Review of magnetic methods for nondestructive evaluation

NDT International

Volumn 21, Issue 5, 1988, Pages 311-319

  Jiles, D C ^a  

^a IOWA STATE UNIVERSITY   (United States)

Author keywords

Barkhausen effect; magnetic hysteresis; magnetic techniques for NDE; magnetically induced velocity change; magnetoacoustic emission; residual field

Indexed keywords

FERROMAGNETIC METALS--HYSTERESIS; MAGNETOACOUSTIC EFFECTS--APPLICATIONS; STEEL STRUCTURES--NONDESTRUCTIVE EXAMINATION;

MAGNETIC BARKHAUSEN EFFECT; REMANENT MAGNETIZATION; RESIDUAL FIELD;

NONDESTRUCTIVE EXAMINATION;

NON-DESTRUCTIVE TESTING;

EID: 0024089063     PISSN: 03089126     EISSN: None     Source Type: Journal    
DOI: 10.1016/0308-9126(88)90189-7     Document Type: Article

References (114)

1. Two phenomena revealed with the help of new amplifiers
2. The Barkhausen effect and its application in nondestructive testing
3. Barkhausen effect—an indication of stress
4. Influence of elastic and plastic strain on the magnetization process in Fe-3.5% Si
5. Nondestructive magnetic measurement of steel grain size
6. On the influence of microstructure on magnetization transitions in steel
7. The use of Barkhausen noise analysis in nondestructive testing
8. The influence of cyclic stressing on the Barkhausen effect in polycrystalline iron
9. A new electronic grain size analyzer for technical steel
10. Detection of plastic deformation during fatigue of mild steel by the measurement of Barkhausen noise
11. Fatigue hardening and softening in mild steel detected from Barkhausen noise
12. Influence of tensile and cyclic loading upon Barkhausen noise in a mild steel
13. Two ferromagnetic methods for the evaluation of the fatigue limit in polycrystalline iron
14. Magnetic noise method in nondestructive inspection of ferromagnetics
15. Review of the application of the Barkhausen effect in nondestructive inspection
16. Control of phase transformations in ferromagnetic materials with the aid of the Barkhausen effect and parameters of the hysteresis loop
17. Effect of surface plastic deformation of steel components on the parameters of the Barkhausen effect
18. Nondestructive testing of surface decarburization of steel
19. Nondestructive testing of surface decarburization
20. Electro magnetic nondestructive evaluation of surface decarburization on steels: feasibility and possible applications
21. Heat treatment evaluation by means of magnetic methods
22. Determination of residual stresses using micromagnetic parameters
23. Nondestructive testing of laser hardening parameters
24. Nondestructive determination of residual and applied stress by micromagnetic and ultrasonic methods
25. Nondestructive analysis of the structure of pressure vessel steels by micromagnetic testing techniques
26. The Barkhausen effect and its applications to nondestructive evaluation
27. The magnetic Barkhausen effect
28. Acoustic emission
29. Stress effect on the magnitude of acoustic emission during magnetization of ferromagnetic materials
30. Magnetomechanical acoustic emission of iron and steels
31. Magnetomechanical acoustic emission—a new method for nondestructive stress measurement
32. Determination of residual stress by magnetomechanical acoustic emission
33. Acoustic methods for obtaining Barkhausen noise stress measurements
34. Determination of microstructural parameters by magnetic and ultrasonic quantitative NDE
35. The effect of stress and sample shape on the magnitude and frequency of magnetomechanical acoustic emission
36. Magnetoacoustic emission, magnetization and Barkhausen effect in decarburized steel
37. Magnetic properties of decarburized steels: an investigation of the effects of grain size and carbon content
38. Sources of acoustic emission generated during the tensile deformation of pure iron
39. Theory of the magnetization process in ferromagnets and its application to the magnetomechanical effect
40. Magnetic inspection of the heat treatment quality of cold rolling steels
41. Nondestructive magnetic inspection of hardened and tempered parts of low alloy constructional and plain carbon steels
42. Coercive force measurement methods of inspecting the quality of heat and thermochemical treatments of steel and iron parts
43. Nondestructive magnetic quality control method for the heat treatment of steels 30 KhN2MFA and 40 Kh
44. An instrument for nondestructive magnetic testing of the hardness of tempered parts of constructional and straight carbon steels
45. A magnetic method of inspecting the quality of high temperature tempering of constructional and straight carbon steels
46. Effects of heat treatment on the magnetic and electrical properties of 18 KhNVA, 34 KhN3M and U9A steels
47. Interrelation of the magnetic and mechanical properties with the structural state of hardened and tempered products
