Fuzzy Logic in Control Systems: Fuzzy Logic Controller, Part II

IEEE Transactions on Systems, Man and Cybernetics

Volumn 20, Issue 2, 1990, Pages 419-435

  Lee, Chuen Chien ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DECISION THEORY AND ANALYSIS; MATHEMATICAL TECHNIQUES--FUZZY SETS; PROCESS CONTROL; VEHICLES--NAVIGATION SYSTEMS;

DECISION MAKING LOGIC; DEFUZZIFICATION STRATEGIES; FUZZY INTERFERENCE MECHANISMS; FUZZY LOGIC CONTROLLER;

CONTROL SYSTEMS;

EID: 0025405010     PISSN: 00189472     EISSN: 21682909     Source Type: Journal    
DOI: 10.1109/21.52552     Document Type: Article

References (150)

1. N. BaakJini and E. H. Mamdani, “Prescriptive methods for deriving control policy in a fuzzy-logic controller,” Electron. Lett., vol. 11, pp. 625–626, 1975.
2. J. Baldwin and N. Guild, “Modeling controllers using fuzzy relations,” Kybemetes, vol. 9, pp. 223–229, 1980.
3. J. F. Baldwin and B. W. Pilsworth, “Axiomatic approach to implication for approximate reasoning with fuzzy logic,” Fuzzy Sets Syst., vol 3, pp. 193–219, 1980.
4. J. A. Bernard, “Use of rule-based system for process control,” IEEE Contr. Syst. Mag., vol. 8, no. 5, pp. 3–13, 1988.
5. M. Braae and D. A. Rutherford, “Fuzzy relations in a control setting,” Kybemetes, vol. 7, no. 3, pp. 185–188, 1978.
6. —, “Theoretical and linguistic aspects of the fuzzy logic controller,” Automat., vol. 15, no 5, pp. 553–577, 1979.
7. —, “Section of parameters for a fuzzy logic controller,” Fuzzy Sets Syst., vol. 2, no. 3, pp. 185–199, 1979.
8. K. Ciliz, J. Fei, K. Usluel, and C. Isik, “Pratical aspects of the knowledge-based control of a mobile robot motion,” in Proc. 30th Midwest Symp. on Circuits and Systems, Syracuse, NY, 1987.
9. E. Czogala, Probabilistic Sets in Decision Making and Control. Cologne: Verlag TUV Rheinland, 1984.
10. E. Czogala, “Probabilistic fuzzy controller as a generalization of the concept of fuzzy controller,” Fuzzy Sets Syst., vol. 26, pp. 215–223, 1988.
11. E. Czogala and K. Hirota, Probabilistic Sets: Fuzzy and Stochastic Approach to Decision, Control and Recognition Processes. Cologne: Verlag TUV Rheinland, 1986.
12. E. Czogala and W. Pedrycz, “Some problems concerning the construction of algorithms of decision-making in fuzzy systems,” Int. J. Man. Mach. Studies, vol. 15, pp. 201–221, 1981.
13. —, “On identification in fuzzy systems and its applications in control problems,” Fuzzy Sets Syst., vol. 6, no. 1, pp. 73–83, 1981.
14. —, “Control problems in fuzzy systems,” Fuzzy Sets Syst., vol. 7, no. 3, pp. 257–274, 1982.
15. —., “Fuzzy rule generation for fuzzy control,” Cybern. Syst., vol. 13, no. 3, pp. 275–293, 1982.
16. E. Czogala and T. Rawlik, “Modelling of a fuzzy controller with application to the control of biological processes,” Fuzzy Sets Syst., vol. 31, pp. 13–22, 1989.
17. B. Bharathi Devi and V. V. S. Sarma, “Estimation of fuzzy memberships from histograms,” Inform. Sci., vol. 35, pp. 43–59, 1985.
18. D. Dubois and H. Prade, “Fuzzy logics and the generalized modus ponens revisited,” Cybern. Syst., vol. 15, pp. 3–4, 1984.
