Plasma spectrometry in the earth sciences: techniques, applications and future trends

Chemical Geology

Volumn 95, Issue 1-2, 1992, Pages 1-33

  Jarvis, Ian ^a   Jarvis, Kym E ^b  

^a KINGSTON UNIVERSITY   (United Kingdom)

^b UNIVERSITY OF LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

GEOCHEMICAL TECHNIQUE; ICP-AES; ICP-MS; PLASMA SPECTROMETRY;

EID: 0026453718     PISSN: 00092541     EISSN: None     Source Type: Journal    
DOI: 10.1016/0009-2541(92)90041-3     Document Type: Article

References (116)

1. Evaluation and application of reference materials for the analysis of rocks and minerals
2. Semiquantitative analysis by inductively coupled plasma mass spectrometry
3. High precision (< 0.5% RSD) in routine analysis by ICP using a high pressure (200 psig) cross-flow nebulizer
4. Gold analyses-myths, frauds and truths
5. Investigations on mixed gas plasmas produced using a sheathing device in ICP-MS
6. Study of the effects of concomitant elements in inductively coupled plasma mass spectrometry
7. Determination of trace metals in an open ocean water reference material by inductively coupled plasma mass spectrometry
8. Determination of metal-organic associations in soil leachates by inductively coupled plasma-mass spectrometry
9. Correlation study of internal standardization in inductively coupled plasma atomic emission spectrometry
10. Automated analysis of geological materials: what, how, why
11. Induction plasma modelling: state of the art
12. Plasma modelling and computer simulation
13. Detection limits of about 350 prominent lines of 65 elements observed in 50- and 27-MHz inductively coupled plasmas (ICP): effects of source characteristics, noise and spectral bandwidth — “Standard” values for the 50-MHz ICP
14. A spectral line atlas for the determination of trace, minor and major elements in geological materials-an update and overview
15. A new approach to the determination of the major and minor constituents in silicate and phosphate rocks
16. Application of an argon-nitrogen inductively coupled radiofrequency plasma (ICP) to the analysis of geological and related materials for their rare earth contents
17. Sample introduction techniques for atomic spectroscopy
18. Flow injection analysis: a novel tool for plasma spectroscopy
19. Determination of gold, platinum, paladium and silver in geological samples by inductively coupled plasma atomic emission spectrometry after poly(dilithiocarbamate) resin pretreatment
20. Multielement extraction system for the determination of 18 trace elements in geochemical samples
21. Back-extraction of trace elements from organometallic-halide extracts for determination by flameless atomic absorption spectrometry
22. Determination of rare earth elements in geological materials by inductively coupled plasma/atomic emission spectrometry
23. Determination of elements in National Bureau of Standards geological reference materials SRM 278 obsidian and SRM 688 basalt by inductively coupled argon plasma-atomic emission spectrometry
24. The potential of fire assay and inductively coupled-plasma mass spectrometry for the determination of platinum group elements in geological materials
25. Some analytical characteristics of a three-electrode dc argon plasma source for optical emission spectrometry
26. The determination of precious metals in geological samples by ICP-mass spectrometry
27. What makes coffee coffee-er, houses cozier, breathing easier?—It's Superspray!
28. Application of flow injection sample introduction to inductively coupled plasma-mass spectrometry for geochemical analysis
29. A selected bibliography and review of direct current plasma-optical emission spectrometry
30. Simple approach to reducing polyatomic ion interferences on arsenic and selenium in ICP-MS
31. Current and potential applications of inductively coupled plasma (ICP)-atomic emission spectroscopy (AES) in the exploration mining and processing of materials
32. The efficiency of various digestion procedures on the extraction of metals from rocks and rock-forming minerals
33. Non spectroscopic interelement interferences in inductively coupled plasma mass spectrometry
34. The origins, realization and performance of ICP-MS systems
35. Determination of platinum, palladium, ruthenium and iridium in geological materials by inductively coupled plasma-mass spectrometry with sample introduction by electrothermal vaporisation
36. Nebulization of slurries and suspensions of geological materials by inductively coupled plasma-atomic emission spectrometry
37. Inductively coupled plasma-mass spectrometry
38. Are your REE results total?
39. Analysis of standard reference materials for Zr Nb Hf and Ta by ICP-MS after lithium metaborate fusion and cupferron separation
40. Analytical errors in the determination of high field strength elements and their implications in tectonic interpretation studies
41. Application of geochemical discrimination diagrams for the tectonic interpretation of igneous rocks hosting gold mineralisation in the Canadian Shield
42. Determination of zirconium, niobium, hafnium and tantalum at low levels in geological materials by inductively coupled plasma-mass spectrometry
43. Trace-element chemistry of non-marine ostracods as a means of palaeolimnological reconstruction: An example from the Quaternary of Kashmir, northern India
44. Determination of the precious metals in geological materials by inductively coupled plasma-mass spectrometry (ICP-MS) with nickel sulphide fire-assay collection and tellurium co-precipitation
45. Sample preparation for ICP-MS
