Applications of Surface Acoustic and Shallow Bulk Acoustic Wave Devices

Proceedings of the IEEE

Volumn 77, Issue 10, 1989, Pages 1453-1484

  Campbell, Colin K ^a  

^a MCMASTER UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

ACOUSTIC BULK WAVE DEVICES; ACOUSTIC DELAY LINES; ACOUSTIC RESONATORS; ACOUSTIC SURFACE WAVE FILTERS; PIEZOELECTRIC MATERIALS;

ACOUSTOELECTRIC CONVOLVERS; CHIRP FILTERS; CORRELATORS; NYQUIST FILTERS; REAL-TIME FOURIER TRANSFORM PROCESSORS; SURFACE-TRANSVERSE-WAVE RESONATORS;

ACOUSTIC SURFACE WAVE DEVICES;

EID: 0024752584     PISSN: 00189219     EISSN: 15582256     Source Type: Journal    
DOI: 10.1109/5.40664     Document Type: Letter

References (322)

1. Lord Rayleigh, “On waves propagating along the plane surface of an elastic solid,” in Proc. London Math. Soc, vol. 7, pp. 4–11, Nov. 1885.
2. R.M. White and F.W. Voltmer, “Direct piezoelectric coupling to surface elastic waves,” Appl. Phys. Lett., vol. 17, pp. 314–316, 1965.
3. K. Yamanouchi, Y. Cho, and T. Meguro, “SHF-range surface acoustic wave filters with interdigital transducers using electron-beam exposure,” in Proc. 1988 IEEE Ultrason. Symp., 1988.
4. J. Yamada, N. Hosaka, A. Yuhara, and A. Iwama, “Sputtered Al-Ti electrodes for high-power du rable SAW devices,” Proc. 1988 IEEE Ultrason. Symp., 1988.
5. Y. Ebata and H. Satoh, “Current applications and future trends for SAW in Asia,” in Proc. 1988 IEEE Ultrason. Symp., 1988.
6. R.C. Williamson, “Case studies of successful surface-acoustic-wave devices,” in Proc. 1977 IEEE Ultrason. Symp., pp. 460–468, 1977.
7. C.S. Hartmann, “System impact of modern Rayleigh wave technology,” in Rayleigh-Wave Theory and Application, E.A. Ash and E.C.S. Paige, Eds. New York: Springer-Verlag, 1985, pp. 236–253.
8. C. Campbell, Surface Acoustic Wave Devices and Their Signal Processing Applications. Boston: Academic Press Boston, 1989.
9. G.S. Kino, Acoustic Waves: Devices, Imaging and Analog Signal Processing. Englewood Cliffs, NJ: Prentice-Hall Inc., 1987.
10. S. Datta, Surface Acoustic Wave Devices. Englewood Cliffs, N): Prentice-Hall, 1986.
11. E.A. Ash and E.C.S. Paige (eds.), Rayleigh-Wave Theory and Application. New York: Springer-Verlag, 1985.
12. A.A. Gerber and A. Ballato (eds.), Precision Frequency Control, vol. 1 and vol. 2. New York: Academic Press, Inc., 1985.
13. D.P. Morgan, Surface-Wave Devices for Signal Processing. New York: Elsevier, 1985.
14. V.M. Ristic, Principles of Acoustic Devices. New York: John Wiley & Sons, 1983.
15. E. Dieulesaint and D. Royer, Elastic Waves in Solids. New York: John Wiley & Sons, 1980.
16. L.M. Brekhovskikh, Waves in Layered Media, 2nd Ed. New York: Academic Press, 1980.
17. A.A. Oliner (ed.), Acoustic Surface Waves, Topics in Applied Physics, vol. 24, New York: Springer-Verlag, 1978.
18. H. Matthews (ed.), Surface Wave Filters. New York: John Wiley & Sons, 1977.
19. J.H. Collins and L. Masotti (eds.), Computer-Aided Design of Surface Acoustic Wave Devices. New York: Elsevier, 1976.
20. B.A. Auld, Acoustic Fields and Waves in Solids, vols. 1, 2. New York: John Wiley & Sons, 1973.
21. Special Issueon Microwave Acoustic Signal Processing, IEEE Trans. Microwave Theory Tech., vol. MTT-21, April 1973.
22. International Specialist Seminar on “Component Performance and Systems Applications of Surface Acoustic Wave Devices,” IEE (Great Britain) Conference Publication Number 109, Sept. 25–28, 1973.
23. D.P. Morgan (ed.), Key Papers on Surface-acoustic-wave Passive Interdigital Devices, IEE (Great Britain) Reprint series 2. Stevenage: Peter Peregrinus Ltd., 1976.
24. A.J. Slobodnik, Jr., T.L. Szabo, and K.R. Laker, “Miniature surface-acoustic-wave filters,” Proc. IEEE, vol. 67, pp. 129–146, Jan. 1979.
25. J.H. Collins and P.M. Grant, “A review of current and future components for electronic warfare receivers,” IEEE Trans. Sonics Ultrason., vol. SU-26, pp. 117–125, May 1981.
26. M.F. Lewis et al., “Recent developments in SAW devices,” in IEE Proc. (UK), vol. 131, Pt. A, pp. 186–212, June 1984.
27. M.G. Holland and L.T. Claiborne, “Practical surface acoustic wave devices,” in Proc. IEEE, vol. 62, pp. 582–611, May 1974.
28. J.D. Maines and E.G.S. Paige, “Surface-acoustic-wave devices for signal processing applications,” Proc. IEEE, vol. 64, pp. 639–652, May 1976.
29. R.M. Hayes and C.S. Hartmann, “Surface-acoustic-wave devices for communications,” Proc. IEEE, vol. 64, pp. 652–671, May 1976.
30. G.W. Farnell, “Surface wave reflectors and resonators,” Canadian Elec. Eng. J., vol. 1, pp. 3–13, 1976.
31. D.T. Bell, Jr., and R.C.M. Li, “Surface-acoustic-wave resonators,” Proc. IEEE, vol. 64, pp. 711–721, May 1976.
32. W.J. Tanski, “Surface acoustic wave resonators on quartz,” IEEE Trans. Sonics Ultrason., vol. SU-26, pp. 93–104, Mar. 1979.
33. A.J. Slobodnik, Jr., “Surface acoustic waves and SAW materials,” Proc. IEEE, vol. 64, pp. 581–595, May 1976.
34. A.A. Oliner, “Waveguides for acoustic surface waves: A review,” Proc. IEEE, vol. 64, pp. 615–627, May 1976.
35. G.S. Kino, “Acoustoelectric interactions in acoustic-surface-wave devices,” Proc. IEEE, vol. 64, pp. 724–748, May 1976.
36. R.M. White, “Surface elastic waves,” Proc. IEEE, vol. 58, pp. 1238–1276, 1970.
37. R.C. Williamson, “Properties and applications of reflective-array devices,” Proc. IEEE, vol. 64, pp. 702–710, May 1976.
38. C.S. Tsai, “Guided-waveacoustooptic Bragg modulators for wideband integrated optic communications and signal processing,” IEEE Trans. Circuits Syst, vol. CAS-26, pp. 1072–1098, Dec. 1979.
39. R.T. Webster and P.H. Carr, “Rayleigh waves on gallium arsenide,” in Rayleigh-Wave Theory and Application, E.A. Ash and E.C.S. Paige, Eds. New York: Springer-Verlag, pp. 122–130, 1985.
40. J.H. Cafarella, “Programmable transversal filters: Applications and capabilities,” in Proc. 1987 IEEE Ultrason. Symp., vol. 1, pp. 31–42, 1987.
41. M.J. Hoskins and B.J. Hunsinger, “Recent developments in acoustic charge transport devices,” in Proc. 1986 IEEE Ultrason. Symp., vol. 1, pp. 439–450, 1986.