19. —, “The generalized modus ponens under sup-min composition—A theoretical study,” in Approximate Reasoning in Expert Systems, M. M. Gupta, A. Kandel, W. Bandler, and J. B. Kiszka, Eds. Amsterdam: North-Holland, 1985, pp. 217–232.
20. —, “Unfair coins and necessity measures: Toward a possibilistic interpretation of histograms,” Fuzzy Sets Syst., vol. 10, no. 1, pp. 15–20, 1985.
21. —, Possibility Theory: An Approach to Computerized Processing of Uncertainty. New York: Plenum Press, 1988.
22. J. Efstathiou, “Rule-based process control using fuzzy logic,” in Approximate Reasoning in Intelligent Systems, Decision and Control, E. Sanchez and L. A. Zadeh, Eds. New York: Pergamon, 1987, pp. 145–158.
23. F. Fujitec, “FLEX-8800 series elevator group control system,” Fujitec Co., Ltd., Osaka, Japan, 1988.
24. S. Fukami, M. Mizumoto, and K. Tanaka, “Some considerations of fuzzy conditional inference,” Fuzzy Sets Syst., vol. 4, pp. 243–273, 1980.
25. B. R. Gaines and L. J. Kohout, “The fuzzy decade: A bibliography of fuzzy systems and closely related topics,” Int. J. Man. Mach. Studies, vol. 9, pp. 1–68, 1977.
26. S. Gottwald and W. Pedrycz, “Problems of the design of fuzzy controllers,” in Approximate Reasoning in Expert Systems, M. M. Gupta, A. Kandel, W. Bandler, and J. B. Kiszka, Ed. Amsterdam: North-Holland, 1985, pp. 393–405.
27. B. P. Graham and R. B. Newell, “Fuzzy identification and control of a liquid level rig,” Fuzzy Sets Syst., vol. 26, pp. 255–273, 1988.
28. —, “Fuzzy adaptive control of a first-order process,” Fuzzy Sets Syst., vol. 31, pp. 47–65, 1989.
29. I. Graham and P. L. Jones, Expert Systems Knowledge, Uncertainty and Decision. New York: Chaman and Hall, 1988.
30. M. M. Gupta and Y. Tsukamoto, “Fuzzy logic controllers— A perspective,” in Proc. Joint Automatic Control Conf., San Francisco, Aug. 1980, pp. FA10-C.
31. M. M. Gupta, G. M. Trojan, and J. B. Kiszka, “Controllability of fuzzy control systems,” IEEE Trans. Syst. Man Cybern., vol. SMC-16, no 4, pp. 576–582, 1986.
32. K. Hirota, Y. Arai, and S. Hachisu, “Moving mark recognition and moving object manipulation in fuzzy controlled robot,” Cont. Theory Adv. Technol., vol. 2, no. 3, pp. 399–418, 1986.
33. K. Hirota and W. Pedrycz, “Analysis and synthesis of fuzzy systems by the use of fuzzy sets,” Fuzzy Sets Syst., vol. 10, no 1, pp. 1–14, 1983.
34. C. Isik, “Identification and fuzzy rule-based control of a mobile robot motion,” in Proc. IEEE Int. Symposium Intelligent Control, Philadelphia, PA, 1987.
35. O. Itoh, K. Gotoh, T. Nakayama, and S. Takamizawa, “Application of fuzzy control to activated sludge process,” in Proc. 2nd IFSA Congress, Tokyo, Japan, July, 1987, pp. 282–285.
36. A. Jones, A Kaufmann, and H. J. Zimmermann, Fuzzy Sets Theory and Applications. Boston: D. Reidel Publishing Company, 1986.
37. J. Kacprzyk and S. A. Orlovski, Optimization Models using Fuzzy Sets and Possibility Theory. Boston: D. Reidel Publishing Company, 1987.
38. J. Kacprzyk and M. Fedrizzi, Combining Fuzzy Imprecision with Probabilistic Uncertainty in Decision Making. New York: Springer-Verlag, 1988.
39. A. Kandel, Fuzzy Techniques in Pattern Recognition. New York: Wiley-Interscience, 1982.
40. Y. Kasai and Y. Morimoto, “Electronically controlled continuously variable transmission,” in Proc. Int. Congress on Transportation Electronics, Dearborn, Ml, 1988.
