A review on the analysis of laminated shells

Journal of Pressure Vessel Technology, Transactions of the ASME

Volumn 111, Issue 2, 1989, Pages 88-96

  Kapania, R K ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

LAMINATED PRODUCTS;

LAMINATED SHELL FINITE ELEMENTS; LAMINATED SHELLS; POSTBUCKLING ANALYSIS; SHELL THEORIES;

DOMES AND SHELLS;

EID: 0024657435     PISSN: 00949930     EISSN: 15288978     Source Type: Journal    
DOI: 10.1115/1.3265662     Document Type: Article

References (149)

1. Ahmad, S., Irons, B. M., and Zienkiewicz, O. C., 1970, “Analysis of Thick and Thin Shell Structures of Curved Finite Elements,” International Journal for Numerical Methods in Engineering, Vol. 2, pp. 419-451.
2. Almroth, B. O., Brogan, F. A., and Stanley, G. M., 1982, “Structural Analysis of General Shells, Vol. II, User Instructions for STAGSC-1,” Lockheed Palo Alto Research Laboratory, Palo Alto, Calif., Report LMSC-D633873, Dec.
3. Äusserer, M. F., and Lee, S. W., 1988, “An Eighteen Node Solid Element for Thin Shell Analysis,” International Journal for Numerical Methods in Engineering.
4. Banks, W. M., Tooth, A. S., and Wilson, P. M., 1988a, “Design of Composite Cylindrical Vessels for Fluid Loading,” Advances in Macro-Mechanics of Composite Material Vessels and Components, eds., D. Hui and T. J. Kojik, PVP-Vol. 146, PD-Vol. 18, pp. 117-128.
5. Bauld, N. R., Jr., and Satyamurthy, K., 1979, “Collapse Load Analysis for Plates and Panels,” AFFDL-TR-79-3038, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, Wright Patterson Air Force Base, Ohio.
6. Bert, C. W., 1980, “Analysis of Shells,” Analysis and Performance of Composites, ed., L. J. Broutman, Wiley, New York, N.Y., pp. 207-258.
7. Bert, C. W., 1983, “Comparison of New Plate Theories Applied to Laminated Composites,” Mechanics of Composite Materials, ed., G. J. Dvorak, ASME Winter Annual Meeting, Boston, Mass., Nov., pp. 1-9.
8. Bert, C. W., and Kumar, M., 1982, “Vibration of Cylindrical Shells of Bimodulus Composite Materials,” Journal of Sound and Vibration, Vol. 81, No. 1, pp. 107-121.
9. Biggers, S. B., and Dickson, J. N., 1984, “POSTOP: Postbuckled Open-Stiffener Optimum Panels-User's Manual,” NASA CR-172260.
10. Biricikoglu, V., and Kalnins, A., 1971, “Large Elastic Deformation of Shells with the Inclusion of Transverse Normal Strain,” International Journal of Solids and Structures, Vol. 7, pp. 431-444.
11. Blandford, G. E., Tauchert, T. R., and Leigh, D. C., 1988, “Effect of Internal Pressure on Thermoelastic Stresses in a Layered Vessel,” Advances in Macro-Mechanics of Composite Material Vessels and Components, eds., D. Hui and T. J. Kojik, PVP-Vol. 146, PD-Vol. 18, pp. 129-136.
12. Budiansky, B., 1968, “Notes on Nonlinear Shell Theory,” ASME Journal of Applied Mechanics, Vol. 35, pp. 393-401.
13. Bushnell, D., 1985, Computerized Buckling Analysis of Shells, Martinus Nijhoff Publishers, Boston and Lancaster.
14. Cederbaum, G., and Heller, R. A., 1988, “Dynamic Deformation of Orthotropic Cylinders,” Advances in Macro-Mechanics of Composite Material Vessels and Components, eds., D. Hui and T. J. Kojik, ASME, PVP-Vol. 146, PD-Vol. 18, June, pp. 43-48.
15. Chalmers, D. W., 1988, “The Properties and Uses of Marine Structural Materials,” Marine Structures, Vol. 1, No. 1, pp. 47-70.
16. Chao, C. C., Tung, T. P., and Chern, Y. C., 1988, “Buckling of Thick Orthotropic Spherical Shells,” Composite Structures, Vol. 9, No. 2, pp. 113-138.
17. Chao, W. C., and Reddy, J. N., 1984, “Analysis of Laminated Composite Shells Using a Degenerated 3D Element,” International Journal for Numerical Methods in Engineering, Vol. 20, pp. 1991-2004.