42. M. Lewis, “Surface skimming bulk waves, SSBW,” in Proc. 1977 IEEE Ultrason. Symp., pp. 744–752, 1977.
43. K.H. Yen, K.F. Lau, and R.S. Kagiwada, “Recent advances in shallow bulk acoustic wave devices,” in Proc. 1979 IEEE Ultrason. Symp., pp. 776–785, 1979.
44. R.M. White, “A sensor classification scheme,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 124–126, Mar. 1987.
45. S.A. Reible, “Acoustoelectric convolver technology for spread spectrum communications,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 185–195, May 1981.
46. A.J. Chatterjee, P.K. Das, and L.B. Milstein,” Theuseof SAW convolvers in spread-spectrum and other signalprocessing applications,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 745–759, Sept. 1985.
47. L.B. Milstein and P.K. Das, “Spread spectrum receiver using surface acoustic wave technology,” IEEE Trans. Commun., vol. COM-25, pp. 841–847, Aug. 1977.
48. J.H. Fischer et al., “wideband packet radio technology,” Proc. IEEE, vol. 75, pp. 100–115, Jan. 1987.
49. M.A. Jack, P.M. Grant, and J.H. Collins, “The theory, design, and applications of surface acoustic wave Fourier-transform processors” Proc. IEEE, vol. 68, pp. 229–247, 1980.
50. L.B. Milstein, “Interference rejection techniques in spread spectrum communications,” Proc. IEEE vol. 76, pp. 657–671, June 1988.
51. M. Feldman, J. Henaff, and M.A. Kirov, “SAW and SSBW propagation in gallium-arsenide,” in Proc. 1981 IEEE Ultra-son. Symp., vol. 1, pp. 264–267, 1981.
52. T.W. Grudkowski et al., “Integrated circuit compatible surface acoust ic wave devices on gallium arsenide,” IEEE Trans. Microwave Theory Tech., vol. MTT-29, pp. 1348–1351, Dec. 1981.
53. A.J. Slobodnik,Jr. et al., “Lithium tantalate SAW substrate minimal diffraction cuts,” IEEE Trans. Sonics Ultrason., vol. SU-25, pp. 92–97, Mar. 1978.
54. T. Chiba and Y. Togami, “Optical observation of acoustic waves and electrical characteristics in LiTa03 SAWdevices,” IEEE Trans. Sonics Ultrason., vol. SU-29, pp. 58–63, Jan. 1982.
55. W.S. Ishak, C. Flory, and B.A. Auld, “Acoustic modes in lithium tetraborate,” in Proc. 1987 IEEE Ultrason. Symp., vol. 1, pp. 241–245, 1987.
56. F.S. Hickernell, “Zinc oxide films for acoustoelectric device applications,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 621–629, Sept. 1986.
57. F.S. Hickernell, “The microstructural characteristics of thin-film zinc oxide for SAW transducers,” in Proc. 7984 IEEE Ultrason. Symp., vol. 1, pp. 239–242, 1984.
58. T. Shiosaki et al., “High-coupling and high-velocity SAW using ZnO and AIN films on a glass substrate,” IEEE Trans. Ultrason., Ferroelec. Freq. Contr., vol. UFFC-33, pp. 324–330, May 1986.
59. K. Tsubouchi and N. Mikoshiba, “Zero-temperature coefficient SAW devices on AIN epitaxial films,” lEEETrans. Sonics Ultrason., vol. SU-32, pp. 634–644, Sept. 1985.
60. O. Yamazaki, T. Mitsuyu, and K. Wasa, “ZnO thin-film SAW devices,” IEEE Trans. Sonics Ultrason., vol. SU-27, pp. 369–379, Nov. 1980.
61. L.A. Coldren, “Characteristics of zinc-oxide-on-silicon signal processing and storage devices,” Proc. IEEE, vol. 64, pp. 769–771, May 1976.
62. T.E. Parker and M.B. Shulz, “Sio2 film overlays for temperature-stable surface acoustic wave devices,” Appl. Phys. Lett., vol. 26, pp. 75–77, 1975.
63. K. Yamanouchi and S. Hayama, “SAW properties of Si02/128 y - x LiNbO, structure fabricated by magnetron sputtering technique,” IEEE Trans. Sonics Ultrason., vol. SU-31, pp. 51–57, Jan. 1984.
64. R.S. Narayan et al., “Acoustic wave attenuation in berlinite,” in Proc. 1984 IEEE Ultrason. Symp., vol. 1, pp. 262–267, 1984.
65. D. Bailey et al., “An experimental study of the SAW properties of several berlinite samples,” in Proc. 1981 IEEE Ultra-son. Symp., vol. 1, pp. 341–345, 1981.
66. F. Hauser et al., “A new nonlinear FM coded EMAT for nondestructive testing of materials,” in Proc. 7987 IEEE Ultrason. Symp., vol. 2, pp. 989–991, 1981.
67. V.M. Ristic, “Magnetomechanical coupling coefficient for periodic EMAT's,” IEEE Trans. Sonics Ultrason., vol. SU-29, pp. 229–231, July 1982.
68. K. Kawashima, “Electromagnetic acoustic wave source and measurement and calculation of vertical and horizontal displacements of surface waves,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 514–522, July 1985.
69. J.A. Cooper et al., “Surface acoustic wave interactions with cracks and slots: A noncontacting study using lasers,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-3, pp. 462–470, Sept. 1986.
70. A. Aharoni and K.M. Jassby, “Monitoring surface properties of solids by laser-based SAW time-of-flight measurements,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-33, pp. 250–256, May 1986.
71. D.A. Hutchins, F. Hauser, and T. Goetz, “Surface waves using laser generation and electromagnetic acoustic transducer detection,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-33, pp. 478–484, Sept. 1986.
72. W.S. Gorok, P.J. Vella, and G.I. Stegeman, “Optical probing measurements of surface wave generation and reflection in interdigital transducers in LiNbo3,” lEEETrans. Sonics Ultrason., vol. SU-27, pp. 341–354, Nov. 1980.
73. H. Engan, “Laser probing of SAW convolver waveguide loss,” IEEE Trans. Sonics Ultrason., vol. SU-30, pp. 321–323, Sept. 1983.
74. H. Engan, “A phase sensitive laser probe for pulsed SAW measurements,” IEEE Trans. Sonics Ultrason., vol. SU-29, pp. 281–283, Sept. 1982.
75. R.F. Milsom, “Bulk wave generation by the IDT,” in Computer-Aided Design of Surface Acoustic Wave Devices, J.H. Collins and L. Masotti, Eds. New York: Elsevier, pp. 64–81, 1976.
76. H. Engan, “Excitation of elastic surface waves by spatial harmonics of interdigital transducers,” IEEE Trans./ectron Devices, vol. ED-16, pp. 1014–1017, 1969.
77. H. Engan, “High-frequency operation of surface-acoustic-wave multielectrode transducers,” Electron. Lett., vol. 10, pp. 395–396, 1974.
78. H. Engan, “Surface acoustic wave multielectrode transducers,” IEEE Trans. Sonics Ultrason., vol. SU-22, pp. 395–401, 1974.
79. T.L. Szabo, K.R. Laker, and E. Cohen, “Interdigital transducer models: Their impact on filter synthesis,” IEEE Trans. Sonics Ultrason., vol. SU-26, pp. 321–333, 1979.
80. P.M. Naraine and C.K. Campbell, “Gigahertz SAW filters on YZ-lithium niobate without the use of submicron line widths,” in Proc. 1984 IEEE Ultrason. Symp., vol. 1, pp. 93–96, 1984.
81. W.R. Smith, “Basics of the SAW interdigital transducer,” in Computer-Aided Design of Surface Acoustic Wave Devices, J.H. Collins and L. Masotti, Eds. New York: Elsevier, pp. 25–63, 1976.
