Applications of Adaptive Control to Machine Tool Process Control

IEEE Control Systems Magazine

Volumn 9, Issue 4, 1989, Pages 33-37

  Ulsoy, A Galip ^a   Koren, Yoram ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONTROL SYSTEMS, ADAPTIVE; CONTROL SYSTEMS, NUMERICAL; MILLING CUTTERS--CONTROL; PROCESS CONTROL;

ADAPTIVE CONTROL CONSTRAINTS; ADAPTIVE CONTROL OPTIMIZATION; GEOMETRIC ADAPTIVE CONTROL; MACHINE TOOL PROCESS CONTROL; TOOL WEAR ESTIMATION;

MACHINE TOOLS;

EID: 0024682841     PISSN: 02721708     EISSN: None     Source Type: Journal    
DOI: 10.1109/37.24837     Document Type: Article

References (31)

1. A. G. Ulsoy, Y. Koren, and F. Rasmussen, “Principal Developments in the Adaptive Control of Machine Tools,” ASME J. Dynam. Syst., Meas., Contr., vol. 105, no. 2, pp. 107-112, 1983.
2. G. C. Goodwin and K. S. Sin, Adaptive Filtering, Prediction, and Control, Englewood Cliffs, NJ: Prentice-Hall, 1984.
3. Y. Koren, Computer Control of Manufacturing Systems, New York: McGraw-Hill, Chap. 8, 1983.
4. R. Centner, “Final Report on the Development of an Adaptive Control Technique for a Numerically Controlled Milling Machine,” USAF Tech. Documentary Rept. ML-TDR-64-279, Aug. 1964.
5. J. Huber and R. Centner, “Test Results with an Adaptively Controlled Milling Machine,” ASTME Paper MS68-638, 1968.
6. G. Amitay, S. Malkin, and Y. Koren, “Adaptive Control Optimization of Grinding,” ASMEJ. Eng. Ind., vol. 103, no. 1, pp. 102-111, 1981.
7. G. Stute, “Adaptive Control,” Proc. Machine Tool Task Force Conf., Chicago, IL, vol. 4, sec. 7.14, 1980.
8. T. Watanabe and S. Iwai, “A Control System to Improve the Accuracy of Finished Surfaces in Milling,” ASME J. Dynam. Syst., Meas., Contr., vol. 105, no. 3, pp. 192-199, 1983.
9. C. L. Wu, R. K. Haboush, D. R. Lymbur-ner, and G. H. Smith, “Closed-Loop Machining Control for Cylindrical Turning,” Modeling, Sensing and Control of Manufacturing Systems, New York: ASME, pp. 189-204, Nov. 1986.
10. J. Tlusty and G. C. Andrews, “A Critical Review of Sensors for Unmanned Machining,” Annals CIRP, vol. 32, no. 2, pp. 563-572, 1983.
11. L. V. Colwell, J. C. Mazur, and W. R. DeVries, “Analytical Strategies for Automatic Tracking of Tool Wear,” Proc. 6th N. Amer. Manufac. Res. Conf., pp. 274-282, 1978.
12. E. Kannatey-Asibu, Jr. and D. A. Domfeld, “A Study of Tool Wear Using Statistical Analysis of Cutting Acoustic Emission,” Wear, vol. 76, pp. 247-261, 1982.
13. A. G. Ulsoy and W. R. DeVries, Microcomputer Applications in Manufacturing, New York: Wiley, Chap. 6, 1989.
14. R. Isermann, “Process Fault Detection Based on Modeling and Estimation Methods—A Survey,” Automatica, vol. 20, no. 4, pp. 387-404, 1984.
15. T. Watanabe, “Model Based Approach to Adaptive Control Optimization for Milling,” ASME J. Dynam. Syst., Meas., Contr., vol. 108, pp. 56-64, 1986.
16. Y. Koren, “Flank Wear Modeling of Cutting Tools Using Control Theory,” ASME J. Eng. Ind., vol. 100, no. 1, pp. 103-109, 1978.
17. E. Usui, T. Shirakashi, and T. Kitagawa, “Analytical Prediction of Three Dimensional Cutting Process—Part 3: Cutting Temperature and Crater Wear of Carbide Tool,” ASME J. Eng. Ind., vol. 100, pp. 236-243, 1978.
18. K. Danai and A. G. Ulsoy, “A Dynamic State Model for Online Tool Wear Estimation in Turning,” ASME J. Eng. Ind., vol. 109, no. 4, pp. 396-399, 1987.
19. K. Danai and A. G. Ulsoy, “An Adaptive Observer for Online Tool Wear Estimation in Turning, Part I: Theory,” Mec. Syst. Signal Proc., vol. 1, no. 2, pp. 211-225, 1987.
20. K. Danai and A. G. Ulsoy, “An Adaptive Observer for Online Tool Wear Estimation in Turning, Part II: Results,” Mec. Syst. Signal Proc., vol. 1, no. 2, pp. 227-240, 1987.
21. Y. Koren, A. G. Ulsoy, and K. Danai, “Tool Wear and Breakage Detection Using a Process Model,” Annals CIRP, vol. 35, no. 1, pp. 283-288, 1986.
22. G. R. Arulalan, P. A. S. Ralston, and T. L. Ward, “Adaptive Observer for Optimal Control of Lathe Tool Wear,” Proc. Amer. Contr. Conf., vol. 2, pp. 1168-1171, 1988.
23. A. G. Ulsoy, Y. Koren, T. R. Ko, and J. J. Park, “Model-Based Tool Wear Estimation in Metal Cutting.” Proc. NSF Conf. on Production-Research and Technology, pp. 227-230, 1989.
24. O. Masory and Y. Koren, “Adaptive Control System for Turning,” Annals CIRP, vol. 29, no. 1, pp. 281-284, 1980.
25. O. Masory and Y. Koren, “Variable-Gain Adaptive Control Systems for Machine Tools,” J. Manufac. Syst., vol. 2, no. 2, pp. 165-174, 1983.
26. M. Tomizuka, J. Oh, and D. Domfeld, “Model Reference Adaptive Control of the Milling Process,” Control of Manufacturing Processes and Robotic Systems, New York: ASME, pp. 55-64, Nov. 1983.
27. M. Tomizuka and S. Zhang, “Modeling and Conventional/Adaptive Control of a Lathe Cutting Process,” Proc. Amer. Contr. Conf., Boston, MA, 1985.
28. L. K. Daneshmend and A. Pak, “Model Reference Adaptive Control of Feed Force in Turning,” ASME J. Dynam. Syst., Measur., Contr., vol. 108, no. 3, pp. 215-222, 1986.
29. L. K. Lauderbaugh and A. G. Ulsoy, “Dynamic Modeling for Control of the Milling Process,” ASMEJ. Eng. Ind., vol. 110, no. 4, pp. 367-375, 1988.
30. L. K. Lauderbaugh and A. G. Ulsoy, “Model Reference Adaptive Force Control in Milling,” ASME J. Eng. Ind. vol. 3, no. 1, pp. 13-21, Feb. 1989.
31. O. Turkay and A. G. Ulsoy, “Frequency versus Time Domain Parameter Estimation: Application to a Slot Milling Operation,” Mec. Syst. Signal Proc., vol. 2, no. 3, pp. 265-277, 1988.