18. Chen, L.-W., and Chen, L.-Y., 1987, “Thermal Buckling of Laminated Cylindrical Plates,” Composite Structures, Vol. 8, pp. 189-205.
19. Citereley, R. L., 1986, “Computer Programs for Imperfection Sensitivity Analysis of Stiffened Cylindrical Shells,” WRC Bulletin 313, ISSN 0043-2326, Apr.
20. Citereley, R. L., 1987, “Imperfection Sensitivity of Composite Cylindrical Shells Under Combined Loads,” Design and Analysis of Composite Material Vessels, eds., D. Hui and T. J. Kojik, ASME, 1987, Pressure Vessel and Piping Conference, San Diego, Calif., June 28-July 2, pp. 63-73.
21. Davis, G. A. O., 1987, “Aircraft Structures - Metal or Composite,” Aluminum Structures: Advances, Design and Construction, ed., R. Narayanan, Elsevier Applied Science Publishers, London, pp. 171-184.
22. Davis, P. A., and Lopez, M. C., 1987, “Static Mechanical Properties of 30 x 11.5-14.5 Type VII, Aircraft Tires of Bias-Ply and Radial-Belted Design,” SAE Technical Paper No. 871868.
23. Dennis, S., and Palazotto, A., 1988, “Transverse Shear Deformation in Orthotropic Cylindrical Pressure Vessels Using a Higher Order Shear Theory,” Proceedings, 29th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, Part 2, April 18-20, pp. 613-622.
24. Dickson, J. N., and Biggers, S. B., 1984, “POSTOP: Postbuckled Open-Stiffener Optimum Panels — Theory and Capability,” NASA CR-172259.
25. Dong, S. B., 1968, “Free Vibrations of Laminated Orthotropic Cylinder Shells,” Journal of Acoustical Society of America, Vol. 44, No. 6, pp. 1628-1635.
26. Dong, S. B., 1972, “Studies Relating to the Structural Dynamic Behavior of Laminated Plates and Shells,” UCLA-ENG-7236, School of Engineering and Applied Science, University of.California, Los Angeles, Calif.
27. Dong, S. B., Pister, K. S., and Taylor, R. L., 1962, “On the Theory of Laminated Anisotropic Shells and Plates,” Journal of Aerospace Sciences, Vol. 29.
28. Dong, S. B., and Tso, F. K. W., 1972, “On a Laminated Orthotropic Shell Theory Including Transverse Shear Deformation,” ASME Journal of Applied Mechanics, Vol. 39, pp. 1091-1096.
29. Duthie, G., and Tooth, A. S., 1984, “Local Loads on Cylindrical Vessels: A Fourier Series Solution,” Behavior of Thin-Walled Structures, eds., J. Rhodes and J. Spence, Elsevier Applied Science, pp. 235-275.
30. Fettahlioglu, O. A., and Wang, P. C., 1977, “Asymptotic Solutions for Thermal Stresses and Deformations in Orthotropic Nonhomogeneous Shells of Revolution,” Proceedings, Third International Conference on Pressure Vessel Technology, Tokyo, Japan, April 19, pp. 93-103.
31. Fettahlioglu, O. A., and Steel, C. R., 1974, “Asymptotic Solutions of Orthotropic Nonhomogeneous Shells of Revolution,” Proceedings, Seventh U.S. National Congress of Applied Mechanics, University of Colorado, ASME Journal of Applied Mechanics, Vol. 41, No. 2, Sept., pp. 753-758.
32. Fettahlioglu, O. A., and Sayed, A., 1984, “Wave Propagation in Pressurized Layer Orthotropic Cylindrical Shells,” Proceedings, Fifth International Conference on Pressure Vessel Technology, San Francisco, Calif., September 9-14, pp. 530-541.
33. Fettahlioglu, O. A., 1986, “Inter-Laminar Shearing Stresses and Deformations in Layered Orthotropic Shells of Revolution Subjected to a Temperature Distribution,” Proceedings, Third Japan-U.S. Conference on Composite Materials, Tokyo, Japan, June 23-25.
34. Fettahlioglu, O., and Koenig, G., 1988, “Stress and Deformation Analysis of Multi-Layer Orthotropic Pressure Vessels,” Advances in Macro-Mechanics of Composite Material Vessels and Components, eds., D. Hui and T. J. Kojik, ASME, PVP-Vol. 146, PD-Vol. 18, June, pp. 85-96.