82. W.R. Smith and W.F. Pedler, “Fundamental-and harmonic-frequency circuit-model analysis of interdigital transducers with arbitrary metallization ratios and polarity sequences,” IEEE Trans. Microwave Theory Tech., vol. MTT-23, pp. 853–864, 1975.
83. R.F. Mitchell and D.W. Parker, “Synthesis of acoustic-surface-wave filters using double electrodes,” Electron. Lett., vol. 10, p. 512, 1974.
84. I. Streibl et al., “SAW diffraction compensation on yz-lith-ium niobate,” in Proc. 1983 IEEE Ultrason. Symp., pp. 62–65, 1983.
85. R.H. Tancrell and M.G. Holland, “Acoustic surface wave filters,” Proc. IEEE, vol. 59, p. 393, 1971.
86. R.H. Tancrell, “Principles of surface wave filter design,” in Surface Wave Filters, H. Matthews, Ed. New York: John Wiley & Sons, ch. 3, 1977.
87. C.S. Hartmann, D.T. Bell, Jr., and R.C. Rosenfeld, “Impulse response model design of acoustic surface-wave filters,” IEEE Trans. Microwave Theory Tech., vol. MTT-21, pp. 162–175, April 1973.
88. W.R. Smith, Jr., “Studies of microwave acoustic transducers and dispersive delay lines,” Ph.D. Thesis in Applied Physics, Stanford University, pp. 1–147, 1969.
89. W.R. Smith et al., “Analysis of interdigital surface wave transducers by use of an equivalent circuit model,” IEEE Trans. Microwave Theory Tech., vol. MTT-17, pp. 856–864, Nov. 1969.
90. W.R. Smith et al., “Design of surface wave delay lines with interdigital transducers,” IEEE Trans. Microwave Theory Tech., vol. MTT-17, pp. 865–873, Nov. 1969.
91. Y.Y. Hashimoto et al., “Frequency response measurement for SAW devices based on Fourier analysis of impulse response,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 76–77, Jan. 1985.
92. C.M. Panasik and B.J. Hunsinger, “Scattering matrix analysis of surface acoustic wave reflectors and transducers,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 79–91, Mar. 1981.
93. P.S. Cross and R.V. Schmidt, “Coupled surface-acoustic-wave resonators,” BellSyst. Tech. J., vol. 56, pp. 1447–1481, 1977.
94. C.K. Campbell and C.B. Saw, “Analysis and design of low-loss SAW filters using single-phase unidirectional transducers,” IEEE Trans. Ultrason., Eerroelec. Freq. Contr., vol. UFFC-34, pp. 357–367, May 1987.
95. P.M. Smith and C.K. Campbell, “A theoretical and experimental study of low-loss SAW filters with interdigitated interdigital transducers,” IEEE Trans. Ultrason. Eerroelec. Freq. Contr., vol. 36, Jan. 1989.
96. S.M. Ritchie, B.P. Abbott, and D.C. Malocha, “Description and development of a SAW filter CAD system,” IEEE Trans. Microwave Theory Tech., vol. 36, pp. 456–466, 1988.
97. A. Reddy, “Design of SAW bandpass filters using new window functions,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. 35, pp. 50–56, Jan. 1988.
98. D.C. Malocha and C.D. Bishop, “The classical truncated cosine series functions with applications to SAW filters,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 75–85, Jan. 1987.
99. C.S. Hartmann, “Weighting interdigital surface wave transducers by selective withdrawal of electrodes,” in Proc. 7973 IEEE Ultrason. Symp., pp. 423–426, 1973.
100. M. Yamaguchi, K.Y. Hashimoto, and H. Kogo, “A simple method of reducing sidelobes for electrode-withdrawal SAW filters,” IEEE Trans. Sonics Ultrason., vol. SU-26, pp. 334–339, Sept. 1979.
101. K.R. Laker et al., “Computer-aided design of withdrawal-weighted SAW bandpass filters,” IEEE Trans. Circuits Syst., vol. CAS-25, pp. 241–251, 1978.
102. A.J. Slobodnik, Jr., et al., “Low sidelobe SAW filters using overlap and withdrawal weighted transducers,” in Proc. 1977 IEEE Ultrason. Symp., pp. 757–762, 1977.
103. F.G. Marshall, C.O. Newton, and E.G.S. Paige, “Theory and design of the surface acoustic wave multistrip coupler,” IEEE Trans. Microwave Theory Tech., vol. MTT-21, pp. 206–215, Apr. 1973.
104. F.G. Marshall, “Surface acoustic wave multistrip components and their applications,” IEEE Trans. Microwave Theory Tech., vol. MTT-21, pp. 216–225, Apr. 1973.
105. P.M. Smith and C.K. Campbell, “The design of SAW linear phase filters using the Remez exchange algorithm,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-33, pp. 318–323, May 1986.
106. R.F. Milsom, M. Redwood, and N.H.C. Reilly, “The interdigital transducer,” in Surface Wave Filters, H. Matthews, Ed. New York: John Wiley & Sons, ch. 2, 1977.
107. K.C. Wagner and G. Visitini, “Spurious bulk waves in SAW filters with apodized transducers,” in Proc. 1988 IEEE Ultra-son. Symp., 1988.
108. R.S. Wagers and R.W. Cohn, “Residual bulk mode levels in (YX1)128 LiNb03,” IEEE Trans. Sonics Ultrason., vol. SU-31, pp. 168–174, May 1984.
109. C. Flory and M. Tan, “Diffraction minimization in SAW devices using wide aperture compensation,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. 35, pp. 498–502, July 1988.
110. E.B. Savage and G.L. Matthei, “A study of some methods for compensation for diffraction in SAW IDT filters,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 439–448, Nov. 1981.
111. W.R. Mader, C. Ruppel, and E. Ehrmann-Falkenau, “Universal method for compensation of SAW diffraction and other second-order effects,” in Proc. 1982 IEEE Ultrason. Symp., vol. 1, pp. 23–28, 1982.
112. T. Kodama, “broadband compensation for diffraction in surface acoustic wave filters,” IEEE Trans. Sonics Ultrason., vol. SU-30, pp. 127–136, May 1983.
113. M. Tan and C. Flory, “Fast computation of SAW diffraction by asymptotic techniques,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 93–104, Jan. 1987.
114. C. Flory and M. Tan, “Compensation of diffraction effects in SAW filters using the uniform asymptotic expansion,” IEEE Trans. Ultrason., Ferroelec. Freq. Contr., vol. UFFC-34, pp. 105–113, January 1987.
115. B.S. Panwar, A.B. Bhattacharya, and E. Dieulesaint, “Transmissionlineapproach for computation of static capacitance of interdigital transducers in multilayered media,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-33, pp. 416–420, July 1986.
116. F. Palma and P.K. Das, “Acoustoelectric interaction in layered semiconductor,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 376–382, May 1987.
117. G.W. Farnell, “Types and properties of surface waves,” in Acoustic Surface Waves, Topics in Applied Physics, vol. 24, A.A. Oliner, Ed. New York: Springer-Verlag, ch. 2, 1978.
118. E. Qian et al, “A modified ZnO film model for calculating elastic and piezoelectric properties,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 630–633, Sept. 1985.
119. W.J. Ghijsen and P.M. van den Berg, “A rigorous computational technique for the acoustoelectric field problem in SAW devices,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-33, pp. 375–384, July 1986.
120. C.K. Campbell, Y. Ye, and J.J. Sferrazza Papa, “wideband linear phase SAW filter design using slanted transducer fingers,” IEEE Trans. Sonics Ultrason., vol. SU-29, pp. 224–228, July 1982.