41. A. Kaufmann, Introduction to Theory of Fuzzy Subsets. New York: Academic, 1975.
42. A. Kaufmann and M. M. Gupta, Introduction to Fuzzy Arithmetic. New York: Van Nostrand, 1985.
43. —____, Fuzzy Mathematical Models in Engineering and Management Science. Amsterdam: North-Holland, 1988.
44. M. Kelemen, Fuzziness and structural stability,” Kybemetes, vol. 10, pp. 67–69, 1981.
45. W. J. M. Kickert, “Towards an analysis of linguistic modeling,” Fuzzy Sets Syst., vol. 2, pp. 293–307, 1979.
46. —, “Further analysis and application of fuzzy logic control,” Internal Rep. F/WK2/75, Queen Mary College, London, 1975.
47. W. J. M. Kickert and H. R. Van Nauta Lemke, “Application of a fuzzy controller in a warm water plant,” Automat., vol. 12, no. 4, pp. 301–308, 1976.
48. W. J. M. Kickert and E. H. Mamdani, “Analysis of a fuzzy logic controller,” Fuzzy Sets Syst., vol. 1, no. 1, pp. 29–44, 1978.
49. P. J. King and E. H. Mamdani, “The application of fuzzy control systems to industrial processes,” in IFAC World Congress, MIT, Boston, 1975.
50. —, “The application of fuzzy control systems to industrial processes,” Automat., vol. 13, no. 3, pp. 235–242, 1977.
51. M. Kinoshita, T. Fukuzaki, T. Satoh, and M. Miyake, “An automatic operation method for control rods in BWR plants,” in Proc. Specialists’ Meeting on In-Core Instrumentation and Reactor Core Assessment, Cadarache, France, 1988.
52. J. B. Kiszka, M. E. Kochanska, and D. S. Sliwinska, “The influence of some parameters on the accuracy of fuzzy model,” in Industrial Applications of Fuzzy Control. M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 187–230.
53. —, “The influence of some fuzzy implication operators on the accuracy of a fuzzy model—Part I,” Fuzzy Sets Syst., vol. 15, pp. 111–128, 1985.
54. —, “The influence of some fuzzy implication operators on the accuracy of a fuzzy model—Part II,” Fuzzy Sets Syst., vol. 15, pp. 223–240, 1985.
55. J. B. Kiszka, M. M. Gupta, and P. N. Nikiforuk, “Energetistic stability of fuzzy dynamic systems,” IEEE Trans. Syst. Man Cybern., vol. SMC-15, no. 5, pp. 783–792, 1985.
56. G. J. Klir and T. A. Folger, Fuzzy Sets, Uncertainty, and Information. Englewood Cliffs, NJ: Prentice Hall, 1988.
57. S. V. Komolov, S. P. Makeev, and I. F. Shaknov, “Optimal control of a finite automation with fuzzy constraints and a fuzzy target,” Cybern., vol. 16, no. 6, pp. 805–810, 1979.
58. L. I. Larkin, “A fuzzy logic controller for aircraft flight control,” in Industrial Applications of Fuzzy Control, M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 87–104.
59. P. M. Larsen, “Industrial applications of fuzzy logic control,” Int. J. Man Mach. Studies, vol. 12, no. 1, pp. 3–10, 1980.
60. E. Lembessis, “Dynamical learning behavior of a rule-based self-organising controller,” Ph.D. thesis, Queen Mary College, Univ. of London, 1984.
61. Y. F. Li and C. C. Lau, “Development of fuzzy algorithms for servo systems,” IEEE Contr. Syst. Mag., vol. 9, no. 3, pp. 65–72, 1989.
62. J. Maiers and Y. S. Sherif, “Applications of fuzzy set theory,” IEEE Trans. Syst. Man Cybern., vol. SMC-15, no. 1, pp. 175–189, 1985.
63. E. H. Mamdani, “Applications of fuzzy algorithms for simple dynamic plant,” Proc. IEE, vol. 121, no. 12, pp. 1585–1588, 1974.