35. Gould, P. L., 1988, Analysis of Shells and Plates, Springer-Verlag, New York.
36. He, F. B., and Xia, T., 1988, “Three Dimensional Elasticity Solution for the Transversely Isotropic Spherical Shells,” Computational Mechanics’88, Theory and Applications, eds., S. N. Atluri andG. Yagawa, Proceedings of the International Conference on Computational Engineering Science, Atlanta, April 10-14, Springer-Verlag, Berlin, pp. 23.vii.1-23.vii.2.
37. Herakovich, C. T., and Johnson, E. R., 1981, “Buckling of Composite Cylinders Under Combined Compression and Torsion - Theoretical/Experimental Correlation,” Test Methods for Fibrous Composites, American Society for Testing and Materials (ASTM), Technical Publication 734, pp. 341-360.
38. Hirano, Y., and Vinson, J. R., 1987, “Nonlinear Vibrations of Composite Material Cylinder Shells Including Transverse Shear Deformation,” Design and Analysis of Composite Material Vessels, eds., D. Hui and T. J. Kojik, ASME, 1987 Pressure Vessel and Piping Conference, San Diego, Calif., June 28-July 2, pp. 55-63.
39. Howell, W. E., Perez, S. E., and Vogler, W. A., 1986, “Aircraft Tire Footprint Forces,” The Tire Pavement Interface, ASTM.
40. Hsu, T. M., and Wang, J. T. S., 1970, “A Theory of Laminated Cylindrical Shells Consisting of Layers of Orthotropic Laminae,” AIAA Journal, Vol. 8, p. 2141.
41. Hui, D., 1985, “Asymmetric Postbuckling of Symmetrically Laminated Cross Ply, Short Cylindrical Panels Under Compression,” Composite Structures, Vol. 3, pp. 81-95.
42. Hui, D., 1987, “Effects of Shear Loads on Vibration and Buckling of Antisymmetric Cross-Ply Cylindrical Panels,” International Journal of Nonlinear Mechanics.
43. Hui, D., and Du, I. H. Y., 1987a, “Initial Postbuckling Behavior of Imperfect, Antisymmetric Cross-Ply Cylindrical Shells Under Torsion,” ASME Journal of Applied Mechanics, Vol. 54, Mar., pp. 174-180.
44. Hui, D., and Du, I. H. Y., 1987b, “Imperfection-Sensitivity of Long Antisymmetric Cross-Ply Cylindrical Panels Under Shear Loads,” ASME Journal of Applied Mechanics, Vol. 54, June, pp. 292-298.
45. Idelsohn, S., Laschet, G., and Nyssen, C., 1982, “Pre- and Post-Degradation Analysis of Composite Materials with Different Moduli in Tension and Compression,” Computer Methods in Applied Mechanics and Engineering, Vol. 30, pp. 133-149.
46. Jeusette, J. P., Laschet, G., Charpentier, P., and Deloo, P., 1987, “Finite Element Analysis of Composite Revolution Structures Wound by Wide Plies,” Composite Structures, Vol. 8, No. 3, pp. 221-237.
47. Johnson, E. R., Hyer, M. W., and Carper, D. M., 1986, “Response of Composite Material Shallow Arch to Concentrated Load,” Journal of Aircraft, Vol. 23, No. 6, June, pp. 529-536.
48. Jones, R. M., 1975, Mechanics of Composite Materials, Hemisphere Publishing Corporation, N.Y.
49. Kapania, R. K., and Raciti, S., 1988, “A Twenty D.O.F. Element for the Nonlinear Vibrations of Unsymmetric Beams,” AIAA Journal.
50. Kapania, R. K., and Raciti, S., 1989a, “Recent Advances in Analysis of Laminated Beams and Plates-Part I, Shear Effects and Buckling,” AIAA Journal.
51. Kapania, R. K., and Raciti, S., 1989b, “Recent Advances in Analysis of Laminated Beams and Plates-Part II, Vibrations and Wave Propagation,” AIAA Journal.
52. Kapania, R. K., and Yang, T. Y., 1986, “Formulation of an Imperfect Quadrilateral Doubly Curved Shell Element for Post Buckling Analysis,” AIAA Journal, Vol. 24, No. 2, Feb., pp. 310-311.
53. Kapania, R. K., and Yang, T. Y., 1988, “Stability of Wind Loaded Cylindrical Shells,” International Journal for Wind Engineering and Aerodynamics, Vol. 28, pp. 281-290.
54. Keel, L. D., 1988, “Utilized Composite Fuselage Fuel Tank,” Proceedings, 29th AIAA/ASME/ASCE/AHS, Structures, Structural Dynamics and Materials Conference, Part II, Williamsburg, Va., April 18-20, pp. 1059-1064.