121. N.J. Slater and C.K. Campbell, “Improved modeling of wideband linear phase SAW filters using transducers with curved fingers,” IEEE Trans. Sonics Ultrason., vol. SU-31, pp. 46–50, Jan. 1984.
122. P.M. Naraine and C.K. Campbell, “Wide band linear phase SAW filters using apodized slanted fingers,” in Proc. 1983 IEEE Ultrason. Symp., vol. 1, pp. 113–116, 1983.
123. E.A. Ash, “Surface wave grating reflectors and resonators,” in Proc. 1970 IEEE G-MTT International Microwave Symp., pp. 385–386, 1970.
124. C.S. Hartmann and R.C. Rosenfeld, U.S. Patent 3 886 504, May 1975.
125. R.C. Bray, “Applications of SAW resonators in high-performance instrumentation,” IEEE Trans. Ultrason., Ferroelec. Freq. Contr., vol. 35, pp. 331–341, May 1988.
126. T.E. Parker and G.K. Montress, “Precision surface-acoustic-wave (SAW) oscillators,” IEEE Trans. Ultrason., Ferroelec. Freq. Contr., vol. 35, pp. 342–364, May 1988.
127. T.E. Parker, “Precision surface acoustic wave (SAW) oscillators,” in Proc. 7982 IEEE Ultrason. Symp., vol. 1, pp. 268–274, 1982.
128. L.L. Pendergrass and L.G. Studebaker, “SAW resonator design and fabrication for 2.0, 2.6 and 3.3 GHz,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., pp. 372–379, May 1988.
129. J.J. Gagnepain, “Rayleigh wave resonators and oscillators,” in Rayleigh-Wave Theory and Application, E.A. Ash and E.G.S. Paige, Eds. New York: Springer-Verlag, 1985, pp. 151–172.
130. M.N. Islam, H.A. Haus, and J. Melngailis, “Bulk radiation by surface acoustic wave propagating under a grating,” IEEE Trans. Sonics Ultrason., vol. SU-31, pp. 123–135, Mar. 1984.
131. W.S. Tanski and H. van de Vaart, “The design of SAW resonators on quartz with emphasis on two-ports,” in Proc. 1976 IEEE Ultrason., Symp., pp. 260–265, 1976.
132. P.S. Cross and S.S. Elliott, “Surface-acoustic-wave resonators,” Hewlett-Packard)., vol. 32, Dec. 1981.
133. H.A. Haus and P.V. Wright, “The analyses of grating structures by cou pi ing-of-modes theory,” in Proc. 1980IEEE Ultra-son. Symp., vol. 1, pp. 277–281, 1980.
134. P.V. Wright, “A coupling-of-modes analysis of SAW grating structures,” Ph.D. Thesis in Electrical Engineering, Massachusetts Institute of Technology, Apr. 1981.
135. C.S. Hartmann et al., “An analysis of SAW interdigital transducers with internal reflections and the application to the design of single-phase unidirectional transducers,” in Proc. 1982 IEEE Ultrason. Symp., vol. 1, pp. 40–45, 1982.
136. P.V. Wright, “The natural single-phase unidirectional transducer: A new low-loss SAW transducer,” in Proc. 1985 IEEE Ultrason. Symp., vol. 1, pp. 58–63, 1985.
137. W.H. Haydl, B. Dischler, and P. Hiesenger, “Multimode SAW resonators-A method to study the optimum performance,” in Proc. 1976 IEEE Ultranson. Symp., pp. 287–296, 1976.
138. D.P. Chen and H.A. Haus, “Analysis of metal-strip SAW gratings and transducers,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 395–408, May 1985.
139. C.K. Campbell, “narrowband filter design using a staggered multimode SAW resonator,” IEEE Trans. Sonics Ultra-son., vol. SU-32, pp. 65–70, Jan. 1985.
140. J.N. Sferrazza Papa, C.K. Campbell, and T. Chu, “Design of a UHF SAW resonator using harmonic-mode excitation,” in Proc. 1983 IEEE Ultrason. Symp., pp. 277–279, 1983.
141. L. A Coldren and R.L. Rosenberg, “Surface-acoustic-wave resonator filters,” Proc. IEEE, vol. 67, pp. 147–158, Jan. 1979.
142. P.S. Cross et al., “Very low loss SAW resonators using parallel coupled cavities,” in Proc. 1982 IEEE Ultrason. Symp., vol. 1, pp. 284–289, 1982.
143. W.J. Tanski, “Multipole SAW resonator filters: Elements of design and fabrication,” in Proc. 1981 IEEE Ultrason. Symp., vol. 1, pp. 100–104, 1981.
144. T.F. O'Shea and R. Rosenfeld, “SAW resonator filters with optimum transducer rejection,” in Proc. 1981 IEEE Ultrason. Symp., vol. 1, pp. 105–110, 1981.
145. R.L. Rosenberg and L.A. Coldren, “Scattering matrix approach to SAW resonators,” in Proc. 1976 IEEE Ultrason. Symp., pp. 266–271, 1976.
146. L.A. Coldren, “Characteristics of surface acoustic wave resonators obtained from cavity analysis,” IEEE Trans. Sonics Ultrason., vol. SU-24, pp. 212–217, May 1977.
147. H.A. Haus, “Modes in SAW grating resonators,”/. Appl. Phys., vol. 48, pp. 4955–4961, Dec. 1977.
148. P.S. Cross, “Surface acoustic wave resonator filters using tapered gratings,” IEEE Trans. Sonics Ultrason., vol. SU-25, pp. 313–319, Sept. 1978.
149. P.J. Edmonson, C.K. Campbell, and P.M. Smith, “Narrowband SAW filters using stepped-resonators with tapered gratings,” in Proc. 1984 IEEE Ultrason. Symp., pp. 235–238, 1984.
150. S.S. Schwartz et al., “SAW resonators on silicon with ZnO limited to IDT regions,” in Proc. 1983 IEEE Ultrason. Symp., pp. 280–282, 1983.
151. Y. Ebata, “Suppression of bulk-scattering loss in SAW resonator with quasi-constant acoustic reflection periodicity,” in Proc. 1988 IEEE Ultrason. Symp., 1988.
152. C.S. Hartmann, J.C. Andle, and M.B. King, “SAW notch filters,” in Proc. 1987 IEEE Ultrason. Symp., vol. 1, pp. 131–138, 1987.
153. R.C. Rosenfeld, R.B. Brown, and C.S. Hartmann, “Unidirectional acoustic surface wave filters with 2 dB insertion loss,” in Proc. 1974 IEEE Ultrason. Symp., pp. 425–428, 1974.
154. K. Shibayama et al., “GHz band SAW filter design using group-type unidirectional transducer,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 91–95, Mar. 1981.
155. M. Lewis, “SAW filters employing interdigitated interdigital transducers,” in Proc. 1982 IEEE Ultrason. Symp., vol. 1, pp. 104–108, 1982.
156. C.B. Saw and C.K. Campbell, “Improved design of single-phase unidirectional transducers for SAW filters,” in Proc. 1987 IEEE Ultrason. Symp., vol. 1, pp. 169–172, 1987.
157. K. Yamanouchi, Z.H. Chen, and T. Meguro, “New low-loss surface acoustic wave transducers in the UHF range,” IEEE Trans. Ultrason. Eerroelec. Freq. Contr., vol. UFFC-34, pp. 531–539, Sept. 1987.
158. K. Yamanouchi, “GHz-range step-type unidirectional low-loss filters and 5 GHz-range conventional I.D.T. in Proc. 1986 IEEE Ultrason. Symp., pp. 81–84, 1986.
159. K. Yamanouchi and H. Furuyashiki, “Low-loss SAW filter using internal reflection types of new single-phase unidirectional transducers,” in Proc. 1984 IEEE Ultrason. Symp., vol. 1, pp. 68–71, 1984.