64. E. H. Mamdani and S. Assilian, “An experiment in linguistic synthesis with a fuzzy logic controller,” Int. J. Man Mach. Studies, vol. 7, no 1, pp. 1–13, 1975.
65. E. H. Mamdani, “Advances in the linguistic synthesis of fuzzy controllers,” Int. J. Man Mach. Studies, vol. 8, no. 6, pp. 669–678, 1976.
66. —, “Application of fuzzy logic to approximate reasoning using linguistic synthesis,” IEEE Trans. Computer, vol. C-26, no. 12, pp. 1182–1191, 1977.
67. —, “Applications of fuzzy set theory to control systems: a survey,” in Fuzzy Automata and Decision Processes, M. M. Gupta, G. N. Sardis, and B. R. Gaines, Eds. Amsterdam: North-Holland, 1977, pp. 77–88.
68. E. H. Mamdani and B. R. Gaines, Fuzzy Reasoning and its Applications. London: Academic, 1981.
69. K. Matsushima and H. Sugiyama, “Human operator's fuzzy model in man-machine system with a nonlinear control object,” in First Int. Conf. on Fuzzy Information Processing, 1984.
70. M. Mizumoto, “Note on the arithmetic rule by Zadeh for fuzzy conditional inference,” Cybern. Syst., vol. 12, pp. 247–306, 1981.
71. M. Mizumoto and H. Zimmermann, “Comparison of fuzzy reasoning methods,” Fuzzy Sets and Systems, vol. 8, pp. 253–283, 1982.
72. M. Mizumoto, “Comparison of various fuzzy reasoning methods,” in Proc. 2nd IFSA Congress, Tokyo, Japan, July 1987, pp. 2–7.
73. —, “Fuzzy controls under various approximate reasoning methods,” in Proc. 2nd IFSA Congress, Tokyo, Japan, July, 1987, pp. 143–146.
74. S. Murakami, “Application of fuzzy controller to automobile speed control system,” in Proc. of the IFAC Symp. on Fuzzy Information, Knowledge Representation and Decision Analysis, Marseille, France, 1983, pp. 43–48.
75. S. Murakami and M. Maeda, “Application of fuzzy controller to automobile speed control system,” in Industrial Applications of Fuzzy Control, M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 105–124.
76. Y. Murayama and T. Terano, “Optimizing control of diesel engine,” in Industrial Applications of Fuzzy Control, M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 63–72.
77. C. V. Negoita, “On the stability of fuzzy systems,” in Proc. IEEE Int. Conf. on Cybernetics and Society, 1978, pp. 936–937.
78. —, Expert Systems and Fuzzy Systems. Menlo Park: Benjamin/Cummings Publishing Company, 1985.
79. A. Di Nola and A. G. S. Ventre, The Mathematics of Fuzzy Systems. Gesamtherstellung: Verlag TUV Rheinland, 1986.
80. J. J. Ostergaad, “Fuzzy logic control of a heat exchange process,” in Fuzzy Automata and Decision Processes, M. M. Gupta, G. N. Saridis, and B. R. Gaines, Eds. Amsterdam: North-Holland, 1977, pp. 285–320.
81. S. K. Pal and D. K. Dutta Majumder, Fuzzy Mathematical Approach to Pattern Recognition. New Delhi: Wiley Eastern Limited, 1986.
82. C. P. Pappis and E. H. Mamdani, “A fuzzy logic controller for a traffic junction,” IEEE Trans. Syst. Man Cybern., vol. SMC-7, no. 10, pp. 707–717, 1977.
83. W. Pedrycz, “An approach to the analysis of fuzzy systems,” Int. J. Control, vol. 34, no. 3, pp. 403–421, 1981.
84. —, “An identification of fuzzy relational systems,” Fuzzy Sets Syst., vol. 13, pp. 153–167, 1984.
85. —, “Applications of fuzzy relational equations for methods of reasoning in presence of fuzzy data,” Fuzzy Sets Syst., vol. 16, pp. 163–175, 1985.