55. Khot, N. S., andBauld, N. R., Jr., 1982, “A Numerical and Experimental Investigation of Buckling Behavior of Composite Panels,” Computers and Structures, Vol. 15, p. 393.
56. Khot, N. S., and Bauld, N. R., Jr., 1983, “Further Comparison of the Numerical and Experimental Buckling Behaviors of Composite Panels,” Computers and Structures, Vol. 17, p. 277.
57. Knight, N. F., Jr., and Starnes, J. H., Jr., 1988, “Postbuckling Behavior of Selected Curved Stiffened Graphite-Epoxy Panels Loaded in Axial Compression,” AIAA Journal, Vol. 26, No. 3, pp. 344-352.
58. Kolkailah, F. A., 1988, “A Finite Element Presentation of an Optimum Design for Multiple Material Multilayered Cylindrical Pressure Vessels with Creep Relaxation,” Advances in Macro-Mechanics of Composite Material Vessels and Components, eds., D. Hui and T. J. Kojik, PVP-Vol. 146, PD-Vol. 18, pp. 97-102.
59. Kosmatka, J. B., 1988, “A Reliable Six-Node Triangular Plate/Shell Element for the Analysis of Laminated Composite Structures,” Proceedings, 29th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, Part II, Williamsburg, Va., April 18-20, pp. 911-920.
60. Kulkarni, S. V., and Zweben, C. H., eds., 1977, Composites in Pressure Vessels and Piping, ASME, PVP-PB-021.
61. Kung, L. E., Charek, L. T., Soedel, W., and Yang, T. Y., 1985, “Natural Frequencies and Mode Shapes of an Automotive Tire with Interpretation and Classification Using 3-D Computer Graphics,” Journal of Sound and Vibration, Vol. 102, No. 3, pp. 329-346.
62. Lakshminarayana, H. V., and Viswanath, S., 1976, “A High Precision Triangular Laminated Anisotropic Cylindrical Shell Finite Element,” Computers and Structures, Vol. 8, pp. 633-640.
63. Lakshminarayana, H. V., and Viswanath, S., 1977, “Influence of Material Orthotropy on the State of Stress Around a Circular Hole in a Cylindrical Shell,” ASME Journal of Pressure Vessel Technology, Vol. 99, pp. 454-458.
64. Lakshminarayana, H. V., and Murthy, S. S., 1984, “A Shear-Flexible Triangular Finite Element Model for Laminated Composite Plates,” International Journal for Numerical Methods in Engineering, Vol. 20, pp. 591-623.
65. Lee, S. W., Wong, S. C., and Rhiu, J. J., 1985, “Study of a Nine-Node Mixed Formulation Finite Element for Thin Plates and Shells,” Computers and Structures, Vol. 21, pp. 1325-1334.
66. Lee, S. W., Kim, Y. H., and Russel, R. M., 1988, “A Solid Element Formulation for Composite Shell Analysis,” Proceedings, 7th ASCE Engineering Mechanics Specialty Conference, Blacksburg, Va., p. 270.
67. Leigh, D. C., Tauchert, T. R., Chandra, U., and Podhorsky, M., 1981, “Selection of Structures for Large Diameter Thick-Wall Coal Conversion Pressure Vessels,” ASME, 81-WA/PVP-1.
68. Leissa, A. W., 1985, “Buckling of Laminated Composite Plates and Shell Panels,” Air Force Wright Aeronautical Lab., AFWAL-TR-85-3069.
69. Lekhnitskii, S. G., 1968, Anisotropic Plates, transl. by S. W. Tsai and T. Cheron, Gordon and Breach Science Publishers, London, pp. 471-476.
70. Libai, A., and Simmonds, J. G., 1988, The Nonlinear Theory of Elastic Shells-One Spatial Dimension, Academic Press, Inc., Boston.
71. Librescu, L., 1975a, Elastostatics and Kinetics of Anisotropic and Heterogeneous Shell-Type Structures, Noordhoff International Publishing, London.
72. Librescu, L., 1975b, 1976, “Improved Linear Theory of Elastic, Anisotropic Multilayered Shells,” (in Russian), Mekhanika Polimerov, Part I, No. 6, pp. 1038-1050, Nov.-Dec.; and Part II, No. 1, pp. 100-109, Jan.-Feb., English transl. by Plenum.
73. Librescu, L., 1987, “Refined Geometrically Nonlinear Theories of Anisotropic Laminated Shells,” Quarterly of Applied Mathematics, Apr., pp. 1-27.