160. M. Takeuchi and K. Yamanouchi, “New types of SAW reflectors and resonators consisting of reflecting elements with positive and negative reflection coefficients,” IEEE Trans. Ultrason. Eerroelec. Freq. Contr., vol. UFFC-33, pp. 369–374, July 1986.
161. M.F. Lewis, “Low loss SAW devices employing single state fabrication,” in Proc. 1983 IEEE Ultrason. Symp., vol. 1, pp. 104–108, 1983.
162. C.K. Campbell and C.B. Saw, “Low-loss SAW filters with 70 dB sidelobes using cascaded and weighted single-phase unidirectional transducers,” Electron. Lett., vol. 24, pp. 904–905, 7 July 1988.
163. S. Matsuura, K. Hazamu, and T. Murata, “TV tuning systems with a SAW comb filter,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 156–161, May 1981.
164. M.F. Lewis, “Practical frequency source for use in agile radar,” Electron. Lett., vol. 21, pp. 1017–1018, Oct. 1986.
165. C.B. Saw et al., “Multifrequency pulsed injection-locked oscillator using a novel low-loss SAW comb filter,” in Proc. 1986 IEEE Ultrason. Symp., pp. 273–276, 1986.
166. C.B. Saw, “Single-phase unidirectional transducers for low-loss surface acoustic wave devices,” Ph.D. Thesis in Electrical Engineering, McMaster University, Hamilton, Ontario, Canada, July 1988.
167. A.J. Slobodnik, Jr., et al., “A SAW multiplexer using flat exponential filters,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 50–53, Jan. 1981.
168. L.P. Solie et al., “A SAW filter bank using hyperbolically tapered transducers,” in Proc. 1988 IEEE Ultrason. Symp., 1988.
169. L.P. Solie and M.D. Wohlers, “Use of a SAW multiplexer in FMCW radar system,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 141–145, May 1981.
170. R.C. Williamson, “Reflection grating filters,” in Surface Wave Filters, H. Matthews, Ed. New York: Wiley, ch. 9,. 1977.
171. R.C. Williamson and H.I. Smith, “The use of surface-elastic-wave reflection gratings in large time-bandwidth pulse-compression filters,” IEEE Trans. Microwave Theory Tech., vol. MTT-21, pp. 195–205, Apr. 1973.
172. L.P. Solie, “The development of high performance RDA devices,” in Proc. 1979 IEEE Ultrason. Symp., pp. 682–686, 1979.
173. B. Lewis and R.C. Arnold, “Electrode reflectors, directionality, and passband ripple in wideband SAW chirp filters,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 409–422, May 1985.
174. H.M. Gerard et al., “The design and applications of highly dispersive acoustic surface-wave filters,” IEEE Trans. Microwave Theory Tech., vol. MTT-21, pp. 176–186, Apr. 1973.
175. H. Gautier and C. Maerfeld, “Current applications and trends of SAW components in France,” in Proc. 1988 IEEE Ultrason. Symp., 1988.
176. S. Jen and C.F. Shaffer, “Phase compensation of L-band slanted transducer dispersive filters,” in Proc. 7986 IEEE Ultrason. Symp., vol. 1, pp. 51–57, 1986.
177. J. Burnsweig, U.S. Patent No. PD71403, 1972.
178. V.S. Dolat and R.C. Williamson, “A continuously variable delay-line system,” in Proc. 1976 IEEE Ultrason. Symp., pp. 419–423, 1976.
179. H.R. Stocker et al., “Octave bandwidth high performance SAW delay lines,” in Proc. 1980 IEEE Ultrason. Symp., vol. 1, pp. 386–390, 1980.
180. P. Dufilie, “SAW delay line with greater than 100% fractional bandwidth,” in Proc. 1984 IEEE Ultrason. Symp., pp. 26–29, 1984.
181. J.H. Cafarella, “Application of SAW convolvers to spread spectrum communications,” in Proc. 1984 IEEE Ultrason. Symp., vol. 1, pp. 121–126, 1984.
182. D.T. Bell, Jr. and L.T. Claiborne, “Phase code generators and correlators,” in Surface Wave Filters, H. Matthews, Ed. New York: John Wiley & Sons, ch. 7, 1977.
183. D.K. Barton, Modern Radar Systems Analysis. Norwood, MA: Artech House, 1988.
184. A.W. Rihaczek and R.M. Golden, “Range sidelobe suppression for Barker codes,” IEEE Trans. Aerosp. Electron. Syst, vol. AES-7, pp. 1087–1092, Nov. 1971.
185. A. Biran, “Low-sidelobe SAW Barker 13 correlator,” in Proc. 1985 IEEE Ultrason. Symp., vol. 1, pp. 149–152, 1985.
186. J.W. Taylor, Jr. and H.J. Blinchikoff, “Quadriphase code- A radar pulse compression signal with unique characteristics,” IEEE Trans. Aerosp. Electron. Syst., vol. 24, pp. 156–170, Mar. 1988.
187. C.R. Vale, “SAW quadraphase code generator,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 132–136, May 1981.
188. P.J. Edmonson, C.K. Campbell, and S.F. Yuen, “A study of SAW pulse compression using 5x5 Barker codes with quadraphase IDT geometries,” in Proc. 1988 IEEE Ultrason. Symp., 1988.
189. W.R. Smith, “SAW filters for CPSM spread spectrum waveforms,” in Proc. 1980 IEEE National Telecommunications Conf., vol. 1, pp. 22.1.1–22.1.6, 1980.
190. J.H. Goll and D.C. Malocha, “An application of SAW convolvers to high bandwidth spread spectrum communications, IEEE Trans. Sonics Ultrason., vol. SU-28, p. 195–205, May 1981.
191. C.M. Panasik, “250 MHz Programmable transversal filter,” in Proc. 1981 IEEE Ultrason. Symp., vol. 1, pp. 48–52, 1981.
192. D.E. Oates, D.L. Smythe, and J.B. Green, “SAW/FET programmable transversal filter with 100 MHz bandwidth and enhanced programmability” in Proc. 1985 IEEE Ultrason. Symp., vol. 1, pp. 125–129, 1985.
193. J.B. Green et al., “Adaptive and matched filtering with a SAW/FET programmable transversal filter,” in Proc. 1986 IEEE Ultrason. Symp., vol. 1, pp. 137–141, 1986.
194. S.W. Merritt, G.K. Montress, andT.W. Grudkowski, “GaAs SAW MESFET programmable asynchronous correlator with complex tap weighting,” in Proc. 1983 IEEE Ultrason. Symp., vol. 1, pp. 181–184, 1983.
195. I. Yao and J.H. Cafarella, “Applications of SAW convolvers to spread-spectrum communications and wideband radar,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 760–770, Sept. 1985.
196. ]. H. Fischer eta/., “Wideband packet radio for multipath environments,” IEEE Trans. Commun., vol. 36, pp. 564–576, May 1988.
197. M. Kowatsch, J.T. Lafferl, and A. Ersoy, “An Application of SAW convolvers to spread-spectrum transmission of packet voice,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 771–777, Sept. 1985.
198. K. Kowatsch, “Design of a convolver-based packet voice spread spectrum system,” in Proc. 1984 IEEE Ultrason. Symp., vol. 1, pp. 127–131, 1984.
199. C.F. Quate and R.B. Thompson, “Convolution and correlation in real time with nonlinear acoustics,”.J App/.Phys., vol. 16, pp. 494–496, 1970.
200. A.J. Slobodnik, Jr., “Materials and their influence on performance,” in Acoustic Surface Waves, A.A. Oliner, Ed. New York: Springer-Verlag, ch. 6, 1978.
201. P. Def ranould and C. Maerfeld, “A SAW planar piezoelectric convolver,” Proc. IEEE, vol. 64, pp. 748–753, May 1976.
202. H. Engan, K. Ingebrigtsen, and A. Rjnnekleiv, “On the design of high performance planar surface acoustic wave convolvers,” IEEE Trans. Sonics Ultrason., vol. SU-31, pp. 175–184, May 1984.