86. H. Prade and C. V. Negoita, Fuzzy Logic in Knowledge Engineering. Gesamtherstellung: Verlag TUV Rheinland, 1986.
87. T. J. Procyk and E. H. Mamdani, “A linguistic self-organizing process controller,” Automat., vol. 15, no. 1, pp. 15–30, 1979.
88. G. P. Rao and D. A. Rutherford, “Approximate reconstruction of mapping functions from linguistic description in problems of fuzzy logic applied to system control,” Cybernet., vol. 12, no. 3, pp. 225–236, 1981.
89. K. S. Ray and D. D. Majumder, “Application of circle criteria for stability analysis of linear SISO and MIMO systems associated with fuzzy logic controller,” IEEE Trans. Syst. Man Cybern., vol. SMC-14, no. 2, pp. 345–349, 1984.
90. D. A. Rutherford and G. C. Bloore, “The implementation of fuzzy algorithms for control,” in Proc. IEEE, vol. 64, no. 4, pp. 572–573, 1976.
91. D. A. Rutherford and G. A. Carter, “A Heuristic adaptive controller for a sinter plant,” in Proc. 2nd IFAC Symp. on Automation in Mining, Mineral and Metal Processing, Hohannes-burg, RSA, Sept. 1976.
92. Y. Sakai, “A fuzzy controller in turning process automation,” in Industrial Applications of Fuzzy Control, M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 139–152.
93. E. Sanchez and L. A. Zadeh, Approximate Reasoning in Intelligent Systems, Decision and Control. New York: Pergamnon, 1988.
94. E. M. Scharf and N. J. Mandic, “The application of a fuzzy controller to the control of a multi-degree-freedom robot arm,” in Industrial Applications of Fuzzy Control, M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 41–62.
95. S. Shao, “Fuzzy self-organizing controller and its application for dynamic processes,” Fuzzy Sets Syst., vol. 26, pp. 151–164, 1988.
96. M. S. Stachowicz and M. E. Kochanska, “Fuzzy modeling of the process,” in Proc. 2nd IFSA Congress, Tokyo, Japan, July 1987, pp. 86–89.
97. M. Sugeno and K. Murakami, “Fuzzy parking control of model car,” in 23rd IEEE Conf. on Decision and Control, Las Vegas, 1984.
98. M. Sugeno and M. Nishida, “Fuzzy control of model car,” Fuzzy Sets Syst., vol. 16, pp. 103–113, 1985.
99. M. Sugeno and K. Murakami, “An experimental study on fuzzy parking control using a model car,” in Industrial Applications of Fuzzy Control, M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 125–138.
100. M. Sugeno, “An introductory survey of fuzzy control,” Inform. Sci., vol. 36, pp. 59–83, 1985.
101. M. Sugeno and G. T. Kang, “Structure identification of fuzzy model,” Fuzzy Sets Syst., vol. 28, no. 1, pp. 15–33, 1988.
102. K. Sugiyama, “Analysis and synthesis of the rule based self-organising controller,” Ph.D thesis, Queen Mary College, Univ. of London, 1986.
103. T. Takagi and M. Sugeno, “Derivation of fuzzy control rules from human operator's control actions,” in Proc. of the IFAC Symp. on Fuzzy Information, Knowledge Representation and Decision Analysis, Marseilles, France, July 1983, pp. 55–60.
104. —, “Fuzzy identification of systems and its applications to modeling and control,” IEEE Trans. Syst. Man Cybern., vol. SMC-15, no. 1, pp. 116–132, 1985.
105. K. L. Tang and R. J. Mulholland, “Comparing fuzzy logic with classical controller designs,” IEEE Trans. Syst. Man Cybern., vol. SMC-17, no. 6, pp. 1085–1087, 1987.
106. R. Tanscheit and E. M. Scharf, “Experiments with the use of a rule-based self-organising controller for robotics applications,” Fuzzy Sets Syst., vol. 26, pp. 195–214, 1988.
107. M. Togai and H. Watanabe, “Expert system on a chip: An engine for real-time approximate reasoning,” IEEE Expert Syst. Mag., vol. 1, pp. 55–62, 1986.