74. Librescu, L., 1988a, “Geometrically Non-Linear Theory of Shear Deformable Anisotropic Laminated Composite Shallow Shells,” Proceedings, 7th ASCE Engineering Mechanics Specialty Conference, Blacksburg, Va., p. 283.
75. Librescu, L., and Stein, M., 1988b, “Nonlinear Theory and Postbuckling Behavior of Shear Deformable Symmetrically Laminated Composite Panels,” Proceedings, 16th ICAS Congress of Aeronautical Sciences, Jerusalem, Israel, Aug.
76. Lloyd, B. A., and Knight, G. K., “Impact Damage Sensitivity of Filament-Wound Composite Pressure Vessels,” Morton Thiokol, Inc., Wasatch Operations, Brigham City, Utah.
77. Maksimovic, S. M., 1984, “The Finite Element Analysis of the Stress Concentration in Fibrous Composite Plates and Shells,” Fourth World Congress and Exhibition on Finite Element Methods, ed., J. Robinson, September 17-21, Interlaken, Switzerland.
78. Maksimovic, S. M., 1988, “Buckling Analysis of Laminated Composite Shells with a Hole,” Proceedings, 7th ASCE Engineering Mechanics Specialty Conference, Blacksburg, Va., p. 235.
79. McCarty, J. L., and Tanner, J. A., 1983, “Temperature Distribution in Aircraft Tire,” NASA TP-2195.
80. Milford, R. V., and Schnobrich, W. C., “Degenerated Isoparametric Finite Elements Using Explicit Integration,” International Journal for Numerical Methods in Engineering, Vol. 23, 1986, pp. 133-154.
81. Morton Thiokol, Inc., “Experimental Data Provided to the Department of Civil and Environmental Engineering,” Utah State University, Logan, Utah.
82. Murthy, S. S., and Gallagher, R. H., 1983, “Anisotropic Cylindrical Shell Element Based on Discrete Kirchoff Theory,” International Journal for Numerical Methods in Engineering, Vol. 19, pp. 633-640.
83. Natarajan, R., and Widera, G. E. O., 1985, “Computer Aided Analysis of Filament Wound Pressure Vessels,” University Program in Computer Aided Engineering Design and Manufacturing (UPCAEDM), pp. 89-92.
84. Noor, A. K., and Anderson, C. M., 1982, “Mixed Models and Reduced/Selective Integration Displacement Models for Nonlinear Shell Analysis,” International Journal for Numerical Methods in Engineering, Vol. 18, pp. 1429-1454.
85. Noor, A. K., Anderson, C. M., and Tanner, J. A., 1988a, “Nonlinear Analysis of Shells of Revolution via Semi-Analytic Finite Elements with Application to Tires,” Computational Mechanics’88, Theory and Applications, eds., S. N. Atluri and G. Yagawa, Proceedings of the International Conference on Computational Engineering Science, Atlanta, April 10-14, Springer-Verlag, Berlin, pp. 27.i.1-27.i.4.
86. Noor, A. K., and Peters, J. M., 1987, “Analysis of Laminated Anisotropic Shells of Revolution,” Journal of Engineering Mechanics, Vol. 113, pp. 49-65.
87. Noor, A. K., and Tanner, J. A., 1988b, “Advances in Contact Algorithms and Their Application to Tires,” NASA TP-2781.
88. Noor, A. K., and Whitworth, S. L., 1987, “Non-Linear Analysis of Symmetric Structures with Unsymmetric Boundary Conditions,” Engineering Computations, Vol. 4, No. 2, pp. 161-171.
89. Ong, L. S., and Tooth, A. S., 1986, “The Effect of High Internal Pressure of Pipes and Cylindrical Vessels which are Subjected to Constraint and Initial Geometric Imperfections,” Applied Solid Mechanics 1, eds., A. S. Tooth and J. Spence, Elsevier Applied Science, pp. 305-329.
90. Owen, D. R. J., and Li, Z. H., 1988, “Elasto-Plastic Analysis of Laminated Anisotropic Shells by a Refined Finite Element Laminated Model,” Computational Mechanics’88, Theory and Applications, eds., S. N. Atluri and G. Yagawa, Proceedings of the International Conference on Computational Engineering Science, Atltanta, April 10-14, Springer-Verlag, Berlin, pp. 24.ii.l-24.ii.5.
91. Panda, S. C., and Natarajan, R., 1979, “Finite Element Analysis of Laminated Composite Plates,” International Journal for Numerical Methods in Engineering, Vol. 14, pp. 69-79.
