, Oxford U. Press, New York.
55. Sachs, E., Cima, M., Cornie, J., Brancazio, D., and Curodeau, A., 1990, “Three Dimensional Printing; Ceramic Tooling and Parts Directly from a CAD Model,” Proc. National Conference on Rapid Prototyping, Dayton, OH, June.
56. Smartt, H. H., 1992, “Intelligent Control of Arc Welding,” Proc. 3rd International Conference on Trends in Welding Research, Gatlinburg, June.
57. Song, J. B., and Hardt, D. E., 1990, “Estimation of Weld Bead Depth for ln-Process Control,” Automation of Manufacturing Processes, ASME Winter Annual Meeting, DSC-Vol. 22, pp. 123-134.
58. Song, J. B., and Hardt, D. E., 1991, “Multivariable Adaptive Control of Beam Geometry in GMA Welding,” Welding and Joining Processes, ASME Winter Annual Meeting, PED-VoI. 51, pp. 123-134.
59. Song, J. B., and Hardt, D. E., 1992, “Simultaneous Control of Bead Width and Depth Geometry in Gas-Metal Arc Welding,” Proc. Third International Conference on Welding Research, ASM, Gatlinburg, June.
60. Song, J. B., 1992, “Multivariable Adaptive Control in GMA Welding Using a Thermally Based Depth Estimator,” Ph.D. thesis, MIT, Department of Mechanical Engineering, Jan.
61. Suzuki, A., Hardt, D. E., and Valvani, L., 1991, “Application of Adaptive Control Theory to On Line GTA Weld Geometry Regulation,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 113, Mar., pp. 93103.
62. Taguchi, G., 1986, System of Experimental Design, Kraus International Publications, White Plains, NY.
63. Tam, A., and Hardt, D. E., 1989, “Weld Pool Impedance for Pool Geometry Measurement: Stationary and Non-Stationary Pools,” ASME Journal of Dynamic Systems, Measurement, and Control, Dec.
64. Webb, R. D., 1987, “Modeling and Control of a Three Dimensional Sheet Forming Process,” Ph.D. thesis, MIT, Dept, of Mechanical Engineering, May.
65. Webb, R. D., and Hardt, D. E., 1991, “A Transfer Function Description of Sheet Metal Forming for Process Control,” ASME J. Eng. Ind., Vol. 113, No. 44.
66. Welch, P. D., 1978, Modern Spectrum Analysis, D. G. Childers, ed., IEEE Press, New York.
67. Zacksenhouse, M., and Hardt, D. E., 1983, “Weld Pool Impedance Identification for Size Measurement and Control,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 105, No. 4.
68. Byran, Donaldson, and McClure, M “Some Considerations on the Application of Automatic Error Correction to Machine Tools,” Vol. 94, pp. 2-3.
69. Nachtigal, “Design of a Force Feedback Chattr Control System,” Vol. 94, pp. 5-10.
70. Middleditch, “Design Criteria for Multi-Axis Closed-Loop Computer Numerical Control Systems,” Vol. 96, pp. 36-40.
71. Klein K and Nachtigal, N “A Theoretical Basis for the Active Control of a Boring Bar Operation,” Vol. 97, pp. 172-178.
72. Klein K and Nachtigal, N, “The Application of Active Control to Improve Boring Bar Performance,” Vol. 97, pp. 179-183.
73. Schlueter, Retford, and van Wieren, “The Optimal Machine Tool Control Problem,” Vol. 100, pp. 170-176.
74. Srinivasan S and Nachtigal, N “Analysis and Design of Machine Tool Chatter Control Systems Using the Regeneration Spectrum,” Vol. 100, pp. 191-200.
75. Nachtigal, “Computer Aided Manufacturing and Control in Lumber Manufacturing,” Vol. 102, pp. 1-2.
76. Tomizuka, Dornfeld, and Purcell, P “Application of Microcomputers to Automatic Weld Quality Control,” Vol. 102, pp. 62-68.
77. Shankar S and Paul, P “A Mathematical Model for the Evaluation of Injection Molding Machine Control,” Vol. 104, pp. 86-92.
78. Trottsmann, Hansen, and Cook, C “General Scheme for Automatic Control of Continuous Bending of Beams,” Vol. 104, pp. 173-179.
79. Hardt, Roberts, and Stelson, S “Closed-Loop Shape Control of a Roll Bending Process,” Vol. 104, pp. 317-322.
80. Ulsoy, Koren, and Rasmussen, R “Principal Development in the Adaptive Control of Machine Tools,” Vol. 105, pp. 107-112.
81. Zacksenhouse Z and Hardt, H “Weld Pool Impedance Identification for Size Measurement and Control,” Vol. 105, pp. 179-184.
82. Tomizuka, Dornfeld, Bian, B and Cai, C “Experimental Evaluation of the Preview Servo for a Two Axis Positioning System,” Vol. 106, pp. 1-5.
83. Hardt, Garlow, and Wienert, W “A Model of Full Penetration Arc-Welding for Control Systems Design,” Vol. 107, pp. 40-46.
84. Watanabe, “A Model-Based Approach to Adaptive Control Optimization in Milling,” Vol. 108, pp. 56-64.
85. Stein, Colvin, Clever, C and Wang, W “Evaluation of DC Servo Machine Tool Feed Drives as Force Sensors,” Vol. 108, pp. 279-288.
86. Stein S and Shin, S “Current Monitoring of Field Controlled DC Spindle Drives,” Vol. 108, pp. 289-295.
87. Tomizuka, Chen, Renn, R and Tsao, T "Tool Positioning for Non-Circular Cutting with Lathe," Vol. 109, pp. 176-179
88. Doumanidis D and Hardt, H “A Model for In-Process Control of Thermal Properties During Welding,” Vol. Ill, pp. 40-50.
89. Koren, “The Optimal Locus Approach With Machining Applications,” Vol. Ill, pp. 260-267.
90. Hwang H and Chen, C “Constant Turning Force Adaptive Control via Sliding Mode Control Design,” Vol. 112, pp. 308-312.
91. Sorensen S and Eagar, E “Measurements of Oscillations in Partially Penetrated Weld Pools Through Spectral Analysis,” Vol. 112, pp. 463-468.
92. Sorensen S and Eagar, E, “Modeling of Oscillations in Partially Penetrated Weld Pools,” Vol. 112, pp. 463-468.
93. Measurement and Control for Batch Manufacturing, Hardt, ed.
94. Control of Manufacturing Processes and Robotic Systems, Hardt and Book, eds.
95. Sensors and Controls for Automated Manufacturing and Robotics, Stelson and Sweet, eds.
96. 1985 Robotics and Manufacturing Automation, Donath and Leu, eds.
97. Modeling, Sensing and Control of Manufacturing Processes, Srinivasan, Hardt, and Komanduri, eds.
98. Control Methods for Manufacturing Processes, Hardt, ed.
99. Control Issues in Manufacturing Processes, Stein, Koren, and Holmes, eds.
100. Automation in Manufacturing Processes, Danai and Malkin, eds.
101. Control of Manufacturing Processes, Danai and Malkin, eds.