SCOPUS 정보 검색 플랫폼

International Materials Reviews

Volumn 37, Issue 1, 1992, Pages 1-44

Rapid solidification processing with specific application to aluminium alloys

(3) Lavernia, E J a Ayers, J D b Srivatsan, T S c

a UNIVERSITY OF CALIFORNIA (United States)

b NAVAL RESEARCH LABORATORY (United States)

c UNIVERSITY OF AKRON (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIRCRAFT MATERIALS--LIGHT METALS; ALUMINUM METALLOGRAPHY--MICROSTRUCTURE; ATOMIZERS; FATIGUE OF MATERIALS; LITHIUM ALUMINUM ALLOYS;

DISPERSION STRENGTHENED ALLOYS; DROP EMULSION TECHNIQUE; FOIL CASTING PROCESSES; GIBBS-THOMPSON UNDERCOOLING; RANZ-MARSHALL CORRELATION; RAPID SOLIDIFICATION TECHNOLOGY;

ALUMINUM AND ALLOYS;

EID: 0026679543 PISSN: 09506608 EISSN: 17432804 Source Type: Journal
DOI: 10.1179/imr.1992.37.1.1 Document Type: Review

Times cited : (346)

References (243)

1
- 21544482215
- P. Duwez, R. H. WILLENS, & W. Klement: J. Appl. Phys., 1960, 31, 1136-1137.
- (1960) J. Appl. Phys. , vol.31 , pp. 1136-1137
- Duwez, P.¹ Willens, R.H.² Klement, W.³

2
- 0009181335
- R. J. Towner: Met. Eng. Q., 1961, 1, 24-40.
- (1961) Met. Eng. Q. , vol.1 , pp. 24-40
- Towner, R.J.¹

3
- 0003757051
- Metals Park, OH, American Society For Metals
- J. E. Hatch (Ed.): ‘Aluminum, Properties & Physical Metallurgy’; 1984, Metals Park, OH, American Society For Metals.
- (1984) Aluminum, Properties & Physical Metallurgy
- Hatch, J.E.¹

4
- 84974899687
- R. Mehrabian, Washington DC, National Bureau Of St&ards
- R. E. LEWIS, I. G. PALMER, J. C. ECKVALL, I. F. SAKATA, & W. E. Quist: In ‘Rapid Solidification Processing: Principles & Technologies IIP, (Ed. R. Mehrabian), 613; 1983, Washington DC, National Bureau Of St&ards.
- (1983) ‘Rapid Solidification Processing: Principles & Technologies IIP , vol.613
- Lewis, R.E.¹ Palmer, I.G.² Eckvall, J.C.³ Sakata, I.F.⁴ Quist, W.E.⁵

5
- 0042612914
- S. J. SAVAGE & F. H. Froes: J. Met., 1984, 36, (4), 20-33.
- (1984) J. Met. , vol.36 , Issue.4 , pp. 20-33
- Savage, S.J.¹ Froes, F.H.²

6
- 0003961623
- Monograph No. 8, London, The Institution Of Metallurgists
- H. Jones: ‘Rapid Solidification Of Metals & Alloys’, Monograph No. 8; 1982, London, The Institution Of Metallurgists.
- (1982) Rapid Solidification of Metals & Alloys
- Jones, H.¹

7
- 0010974541
- R. Mehrabian Et Al, Baton Rouge, LA, Claitor’s Publ. Division
- M. Cohen, B. H. Kear, & R. Mehrabian: In ‘Rapid Solidification Processing: Principles & Technologies II’, (Ed. R. Mehrabian Et Al.), 1-27; 1980, Baton Rouge, LA, Claitor’s Publ. Division.
- (1980) Rapid Solidification Processing: Principles & Technologies II , pp. 1-27
- Cohen, M.¹ Kear, B.H.² Mehrabian, R.³

8
- 84974974542
- Phoenix, AZ, Metallurgical Society Of AIME
- J. H. Perepezco, D. V. Furrer, & B. A. Mueller: Annual Meeting, Phoenix, AZ, Feb. 1988, Metallurgical Society Of AIME.
- (1988) Annual Meeting
- Perepezco, J.H.¹ Furrer, D.V.² Mueller, B.A.³

9
- 84974973642
- Y. W. Kim & W. M. Griffith, Warrendale, PA, Metallurgical Society Of AIME
- H. Jones: In ‘Dispersion Strengthened Aluminum Alloys’, (Ed. Y. W. Kim & W. M. Griffith), 57; 1988, Warrendale, PA, Metallurgical Society Of AIME.
- (1988) Dispersion Strengthened Aluminum Alloys , vol.57
- Jones, H.¹

10
- 0023952684
- R. F. Cochrane, D. V. Evans, & D. V. Greer: Mater. Sci. Eng., 1988, 98, 99-103.
- (1988) Mater. Sci. Eng. , vol.98 , pp. 99-103
- Cochrane, R.F.¹ Evans, D.V.² Greer, D.V.³

11
- 0023952870
- R. WILLNECKER, D. M. HERLACH, & B. FEUERBACHER: Mater. Sci. Eng., 1988, 98, 85-88.
- (1988) Mater. Sci. Eng. , vol.98 , pp. 85-88
- Willnecker, R.¹ Herlach, D.M.² Feuerbacher, B.³

12
- 36549100154
- R. WILLNECKER, D. M. HERLACH, & B. FEUERBACHER: Appl. Phys. Lett., 1986, 49, (20), 1339.
- (1986) Appl. Phys. Lett. , vol.49 , Issue.20 , pp. 1339
- Willnecker, R.¹ Herlach, D.M.² Feuerbacher, B.³

13
- 0344144485
- New York, Mcgraw-Hill
- M. C. Flemings: ‘Solidification Processing’, Chap. 3; 1974, New York, Mcgraw-Hill.
- (1974) Solidification Processing, Chap. 3
- Flemings, M.C.¹

14
- 0023953046
- Y. ABE, K. Miyasawa, & M. Nakamura: Mater. Sci. Eng., 1988, 98, 351-355.
- (1988) Mater. Sci. Eng. , vol.98 , pp. 351-355
- Abe, Y.¹ Miyasawa, K.² Nakamura, M.³

15
- 0020301052
- R. Mehrabian: Int. Met. Rev., 1982, 27, 185-208.
- (1982) Int. Met. Rev. , vol.27 , pp. 185-208
- Mehrabian, R.¹

16
- 0024656929
- E. J. Lavernia & J. Baram: J. Mater. Sci. Lett., 1989, 8, 612-614.
- (1989) J. Mater. Sci. Lett. , vol.8 , pp. 612-614
- Lavernia, E.J.¹ Baram, J.²

17
- 0024134903
- O. SALAS & C. G. Levi: Int. J. Rapid Solid., 1988, 4, 1-21.
- (1988) Int. J. Rapid Solid. , vol.4 , pp. 1-21
- Salas, O.¹ Levi, C.G.²

18
- 84858176110
- W. W. Mullins & R. F. Sekerka: J. Appl. Phys., 1964, 23, 444.
- (1964) J. Appl. Phys. , vol.23 , pp. 444
- Mullins, W.W.¹ Sekerka, R.F.²

19
- 0022806147
- J. A. Sarreal & G. J. Abbaschian: Metall. Trans., 1988,17A, 2063-2073.
- (1988) Metall. Trans. , vol.17 , pp. 2063-2073
- Sarreal, J.A.¹ Abbaschian, G.J.²

20
- 84974899662
- C. Baker Et Al, London, The Institute Of Metals
- F. H. Samuel: In ‘Aluminium-Lithium Alloys IIP, (Ed. C. Baker Et Al), 105-111; 1986, London, The Institute Of Metals.
- (1986) In ‘Aluminium-Lithium Alloys IIP , pp. 105-111
- Samuel, F.H.¹

21
- 0004114116
- London, The Metals Society
- A. Hellawell: In ‘Solidification & Casting Of Metals’, 161-168; 1979, London, The Metals Society.
- (1979) Solidification & Casting of Metals , pp. 161-168
- Hellawell, A.¹

22
- 2542580513
- W. GILL, J. H. YANG, J. C. MULLENDORF, & C. M. ADAM: J. Cryst. Growth, 1984, 66, 351-368.
- (1984) J. Cryst. Growth , vol.66 , pp. 351-368
- Gill, W.¹ Yang, J.H.² Mullendorf, J.C.³ Adam, C.M.⁴

23
- 84974898438
- C. Suranayana & T. R. Anatharaman: J. Mater. Sci., 1970, 5, 992-1004.
- (1970) J. Mater. Sci. , vol.5 , pp. 992-1004
- Suranayana, C.¹ Anatharaman, T.R.²

24
- 11744309677
- R. Ichikawa, T. Ohashi, & T. Ikeda: Trans. Jpn Inst. Met., 1971, 12, 280-284.
- (1971) Trans. Jpn Inst. Met. , vol.12 , pp. 280-284
- Ichikawa, R.¹ Ohashi, T.² Ikeda, T.³

25
- 0023401234
- M. C. Mcconnell & P. G. Partridge: Acta Metall, 1987, 35, 1973-1980.
- (1987) Acta Metall , vol.35 , pp. 1973-1980
- McConnell, M.C.¹ Partridge, P.G.²

26
- 0023401274
- P. G. Partridge & M. C. Mcconnell: Acta Metall, 1987, 35, 1981-1993.
- (1987) Acta Metall , vol.35 , pp. 1981-1993
- Partridge, P.G.¹ McConnell, M.C.²

27
- 0023953015
- W. J. Boettinger: Mater. Sei. Eng., 1988, 98, 123-130.
- (1988) Mater. Sei. Eng. , vol.98 , pp. 123-130
- Boettinger, W.J.¹

28
- 0021166496
- W. J. BOETTINGER, D. SHECTMAN, R. J. SCHAEFER, & F. S. Biancaniello: Metall. Trans., 1984, 15A, 55-65.
- (1984) Metall. Trans. , vol.15 , pp. 55-65
- Boettinger, W.J.¹ Shectman, D.² Schaefer, R.J.³ Biancaniello, F.S.⁴

