Application of an internal variable constitutive model to predict creep response of an aluminum alloy under multiaxial loading

Journal of Applied Mechanics, Transactions ASME

Volumn 56, Issue 3, 1989, Pages 514-518

  Mahmood, I U ^a   Faruque, M O ^b   Zaman, M M ^a  

^a UNIVERSITY OF OKLAHOMA   (United States)

^b KING FAHD UNIVERSITY OF PETROLEUM AND MINERALS   (Saudi Arabia)

Author keywords

[No Author keywords available]

Indexed keywords

STRAIN; STRESSES--SHEAR;

CREEP RESPONSE MODEL; CREEP STRAIN RATE; EFFECTIVE STRESS TENSOR; INTERNAL VARIABLE CONSTITUTIVE MODEL;

ALUMINUM AND ALLOYS;

EID: 0024734735     PISSN: 00218936     EISSN: 15289036     Source Type: Journal    
DOI: 10.1115/1.3176120     Document Type: Article

References (55)

1. Besseling, J. F., 1953, “A Theory of Elastic Plastic and Creep Deformation of an Initially Isotropic Material Showing Anisotropic Strain Hardening, Creep, Recovery, and Secondary Creep,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 25, pp. 529-536.
2. Bodner, S. R., and Merzer, A., 1978, “Viscoplastic Constitutive Equations for Copper With Strain History and Temperatures Effects,” ASME Journal of Engineering Materials and Technology, Vol. 100, pp. 338-394.
3. Cernocky, E. P., andKrempl, E., 1980, “A Theory of Thermoviscoplasticity Based on Infinitesimal Total Strain,” Int. J. Solids and Structures, Vol. 16, pp. 723-741.
4. Chaboche, J. L., 1977, “Viscoelastic Constitutive Equations for the Description of Cyclic and Anisotropic Behavior of Metals,” Bull. Acad. Polon. Sci., SerSci. Tech., Vol. 25, p. 33.
5. Chaboche, J. L., Dang Van, K., and Cordier, G., 1979, “Modelization of the Strain Memory Effect on the Cyclic Hardening of 316 Stainless Steel,” Trans. 5th Int. Conf. Struc. Mech. Reactpr Tech.,1. A. Jaeger, and B. A. Boley, eds., North-Holland, Amsterdam.
6. Cho, U. W., and Findley, W. N., 1980, “Creep and Creep Recovery of 304 Stainless Steel Under Combined Stress With a Representation by a Viscous-Viscoelastic Model,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 47, pp. 755-761.
7. Cho., U. W., and Findley, W. N., 1981, “Creep and Creep Recovery of 304 Stainless Steel at Low Stresses With Effects of Aging on Creep and Plastic Strains,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 48, pp. 785-790.
8. Cho., U. W., and Findley, W. N., 1982, “Creep and Plastic Strains of 304 Stainless Steel at 593°C Under Step Stress Changes, Considering Aging,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 49, pp. 297-304.
9. Cho., U. W., and Findley, W. N., 1983a, “Creep and Plastic Strains Under Side Steps of Tension and Torsion for 304 Stainless Steel at 593°C,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 50, pp. 580-586.
10. Cho., U. W., and Findley, W. N., 1983b, “Creep and Plastic Strains Under Stress Reversal in Torsion With and Without Simultaneous Tension for 304 Stainless Steel at 593°C,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 50, pp. 587-592.
11. Cho, U. W., and Findley, W. N., 1984, “Creep and Creep Recovery of 2618-T61 Aluminum Under Variable Temperature,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 51, pp. 816-820.
12. Ding, J. L., and Findley, W. N., 1984a, “48 Hour Multiaxial Creep and Creep Recovery of 2618 Aluminum Alloy at 200°C,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 51, pp. 125-132.
13. Ding, J. L., and Findley, W. N., 1984b, “Multiaxial Creep of 2618 Aluminum Under Proportional Loading Steps,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 51, pp. 133-140.