92. Panda, S. C., and Natarajan, R., 1981, “Analysis of Laminated Composite Shell Structures by Finite Element Method,” Computers and Structures, Vol. 14, pp. 225-230.
93. Patel, H. P., and Kennedy, R. H., 1982, “Nonlinear Finite Element Analysis for Composite Structures of Axisymmetric Geometry and Loading,” Computers and Structures, Vol. 15, pp. 79-84.
94. Perez, S. E., and Tanner, J. A., 1988, “Experimental Research Supporting the National Tire Modeling Program,” Computational Mechanics 88, Theory and Applications, eds., S. N. Atluri andG. Yagawa, Proceedings of the International Conference on Computational Engineering Science, Atlanta, April 10-14, Springer-Verlag, Berlin, pp. 27.iv.l-27.iv.4.
95. Prucz, J. C., D’Acquisto, J., and Smith, J. E., 1988, “Dynamic Response of Composite Pressure Vessels to Inertia Loads,” Advances in Macro-Mechanics of Composite Material Vessels and Components, eds., D. Hui and T. J. Kojik, ASME, PVP-Vol. 146, PD-VoI. 18, June, pp. 55-62.
96. Rahman, D. H. A., Banks, W. M., and Tooth, A. S., 1985, “Behavior of GRP Pipes Under a Variety of Load Conditions,” Sixth International Conference on Plastic Pipes, York, England, pp. 13.1-13.6.
97. Rao, K. P., 1978, “A Rectangular Laminated Anisotropic Shallow Thin Shell Finite Element,” Computer Methods in Applied Mechanics and Engineering, Vol. 15, pp. 13-33.
98. Rao, K. P., 1987, “Shear-Buckling of Corrugated Composite Panels,” Composite Structures, Vol. 8, pp. 207-220.
99. Reddy, J. N., 1982, “Bending of Laminated Anisotropic Shells by a Shear Deformable Finite Element,” Fiber Science and Technology, Vol. 17, pp. 9-24.
100. Reddy, J. N., 1984a, “Exact Solutions of Moderately Thick Laminated Shells,” Journal of Engineering Mechanics, Vol. 110, No. 5, May, pp. 794-809.
101. Reddy, J. N., 1984b, Energy and Variational Methods in Applied Mechanics, Wiley, New York.
102. Reddy, J. N., and Chandrashekhra, K., 1985a, “Geometrically Nonlinear Analysis of Laminated Shells Including Transverse Shear Strains,” AIAA Journal, Vol. 23, No. 3, pp. 440-441.
103. Reddy, J. N., and Chandrashekhra, K., 1985b, “Geometrically Nonlinear Transient Analysis of Laminated Doubly-Curved Shells,” International Journal of Nonlinear Mechanics, Vol. 20, No. 2, pp. 79-90.
104. Reddy, J. N., and Liu, C. F., 1985, “A Higher-Order Shear Deformation Theory of Laminated Elastic Shells,” International Journal of Engineering Sciences, Vol. 23, No. 3, pp. 319-330.
105. Rhiu, J. J. and Lee, S. W., 1987, “A New Efficient Mixed Formulation for Thin Shell Finite Element Models,” International Journal for Numerical Methods in Engineering, Vol. 24, pp. 581-604.
106. Rhiu, J. J., and Lee, S. W., 1988, “A Nine-Node Finite Element for Analysis of Geometrically Nonlinear Shells,” International Journal for Numerical Methods in Engineering, accepted for publication.
107. Roy, A. K., and Tsai, S. W., 1987, “Design of Thick Composite Cylinders,” in Design and Analysis of Composite Material Vessels, eds., D. Hui and T. J. Kojik, ASME, 1987 Pressure Vessel and Piping Conference, San Diego, Calif., June 28-July 2, pp. 75-86.
108. Rothert, H., Idelberger, H., Jocobi, W., and Laging, G., 1984, “On the Finite Element Technique of the Three-Dimensional Tire Contact Problem,” Nuclear Engineering and Design, Vol. 78, pp. 363-375.
109. Saigal, S., Kapania, R. K., and Yang, T. Y., 1986, “Geometrically Nonlinear Finite Element Analysis of Imperfect Laminated Shells,” Journal of Composite Materials, Vol. 20, pp. 197-214.
110. Saigal, S., Yang, T. Y., and Soedel, W., 1988, “Inflation and Contact Predictions of Composite Tire Shell Carcass,” Journal of Aircraft, Feb.