29
- 0018998264
- K. Chattopadyay & P. Mamachandrarao: J. Mater. Sei., 1980, 15, 685-692.
- (1980) J. Mater. Sei. , vol.15 , pp. 685-692
- Chattopadyay, K.¹ Mamachandrarao, P.²

30
- 0022083867
- D. C. Van Aken & H. L. Fraser: Acta Metall, 1985, 33, 963-974.
- (1985) Acta Metall , vol.33 , pp. 963-974
- Van Aken, D.C.¹ Fraser, H.L.²

31
- 0017958012
- H. Jones: Aluminium, 1987, 54, (4), 274.
- (1987) Aluminium , vol.54 , Issue.4 , pp. 274
- Jones, H.¹

32
- 0003416277
- Y. W. Kim & W. M. Griffith, Warrendale, PA, Metallurgical Society Of AIME
- Y. W. Kim: In ‘Dispersion Strengthened Aluminum Alloys’, (Ed. Y. W. Kim & W. M. Griffith), 157; 1988, Warrendale, PA, Metallurgical Society Of AIME.
- (1988) Dispersion Strengthened Aluminum Alloys , pp. 157
- Kim, Y.W.¹

33
- 84974948322
- F. H. Froes & S. J. Savage, Metals Park, OH, American Society For Metals
- M. J. Couper & R. F. Singer: In ‘Enhanced Properties In Structural Metals Via Rapid Solidification’, (Ed. F. H. Froes & S. J. Savage), 273; 1986, Metals Park, OH, American Society For Metals.
- (1986) In ‘Enhanced Properties in Structural Metals via Rapid Solidification’ , vol.273
- Couper, M.J.¹ Singer, R.F.²

34
- 0005329225
- E. H. HOLLINGSWORTH, G. R. FRANK, Jr, & R. E. WILLETT: Trans. AIME, 1962, 224, 188-189.
- (1962) Trans. AIME , vol.224 , pp. 188-189
- Hollingsworth, E.H.¹ Frank, G.R.² Willett, R.E.³

35
- 0025444851
- M. RUHR, I. UCOK, E. J. LAVERNIA, J. BARAM, & N. J. GRANT: Metall. Trans., 1990, 21A, 1785-1789.
- (1990) Metall. Trans. , vol.21 , pp. 1785-1789
- Ruhr, M.¹ Ucok, I.² Lavernia, E.J.³ Baram, J.⁴ Grant, N.J.⁵

36
- 0022806147
- J. A. Sarreal & G. J. Abbaschian: Metall. Trans., 1986,17A, 2063.
- (1986) Metall. Trans. , vol.17 , pp. 1986
- Sarreal, J.A.¹ Abbaschian, G.J.²

37
- 0022715956
- T. Ohashi, L. Dai, & N. Fukatsu: Metall. Trans., 1986, 17A, 799-806.
- (1986) Metall. Trans. , vol.17 , pp. 799-806
- Ohashi, T.¹ Dai, L.² Fukatsu, N.³

38
- 0023952896
- J. A. Juarez-Islas, H. Jones, & W. Kurz: Mater. Sei. Eng., 1988, 98, 201-205.
- (1988) Mater. Sei. Eng. , vol.98 , pp. 201-205
- Juarez-Islas, J.A.¹ Jones, H.² Kurz, W.³

39
- 0023288051
- J. A. Juarez-islas & H. Jones: Acta Metall, 1987, 35, 499-507.
- (1987) Acta Metall , vol.35 , pp. 499-507
- Juarez-Islas, J.A.¹ Jones, H.²

40
- 0022130511
- M. D. Ball & D. J. Lloyd: Scr. Metall, 1985, 19, 1065-1068.
- (1985) Scr. Metall , vol.19 , pp. 1065-1068
- Ball, M.D.¹ Lloyd, D.J.²

41
- 33749415651
- B. DUBOST, J.-M. LANG, M. TANAKA, P. SAINFORT, & M. AUDIER: Nature, 1986, 324, 48-50.
- (1986) Nature , vol.324 , pp. 48-50
- Dubost, B.¹ Lang, J.-M.² Tanaka, M.³ Sainfort, P.⁴ Audier, M.⁵

42
- 33745940037
- W. Klement, R. H. Willens, & P. Duwez: Nature, 1960, 187, 869-879.
- (1960) Nature , vol.187 , pp. 869-879
- Klement, W.¹ Willens, R.H.² Duwez, P.³

43
- 0015489479
- U. Köster: Acta Metall, 1972, 20, 1361.
- (1972) Acta Metall , vol.20 , pp. 1361
- Köster, U.¹

44
- 0001911252
- P. RAMACHANDRARAO, M. LARIDJANI, & R. W. CAHN: Z. Metallkd., 1972, 63, 43.
- (1972) Z. Metallkd. , vol.63 , pp. 43
- Ramachandrarao, P.¹ Laridjani, M.² Cahn, R.W.³

45
- 0002493602
- H. A. DAVIS & J. B. Hull: Scr. Metall, 1972, 6, 241.
- (1972) Scr. Metall , vol.6 , pp. 241
- Davis, H.A.¹ Hull, J.B.²

46
- 0016059237
- H. A. Davis & J. B. Hull: J. Mater. Sei., 1974, 9, 707.
- (1974) J. Mater. Sei. , vol.9 , pp. 707
- Davis, H.A.¹ Hull, J.B.²

47
- 0020737361
- R. O. SUZUKI, J. KOMATSU, K. F. KOBAYASHI, & P. H. SHINGU: J. Mater. Scl, 1983, 18, 1195-1201.
- (1983) J. Mater. Scl , vol.18 , pp. 1195-1201
- Suzuki, R.O.¹ Komatsu, J.² Kobayashi, K.F.³ Shingu, P.H.⁴

48
- 0016558323
- H. A. Davis & B. E. Lewis: Scr. Metall, 1975, 9, 1107.
- (1975) Scr. Metall , vol.9 , pp. 1107
- Davis, H.A.¹ Lewis, B.E.²

49
- 0026171601
- H. CHEN, Y. HE, G. J. Shiplet, & S. J. Poon: Scr. Metall. Mater., 1991, 25, 1421.
- (1991) Scr. Metall. Mater. , vol.25 , pp. 1421
- Chen, H.¹ He, Y.² Shiplet, G.J.³ Poon, S.J.⁴

50
- 0026188357
- Y.-H. Kim, A. Inoue, & T. Matsumoto: J. Jpn Inst. Met., 1991, 32, 599.
- (1991) J. Jpn Inst. Met. , vol.32 , pp. 599
- Kim, Y.-H.¹ Inoue, A.² Matsumoto, T.³

51
- 33751141500
- D. SHECHTMAN, J. BLECH, D. GRATIAS, & J. W. CAHN: Phys. Rev. Lett., 1984, 53, 1951-1953.
- (1984) Phys. Rev. Lett. , vol.53 , pp. 1951-1953
- Shechtman, D.¹ Blech, J.² Gratias, D.³ Cahn, J.W.⁴

52
- 0001156126
- L. Bendersky: Phys. Rev. Lett., 1985, 55, 1461.
- (1985) Phys. Rev. Lett. , vol.55 , pp. 1461
- Bendersky, L.¹

53
- 0006324904
- M. V. Faric, New York, Academic Press
- R. J. Schaefer & L. A. Bendersky: In ‘Introduction To Quasicrystals’, (Ed. M. V. Faric); 1988, New York, Academic Press.
- (1988) In ‘Introduction to Quasicrystals’
- Schaefer, R.J.¹ Bendersky, L.A.²

54
- 5844234726
- J. Burke & V. Weiss, Syracuse University Press
- E. Klar & W. M. Shaefer: In ‘Powder Metallurgy For Highperformance Applications’, (Ed. J. Burke & V. Weiss), 57-68; 1972, Syracuse University Press.
- (1972) Powder Metallurgy for Highperformance Applications , pp. 57-68
- Klar, E.¹ Shaefer, W.M.²

55
- 0344403498
- N. Dombrowski & W. R. Johns: Chem. Eng. Sei., 1963, 118, 203-214.
- (1963) Chem. Eng. Sei. , vol.118 , pp. 203-214
- Dombrowski, N.¹ Johns, W.R.²

56
- 0003894512
- R. L. Ashbrook, Metals Park, OH, American Society For Metals
- A. Lawley: In ‘Rapid Solidification Technology Source Book’, (Ed. R. L. Ashbrook), 47-65; 1983, Metals Park, OH, American Society For Metals.
- (1983) Rapid Solidification Technology Source Book , pp. 47-65
- Lawley, A.¹

57
- 0018006688
- J. B. See & G. H. Johnston: Powder Technol, 1978, 21, 119-133.
- (1978) Powder Technol , vol.21 , pp. 119-133
- See, J.B.¹ Johnston, G.H.²

58
- 0003116422
- Metals Park, OH, American Society For Metals
- E. Klar & J. W. Resko: In ‘Metals H&book’, 9 Edn, Vol. 7, 25; 1984, Metals Park, OH, American Society For Metals.
- (1984) Metals H&Book , vol.7 , pp. 25
- Klar, E.¹ Resko, J.W.²

59
- 0004182798
- New York, American Powder Metallurgy Institute
- J. S. Hirschhorn: ‘Introduction To Powder Metallurgy’; 1981, New York, American Powder Metallurgy Institute.
- (1981) Introduction to Powder Metallurgy
- Hirschhorn, J.S.¹

60
- 84969903039
- P. U. Gummeson: Powder Metall, 1972, 15, (29), 67-94.
- (1972) Powder Metall , vol.15 , Issue.29 , pp. 67-94
- Gummeson, P.U.¹

61
- 0015975334
- H. H. Hausner & W. E. Smith, New York, Plenum Press
- A. R. E. Singer, J. S. Coombs, & A. G. Leatham: In ‘Modern Developments In Powder Metallurgy’, Vol. 8, (Ed. H. H. Hausner & W. E. Smith), 263; 1974, New York, Plenum Press.
- (1974) In ‘Modern Developments in Powder Metallurgy , vol.8 , pp. 263
- Singer, A.R.E.¹ Coombs, J.S.² Leatham, A.G.³