203. H.P. Grassl and H. Engan, “Small-aperture focusing chirp transducers vs. diffraction compensated beam compressors in elastic SAW convolvers,” IEEE Trans. Sonics Ultra-son., vol. SU-32, pp. 675–684, Sept. 1985.
204. R.D. Colvin and E.J. Charlson, “Multimoding in SAW convolver waveguides,” IEEE Trans. Sonics Ultrason., vol. SU-27, pp. 385–388, Nov. 1980.
205. E.L. Adler, “Spatial uniformity and broadband matching in multiply tapped SAW convolvers,” IEEE Trans. Sonics Ultra-son., vol. SU-32, pp. 685–689, Sept. 1985.
206. J.B. Green and G.S. Kino, “SAW convolvers using focused interdigital transducers,” IEEE Trans. Sonics Ultrason., vol. SU-30, pp. 43–50, Jan. 1983.
207. H. Gautier and C. Maerfeld, “Wideband elastic convolver,” in Proc. 1980 IEEE Ultrason. Symp., pp. 30–36, 1980.
208. M. Planat et al., “A finite element analysis of the piezoelectric waveguide convolver,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 428–439, May 1985.
209. J.H. Cafarella et al., “Acoustoelectric covolvers for programming matched filtering in spread-spectrum systems,” Proc. IEEE, vol. 64, pp. 756–759, May 1976.
210. H. Gautier and G.S. Kino, “A detailed theory of the acoustic wave semiconductor convolver,” IEEE Trans. Sonics Ultra-son., vol. SU-24, pp. 23–33, Jan. 1977.
211. J.H. Goll and D.C. Malocha, “An application of SAW convolvers to high bandwith spread spectrum communications,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 195–205, May 1981.
212. L.B. Milstein, J. Gevargiz, and P.K. Das, “Rapid acquisition for direct sequence spread-spectrum communications using parallel SAW convolvers,” IEEE Trans. Commun., vol. COM-33, pp. 593–600, July 1985.
213. S. Minagawa et al., “Efficient ZnO-Sio2Si Sezawa wave convolver,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 670–674, Sept. 1985.
214. R.A. Becker, R.W. Ralston, and P.V. Wright, “wideband monolithic acoustoelectric memory convolvers,” IEEE Trans. Sonics Ultrason., vol. SU-29, pp. 289–298, Nov. 1982.
215. J.H. Cafarella, “Surface state acoustoelectric memory-correlator,” D. Sc. Thesis in Electrical Engineering, Massachusetts Institute of Technology, 1975.
216. K.A. Ingebrigtsen, “The Schottky diode acoustoelectric memory and correlator-A novel programmable signal processor,” Proc. IEEE, vol. 64, pp. 764–771, May 1976.
217. K.A. Ingebrigtsen, A. Rdnnekleiv, and S. Stueflotten, “Memory correlators with multiple input channels,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 697–706, Sept. 1985.
218. M.A. El Nokali, “Theory of the p + n diode SAW storage correlator in the flash mode,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 728–733, Sept. 1985.
219. R.S. Wagers, “Principles of strip-coupled SAW memory correlators,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 726–727, Sept. 1985.
220. S.S. Schwartz, R.L. Gunshor, and R.F. Pierret, “Implanted-isolated SAW storate correlator,” IEEE Trans. Sonics Ultra-son., vol. SU-32, pp. 707–715, Sept. 1985.
221. M.E. Motamedi, M.K. Kilcoyne, and R. Aatourian, “Large-scale monolithic SAW convolver/correlator on silicon,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 663–669, Sept. 1985.
222. J.B. Green and G.S. Kino, “The SAW-FET signal processor,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 734–744, Sept. 1985.
223. M.W. Casseday et al., “wideband signal processing using the two-beam surface acoustic wave acoustooptic time integrating correlator,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 205–212, May 1981.
224. R.A. Becker, S.A. Reible, and R.W. Ralston, “Comparison of acoustoelectric and acoustooptic signal processing devices,” Soc. Photo-Optical Instrumentation Eng. (SPIE), vol. 209, Optical Signal Processing for C3I, 1979.
225. E.G.H. Lean, J.M. White, and C.D.W. Wilkinson, “Thin-film acoustooptic devices,” Proc. IEEE, vol. 64, pp. 779–788, May 1976.
226. P. Le et al., “An integrated optic digital correlator module using both acoustooptic and electrooptic Bragg diffractions in LiNbo3, in Proc. 1987 IEEE Ultrason. Symp., pp. 467–470, 1987.
227. A.P. Goutzoulis and I.J. Abramovitz, “Digital electronics meets its match,” IEEE Spectrum, pp. 21–25, Aug. 1988.
228. H. Gautier and P. Tournois, “Signal processing using surface-acoustic-wave and digital components,” Proc. IEE(Great Britain), vol. 127, Pt. F. No. 2, pp. 92–98, Apr. 1980.
229. C. Atzeni, “Saw signal transform techniques,” in Computer-Aided Design of Surface Acoustic Wave Devices, J.H. Collins and L. Masotti, Eds. New York: Elsevier, pp. 238–265, 1976.
230. M.A. Jack et al., “Real time network analyzers based on SAW chirp transform processors,” in Proc. 1976 IEEE Ultrason. Symp., pp. 376–381, 1976.
231. G.L. Moule, R.A. Bale, and T.I. Browning, “A 1 GHz bandwidth SAW compressive receiver,” in Proc. 1980 IEEE Ultra-son. Symp., vol. 1, pp. 216–219, 1980.
232. D. Arsenault and V.S. Dolat, “Compact multiple-channel SAW sliding-window spectrum analyzer,” in Proc. 1981 IEEE Ultrason. Symp., vol. 1, pp. 220–225, 1981.
233. H. Gautier and P. Tournois, 'Very fast signal processors as a result of the coupling of surface acoustic wave and digital technologies,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 126–131, May 1981.
234. R.D. Colvin, P.H. Carr, and E.J. Charlson, “SAW bilinear mixer,” in Proc. 1979 IEEE Ultrason. Symp., pp. 721–724, 1979.
235. B.P. Bogert, M.J.R. Healy, and J.W. Tukey, “The quefrency alanysis of time series for echoes: Cepstrum, pseudo-auto-covariance, cross-cepstrum and saphe cracking,” in Proc. Symposium on Time Series Analysis, M. Rosenblatt, Ed. New York: Wiley, pp. 209–243, 1963.
236. M.A. Jack, P.M. Grant, and J.H. Collins, “Waveform detection and classification with SAW cepstrum analysis,” IEEE Trans. Aerosp. Electron. Syst, vol. AES-13, pp. 610–618, 1977.
237. C. Lardat, “Improved SAW chirp spectrum analyzer with 80 dB dynamic range,” in Proc. 1978 IEEE Ultrason. Symp., pp. 518–521, 1978.
238. C.S. Tsai, D.Y. Zhang, and P. Le, “acoustooptic Bragg diffraction in a LiNb03 channel-planar composite waveguide with application to optical computing,” Appl. Phys. Lett., vol. 47, pp. 549, 1985.
239. C.J. Lii et al., “Wideband acoustooptic Bragg cells in GaAs waveguide,” in Proc. 1986 IEEE Ultrason. Symp., vol. 1, pp. 429–433, 1986.
240. D. Gregoris and V.M. Ristic, “wideband transducer for acoustooptic Bragg deflector,” Canadian J. Phys., vol. 63, pp. 195–197, 1985.