14. Ding, J. L., and Findley, W. N., 1985, “Nonproportional Loading Steps in Multiaxial Creep of 2618 Aluminum,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 52, pp. 621-628.
15. Faruque, M. O., 1985, “On the Description of Cyclic Creep and Rate Dependent Plastic Deformation,” Acta Mechanica, Vol. 55, pp. 123-136.
16. Faruque, M. O., and Zaman, M. M., 1988, “On Modelling Steady State and Transient Creep of Polycrystalline Solids,” Acta Mechanica, Vol. 71, pp. 115-136.
17. Findley, W. N., Cho, U. W., and Ding, J. L., 1979, “Creep of Metals and Plastics Under Combined Stresses, A Review,” J. Engng. Mat. Tech., Vol. 101, pp. 365-368.
18. Findley, W. N., and Lai, J. S., 1978, “Creep and Recovery of 2618 Aluminum Alloy Under Combined Stress With a Representation by a Viscous-Viscoelastic Model,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 45, pp. 507-514.
19. Findley, W. N., and Lai, J. S., 1981, “Creep of 2618 Aluminum Under Sidesteps of Tension, Torsion and Stress Reversal Predicted by a Viscous-Viscoelastic Model,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 48, pp. 47-54.
20. Garaflo, F., 1965, Fundamentals of Creep and Creep-Rupture in Metals, Macmillan, New York.
21. Gilman, J. J., 1966, “Progress in the Microdynamical Theory of Plasticity,” Proc. of the Fifth U. S. Congress of Applied Mech., ASME, New York, pp. 385-403.
22. Gittus, J. H., 1978, “Dislocation Creep Under Cyclic Stressing: Physical Model and Theoretical Equations,” Acta Met., Vol. 26, pp. 305-317.
23. Hart, E. W., 1976, “Constitutive Relations for the Nonelastic Deformation of Metals,” ASME Journal of Engineering Materials and Technology, Vol. 98, pp. 193-202.
24. Henderson, J., 1979, “An Investigation of Multi-Axial Creep Characteristics of Metals,” ASME Journal of Engineering Materials and Technology, Vol. 101, pp. 356-364.
25. Kocks, U. F., 1976, “Laws for Work-Hardening and Low-Temperature Creep,” Trans. ASME Journal of Engineering Materials and Technology, Vol. 98, pp. 76-85.
26. Krans, H., 1980, Creep Analysis, John Wiley and Sons, Inc., New York.
27. Krempl, E., 1974, “Cyclic Creep-An Interpretive Literature Survey,” WRC Bull, No 195, Welding Research Council, p. 63.
28. Krieg, R. D., 1977, “Numerical Integration of Some New Unified Plasticity-Creep Formulations,” Proc. 4th International Conference on Structural Mechanics in Reactor Technology, Comm. of the European Communities, Luxembourg.
29. Krieg, R. D., Swearengen, J. C, and Rhode, R. W., 1978, “A Physically-Based Internal Variable Model for Rate-Dependent Plasticity,” Inelastic Behavior of Pressure Vessel and Piping Components, T. Y. Chang, E. Kremple, eds., pp. 15-28.
30. Kujawski, D., and Mroz, Z., 1980, “A Viscoplastic Material Model and its Application to Cyclic Loading,” Acta Mechanica, Vol. 36, pp. 213-230.
31. Laften, J. H., and Stouffer, D. C, 1978, “An Analysis of High Temperature Metal Creep: Part II-A-Constitutive Formulation and Verification,” ASME Journal of Engineering Materials and Technology, Vol. 100, pp. 363-380.
32. Lagneborg, R., 1971, “A Theoretical Approach to Creep Deformation During Intermittent Load,” ASME J. Basic Enging., Vol. 93, p. 205.
33. Lagneborg, R., 1972, “A Modified Recovery-Creep Model and its Evaluation,” Met. Sci. J., Vol. 6, pp. 127-133.
34. Lagneborg, R., 1981, “Creep: Mechanisms and Theories,” Creep and Fatigue in High Temperatures Alloys, J. Bressers, ed., Applied Science Publishers.
35. Lai, J. S., and Findley, W. N., 1980, “Creep of 2618 Aluminum Under Step Stress Changes Predicted by a Viscous-Viscoelastic Model,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 47, pp. 21-26.