62
- 73049100333
- H. Kuhn & A. Lawley, New York, Academic Press
- J. A. Tallmadge: In ‘Powder Metallurgy Processing, New Techniques & Analyses’, (Ed. H. Kuhn & A. Lawley), 1; 1978, New York, Academic Press.
- (1978) In ‘Powder Metallurgy Processing, New Techniques & Analyses’ , vol.1
- Tallmadge, J.A.¹

63
- 73049108586
- S. L. Shinde & G. S. Tenkoldar: Powder Metall. Int., 1977, 9, 132.
- (1977) Powder Metall. Int. , vol.9 , pp. 132
- Shinde, S.L.¹ Tenkoldar, G.S.²

64
- 73049088854
- G. Rai, E. Lavernia, & N. J. Grant: J. Met., 1985, 37, (8), 17-29.
- (1985) J. Met. , vol.37 , Issue.8 , pp. 17-29
- Rai, G.¹ Lavernia, E.² Grant, N.J.³

65
- 0023953110
- J. Baram: Mater. Sci. Eng., 1988, 98, 65-69.
- (1988) Mater. Sci. Eng. , vol.98 , pp. 65-69
- Baram, J.¹

66
- 84974882051
- S. Steeb & H. Warlimont, Amsterdam, North Holl&
- M. J. Couper & R. F. Singer: In ‘Rapidly Quenched Metals V’, (Ed. S. Steeb & H. Warlimont), 135; 1985, Amsterdam, North Holl&.
- (1985) In ‘Rapidly Quenched Metals V , vol.135
- Couper, M.J.¹ Singer, R.F.²

67
- 0024036514
- J. BARAM, M. VEISTINEN, E. LAVERNIA, M. ABINANTE, & N. J. GRANT: J. Mater. Sci., 1988, 23, 2457-2463.
- (1988) J. Mater. Sci. , vol.23 , pp. 2457-2463
- Baram, J.¹ Veistinen, M.² Lavernia, E.³ Abinante, M.⁴ Grant, N.J.⁵

68
- 0023413321
- M. VEISTINEN, E. LAVERNIA, M. ABINANTE, & N. J. GRANT: Mater. Lett., 1987, 5, (10), 373-379.
- (1987) Mater. Lett. , vol.5 , Issue.10 , pp. 373-379
- Veistinen, M.¹ Lavernia, E.² Abinante, M.³ Grant, N.J.⁴

69
- 0344319646
- J. S. Thompson: J. Inst. Met., 1988, 74, 101-132.
- (1988) J. Inst. Met. , vol.74 , pp. 101-132
- Thompson, J.S.¹

70
- 0039134881
- M. G. Davies & D. E. S. Olderfield: Acustica, 1962, 12, 257.
- (1962) Acustica , vol.12 , pp. 257
- Davies, M.G.¹ Olderfield, D.E.S.²

71
- 0003471445
- New York, Wiley
- J. Szekely & N. J. Themelis: ‘Rate Phenomena In Process Metallurgy’, 97; 1971, New York, Wiley.
- (1971) Rate Phenomena in Process Metallurgy , vol.97
- Szekely, J.¹ Themelis, N.J.²

72
- 0037996574
- O. S. Nichiporenko & I. Naida: Sov. Powder Metall. Met. Ceram., 1968, 7, (7), 5099-512.
- (1968) Sov. Powder Metall. Met. Ceram. , vol.7 , Issue.7 , pp. 5099-5512
- Nichiporenko, O.S.¹ Naida, I.²

73
- 0016995854
- O. S. Nichiporenko: Sov. Powder Metall. Met. Ceram., 1976, 15, (9), 665-669.
- (1976) Sov. Powder Metall. Met. Ceram. , vol.15 , Issue.9 , pp. 665-669
- Nichiporenko, O.S.¹

74
- 84974882071
- Scd Thesis
- M. Libera: Scd Thesis, Massachusetts Institute Of Technology, 1987.
- (1987) Massachusetts Institute of Technology
- Libera, M.¹

75
- 48549109464
- J. H. Perepezko: Mater. Sci. Eng., 1984, 65, 125-135.
- (1984) Mater. Sci. Eng. , vol.65 , pp. 125-135
- Perepezko, J.H.¹

76
- 84910878808
- E. J. Lavernia Et Al), Warrendale, PA, Metallurgical Society Of AIME
- V. G. Mcdonnell, E. J. Lavernia, & G. S. Samuelsen: In ‘Synthesis & Analysis In Materials Processing: Advances In Characterization & Diagnostics Of Ceramic & Metal Particulate Processing’, (Ed. E. J. Lavernia Et Al), 30-55; 1989, Warrendale, PA, Metallurgical Society Of AIME.
- (1989) In ‘Synthesis & Analysis in Materials Processing: Advances in Characterization & Diagnostics of Ceramic & Metal Particulate Processing’ , pp. 30-55
- McDonnell, V.G.¹ Lavernia, E.J.² Samuelsen, G.S.³

77
- 0000778217
- W. E. Ranz & W. R. Marshall: Chem. Eng. Prog., 1952, 48, 173.
- (1952) Chem. Eng. Prog. , vol.48 , pp. 173
- Ranz, W.E.¹ Marshall, W.R.²

78
- 0024872040
- E. Lavernia: Int. J. Rapid Solid., 1989, 5, 47-85.
- (1989) Int. J. Rapid Solid. , vol.5 , pp. 47-85
- Lavernia, E.¹

79
- 0000748527
- T. F. Bower, H. D. Brody, & M. C. Flemings: Trans. AIME, 1965, 233, 624.
- (1965) Trans. AIME , vol.233 , pp. 624
- Bower, T.F.¹ Brody, H.D.² Flemings, M.C.³

80
- 0020089308
- C. G. LEVI & R. Mehrabian: Metall. Trans., 1982, 13A, 221-234.
- (1982) Metall. Trans. , vol.13 , pp. 221-234
- Levi, C.G.¹ Mehrabian, R.²

81
- 0024137489
- E. J. LAVERNIA, E. GUTIERREZ, J. SZEKELY, & N. J. GRANT: Int. J. Rapid Solid., 1988, 4, (1/2), 89-124.
- (1988) Int. J. Rapid Solid. , vol.4 , Issue.1-2 , pp. 89-124
- Lavernia, E.J.¹ Gutierrez, E.² Szekely, J.³ Grant, N.J.⁴

82
- 0024304896
- E. GUTIERREZ, E. J. LAVERNIA, G. TRAPAGA, J. SZEKELY, & N. J. Grant: Metall. Trans., 1989, 20A, 71-85.
- (1989) Metall. Trans. , vol.20 , pp. 71-85
- Gutierrez, E.¹ Lavernia, E.J.² Trapaga, G.³ Szekely, J.⁴ Grant, N.J.⁵

83
- 2242467293
- E. J. LAVERNIA, E. GUTIERREZ, J. SZEKELY, & N. J. GRANT: Prog. Powder Metall, 1987, 54, 683-710.
- (1987) Prog. Powder Metall , vol.54 , pp. 683-710
- Lavernia, E.J.¹ Gutierrez, E.² Szekely, J.³ Grant, N.J.⁴

84
- 0014736904
- H. Lubanska: J. Met., 1970, 22, (2), 45.
- (1970) J. Met. , vol.22 , Issue.2 , pp. 45
- Lubanska, H.¹

85
- 0020303996
- S. R. Coriell & D. Turnbull: Acta Metall, 1982, 30, 2135-2139.
- (1982) Acta Metall , vol.30 , pp. 2135-2139
- Coriell, S.R.¹ Turnbull, D.²

86
- 0000218626
- J. W. Cahn, W. B. Hillig, & G. W. Sears: Acta Metall, 1964, 12, 1421.
- (1964) Acta Metall , vol.12 , pp. 1421
- Cahn, J.W.¹ Hillig, W.B.² Sears, G.W.³

87
- 0022941866
- London, The Institute Of Metals
- R. A. RICKS, P. M. BUDD, P. J. GOODHEW, V. L. KOHLER, & T. W. Clyne: In ‘Aluminium-Lithium Alloys IIP, (Ed. C. Baker Et Al), 97-104; 1986, London, The Institute Of Metals.
- (1986) In ‘Aluminium-Lithium Alloys IIP, (Ed. C. Baker Et Al), 97-104
- Ricks, R.A.¹ Budd, P.M.² Goodhew, P.J.³ Kohler, V.L.⁴ Clyne, T.W.⁵

88
- 0012127188
- P. Duwez, R. H. Willens, & W. Klement: J. Appl. Phys., 1960, 31, 1500.
- (1960) J. Appl. Phys. , vol.31 , pp. 1500
- Duwez, P.¹ Willens, R.H.² Klement, W.³

89
- 0005724966
- P. Predecki, A. W. Mullendore, & N. J. Grant: Trans. AIME, 1965, 233, 1581-1586.
- (1965) Trans. AIME , vol.233 , pp. 1581-1586
- Predecki, P.¹ Mullendore, A.W.² Grant, N.J.³

90
- 3342929848
- I. S. Miroshnichenko & I. V. Salli: Ind. Lab. (USSR), 1959, 25, 1463-1464.
- (1959) Ind. Lab. (USSR) , vol.25 , pp. 1463-1464
- Miroshnichenko, I.S.¹ Salli, I.V.²

91
- 84910198259
- I. V. Salli & L. P. Limina: Ind. Lab. (USSR), 1965, 31, 141-142.
- (1965) Ind. Lab. (USSR) , vol.31 , pp. 141-142
- Salli, I.V.¹ Limina, L.P.²

92
- 0014604094
- R. Pond & R. Maddin: Trans. AIME, 1969, 245, 2475-2476.
- (1969) Trans. AIME , vol.245 , pp. 2475-2476
- Pond, R.¹ Maddin, R.²

93
- 0000063058
- E. Babic, E. Girt, R. Krsnik, & B. Leontic: J. Phys. E, Sci. Instrum., 1970, 3, 1014-1015.
- (1970) J. Phys. E, Sci. Instrum. , vol.3 , pp. 1014-1015
- Babic, E.¹ Girt, E.² Krsnik, R.³ Leontic, B.⁴

94
- 0001271820
- H. S. Chen & C. E. Miller: Rev. Sci. Instrum., 1970, 41, 1237-1238.
- (1970) Rev. Sci. Instrum. , vol.41 , pp. 1237-1238
- Chen, H.S.¹ Miller, C.E.²