241. R.D. Colvin, “UHF acoustic oscillators,” Microwave)., vol. 23, pp. 22–33, Nov. 1980.
242. C.K. Campbell, P.J. Edmonson, and P.M. Smith,” Thephase noise characteristics of a driven SAW oscillator in the threshold vicinity for injection locking,” in Proc. 1985 IEEE Ultrason. Symp., vol. 1, pp. 283–286, 1985.
243. C.K. Campbell, “FM demodulation at UHF frequencies using an injection-locked SAW oscillator,” IEEE Trans. Sonics Ultrason., vol. SU-29, pp. 310–316, Nov. 1982.
244. W.R. Shreve et al., “Power dependence of aging in SAW resonators,” in Proc. 1981 IEEE Ultrason. Symp., vol. 1, pp. 94–99, 1981.
245. W.J. Tanski et al., “A radar system application of an 840-MHz SAW resonator stabilized oscillator,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 146–150, May 1981.
246. D.B. Leeson, “A simple model of feedback oscillator noise spectrum,” Proc. IEEE, vol. 54, pp. 329–330, Feb. 1966.
247. R. L Baer, “Phase noise in surface-acoustic-wave filters and resonators,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. 35, pp. 421–425, May 1988.
248. T.E. Parker, “1/f Phase noise in quartz delay lines and resonators,” in Proc. 1979 IEEE Ultrason. Symp., pp. 878–881, 1979.
249. W.J. Tanski, “The influence of a chrome film bonding layer on SAW resonator performance,” in Proc. 1985 IEEE Ultra-son. Symp., vol. 1, pp. 253–257, 1985.
250. R.C. Bray et al., “Annealing behavior and phase noise performance of SAW resonators,” in Proc. 1985 IEEE Ultrason. Symp., pp. 247–252, 1985.
251. K. Hohkawa and S. Yoshikawa, “SAW oscillator construction employing multiple resonators,” IEEE Trans. Sonics Ultrason., vol. SU-26, pp. 348–353, Sept. 1979.
252. W.D. Cowan et al., “A 300-MHz digitally compensated SAW oscillator,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. 35, pp. 380–385, May 1985.
253. S. Urabe, “Voltage controlled monolithic SAW phase shifter and its application to frequency variable oscillator,” IEEE Trans. Sonics Ultrason., vol. SU-29, pp. 255–261, Sept. 1982.
254. N.A. Howard, “GHz thick film hybrid SAW oscillators,” in Proc. 1983 IEEE Ultrason. Symp., vol. 1, pp. 283–286, 1986.
255. S. Neylon, “Hybrid SAW oscillators,” Microwave]., vol. 25, pp. 91–93, Feb. 1982.
256. C.K. Campbell, J.J. Sferrazza Papa, and P.J. Edmonson, “Study of a UHF mobile radio receiver using a voltage-controlled SAW local oscillator,” IEEE Trans. Sonics Ultrason., vol. SU-31, pp. 40–46, Jan. 1984.
257. W.P. Robins, Phase Noise in Signal Sources. London: Peregrinus Press, 1982.
258. R.I. Amorosi and C.K. Campbell, “Studies of a tunable SAW oscillator using a differential SAW delay line with MOSFET control,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 574–582, July 1985.
259. H.A. Mol and P.T.M. van Zeul, “SAW delay line oscillator with extended tuning range,” Electron. Lett., vol. 24, pp. 889–898, July 1988.
260. P. Weissglas and S. Svensson, “Local oscillators for frequency agile systems,” Microwave J., pp. 35–38, Jan. 1977.
261. C.B. Saw et al., “Mode selection in a multimode SAW oscillator using FM chirp mixing signal injection,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-35, May 1988.
262. B.J. Darby and J.M. Hannah, “Programmable frequency-hop synthesizers based on chirp mixing,” lEEETrans. Sonics Ultrason., vol. SU-28, pp. 178–185, May 1981.
263. A.J. Budreau, A.J. Slobodnik, Jr., and P.H. Carr, “Fast frequency hopping achieved with SAW synthesizers,” Microwave]., vol. 25, pp. 71–80, Feb. 1982.
264. J. Henaff and P.C. Brossard, “Implementation of satellite communication systems using surface acoustic waves,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 161–172, May 1981.
265. N.G. Jones, R.A. Moore, and C.J. Huber, “Optimized SAW spectral control filters for digital satellite communication system,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 173–178, May 1981.
266. M. Suthers et al., “SAW Nyquist filters for digital radio,” in Proc. 1987 IEEE Ultrason. Symp., pp. 117–122, 1987.
267. G. Waters, “A digital radio noise and interference test set,” Hewlett-Packard]., vol. 38, pp. 19–26, July 1987.
268. M.J. McKissock, “Constellation measurement: A tool for evaluating digital radio,” Hewlett-Packard]., vol. 38, pp. 13–17, July 1987.
269. R.L. Rosenberg et al., “Optical fiber repeatered transmission systems utilizing SAW filters,” IEEE Trans. Sonics Ultra-son., vol. SU-30, pp. 119–126, May 1983.
270. See for example, K. Feher, Digital Communications-Satellite/Earth Station Engineering. Englewood Cliffs, N): Prentice-Hall, 1983.
271. M. Suthers, et al., “Suppression of spurious SAW signals,” in Proc. 7986 IEEE Ultrason. Symp., vol. 1, pp. 37–42, 1986.
272. A. Vigil, B.P. Abbott, and D.C. Malocha, “A study of the effects of apodized structure geometries on SAW filter parameters,” in Proc. 1987 IEEE Ultrason. Symp., vol. 1, pp. 139–144, 1987.
273. C. Ruppel, E. Ehrmann-Falkenau, and H.R. Stocker, “Compensation algorithm for SAW second order effects in multistrip coupler filters,” in Proc. 1985 IEEE Ultrason. Symp., vol. 1, pp. 7–10, 1985.
274. E. Ehrmann-Falkenau, et al., “SAW-filters for spectral shaping in a 140 mbit/s digital radio system using 16 QAM,” in Proc. 1983 IEEE Ultrason. Symp., pp. 17–22, 1983.
275. M. Hokita et al., “Miniature SAW antenna duplexer for 800-MHz portable telephone used in cellular radio systems,” IEEE Trans. Microwave Theory Tech., vol. 36, pp. 1047–1056, June 1988.
276. S.W. Merritt, G.K. Montress, and T.W. Grudkowski, “GaAs SAW/MESFET programmable asynchronous correlator with complex tap weighting,” in Proc. 1983 IEEE Ultrason. Symp., vol. 1, pp. 181–184, 1983.
277. F. Guediri et al., “Performance of acoustic charge transport programmable tapped delay line,” in Proc. 1987 IEEE Ultra-son. Symp., vol. 1, pp. 11–14, 1987.
278. M.J. Hoskins, H. Morkoc, and B.J. Hunsinger, “Charge transport by surface acoustic waves in GaAs,” Appl. Phys. Lett., vol. 41 (4), Aug. 1982.
279. R.W. Miller et al., “Modeled and measured ACT based convolver performance,” in Proc. 1987 IEEE Ultrason. Symp., vol. 1, pp. 25–29, 1987.
280. S. Gaalema, R.J. Schwartz, and R.L. Gunshor, “Acoustic surface wave interaction chargecoupled devices,” Appl. Phys. Lett., vol. 29 (2), p. 86, 1976.
281. T.L. Augustine, R.J. Schwartz, and R.L. Gunshor, “Modeling of charge transfer by surface acoustic wave in a monolithic metal/ZnO/Si02/Si system,” IEEE Trans. Electron Devices, vol. ED-29, p. 1976, 1982.
282. W.J. Tanski et al., “Heterojunction acoustic charge transport devices on CaAs,” Appl. Phys. Lett., vol. 52 (1), pp. 18–20, 1988.
283. R.L. Miller, J.R. Willhite, and A. Divenere, “Direct optical injection in an ACT channel,” in Proc. 1987 IEEE Ultrason. Symp., vol. 1, pp. 15–19, 1987.