111. Sanders, J. L., 1963, “Nonlinear Theories for Thin Shells,” Quarterly of Applied Mathematics, Vol. 21, pp. 21-36.
112. Sanz, M. A., and Morris, G. R., 1988, “A Fully-Integrated General Finite Element for the Nonlinear Analysis of Plates and Shells,” Proceedings, 7th ASCE Engineering Mechanics Specialty Conference, Blacksburg, Va., p. 291.
113. Shaw, D., and Simitses, G. J., 1982, “Imperfect, Laminated Cylindrical Shells in Torsion and Axial Compression,” 33rd Congress of the International Astronautical Federation (IAF ‘82), September 27-October 2, Paris, France, AIAA.
114. Shaw, D., and Simitses, G. J., 1984, “Instability of Laminated Cylinders in Torsion,” ASME Journal of Applied Mechanics, Vol. 51, pp. 188-191.
115. Sheinman, I., and Grief, S., 1984, “Dynamic Analysis of Laminated Shells of Revolution,” Journal of Composite Materials, Vol. 18, pp. 200-212.
116. Sheinman, I., and Simitses, G. J., 1983, “Buckling and Postbuckling of Imperfect Cylindrical Shells Under Axial Compression,” Computers and Structures, Vol. 17, p. 277.
117. Shivakumar, K. N., Elber, W., and Illg, W., 1983, “Analysis of Progressive Damage in Thin Circular Laminates,” Proceedings, 24th AIAA/ASME/ ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Lake Tahoe, Nev., May 2-4.
118. Simitses, G. J., Shaw, D., and Sheinman, I., 1985a, “Stability of Imperfect Laminated Cylinders: A Comparison Between Theory and Experiment,” AIAA Journal, Vol. 23, No. 7, pp. 1086-1092.
119. Simitses, G. J., Shaw, D., and Sheinman, I., 1985b, “Axial Compression,” Composite Structures, Vol. 4, No. 4, pp. 335-360.
120. Singer, J., 1987, “Experimental Techniques and Comparison with Theoretical Results,” Buckling and Post-Buckling, eds., J. Arbocz, M. Potier-Ferry, J. Singer, and V. Tvergaard, Springer-Verlag.
121. Sumihara, K., Kobayashi, S., and Koyama, K., 1981, “Shear Buckling Strength of CFRP Laminated Panels, 1st Report,” Journal of the Japan Society for Aeronautical and Space Sciences, Vol. 29, June, pp. 321-332.
122. Sutjahjo, E., 1987, “Shell Finite Element Kinematics for Improved Bending, Membrane and Shear Behavior,” Ph.D. dissertation, The Johns Hopkins University, Baltimore, Md.
123. Takezono, S., and Migita, K., 1988, “The Creep of Anisotropic MultiLayered Moderately Thick Shells of Revolution,” Computational Mechanics’88, Theory and Applications, eds., S. N. Atluri and G. Yagawa, Proceedings of the International Conference on Computational Engineering Science, Atlanta, April 10-14, Springer-Verlag, Berlin, pp. 21.vii. 1-21.vii.4.
124. Tan, T. M., and Sun, C. T., 1985, “Use of Statical Indentation Laws in the Impact Analysis of Laminated Composite Plates,” ASME Journal of Applied Mechanics, Vol. 52, Mar., pp. 6-12.
125. Tessler, A. and Hughes, T. J. R., 1985, “Three-Node Mindlin Plate Element With Improved Transverse Shear,” Computer Methods in Applied Mechanics and Engineering, Vol. 50, pp. 71-101.
126. Tooth, A. S., Banks, W. M., and Rahman, D. M. A., 1988a, “The Specially Orthotropic GRP Multi-Layered Cylindrical Shell-A Theoretical Approach for the General Loading Case,” Composite Structures, Vol. 9, No. 1, pp. 53-68.
127. Tooth, A. S., Banks, W. M., and Rahman, D. H. A., 1988b, “The Specially Orthotropic GRP Multi-Layered Cylindrical Shell-The Radial Patch Load,” Composite Structures, Vol. 9, No. 1, pp. 69-84.
128. Tooth, A. S., Banks, W. M., and Rahman, D. H. A., 1988c, “The Specially Orthotropic GRP Multi-Layered Cylindrical Shell - The Fluid Loading of the Partially Filled Horizontal Vessel or Pipe,” Composite Structures, Vol. 9, No. 2, pp. 101-112.
129. Tooth, A. S., Banks, W. M., and Wilson, P. M., 1988, “A Study of the Multi-Layered GRP Composite Cylindrical Vessel,” Proceedings, 7th International Conference, Offshore Mechanics and Arctic Engineering, Houston, Tex., Vol. 3, pp. 13-18.