95
- 84974886576
- Metallurgy & Applications Of Rapid Solidification
- C. E. Mobley: ‘Metallurgy & Applications Of Rapid Solidification’, Battelle Seattle Research Center, June 1971.
- (1971) Battelle Seattle Research Center
- Mobley, C.E.¹

96
- 0015346197
- C. E. Mobley, A. H. Clauer, & B. A. Wilcox: J. Inst. Met., 1972, 100, 142-145.
- (1972) J. Inst. Met. , vol.100 , pp. 142-145
- Mobley, C.E.¹ Clauer, A.H.² Wilcox, B.A.³

97
- 84974952664
- M. C. Narasimham: US Patent 4 221 257, 1980.
- (1980) US Patent , vol.4 , Issue.221 , pp. 257
- Narasimham, M.C.¹

98
- 84967469515
- E. H. Strange & C. A. Pim: US Patent 905 758, 1908.
- (1908) US Patent , vol.905 , pp. 758
- Strange, E.H.¹ Pim, C.A.²

99
- 84974892073
- E. H. Strange: US Patent 993 904, 1911.
- (1911) US Patent , vol.993 , pp. 904
- Strange, E.H.¹

100
- 84974999445
- D. King: US Patent 3 522 836, 1970.
- (1970) US Patent , vol.3 , Issue.522 , pp. 836
- King, D.¹

101
- 0022875572
- (Ed. B. C. Giessen Et Al), Mater. Res. Soc. Symp. Proc
- T. A. GASPAR, L. E. HACKMAN, Y. SAHAI, W. A. T. CLARK, & J. Wood: In ‘Rapidly Solidified Alloys & Their Mechanical & Magnetic Properties’, (Ed. B. C. Giessen Et Al), Mater. Res. Soc. Symp. Proc., 1986, 58, 23-26.
- (1986) Rapidly Solidified Alloys & Their Mechanical & Magnetic Properties , vol.58 , pp. 23-26
- Gaspar, T.A.¹ Hackman, L.E.² Sahai, Y.³ Clark, W.A.T.⁴ Wood, J.⁵

102
- 84913074231
- T. A. Gaspar: US Patent 4 705 095, 1987.
- (1987) US Patent 4 705 095
- Gaspar, T.A.¹

103
- 84974948489
- L. E. HACKMAN, S. DICKSON, D. L. DUNLOP, & M. E. HANDSHEY: US Patent 4 813 472, 1989.
- (1989) US Patent , vol.4 , Issue.813 , pp. 472
- Hackman, L.E.¹ Dickson, S.² Dunlop, D.L.³ Handshey, M.E.⁴

104
- 0022865584
- B. P. Bewlay & B. Cantor: Int. J. Rapid Solid., 1986, 2, 107-123.
- (1986) Int. J. Rapid Solid. , vol.2 , pp. 107-123
- Bewlay, B.P.¹ Cantor, B.²

105
- 0008160207
- P. W. Lee & R. S. Carbonara, Metals Park, OH, American Society For Metals
- M. E. Chu, A. Diron, & D. A. Granger: In ‘Rapidly Solidified Materials’, (Ed. P. W. Lee & R. S. Carbonara), 311-316; 1986, Metals Park, OH, American Society For Metals.
- (1986) In ‘Rapidly Solidified Materials’ , pp. 311-316
- Chu, M.E.¹ Diron, A.² Granger, D.A.³

106
- 0014608061
- H. Jones: Mater. Sci. Eng., 1969/70, 5, 1-18.
- (1969) Mater. Sci. Eng , vol.5 , pp. 1-18
- Jones, H.¹

107
- 84974981536
- Washington, DC, National Bureau Of St&ards
- F. R. BILLMAN, J. C. KULI, G. J. HILDEMAN, J. E. PETIT, & J. A. Walker: In ‘Rapid Solidification Processing: Principles & Technologies IIP, (Ed. R. Mehrabian), 532-546; 1983, Washington, DC, National Bureau Of St&ards.
- (1983) In ‘Rapid Solidification Processing: Principles & Technologies IIP , pp. 532-546
- Billman, F.R.¹ Kuli, J.C.² Hildeman, G.J.³ Petit, J.E.⁴ Walker, J.A.⁵

108
- 84875817042
- Y. W. Kim, W. M. Griffith, & F. H. Froes: J. Met., 1985, 37, (8), 27-33.
- (1985) J. Met. , vol.37 , Issue.8 , pp. 27-33
- Kim, Y.W.¹ Griffith, W.M.² Froes, F.H.³

109
- 0020241258
- G. J. Hildeman & M. J. Koczak, Warrendale, PA, Metallurgical Society Of AIME
- L. ACKERMANN, I. GUILLEMIN, R. LALAUZE, & C. PIJOLAT: In ‘High-Strength Powder Metallurgy Aluminum Alloys’, (Ed. G. J. Hildeman & M. J. Koczak), 175-190; 1982, Warrendale, PA, Metallurgical Society Of AIME.
- (1982) High-Strength Powder Metallurgy Aluminum Alloys , pp. 175-190
- Ackermann, L.¹ Guillemin, I.² Lalauze, R.³ Pijolat, C.⁴

110
- 25444505808
- Y. W. Kim: Prog. Powder Metall., 1987, 43, 13-22.
- (1987) Prog. Powder Metall. , vol.43 , pp. 13-22
- Kim, Y.W.¹

111
- 0022867869
- T. ANDO, E. J. Lavernia, & N. J. Grant: Mater. Lett., 1986, 5, (12), 17-28.
- (1986) Mater. Lett. , vol.5 , Issue.12 , pp. 17-28
- Ando, T.¹ Lavernia, E.J.² Grant, N.J.³

112
- 0019577236
- J. R. PICKENS: J. Mater. Sci., 1981, 16, 1437-1457.
- (1981) J. Mater. Sci. , vol.16 , pp. 1437-1457
- Pickens, J.R.¹

113
- 0022784222
- R. Lalauze, I. Guillemin, & C. Pijolat: J. Thermal Anal, 1986, 31, 1109-1119.
- (1986) J. Thermal Anal , vol.31 , pp. 1109-1119
- Lalauze, R.¹ Guillemin, I.² Pijolat, C.³

114
- 84974945151
- Paper 28, Shrewsbury, UK, MPR Publ. Services
- M. J. COOPER, M. NAUER, R. BAUMAN, & R. F. SINGER: In ‘PM Aerospace Materials’87’, Paper 28; 1988, Shrewsbury, UK, MPR Publ. Services.
- (1988) PM Aerospace Materials87’
- Cooper, M.J.¹ Nauer, M.² Bauman, R.³ Singer, R.F.⁴

115
- 0019080574
- F. R. Singer, W. C. Oliver, & W. D. Nix: Metall. Trans., 1980, 11A, 1895.
- (1980) Metall. Trans. , vol.11 , pp. 1895
- Singer, F.R.¹ Oliver, W.C.² Nix, W.D.³

116
- 0022939760
- C. Baker Et Al, London, The Institute Of Metals
- P. J. Meschter, R. J. Lederich, & J. E. O’neal: In ‘Aluminiumlithium Alloys IIP, (Ed. C. Baker Et Al), 85-96; 1986, London, The Institute Of Metals.
- (1986) In ‘Aluminiumlithium Alloys IIP , pp. 85-96
- Meschter, P.J.¹ Lederich, R.J.² O’Neal, J.E.³

117
- 0022935371
- London, The Institute Of Metals
- S. Fox, H. M. Flower, & D. S. Mcdarmaid: In ‘Aluminiumlithium Alloys IIP, (Ed. C. Baker Et Al), 263-272; 1986, London, The Institute Of Metals.
- (1986) In ‘Aluminiumlithium Alloys IIP , pp. 263-272
- Fox, S.¹ Flower, H.M.² McDarmaid, D.S.³

118
- 51249173850
- M. Ahmad: Metall. Trans., 1987, I8A, 681.
- (1987) Metall. Trans , pp. 681
- Ahmad, M.¹

119
- 33645917189
- E. A. Starke, Jr & T. J. S&ers, Jr, Warrendale, PA, Metallurgical Society Of AIME
- D. J. Field, G. M. Scamans, & E. P. Butler: In ‘Aluminum- Lithium Alloys II’, (Ed. E. A. Starke, Jr & T. J. S&ers, Jr), 657; 1984, Warrendale, PA, Metallurgical Society Of AIME.
- (1984) In ‘Aluminum- Lithium Alloys II’ , pp. 657
- Field, D.J.¹ Scamans, G.M.² Butler, E.P.³

120
- 33645917189
- T. H. S&ers, Jr & E. A. Starke, Jr, Warrendale, PA, Metallurgical Society Of AIME
- D. J. Field, E. P. Butler, & G. M. Scamans: In ‘Aluminum-Lithium Alloys’, (Ed. T. H. S&ers, Jr & E. A. Starke, Jr), 325; 1980, Warrendale, PA, Metallurgical Society Of AIME.
- (1980) Aluminum-Lithium Alloys , pp. 325
- Field, D.J.¹ Butler, E.P.² Scamans, G.M.³

121
- 0022934276
- London, The Institute Of Metals
- R. F. ASHTON, D. S. THOMPSON, E. A. STARKE, Jr, & F. S. LIN: In ‘Aluminium-Lithium Alloys IIP, (Ed. C. Baker Et Al), 66-77; 1986, London, The Institute Of Metals.
- (1986) ‘Aluminium-Lithium Alloys IIP , pp. 66-77
- Ashton, R.F.¹ Thompson, D.S.² Starke, E.A.³ Lin, F.S.⁴

122
- 0016495733
- J. P. Lyle & W. S. Cebulak: Metall. Trans., 1975, 6A, 685-699.
- (1975) Metall. Trans. , vol.6 , pp. 685-699
- Lyle, J.P.¹ Cebulak, W.S.²

123
- 84938947970
- Consolidation Processing & Alternative Processing Methods For Powder Metallurgy Al-Cu-Mg-XX Alloys
- K. K. Sankaran: ‘Consolidation Processing & Alternative Processing Methods For Powder Metallurgy Al-Cu-Mg-XX Alloys’, NASA Contractor Rep. 178227, Feb. 1987.
- (1987) NASA Contractor Rep. 178227
- Sankaran, K.K.¹