108. M. Togai and S. Chiu, “A fuzzy accelerator and a programming environment for real-time fuzzy control,” in Proc. 2nd IFSA Congress, Tokyo, Japan, July 1987, pp. 147–151.
109. R. M. Tong, “Analysis of fuzzy control algorithms using the relation matrix,” Int. J. Man Mach. Studies, vol. 8, no. 6, pp. 679–686, 1976.
110. —, “A control engineering review of fuzzy systems,” Automa., vol. 13, no. 6, pp. 559–569, 1977.
111. —, “Synthesis of fuzzy models for industrial processes,” Int. Gen. Syst., vol. 4, pp. 143–162, 1978.
112. —, “The evaluation of fuzzy models derived from experimental data,” Fuzzy Sets Syst., vol. 4, pp. 1–12, 1980.
113. R. M. Tong, M. B. Beck, and A. Latten, “Fuzzy control of the activated sludge wastewater treatment process,” Automat., vol. 16, no. 6, pp. 695–701, 1980.
114. R. M. Tong, “A retrospective view of fuzzy control systems,” Fuzzy Sets Syst., vol. 14, pp. 199–210, 1984.
115. —, “An annotated bibliography of fuzzy control,” in Industrial Applications of Fuzzy Control, M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 249–269.
116. E. Trillas and L. Valverde, “On mode and implication in approximate reasoning,” in Approximate Reasoning in Expert Systems, M. M. Gupta, A. Kandel, W. Bandler, and J. B. Kiszka, Eds. Amsterdam: North-Holland, 1985, pp. 157–166.
117. Y. Tsukamoto, “An approach to fuzzy reasoning method,” in Advances in Fuzzy Set Theory and Applications, M. M. Gupta, R. K. Ragade, and R. R. Yager, Eds. Amsterdam: North-Holland, 1979.
118. I. G. Umbers and P. J. King, “An analysis of human-decision making in cement kiln control and the implications for automation,” Int. J. Man Mach. Studies, vol. 12, no. 1, pp. 11–23, 1980.
119. M. Uragami, M. Mizumoto, and K. Tananka, “Fuzzy robot controls,” Cybern., vol. 6, pp. 39–64, 1976.
120. H. Watanabe and W. Dettloff, “Reconfigurable fuzzy logic processor: A full custom digital VLSI,” in Int. Workshop on Fuzzy System Applications, Iizuka, Japan, Aug. 1988, pp. 49–50.
121. D. Willaeys, “Optimal control of fuzzy systems,” in Proc. Int. Congress on Applied Systems Research and Cybernetics, Acapulco, Dec. 1980.
122. —, “Decision making with possibilistic dynamic systems,” in Proc. 20th IEEE Conf. on Decision and Control, San Diego, Dec. 1981.
123. D. Willaeys and N. Malvache, “Use of fuzzy model for process control,” in Proc. IEEE Int. Conf. on Cybernetics and Society, 1978, pp. 942–946.
124. —, “Contribution of the fuzzy sets theory to man-machine system,” in Advances in Fuzzy Set Theory and Applications, M. M. Gupta, R. K. Ragade, and R. R. Yager, Eds. Amsterdam: North-Holland, 1979, pp. 481–500.
125. C. W. Xu and Y. Zailu, “Fuzzy model identification and self-learning for dynamic systems,” IEEE Trans. Syst. Man Cybern., vol. SMC-17, no. 4, pp. 683–689, 1987.
126. R. R. Yager, S. Ovchinnikov, R. M. Tong, and H. T. Nguyen, Fuzzy Sets and Applications: Selected Papers by L. A. Zadeh. New York: Wiley-Interscience, 1987.
127. O. Yagishita, O. Itoh, and M. Sugeno, “Application of fuzzy reasoning to the water purification process,” in Industrial Applications of Fuzzy Control, M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 19–40.
128. T. Yamakawa and T. Miki, “The current mode fuzzy logic integrated circuits fabricated by the standard CMOS process,” IEEE Trans. Computer, vol. C-35, no. 2, pp. 161–167, 1986.