284. W. Wohltjert et al., “Trace chemical vapor detection using SAW delay line oscillators,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 172–178, Mar. 1987.
285. A. Venema et al., “No2 gas-concentration measurement with a SAW-chemosensor,” IEEE Trans. Sonics, Ultrason. Freq. Contr., vol. UFFC-34, pp. 148–155, Mar. 1987.
286. J.F. Vetelino, R.K. Lade, and R.S. Falconer, “Hydrogen sulfide surface acoustic wave gas detector,” IEEE Trans. Ultra-son. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 156–161, Mar. 1987.
287. R.M. White et al., “Plate-mode ultrasonic sensors,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 162–171, Mar. 1987.
288. S.J. Martin et al., “Isothermal measurements and thermal desorption of organic vapors using SAW devices, IEEE Trans. Sonics, Ultrason. Freq. Contr., vol. UFFC-34, pp. 142–147, Mar. 1987.
289. S. Locke and B.K. Sinha, “Acceleration stress compensated surface acoustic wave devices,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 478–484, July 1987.
290. B.K. Sinha and S. Locke, “Acceleration of vibration sensitivity of SAW devices,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 29–38, Jan. 1987.
291. D. Hauden, M. Planat, and J.J. Gagnepain, “Nonlinear properties of surface acoustic waves: Applications to oscillators and sensors,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 342–348, Sept. 1981.
292. R. Inaba and Y. Kasahara, “An electrostatic voltage sensor using surface acoustic waves,” IEEE Trans. Sonics Ultrason., vol. SU-29, pp. 381–385, Nov. 1982.
293. S.M. Hanna, “Magnetic field sensors based on SAW propagation in magnetic films,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 191–194, Mar. 1987.
294. R. Adler and P.J. Desmares, “An economical touch panel using SAW absorption,” IEEE Trans. Ultrason. Ferroelec. Freq. Contr., vol. UFFC-34, pp. 195–201, Mar. 1987.
295. B. Davari and P.K. Das, “Transient behavior of transverse acoustoelectric voltage and nondestructive characterization of semiconductor surfaces,” IEEE Trans. Sonics Ultra-son., vol. SU-32, pp. 778–790, Sept. 1985.
296. L.W. Kessler, “Acoustic microscopy commentary: SLAM and SAM,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 136–138, Mar. 1985.
297. M. Nikoonahad, G. Yue, and E.A. Ash, “Pulse compression acoustic microscopy using SAW filters,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 152–163, Mar. 1985.
298. W.H. Chen, F.C. Fu, and W.L. Lu, “Scanning acoustic microscope utilizing SAW-BAW conversion,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 181–188, Mar. 1985.
299. T. Nomura, S. Shiokawa, and T. Moriizumi, “Measurement and mapping of elastic anisotropy of solids using a leaky SAW excited by an interdigital transducer,” IEEE Trans. Sonics Ultrason., vol. SU-32, pp. 235–239, Mar. 1985.
300. K.H. Yen, K.L. Wang, and R.S. Kagiwada, “Efficient bulk wave excitation on ST quartz,” Electron. Lett., vol. 13, pp. 37–38, Jan. 1977.
301. T.I. Browning and M.F. Lewis, “New family of bulk-acoustic-wave devices employing interdigital transducers,” Electron. Lett., vol. 13, pp. 128–130, Mar. 1977.
302. K.V. Rousseau et al., “High Q, single mode S-band SBAW oscillators,” in Proc. 1982 IEEE Ultrason. Symp., vol. 1, pp. 279–283, 1982.
303. F. Josse, “Temperature dependence of SH-wave on rotated y-cut quartz with Sio2 overlay,” IEEE Trans. Sonics Ultrason., vol. SU-31, pp. 162–168, May 1984.
304. A. Ballato and T.J. Lukaszek, “Shallow bulk acoustic wave progress and prospects,” IEEE Trans. Microwave Theory Tech., vol. MTT-27, pp. 1004–1012, 1979.
305. T.I. Browning et al., “Bandpass filters employing surface skimming bulk waves,” in Proc. 1977 IEEE Ultrason. Symp., pp. 753–756, 1977.
306. B. Auld, J. Gagnepain, and M. Tan, “Horizontal shear surface waves on corrugated surfaces,” Electron. Lett., vol. 12, pp. 650–652, 1976.
307. T.L. Szabo and E. Cohen, “Shear wave frequency-steered beams from electrode arrays,” IEEE Trans. Sonics Ultrason., vol. SU-30, pp. 340–345, Nov. 1983.
308. P.D. Bloch, E.G.S. Paige, and M.W. Wragg, “On the reflection of surface skimming bulk waves,” IEEE Trans. Sonics Ultrason., vol. SU-29, pp. 104–111, Mar. 1982.
309. P.D. Bloch, E.G.S. Paige, and M.W. Wong, “Design considerations for surface skimming bulk wave devices: Reflection, suppression and encapsulation,” IEEE Trans. Sonics Ultrason., vol. SU-31, pp. 77–83, Mar. 1984.
310. K.H. Yen, K.F. Lau, and R.G. Kagiwada, “Shallow bulk acoustic wave filters,” in Proc. 1978 IEEE Ultrason. Symp., pp. 680–683, 1978.
311. E.G.S. Paige and P. Whittle, “Coupling of surface skimming bulk waves with a multistrip coupler,” in Proc. 1979 IEEE Ultrason. Symp., pp. 802–805, 1979.
312. J.Z. Wilcox and K.-H. Yen, “Shear horizontal surface waves on rotated y-cut quartz,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 449–454, Nov. 1981.
313. D.F. Thompson and B.A. Auld, “Surface transverse wave propagation under metal strip gratings,” in Proc. 1986 IEEE Ultrason. Symp., vol. 1, pp. 261–266, 1986.
314. D.L. Lee, “Analysis of energy trapping effects for SH-type waves on rotated y-cut quartz,” IEEE Trans. Sonics Ultrason., vol. SU-28, pp. 330–341, Sept. 1981.
315. A. Renard J. Henaff, and B.A. Auld, “SH surface wave propagation on corrugated surfaces of rotated y-cut quartz and berlinite crystals,” in Proc. 7987 IEEE Ultrason. Symp., vol. 1, pp. 123–127, 1981.
316. E.J. Danicki, “Propagation of transverse surface acoustic waves in rotated y-cut quartz substrates under heavy periodic metal electrodes,” IEEE Trans. Sonics Ultrason., vol. SU-30, pp. 304–312, Sept. 1983.
317. T.L. Bagwell and R.C. Bray, “Novel surface transverse wave resonators with low loss and high Q,” in Proc. 1987 IEEE Ultrason. Symp., vol. 1, pp. 319–324, 1987.
318. A. Ronnekleiv, “High Q resonators based on surface transverse waves,” in Proc. 7986 IEEE Ultrason. Symp., vol. 1, pp. 257–260, 1986.
319. D.L. Harmon, F. Josse, and J.F. Vetelino, “Surface skimming bulk waves in y-rotated quartz-Experimental characterization and filter device implementation,” in Proc. 1979 IEEE Ultrason. Symp., pp. 791–796, 1979.
320. K.F. Lau et al., “Further investigation of shallow bulk acoustic waves generated by using interdigital transducers,” in Proc. 1977 IEEE Ultrason. Symp., pp. 996–1001, 1977.
321. R. Hugli, “GHz SAW and STW bandpass filters without submicron geometries using harmonic group type unidirectional transducers,” in Proc. 1987 IEEE Ultrason. Symp., pp. 183–187, 1987.
322. R.L. Baer and C.A. Flory, “Harmonic operating of STW filters,” in Proc. 1988 IEEE Ultrason. Symp., 1988.