124
- 0023349708
- E. Lavernia & N. J. Grant: J. Mater. Sci., 1987, 22, 1521-1529.
- (1987) J. Mater. Sci. , vol.22 , pp. 1521-1529
- Lavernia, E.¹ Grant, N.J.²

125
- 0022712966
- E. Lavernia, G. Rai, & N. J. Grant: Mater. Sci. Eng., 1986, 79, 211-221.
- (1986) Mater. Sci. Eng. , vol.79 , pp. 211-221
- Lavernia, E.¹ Rai, G.² Grant, N.J.³

126
- 33645917189
- Warrendale, PA, Metallurgical Society Of AIME
- I. G. Palmer, R. E. Lewis, & D. D. Crooks: In ‘Aluminum- Lithium Alloys’, (Ed. T. H. S&ers, Jr & E. A. Starke, Jr), 241-262; 1981, Warrendale, PA, Metallurgical Society Of AIME.
- (1981) In ‘Aluminum- Lithium Alloys’ , pp. 241-262
- Palmer, I.G.¹ Lewis, R.E.² Crooks, D.D.³

127
- 84914777551
- E. A. Starke, Jr & T. H. S&ers, Jr, Warrendale, PA, Metallurgical Society Of AIME
- P. J. Meschter, J. E. O’neil, & R. J. Lederich: In ‘Aluminum- Lithium Alloys II’, (Ed. E. A. Starke, Jr & T. H. S&ers, Jr), 419-432; 1984, Warrendale, PA, Metallurgical Society Of AIME.
- (1984) In ‘Aluminum- Lithium Alloys II’ , pp. 419-432
- Meschter, P.J.¹ O’Neil, J.E.² Lederich, R.J.³

128
- 84975005107
- R. J. KAR, J. W. BOHLEN, & G. R. Chanani: Mater. Sci. Eng., 1986, 79, 255-285.
- (1986) Mater. Sci. Eng. , vol.79 , pp. 255-285
- Kar, R.J.¹ Bohlen, J.W.² Chanani, G.R.³

129
- 84975001236
- Stone Mountain, GA, May
- D. WEBSTER: In Proc. 5th Int. TMS-AIME Non-Ferrous Metals Conf., Stone Mountain, GA, May 1980.
- (1980) In Proc. 5Th Int. TMS-AIME Non-Ferrous Metals Conf
- Webster, D.¹

130
- 33645917189
- T. H. S&ers, Jr & E. A. Starke, Jr, Warrendale, PA, Metallurgical Society Of AIME
- A. Gysler, R. Crooks, & E. A. Starke: In ‘Aluminum- Lithium Alloys’, (Ed. T. H. S&ers, Jr & E. A. Starke, Jr), 263-291; 1981, Warrendale, PA, Metallurgical Society Of AIME.
- (1981) In ‘Aluminum- Lithium Alloys’ , pp. 263-291
- Gysler, A.¹ Crooks, R.² Starke, E.A.³

131
- 0022099690
- S. Kang & N. J. Grant: Mater. Sci. Eng., 1985, 72, 155.
- (1985) Mater. Sci. Eng. , vol.72 , pp. 155
- Kang, S.¹ Grant, N.J.²

132
- 84935065620
- W. Wang & N. J. Grant: Int. J. Rapid Solid., 1984-85, 1, 155.
- (1984) Int. J. Rapid Solid , vol.1 , pp. 155
- Wang, W.¹ Grant, N.J.²

133
- 0022868876
- M. E. Fine & E. A. Starke, Jr, Philadelphia, PA, American Society For Testing & Materials
- W. M. GRIFFITH, Y.-W. Kim, & F. H. Froes: In ‘Rapidly Solidified Powder Aluminum Alloys’, STP 890, (Ed. M. E. Fine & E. A. Starke, Jr), 283-303; 1986, Philadelphia, PA, American Society For Testing & Materials.
- (1986) Rapidly Solidified Powder Aluminum Alloys, STP 890 , pp. 283-303
- Griffith, W.M.¹ Kim, Y.-W.² Froes, F.H.³

134
- 0020241258
- M. J. Koczak & G. J. Hildeman, Warrendale, PA, Metallurgical Society Of AIME
- J. T. MORGAN, H. BEGEL, S. M. DORAIVELU, L. MATSON, I. Martorell, & J. F. Thomas: In ‘High-Strength Powder Metallurgy Aluminum Alloys’, (Ed. M. J. Koczak & G. J. Hildeman), 193-206; 1982, Warrendale, PA, Metallurgical Society Of AIME.
- (1982) In ‘High-Strength Powder Metallurgy Aluminum Alloys’ , pp. 193-206
- Morgan, J.T.¹ Begel, H.² Doraivelu, S.M.³ Matson, L.⁴ Martorell, I.⁵ Thomas, J.F.⁶

135
- 73049111261
- Metals & Ceramics Information Center, Columbus, OH
- N. J. Grant & R. M. Pelloux: In Proc. 1st Army Materials Technology Conf., Metals & Ceramics Information Center, Columbus, OH, 1972, 317.
- (1972) In Proc. 1St Army Materials Technology Conf. , pp. 317
- Grant, N.J.¹ Pelloux, R.M.²

136
- 0004185052
- Princeton, NJ, Metal Powder Industries Federation
- F. V. Lenel: ‘Powder Metallurgy’, 321-335; 1980, Princeton, NJ, Metal Powder Industries Federation.
- (1980) Powder Metallurgy , pp. 321-335
- Lenel, F.V.¹

137
- 0020088206
- F. V. Lenel & G. S. Ansell: J. Met., 1982, 34, (2), 17-29.
- (1982) J. Met. , vol.34 , Issue.2 , pp. 17-29
- Lenel, F.V.¹ Ansell, G.S.²

138
- 84969776794
- H. C. Neubing: Powder Metall, 1982, 25, (3), 160-164.
- (1982) Powder Metall , vol.25 , Issue.3 , pp. 160-164
- Neubing, H.C.¹

139
- 0344820408
- W. B. James: Int. J. Powder Metall. Powder Technol, 1985, 21, (3), 163-181.
- (1985) Int. J. Powder Metall. Powder Technol , vol.21 , Issue.3 , pp. 163-181
- James, W.B.¹

140
- 84975024022
- B. FERGUSON, A. KUHN, O. D. SMITH, & F. HOFSTATTER: Int. J. Powder Metall. Powder Technol, 1985, 21, (3), 163-181.
- (1985) Int. J. Powder Metall. Powder Technol , vol.21 , Issue.3 , pp. 163-181
- Ferguson, B.¹ Kuhn, A.² Smith, O.D.³ Hofstatter, F.⁴

141
- 0019544931
- D. G. Moriss: Met. Sci., 1981, 15, 116-124.
- (1981) Met. Sci. , vol.15 , pp. 116-124
- Moriss, D.G.¹

142
- 84974982963
- D. Raybould, D. G. Morris, & G. A. Cooper: J. Mater. Sci. Lett., 1979, 14, 1011.
- (1979) J. Mater. Sci. Lett. , vol.14 , pp. 1011
- Raybould, D.¹ Morris, D.G.² Cooper, G.A.³

143
- 0020707951
- D. G. Morris: Mater. Sci. Eng., 1983, 57, 187.
- (1983) Mater. Sci. Eng. , vol.57 , pp. 187
- Morris, D.G.¹

144
- 0022111208
- T. C. PENG, S. M. L. SASTRY, J. E. ONEAL, & D. BRASHER.' Metall. Trans., 1985, 16A, 1445.
- (1985) Metall. Trans. , vol.16 , pp. 1445
- Peng, T.C.¹ Sastry, S.M.L.² Oneal, J.E.³ Brasher, D.⁴

145
- 84974943532
- P. W. Lee & J. H. Moll, Metals Park, OH, American Society For Metals
- D. RAYBOULD, S. UDVARDY, M. ZEDALIS, & S. K. DAS: In ‘Rapidly Solidified Materials: Properties & Processing’, (Ed. P. W. Lee & J. H. Moll), 59-66; 1988, Metals Park, OH, American Society For Metals.
- (1988) In ‘Rapidly Solidified Materials: Properties & Processing’ , pp. 59-66
- Raybould, D.¹ Udvardy, S.² Zedalis, M.³ Das, S.K.⁴

146
- 84974971784
- A. R. E. Singer: Met. Mater., 1970, 4, 246-250, 257.
- (1970) Met. Mater. , vol.246 , Issue.257 , pp. 4
- Singer, A.R.E.¹

147
- 0001075507
- A. R. E. Singer: J. Inst. Met., 1972, 100, 185-190.
- (1972) J. Inst. Met. , vol.100 , pp. 185-190
- Singer, A.R.E.¹

148
- 84975024498
- T. S. Daughery: Powder Metall, 1968, 11, (22), 342-357.
- (1968) Powder Metall , vol.11 , Issue.22 , pp. 342-357
- Daughery, T.S.¹

149
- 73049114331
- R. G. BROOKS, A. G. LEATHAM, J. S. COOMBS, & C. MOORE: Metall. Met. Form., 1977, 9, 1.
- (1977) Metall. Met. Form. , vol.9 , pp. 1
- Brooks, R.G.¹ Leatham, A.G.² Coombs, J.S.³ Moore, C.⁴

150
- 84974934965
- A. R. E. Singer: UK Patent 1 262 471, 1972.
- (1972) UK Patent , vol.1 , Issue.262 , pp. 471
- Singer, A.R.E.¹

151
- 33646383315
- B. Williams: Met. Powder Rep., 1980, 10, 464-466.
- (1980) Met. Powder Rep. , vol.10 , pp. 464-466
- Williams, B.¹

152
- 0020132854
- R. K. Dube: Powder Metall. Int., 1982, 14, 108.
- (1982) Powder Metall. Int. , vol.14 , pp. 108
- Dube, R.K.¹