129. T. Yamakawa and K. Sasaki, “Fuzzy memory device,” in Proc. 2nd IFSA Congress, Tokyo, Japan, July 1987, pp. 551–555.
130. T. Yamakawa, “High speed fuzzy controller hardware system,” in Proc. 2nd Fuzzy System Symp., Japan, 1986, pp. 122–130.
131. —, “Fuzzy controller hardware system,” in Proc. 2nd IFSA Congress, Tokyo, Japan, July 1987.
132. —, “A simple fuzzy computer hardware system employing min and max operations—A challenge to 6th generation computer,” in Proc. 2nd IFSA Congress, Tokyo, Japan, July 1987.
133. T. Yamakawa, “Fuzzy microprocessors—Rule chip and defuzzifier chip,” in Int. Workshop on Fuzzy System Applications, Iizuka, Japan, Aug. 1988, pp. 51–52.
134. T. Yamazaki and M. Sugeno, “A microprocessor based fuzzy controller for industrial purposes,” in Industrial Applications of Fuzzy Control, M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 231–240.
135. S. Yasunobu, S. Miyamoto, and H. Ihara, “Fuzzy control for automatic train operation system,” in Proc. 4th IFAC/IFIP/IFORS Int. Congress on Control in Transportation Systems, Baden-Baden, April 1983.
136. S. Yasunobu and S. Miyamoto, “Automatic train operation by predictive fuzzy control,” in Industrial Application of Fuzzy Control, M. Sugeno, Ed. Amsterdam: North-Holland, 1985, pp. 1–18.
137. S. Yasunobu and T. Hasegawa, “Evaluation of an automatic container crane operation system based on predictive fuzzy control,” Control Theory Adv. Technol., vol. 2, no. 3, pp. 419–432, 1986.
138. —, “Predictive fuzzy control and its application for automatic container crane operation system,” in Proc. 2nd IFSA Congress, Tokyo, Japan, July 1987, pp. 349–352.
139. S. Yasunobu, S. Sekino, and T. Hasegawa, “Automatic train operation and automatic crane operation systems based on predictive fuzzy control,” in Proc. 2nd IFSA Congress, Tokyo, Japan, July 1987, pp. 835–838.
140. M. Yonekara, “The application of fuzzy sets theory to the temperature of box annealing furnaces using simulation techniques,” in Proc. 8th IFAC World Congress, Tokyo, 1981.
141. L. A. Zadeh, “Fuzzy sets,” Informat. Control, vol. 8, pp. 338–353, 1965.
142. —, “Fuzzy algorithm,” Informat. Control, vol. 12, pp. 94–102, 1968.
143. —, “Toward a theory of fuzzy systems,” in Aspects of Network and System Theory, R. E. Kalman and N. DeClaris, Ed. New York: Holt, Rinehart and Winston, 1971, pp. 469–490.
144. —, “Similarity relations and fuzzy orderings,” Informat. Sci., vol. 3, pp. 177–200, 1971.
145. —, “A rationale for fuzzy control,” Trans. ASME, J. Dynam. Syst. Measur. Control, vol. 94, pp. 3–4, 1972.
146. —, “Outline of a new approach to the analysis complex systems and decision processes,” IEEE Trans. Syst. Man Cybern., vol. SMC-3, pp. 28–44, 1973.
147. —, “The concept of a linguistic variable and its application to approximate reasoning I, II, III,” Informat. Sci., vol. 8, pp. 199–251, pp. 301–357; vol. 9, pp. 43–80, 1975.
148. H. J. Zimmermann, Fuzzy Set Theory and Its Applications. Boston: Kluwer Academic Publishers, 1985.
149. H. J. Zimmermann, Fuzzy Sets, Decision Making, and Expert Systems. Boston: Kluwer Academic Publishers, 1987.
150. C. C. Lee, “Fuzzy logic in control systems: Fuzzy logic controller —Part I,” IEEE Trans. Syst. Man Cybern., vol. 20, no. 2, pp. 404–418, Mar./Apr. 1990.