46. Rare-earth element geochemistry of standard sediments: a study using inductively coupled plasma spectrometry
47. Inductively coupled plasma-atomic emission spectrometry in exploration geochemistry
48. A comparison of internal and external drift correction procedures to compensate for analyte signal change in ICP spectrometry
49. Inductively coupled plasma-mass spectrometry, a new technique for the rapid or ultra trace level determination of the rare earth elements in geological materials
50. Determination of rare earth elements in geological samples by inductively coupled plasma mass spectrometry
51. Role of slurry nebulisation for the analysis of geological samples by inductively coupled plasma spectrometry
52. Determination of the rare-earth elements and yttrium in 37 international silicate reference materials by inductively coupled plasma-atomic emission spectrometry
53. Plasma Source Mass Spectrometry
54. Inductively coupled plasma-optical emission spectroscopy—Excitation temperatures experienced by analyte species
55. An improved pneumatic nebulizer for use at low nebulizer gas flows
56. Flow injection analysis with inductively coupled plasma-atomic emission spectroscopy: critical comparison of conventional pneumatic, ultrasonic and direct injection nebulization
57. Thermal vaporization for inductively coupled plasma optical emission spectrometry, a review
58. A clog-free nebulizer for use in inductively coupled plasma-atomic emission spectroscopy
59. Determination of trace elements in sea water by inductively coupled plasma-mass spectrometry with preconcentration on silica-immobilized 8-hydroxyquinoline
60. The concentric glass nebulizer
61. Maintenance tips for users of the concentric glass nebulizer
62. Iron spectrum in the 200–300 nm range emitted by an inductively coupled argon plasma
63. Laser microanalysis of geological samples by atomic emission spectrometry (LM-AES) and inductively coupled plasma-atomic emission spectrometry (LM-ICP-AES)
64. An exploration geochemical technique for the determination of preconcentrated organometallic halides by ICP-AES
65. Improvement of the energy transfer with added hydrogen in ICP-AES
66. Improved performance using internal standardization in inductively coupled plasma emission spectroscopy
67. Inductively coupled plasma emission lines in the vacuum ultraviolet
68. Trace element discrimination diagrams for the tectonic interpretation of igneous rocks
69. Introduction of gaseous hydrides into an inductively coupled plasma mass spectrometer
70. Strategies of multielement calibration for maximising the accuracy of geochemical analysis by inductively coupled plasma-atomic emission spectrometry
71. Correlated variance in simultaneous inductively coupled plasma atomic emission spectrometry: its causes and correction by parameter related internal standard method
72. High-accuracy analysis by inductively coupled plasma atomic emission spectrometry using the parameter related internal standard method
73. Rock analysis using inductively coupled plasma mass spectrometry a review
74. Rare-earth element composition of Devonian sediments from southern Belgium: application of an inductively coupled plasma-atomic emission spectrometry method
75. A comparison of atomic spectroscopic techniques: atomic absorption, inductively coupled plasma and direct current plasma
76. Determination of trace and ultratrace amounts of noble metals in geological and related materials by graphite furnace atomic absorption spectrometry after separation by ion exchange or coprecipitation with tellurium
77. Rare-earth elements in marine sediments and geochemical standards
78. Analysis of lithium and boron by inductively coupled plasma mass spectrometry
79. Background spectral features in inductively coupled plasma/mass spectrometry
80. Water resources
81. Simultaneous determination of trace constituents of arsenic, antimony, bismuth, selenium and tellurium in aqueous solution by introduction of the gaseous hydrides into an inductively coupled plasma source for emission spectrometry. Part I. Preliminary studies
82. Simultaneous determination of trace constituents of arsenic, antimony, bismuth, selenium and tellurium in aqueous solution by introduction of the gaseous hydrides into an inductively coupled plasma source for emission spectrometry, Part II. Interference studies
83. An assessment of dissolution techniques for the analysis of geological samples by plasma spectrometry
84. Whole rock analysis by inductively coupled plasma spectrometry
85. Use of multiple internal standards for high-precision, routine analysis of geological samples by inductively coupled plasma-atomic emission spectrometry
86. An evaluation of the performance of an inductively coupled plasma source spectrometer for the determination of the major and trace constituents of silicate rocks and minerals
87. The simultaneous determination of the rare earth elements in rocks using inductively coupled plasma source spectrometry
88. Performance of a commercial maximum dissolved solids nebulizer for inductively coupled plasma spectrometry
89. Lead hydride generation for isotope analysis by inductively coupled plasma mass spectrometry
90. Determination of rareearth elements scandium yttrium and hafnium in 32 geochemical reference materials using inductively coupled plasma-atomic emission spectrometry
91. Determination of rareearth elements, yttrium, scandium and hafnium using cation-exchange separation and inductively coupled plasma-atomic emission spectrometry
92. Experimentally obtained wavelength tables for the ICP
93. Atomic emission sources for solution spectrochemistry