153
- 0017415722
- R. G. BROOKS, C. MOORE, A. G. LEATHAM, & J. S. COOMBS: Powder Metall, 1977, 20, 100-102.
- (1977) Powder Metall , vol.20 , pp. 100-102
- Brooks, R.G.¹ Moore, C.² Leatham, A.G.³ Coombs, J.S.⁴

154
- 13044252759
- A. R. E. Singer: Met. Powder Rep., 1986, 3, 223-226.
- (1986) Met. Powder Rep. , vol.3 , pp. 223-226
- Singer, A.R.E.¹

155
- 0021828346
- R. W. Evans, A. G. Leatham, & R. G. Brooks: Powder Metall, 28, 13-20.
- Powder Metall , vol.28 , pp. 13-20
- Evans, R.W.¹ Leatham, A.G.² Brooks, R.G.³

156
- 0024753417
- P. S. GRANT, W. T. KIM, B. P. BEWLAY & B. CANTOR: Scr. Metall, 1989, 23, 1651-1656.
- (1989) Scr. Metall , vol.23 , pp. 1651-1656
- Grant, P.S.¹ Kim, W.T.² Bewlay, B.P.³ Cantor, B.⁴

157
- 0023952876
- E. J. Lavernia & N. J. Grant: Mater. Sci. Eng., 1988, 98, 381-394.
- (1988) Mater. Sci. Eng. , vol.98 , pp. 381-394
- Lavernia, E.J.¹ Grant, N.J.²

158
- 0022941258
- E. J. Lavernia, G. W. Mckewan, & N. J. Grant: Prog. Powder Metall, 1986, 42, 457-478.
- (1986) Prog. Powder Metall , vol.42 , pp. 457-478
- Lavernia, E.J.¹ McKewan, G.W.² Grant, N.J.³

159
- 0022875250
- E. J. Lavernia & N. J. Grant: Int. J. Rapid Solid., 1986, 2, (2), 93-106.
- (1986) Int. J. Rapid Solid. , vol.2 , Issue.2 , pp. 93-106
- Lavernia, E.J.¹ Grant, N.J.²

160
- 1342263938
- P. Lee & R. Carbonara, Metals Park, OH, American Society For Metals
- E. J. Lavernia, T. ando, & N. J. Grant: In ‘Rapidly Solidified Materials’, (Ed. P. Lee & R. Carbonara), 29-44; 1986, Metals Park, OH, American Society For Metals.
- (1986) In ‘Rapidly Solidified Materials’ , pp. 29-44
- Lavernia, E.J.¹ Ando, T.² Grant, N.J.³

161
- 84975023169
- Press
- M. GUPTA, F. MOHAMED, & E. J. Lavernia: Metall. Trans. A., 1992, In Press.
- (1992) Metall. Trans. A
- Gupta, M.¹ Mohamed, F.² Lavernia, E.J.³

162
- 84974902686
- Press
- M. Gupta, F. Mohamed, & E. J. Lavernia: Int. J. Rapid Solid., In Press.
- Int. J. Rapid Solid
- Gupta, M.¹ Mohamed, F.² Lavernia, E.J.³

163
- 0024731659
- J. MARINKOVICH, F. MOHAMED, J. R. PICKENS, & E. J. LAVERNIA: J. Met., 1989, 41, (9), 36-41.
- (1989) J. Met. , vol.41 , Issue.9 , pp. 36-41
- Marinkovich, J.¹ Mohamed, F.² Pickens, J.R.³ Lavernia, E.J.⁴

164
- 0022546356
- K. OGATA, E. J. Lavernia, G. Rai, & N. J. Grant: Int. J. Rapid Solid., 1986, 2, (1), 21-35.
- (1986) Int. J. Rapid Solid. , vol.2 , Issue.1 , pp. 21-35
- Ogata, K.¹ Lavernia, E.J.² Rai, G.³ Grant, N.J.⁴

165
- 0023952862
- M. G. CHU, D. K. DENZER, A. K. CHAKRABARTI, & F. R. BILLMAN: Mater. Sci. Eng., 1988, 98, 227-232.
- (1988) Mater. Sci. Eng. , vol.98 , pp. 227-232
- Chu, M.G.¹ Denzer, D.K.² Chakrabarti, A.K.³ Billman, F.R.⁴

166
- 84975006635
- Press
- M. GUPTA, J. JUARE-ZISLAS, W. E. FRAZIER, F. A. MOHAMED, & E. J. Lavernia: Metall. Trans. B, 1992, In Press.
- (1992) Metall. Trans. B
- Gupta, M.¹ Juare-Zislas, J.² Frazier, W.E.³ Mohamed, F.A.⁴ Lavernia, E.J.⁵

167
- 0024611737
- P. MATHUR, D. Apelian, & A. Lawley: Acta Metall, 1989, 37, (2), 429-443.
- (1989) Acta Metall , vol.37 , Issue.2 , pp. 429-443
- Mathur, P.¹ Apelian, D.² Lawley, A.³

168
- 0025383679
- E. J. Lavernia, S. Srivatsan, & F. A. Mohamed: J. Mater. Sci., 1990, 25, 1137-1158.
- (1990) J. Mater. Sci. , vol.25 , pp. 1137-1158
- Lavernia, E.J.¹ Srivatsan, S.² Mohamed, F.A.³

169
- 0038400823
- London, The Institute Of Metals
- C. BAKER, P. J. GREGSON, S. J. Harris, & C. J. Peel (Eds.): ‘Aluminium-Lithiun Alloys IIP; 1986, London, The Institute Of Metals.
- (1986) Aluminium-Lithiun Alloys IIP
- Baker, C.¹ Gregson, P.J.² Harris, S.J.³ Peel, C.J.⁴

170
- 84974943562
- T. H. S&ers, Edgbaston, UK. Materials & Components Engineering Publications
- T. H. S&ers, Jr & E. A. Starke, Jr (Eds.): ‘Proc. 5th Int. Conf. On Aluminium-Lithium Alloys’; 1989, Edgbaston, UK. Materials & Components Engineering Publications.
- (1989) Proc. 5Th Int. Conf. on Aluminium-Lithium Alloys
- Starke, E.A.¹

171
- 0024873831
- Princeton, NJ, Metal Powder Industries Federation
- M. GUPTA, J. MARINKOVICH, F. A. MOHAMED, & E. J. LAVERNIA: In ‘Advances In Powder Metallurgy’, Vol. 1-3, 139-160; 1989, Princeton, NJ, Metal Powder Industries Federation.
- (1989) Advances in Powder Metallurgy , vol.1 , pp. 139-160
- Gupta, M.¹ Marinkovich, J.² Mohamed, F.A.³ Lavernia, E.J.⁴

172
- 84974943542
- LA, Mar. Metallurgical Society Of AIME
- P. J. MESCHTER, R. J. LEDERICH, J. E. ONEAL, E. J. LAVERNIA, & N. J. Grant: Annual Meeting, New Orleans, LA, Mar. Metallurgical Society Of AIME.
- Annual Meeting, New Orleans
- Meschter, P.J.¹ Lederich, R.J.² Oneal, J.E.³ Lavernia, E.J.⁴ Grant, N.J.⁵

173
- 0016109778
- M. A. REYNOLDS & J. G. HARRIS: Aluminium, 1974, 50, 592.
- (1974) Aluminium , vol.50 , pp. 592
- Reynolds, M.A.¹ Harris, J.G.²

174
- 0342840192
- R. J. Towner: Met. Prog., 1958, 73, (5), 70.
- (1958) Met. Prog. , vol.73 , Issue.5 , pp. 70
- Towner, R.J.¹

175
- 84974996031
- New York, Interscience
- S. J. Roberts: In ‘Powder Metallurgy’, (Ed. W. Leszynski), 299; 1961, New York, Interscience.
- (1961) In ‘Powder Metallurgy’ , pp. 299
- Roberts, S.J.¹

176
- 84876123276
- London, The Royal Aeronautical Society
- H. Jones: In ‘Materials In Aerospace’, 97-121; 1986, London, The Royal Aeronautical Society.
- (1986) Materials in Aerospace , pp. 97-121
- Jones, H.¹

177
- 0017453575
- M. V. Hyatt: Aluminio, 1977, 46, 81.
- (1977) Aluminio , vol.46 , pp. 81
- Hyatt, M.V.¹

178
- 84915165405
- R. J. H. Vanhill & G. F. J. A. Van Gestel: Aluminium, 1978, 54, 7.
- (1978) Aluminium , vol.54 , pp. 7
- Vanhill, R.J.H.¹ Van Gestel, G.F.J.A.²

179
- 0021410390
- S. J. Savage & F. H. Froes: J. Met., 1984, 36, (4), 20.
- (1984) J. Met. , vol.36 , Issue.4 , pp. 20
- Savage, S.J.¹ Froes, F.H.²

180
- 0021407671
- R. W. JECH, T. J. MOORE, T. K. GLASGOW, & N. W. ORTH: J. Met., 1984, 36, (4), 41.
- (1984) J. Met. , vol.36 , Issue.4 , pp. 41
- Jech, R.W.¹ Moore, T.J.² Glasgow, T.K.³ Orth, N.W.⁴

181
- 0022712966
- E. J. Lavernia, G. Rai, & N. J. Grant: Mater. Sci. Eng., 1985, 79, (2), 211-221.
- (1985) Mater. Sci. Eng. , vol.79 , Issue.2 , pp. 211-221
- Lavernia, E.J.¹ Rai, G.² Grant, N.J.³

182
- 0022298810
- Amsterdam, The Netherl&s, Elsevier Science Publ
- J. R. Pickens: In ‘Rapidly Quenched Metals V’, (Ed. S. Steeb & H. Warlimont), Vol. 2, 1711-1718; 1985, Amsterdam, The Netherl&s, Elsevier Science Publ.
- (1985) Rapidly Quenched Metals V , vol.2 , pp. 1711-1718
- Pickens, J.R.¹

183
- 0016507571
- J. P. H. A. Dur&, R. M. Pelloux, & N. J. Grant: Mater. Sci. Eng., 1976, 23, 247-256.
- (1976) Mater. Sci. Eng. , vol.23 , pp. 247-256
- Dur&, J.P.H.A.¹ Pelloux, R.M.² Grant, N.J.³