36. Lai, J. S., and Findley, W. N., 1982, “Simultaneous Stress Relaxation in Tension, and in Creep Torsion of 2618 Aluminum at Elevated Temperature,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 49, pp. 19-25.
37. Larsson, B., Storakes, B., 1978, “A State Variable Interpretation of Some Rate-Dependent Inelastic Properties of Steel,” ASME Journal of Engineering Materials and Technology, Vol. 100, pp. 395-401.
38. Leckie, F. A., Ponter, A. R. S., 1974, “On the State Variable Description of Creeping Materials,” Ing. Archiv., Vol. 43, pp. 158-167.
39. Malinin, N. N., and Khadjinsky, G. M., 1972, “Theory of Creep With Anisotropic Hardening,” Int. J. Mech. Sci., Vol. 14, pp. 235-246.
40. Miller, A., 1976, “An Inelastic Constitutive Model for Monotonic, Cyclic and Creep Deformation,” ASME Journal of Engineering Materials and Technology, Vol. 98, pp. 97-113.
41. Mroz, Z, 1981, “On Generalized Kinematic Hardening Rule With Memory of Maximal Prestress,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 5, pp. 241-260.
42. Mroz, Z., and Trampczynski, W. A., 1984, “On the Creep-Hardening Rule for Metals with a Memory of Maximal Prestress,” Int. J. Solids and Structures, Vol. 20, pp. 467-486.
43. Murakami, S., and Ohno, N., 1982, “A Constitutive Equation of Creep Based on the Concept of a Creep-Hardening Surface,” Int. J. Solids and Structures, Vol. 18, pp. 597-609.
44. Odqvist, F. K. G., 1974, Mathematical Theory of Creep and Creep Rupture, Oxford University Press.
45. Ohashi, Y., Ohno, N., and Kawai, M., 1982, “Evaluation of Creep Constitutive Equations for Type 304 Stainless Steel Under Repeated Multiaxial Loading,” ASME Journal of Engineering Materials and Technology, Vol. 104, pp. 159-164.
46. Ohnami, M., Motoie, K., and Yoshida, N., 1969, “Study on the Influence of Strain History on Creep of Polycrystalline Metallic Materials at Elevated Temperature,” Zairyo, Vol. 18, p. 226.
47. Ohno, N., Murakami, S., and Ueno, T., 1985, “A Constitutive Model of Creep Describing Creep Recovery and Material Softening Caused by Stress Reversals,” ASME Journal of Engineering Materials and Technology, Vol. 107, pp. 1-6.
48. Ostrom, P., and Lagneborg, R., 1976, “A Recovery-Thermal Glide Creep Model,” ASME Journal of Engineering Materials and Technology, Vol. 98, pp. 114-124.
49. Paslay, P. R., and Wells, C. H., 1976, “Uniaxial Creep Behavior of Metals Under Cyclic Temperature and Stress or Strain Variation,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 98, pp. 445-449.
50. Ponter, A. R. S., and Leckie, F. A., 1976, “Constitutive Relationships for the Time-Dependent Deformation of Metals,” ASME Journal of Engineering Materials and Technology, Vol. 98, pp. 47-51.
51. Rabotonov, Y. N., 1969, Creep Problems of Structural Members, North-Holland, Amsterdam.
52. Robinson, D. N., Pugh, C. E., and Corum, J. M., 1976, “Constitutive Equations for Describing High-Temperature Inelastic Behavior of Structural Alloys,” IAEA Int. Working Croup on Fast Reactors Specialists-Meeting on High Temperature Structural Design Technology, IAEA.
53. Robinson, D. N., 1978, “A Unified Creep-Plasticity Model for Structural Metals at High Temperature,” ORNL/TM-5969., Oak Ridge National Laboratory, Oak Ridge, Tenn.
54. Swearengen, P. C, Rhode, R. W., and Hicks, D. L., 1976, “Mechanical State Relations for Inelastic Deformation on Iron: The Choice of Variables,” Acta Met., Vol. 24, pp. 969-975.
55. Swearengen, J. C, and Rhode, R. W., 1977, “Application of Mechanical State Relations at Low and High Homologous Temperatures,” Met. Trans., Vol. 8A, pp. 577-582.