130. Tsai, S. W., and Hahn, H. T., 1980, Introduction to Composite Materials, Technomic Publishing Co., Westport, Conn.
131. Van Zelst, R. F. P., 1985, “Hand Calculation Method for Buckling of Composite Shell Structures,” ESA Workshops on Composite Design for Space Applications, October 15-18.
132. Vanderpool, M. E., and Bert, C. W., 1981, “Vibration of a Materially Monoclinic, Thick-Wall Circular Cylindrial Shell,” AIAA Journal, Vol. 19, No. 5, pp. 634-641.
133. Venkatesh, A., and Rao, K. P., 1983, “Analysis of Laminated Shells with Laminated Stiffeners Using Rectangular Shell Finite Elements,” Computer Methods in Applied Mechanics and Engineering, Vol. 38, pp. 255-272.
134. Vinson, J. R., and Chou, T. W., 1974, Composite Materials and Their Use in Structures, John Wiley and Sons, New York.
135. Vinson, J. R., and Sierkowsaky, R. L., 1986, The Behavior of Structures Composed of Composite Materials, Martinus Nijhoff Publishers, Boston.
136. Weichert, D., 1988, “Anisotropic Elastic-Plastic Shells at Moderate Rotations,” Proceedings, 7th ASCE Engineering Mechanics Specialty Conference, Blacksburg, Va., p. 282.
137. Whitney, J. M., 1984, “Buckling of Anisotropic Laminated Cylindrical Plates,” AIAA Journal, Vol. 22, No. 11, pp. 1641-1645.
138. Whitney, J. M., and Sun, C. T., 1973, “A Higher Order Theory for Exten-sional Motion of Laminated Anisotropic Shells and Plates,” Journal of Sound and Vibration, Vol. 30, pp. 85-91.
139. Whitney, J. M., and Sun, C. T., 1974, “A Refined Theory for Laminated Anisotropic, Cylindrical Shells,” ASME Journal of Applied Mechanics, pp. 471-476.
140. Widera, G. E. O., and Moumane, M., 1988, “Cut-Outs in Laminated Plates and Shells,” Advances in Macro-Mechanics of Composite Material Vessels and Components, eds., D. Hui and T. J. Kojik, PVP-Vol. 146, PD-Vol. 18, pp. 155-158.
141. Wu, C.-H., 1971, “Buckling of Anisotropic Circular Cylindrical Shells,” Ph.D. dissertation, Case Western Reserve University, Cleveland, Ohio, June.
142. Yener, M., and Wolcott, E., 1988, “Damage Assessment Analysis of Composite Pressure Vessels Subjected to Random Impact Loading,” Advances in Macro-Mechanics of Composite Material Vessels and Components, eds., D. Hui and T. J. Kojik, PVP-Vol. 146, PD-Vol. 18, June, pp. 219-226.
143. Yeom, C. H., and Lee, S. W., 1988, “An Assumed Strain Finite Element Model for Large Deflection Composite Shells,” Proceedings of the 29th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, Williamsburg, Va., April 18-20, pp. 928-936.
144. Yunus, S. M., Kohnke, P. C., and Saigal, S., 1988, “An Efficient ThroughThickness Integration Scheme in an Unlimited Layer Doubly Curved Isoparametric Composite Shell Element,” International Journal for Numerical Methods in Engineering, submitted for review.
145. Zhang, Y., and Matthews, F. L., 1984, “Postbuckling Behavior of Anisotropic Laminated Plates Under Pure Shear and Shear Combined with Compressive Loading,” AIAA Journal, Vol. 2, No. 2, pp. 281-286.
146. Zhang, Y., and Matthews, F. L., 1981, “Postbuckling of Cylindrical Curved Panels of Generally Layered Composite Materials with Small Initial Imperfections of Geometry,” Composite Structures, ed., I. H. Marshall, Applied Science Publisher, London, England, pp. 428-441.
147. Zhang, Y., and Matthews, F. L., 1983a, “Initial Buckling of Curved Panels of Generally Layered Composite Materials,” Composite Structures, Vol. 1, No. 1, pp. 3-30.
148. Zhang, Y., and Matthews, F. L., 1983b, “Postbuckling Behavior of Curved Panels of Generally Layered Composite Materials,” Composite Structures, Vol. 1, No. 2, pp. 115-135.
149. Zukas, J. A., and Vinson, J. R., 1971, “Laminated Transversal Isotropic Cylindrical Shells,” ASME Journal of Applied Mechanics, Vol. 38, pp. 400-407.