184
- 0005789768
- R. Mehrabian Et Al, Baton Rouge, LA, Claitor’s Publ. Division
- V. An&, A. J. Kaufman, & N. J. Grant: In ‘Rapid Solidification Processing: Principles & Technologies II’, (Ed. R. Mehrabian Et Al), 273-286; 1980, Baton Rouge, LA, Claitor’s Publ. Division.
- (1980) In ‘Rapid Solidification Processing: Principles & Technologies II’ , pp. 273-286
- An&, V.¹ Kaufman, A.J.² Grant, N.J.³

185
- 0002430091
- H. Matyja, B. C. Giessen, & N. J. Grant: J. Inst. Met., 1968, 96, 30-32.
- (1968) J. Inst. Met. , vol.96 , pp. 30-32
- Matyja, H.¹ Giessen, B.C.² Grant, N.J.³

186
- 49949149057
- R. C. Ruhl: Mater. Sci. Eng., 1967, 1, 313-320.
- (1967) Mater. Sci. Eng. , vol.1 , pp. 313-320
- Ruhl, R.C.¹

187
- 0024656929
- E. J. Lavernia & J. Baram: J. Mater. Sci. Lett., 1989, 8, 612-614.
- (1989) J. Mater. Sci. Lett. , vol.8 , pp. 612-614
- Lavernia, E.J.¹ Baram, J.²

188
- 49049125920
- P. DOMALAVAGE, C. ASHDOWN, R. C. OHANDLEY, & N. J. Grant: Mater. Sci. Eng. Lett., 1983, 57, L1-L2.
- (1983) Mater. Sci. Eng. Lett. , vol.57 , pp. L1-L2
- Domalavage, P.¹ Ashdown, C.² Ohandley, R.C.³ Grant, N.J.⁴

189
- 0020799664
- P. Domalavage, N. J. Grant, & Y. Gefen: Metall. Trans., 14A, 1599-1606.
- Metall. Trans. , vol.14 , pp. 1599-1606
- Domalavage, P.¹ Grant, N.J.² Gefen, Y.³

190
- 84975006664
- P. A. Tove: US Patent 3 067 956, 1962.
- (1962) US Patent , vol.3 , Issue.67 , pp. 956
- Tove, P.A.¹

191
- 84975006654
- E. O. F. Nilson: US Patent 3 302 892, 1967.
- (1967) US Patent , vol.3 , Issue.302 , pp. 892
- Nilson, E.O.F.¹

192
- 84975011356
- Progress Rep. No. 2, AFOSR 77-3440, EOARD-TR-79-2, Air Force Office Of Scientific Research, Washington, DC
- D. P. Voss: ‘Development Of Improved High Strength Aluminum Powder Metallurgy Products’, Progress Rep. No. 2, AFOSR 77-3440, EOARD-TR-79-2, Air Force Office Of Scientific Research, Washington, DC, Dec. 1976.
- (1976) Development of Improved High Strength Aluminum Powder Metallurgy Products
- Voss, D.P.¹

193
- 84974975195
- Air Force Office Of Scientific Research, Washington, DC
- D. P. Voss: ‘Strength & Mechanical Properties Of Powder Metallurgy 2024 & 7075 Aluminum Alloys’, Final Rep. AFOSR-77-3440, EOARD-TR-79-1, Air Force Office Of Scientific Research, Washington, DC, Oct. 1979.
- (1979) Strength & Mechanical Properties of Powder Metallurgy 2024 & 7075 Aluminum Alloys, Final Rep. AFOSR-77-3440, EOARD-TR-79-1
- Voss, D.P.¹

194
- 84936489397
- F. H. Froes & J. R. Pickens: J. Met., 1984, 36, (1), 14-28.
- (1984) J. Met. , vol.36 , Issue.1 , pp. 14-28
- Froes, F.H.¹ Pickens, J.R.²

195
- 0016080030
- M. Lebo & N. J. Grant: Metall. Trans., 1974, 5, 1547-1555.
- (1974) Metall. Trans. , vol.5 , pp. 1547-1555
- Lebo, M.¹ Grant, N.J.²

196
- 0022062061
- L. Christodoulou, J. R. Gordon, & J. R. Pickens: Metall. Trans., 1985, 16A, 945-951.
- (1985) Metall. Trans. , vol.16 , pp. 945-951
- Christodoulou, L.¹ Gordon, J.R.² Pickens, J.R.³

197
- 0016495733
- J. P. Lyle & W. S. Cebulak: Metall. Trans., 1975, 6A, 685-699.
- (1975) Metall. Trans. , vol.6 , pp. 685-699
- Lyle, J.P.¹ Cebulak, W.S.²

198
- 0017012342
- W. S. Cebulak, E. W. Johnson, & H. Markus: Int. J. Powder Metall. Powder Technol., 1976, 12, 299.
- (1976) Int. J. Powder Metall. Powder Technol. , vol.12 , pp. 299
- Cebulak, W.S.¹ Johnson, E.W.² Markus, H.³

199
- 84975027248
- Scd Thesis
- E. Ting: Scd Thesis, Massachusetts Institute Of Technology, 1984.
- (1984) Massachusetts Institute of Technology
- Ting, E.¹

200
- 84974905586
- Massachusetts Institute Of Technology
- W. W. Webster: MS Thesis, Massachusetts Institute Of Technology, 1982.
- (1982) Thesis
- Webster, W.W.¹

201
- 0020237823
- M. J. Koczak & G. J. Hildeman, Warrendale, PA, Metallurgical Society Of AIME
- M. Rafalin, A. Lawley, & M. J. Koczak: In ‘High-Strength Powder Metallurgy Aluminum Alloys’, (Ed. M. J. Koczak & G. J. Hildeman), 63; 1982, Warrendale, PA, Metallurgical Society Of AIME.
- (1982) In ‘High-Strength Powder Metallurgy Aluminum Alloys’ , vol.63
- Rafalin, M.¹ Lawley, A.² Koczak, M.J.³

202
- 84974965910
- R. E. Crooks & E. A. Starke, Jr: Metall. Trans., 1984, 15A, 1371-1377.
- (1984) Jr: Metall. Trans. , vol.15 , pp. 1371-1377
- Crooks, R.E.¹ Starke, E.A.²

203
- 0020721998
- V. W. C. Kuo & E. A. Starke, Jr: Metall. Trans., 1983, 14A, 435-477.
- (1983) Jr: Metall. Trans. , vol.14 , pp. 435-477
- Kuo, V.W.C.¹ Starke, E.A.²

204
- 0020764696
- S. Hirose & M. E. Fine: Metall. Trans., 1983, 14A, 1189-1197.
- (1983) Metall. Trans. , vol.14 , pp. 1189-1197
- Hirose, S.¹ Fine, M.E.²

205
- 0018003016
- Metall. Trans., 1978
- R. E. SANDERS, Jr & E. A. Starke, Jr: Metall. Trans., 1978, 9 A, 1087.
- (1978) 9 A
- Sanders, R.E.¹ Starke, E.A.²

206
- 0017478869
- R. E. SANDERS, Jr & E. A. STARK, Jr:E Mater. Sci. Eng., 1977, 28, 53.
- (1977) E Mater. Sci. Eng. , vol.28 , pp. 53
- Sanders, R.E.¹ Stark, E.A.²

207
- 84974956840
- Metals Park, OH, American Society For Metals
- M. E. Fine & R. O. Ritchie: In ‘Fatigue & Microstructure’, (Ed. M. Meshii), 245: 1979, Metals Park, OH, American Society For Metals.
- (1979) In ‘Fatigue & Microstructure’ , vol.245
- Fine, M.E.¹ Ritchie, R.O.²

208
- 0018998371
- F. S. Lin & E. A. Starke, Jr: Mater. Sci. Eng., 1980, 43, 65.
- (1980) Mater. Sci. Eng. , vol.43 , pp. 65
- Lin, F.S.¹ Starke, E.A.²

209
- 84974900411
- Fatigue Resistant Aluminum Powder Metallurgy Alloy Development
- R. E. SANDERS, Jr, W. L. Otto, & R. J. Bucci: ‘Fatigue Resistant Aluminum Powder Metallurgy Alloy Development’, AFML Contract No. F33615-77-C-5174, June 1979.
- (1979) AFML Contract No. F33615-77-C-5174
- Sanders, R.E.¹ Otto, W.L.² Bucci, R.J.³

210
- 84974900435
- Warrendale, PA, Metallurgical Society Of AIME
- K. K. Sankaran & N. J. Grant: In ‘Aluminum-Lithium Alloys’, (Ed. T. H. S&ers, Jr & E. A. Starke, Jr), 101; 1981, Warrendale, PA, Metallurgical Society Of AIME.
- (1981) In ‘Aluminum-Lithium Alloys’ , vol.101
- Sankaran, K.K.¹ Grant, N.J.²

211
- 0018737957
- S. B. Chakrabortty: Fatigue Eng. Mater. Struct., 1979, 2, 331.
- (1979) Fatigue Eng. Mater. Struct. , vol.2 , pp. 331
- Chakrabortty, S.B.¹

212
- 84974900487
- Sept, US Air Force Wright Aeronautical Laboratories, OH
- S. H. Doerr: ‘A Comparison Of Microstructure & Properties Of Equivalent Strength Ingot Metallurgy & Powder Metallurgy 7XXX Aluminum Alloys’, Final Rep. AFWAL-TR-81- 4068, Sept. 1980, US Air Force Wright Aeronautical Laboratories, OH.
- (1980) A Comparison of Microstructure & Properties of Equivalent Strength Ingot Metallurgy & Powder Metallurgy 7XXX Aluminum Alloys, Final Rep. AFWAL-TR-81- , vol.4068
- Doerr, S.H.¹

213
- 84974958395
- Warrendale, PA, Metallurgical Society Of AIME
- S. L. Langenbeck: In ‘High-Strength Powder Metallurgy Aluminum Ailoys’, (Ed. M. J. Koczak & G. J. Hildeman), 87; 1982, Warrendale, PA, Metallurgical Society Of AIME.
- (1982) In ‘High-Strength Powder Metallurgy Aluminum Ailoys’ , vol.87
- Langenbeck, S.L.¹

214
- 84974890264
- Warrendale, PA, Metallurgical Society Of AIME
- Y. W. Kim & L. R. Bid Well: In ‘High-Strength Powder Metallurgy Aluminum Alloys’, (Ed. M. J. Koczak & G. J. Hildeman), 107; 1982, Warrendale, PA, Metallurgical Society Of AIME.
- (1982) In ‘High-Strength Powder Metallurgy Aluminum Alloys’ , vol.107
- Kim, Y.W.¹ Bid Well, L.R.²

215
- 0006967301
- R. C. Bates & W. G. Clarke, Jr: Trans. ASM, 1968, 62, (2), 380.
- (1968) Trans. ASM , vol.62 , Issue.2 , pp. 380
- Bates, R.C.¹ Clarke, W.G.²

216
- 0011101556
- Warrendale, PA, Metallurgical Society Of AIME
- E. J. COYNE, T. H. SANDERS & E. A. STARKE, Jr: In ‘Aluminum-Lithium Alloys’, (Ed. T. H. S&ers, Jr & E. A. Starke, Jr), 293; 1981, Warrendale, PA, Metallurgical Society Of AIME.
- (1981) Aluminum-Lithium Alloys , pp. 293
- Coyne, E.J.¹ Sanders, T.H.² Starke, E.A.³

217
- 0021425603
- A. K. VASUDEVAN, P. E. BRETZ, A. C. MILLER, & S. SURESH: Mater. Sci. Eng., 1984, 64, 113.
- (1984) Mater. Sci. Eng. , vol.64 , pp. 113
- Vasudevan, A.K.¹ Bretz, P.E.² Miller, A.C.³ Suresh, S.⁴

218
- 0023983927
- K. T. Venkateswara RAO, W. Yu, & R. O. Ritchie: Metall. Trans., 1988, 19A, 549-561.
- (1988) Metall. Trans. , vol.19 , pp. 549-561
- Venkateswara, K.T.¹ Rao, W.Y.² Ritchie, R.O.³

219
- 84974958373
- Press
- K. T. VENKATESWARA, W. YU, & R. O. RITCHIE: Eng. Fract. Mech., In Press.
- Eng. Fract. Mech
- Venkateswara, K.T.¹ Yu, W.² Ritchie, R.O.³

220
- 84974936699
- Development Of Advanced Aluminum Alloys From Rapidly Solidified Powders For Aerospace Structural Applications
- R. E. Lewis: ‘Development Of Advanced Aluminum Alloys From Rapidly Solidified Powders For Aerospace Structural Applications’, Interim Technical Rep., AFML-TR-81XX, Mar. 1981.
- (1981) Interim Technical Rep., AFML-TR-81XX
- Lewis, R.E.¹

221
- 84974938607
- R. E. Sanders & W. L. Otto, Jr: Prog. Powder Metall, 1975, 35, 295.
- (1975) Prog. Powder Metall , vol.35 , pp. 295
- Sanders, R.E.¹ Otto, W.L.²

222
- 69849106742
- Metals Park, OH, American Society For Metals
- T. E. Tietz & I. G. Palmer: In ‘Advances In Powder Technology’, (Ed. G. Y. Chin), 189; 1981, Metals Park, OH, American Society For Metals.
- (1981) In ‘Advances in Powder Technology’ , pp. 189
- Tietz, T.E.¹ Palmer, I.G.²

223
- 0022737971
- D. J. Skinner, R. L. Bye, D. Raybould, & A. M. Brown: Scr. Metall, 1986, 20, 867.
- (1986) Scr. Metall , vol.20 , pp. 867
- Skinner, D.J.¹ Bye, R.L.² Raybould, D.³ Brown, A.M.⁴

224
- 0007708903
- R. Irmann: Tech. Rund., 1949, 41, 19.
- (1949) Tech. Rund. , vol.41 , pp. 19
- Irmann, R.¹

225
- 0346288482
- A. Von Zeerledor: Z. Metallkd., 1950, 41, 228.
- (1950) Z. Metallkd. , vol.41 , pp. 228
- Von Zeerledor, A.¹

226
- 0342840192
- R. J. Towner: Met. Prog., 1958, 73, (5), 70.
- (1958) Met. Prog. , vol.73 , Issue.5 , pp. 70
- Towner, R.J.¹

227
- 0009148611
- Warrendale, PA, Metallurgical Society Of AIME
- M. E. Fine: In ‘Dispersion Strengthened Aluminum Alloys’, (Ed. Y. W. Kim & W. M. Griffith), 103; 1988, Warrendale, PA, Metallurgical Society Of AIME.
- (1988) In ‘Dispersion Strengthened Aluminum Alloys’ , pp. 103
- Fine, M.E.¹

228
- 51649184263
- M. E. Fine: Metall. Trans., 1975, 6A, 625.
- (1975) Metall. Trans. , vol.6 , pp. 625
- Fine, M.E.¹

229
- 84974960998
- In Symp
- Charlottesville, VA, June
- C. Adam: In Symp. ‘Aluminum Alloys - Their Physical & Mechanical Properties’, Charlottesville, VA, June 1986, Aluminum Association.
- (1986) Aluminum Alloys - Their Physical & Mechanical Properties
- Adam, C.¹

230
- 0003416277
- Warrendale, PA, Metallurgical Society Of AIME
- D. J. Skinner: In ‘Dispersion Strengthened Aluminum Alloys’, (Ed. Y. W. Kim & W. M. Griffith), 181; 1988, Warrendale, PA, Metallurgical Society Of AIME.
- (1988) In ‘Dispersion Strengthened Aluminum Alloys’ , pp. 181
- Skinner, D.J.¹

231
- 0003416277
- Warrendale, PA, Metallurgical Society Of AIME
- W.-Y. Kim: In ‘Dispersion Strengthened Aluminum Alloys’, (Ed. Y. W. Kim & W. M. Griffith), 157; 1988, Warrendale, PA, Metallurgical Society Of AIME.
- (1988) In ‘Dispersion Strengthened Aluminum Alloys’ , pp. 157
- Kim, W.-Y.¹

232
- 84974900457
- Elevated Temperature Aluminum Development
- S. L. Langenbeck, R. A. Rainien, R. F. Simenz, G. G. WALD, & E. J. Himmel: ‘Elevated Temperature Aluminum Development’, AFWAL-TR-86-4027, 1986.
- (1986) AFWAL-TR-86-4027
- Langenbeck, S.L.¹ Rainien, R.A.² Simenz, R.F.³ Wald, G.G.⁴ Himmel, E.J.⁵

233
- 0003416277
- Warrendale, PA, Metallurgical Society Of AIME
- I. G. Palmer, M. P. Thomas, & G. J. Marshall: In ‘Dispersion Strengthened Aluminum Alloys’, (Ed. Y. W. Kim & W. M. Griffith), 213; 1988, Warrendale, PA, Metallurgical Society Of AIME.
- (1988) In ‘Dispersion Strengthened Aluminum Alloys’ , pp. 213
- Palmer, I.G.¹ Thomas, M.P.² Marshall, G.J.³

234
- 0001768707
- Monograph & Rep. Series, No. 5, London, The Institute Of Metals
- E. Orowan: In ‘Symposium On Internal Stress In Metals & Alloys’, Monograph & Rep. Series, No. 5, Disc. 451-453; 1948, London, The Institute Of Metals.
- (1948) Symposium on Internal Stress in Metals & Alloys , pp. 451-453
- Orowan, E.¹

235
- 0002845136
- M. F. Ashby: Z. Metallkd., 1964, 55, 5.
- (1964) Z. Metallkd. , vol.55 , pp. 5
- Ashby, M.F.¹

236
- 0003416277
- Warrendale, PA, Metallurgical Society Of AIME
- D. Y. Yee & D. E. Zupon: In ‘Dispersion Strengthened Aluminum Alloys’, (Ed. Y. W. Kim & W. M. Griffith), 265; 1988, Warrendale, PA, Metallurgical Society Of AIME.
- (1988) In ‘Dispersion Strengthened Aluminum Alloys’ , pp. 265
- Yee, D.Y.¹ Zupon, D.E.²

237
- 0003416277
- Warrendale, PA, Metallurgical Society Of AIME
- K. S. Chan: In ‘Dispersion Strengthened Aluminum Alloys’, (Ed. Y. W. Kim & W. M. Griffith); 1988, Warrendale, PA, Metallurgical Society Of AIME.
- (1988) In ‘Dispersion Strengthened Aluminum Alloys’
- Chan, K.S.¹

238
- 0003416277
- Warrendale, PA, Metallurgical Society Of AIME
- D. Raybould: In ‘Dispersion Strengthened Aluminum Alloys’, (Ed. Y. W. Kim & W. M. Griffith), 199; 1988, Warrendale, PA, Metallurgical Society Of AIME.
- (1988) In ‘Dispersion Strengthened Aluminum Alloys’ , pp. 199
- Raybould, D.¹

239
- 0025383428
- H. H. Smith & D. J. Michel: Metall. Trans., 1990, 21 A, 499.
- (1990) Metall. Trans , vol.21 , pp. 499
- Smith, H.H.¹ Michel, D.J.²

240
- 0024767880
- H. H. Smith, D. J. Michel, & J. R. Reed: Metall. Trans., 1989, 20A, 2425.
- (1989) Metall. Trans , vol.20 , pp. 2425
- Smith, H.H.¹ Michel, D.J.² Reed, J.R.³

241
- 84975025296
- Morristown, NJ
- Allied Signal Inc., Morristown, NJ, 1989.
- (1989) Allied Signal Inc

242
- 84974943532
- P. W. Lee & J. H. Moll, Metals Park, OH, Metals ASM International
- D. RAYBOULD, M. ZEDALIS, S. K. DAS, & S. UDVARDY: In ‘Rapidly Solidified Materials: Properties & Processing’, (Ed. P. W. Lee & J. H. Moll), 59; 1988, Metals Park, OH, Metals ASM International.
- (1988) In ‘Rapidly Solidified Materials: Properties & Processing’ , vol.59
- Raybould, D.¹ Zedalis, M.² Das, S.K.³ Udvardy, S.⁴

243
- 84975021980
- J. D. Ayers: US Patent 4 775 000, 1988.
- (1988) US Patent , vol.4 , Issue.775
- Ayers, J.D.¹

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.