48. Relationship of magnetic properties to the structural condition of a substance — the physical basis of magnetic structure analysis
49. Magnetic structure analysis
50. Magnetic, electrical and mechanical properties of steel 35SGM after hardening and tempering
51. Magnetic inspection of the hardness and structure of KhVG steel in the annealed condition
52. Magnetic, electrical and mechanical properties of 38 KhGNM steel after quenching and tempering
53. Magnetic, electrical and mechanical parameters of 45 KhN and 45 KhNMFA steels after various heat treatments
54. Electromagnetic measurement of the mechanical properties of parts made of 50 KhG and 50 KhFA steels
55. Nondestructive measurement of the depth and hardness of the carburized case on parts of 12 KhN3A and 12 Kh2N4A steels
56. Inspection of steel products with little variation in the coercive force
57. Magnetic inspection of the hardness of steel ShKh15 pipes
58. Possibility of nondestructive testing of 50RA steel parts
59. Magnetic characteristics of 38 KhS steel parts after isothermal hardening
60. Coercivity of heat treated structural steels in various remanent magnetization states
61. Measurement of the magnetic permeability and specific electrical conductivity of steel components
62. Improving devices for setting magnetic flaw detectors in inspection of hot rolled pipes
63. Possibilities of the nondestructive magnetic inspection of hardness of 32 Kh2NVMBR high strength steel
64. Feasibility of electromagnetic inspection for the strength and hardness of structural steel under elastic tension
65. Study of magnetoelastic effect in rail steel
66. Using ferroprobes for testing the rails of electromagnetic wagon defectoscopes
67. Nature of the relationship between the mechanical and magnetic properties of carbon steel
68. Magnetic hysteresis under simultaneous action of static and dynamic stresses
69. Magnetoelastic characteristics of steel subjected to quasistatic effects
70. Magnetoelastic effect in the excitation of steel by elastic oscillations
71. Magnetoelastoacoustic method of nondestructive inspection of heat treatment quality for steels
72. Theory of ferromagnetic hysteresis
73. The effects of stress on the magnetization of steel
74. Effects of grain size hardness and stress on the magnetic hysteresis loops of ferromagnetic steels
75. Inverse magnetostrictive effect and electromagnetic nondestructive testing methods
76. Derivation and application of an equation to the B-H loop
77. Harmonic analysis of B-H loops of constructional steel
78. Harmonic analysis of B-H loops
79. Über die magnetische Nachwirkung
80. Theory of ferromagnetic hysteresis
81. Influence of stresses on the hysteresis curve in constructional steel
82. A model for the effect of tensile and compressive stress on ferromagnetic hysteresis
83. Magnetic studies of residual stress in iron and steel induced by uniaxial deformation
84. Fail-safe magnetic permeability inspections of high-strength steel (low alloy) critical aerospace components, subject to fatigue failure
85. Measurements of magnetic material changes in steels with fatigue
86. A study of fatigue in ferromagnetic materials using a magnetic hysteresis technique
87. Magnetic NDT technique to evaluate fatigue damage
88. Quality control of ferromagnetic components by coercive field strength measurement
89. On line measurement of the microstructure and mechanical properties of steel
90. NDE applications of magnetic leakage field methods
91. Use of a magnetic field intensity meter to detect accumulations of magnetic oxide in stainless steel boiler tubing
92. Stress induced magnetization changes of steel pipes — laboratory tests
93. Stress induced magnetization changes of steel pipes — laboratory tests (part 2)
94. Effects of stress on magnetization
95. Magnetic inspection of the mechanical properties of steel pipes
96. Nondestructive estimation of residual stress in welded pressure vessel steel by means of remanent magnetization measurement
97. Measurement of the mechanical stress in mild steel by means of rotation of magnetic field strength
98. Measurement of the mechanical stress in mild steel by means of rotation of magnetic field strength — part 2: biaxial stress
99. Measurement of the mechanical stress in mild steel by means of rotation of magnetic field strength — part 3: practical applications
100. The effect of stress on the magnetization of mild steel at moderate field strengths
101. Alternating magnetization modes in the quality control of hardened and tempered articles from the value of the residual magnetic induction
102. Nondestructive magnetic inspection of hardened and tempered parts of low alloy constructional and plain carbon steels
103. Quality control of products according to the internal field when magnetized with an attached electromagnet
104. Optimum geometric dimensions of search electromagnets in coercimeters for quality inspection of steel and cast iron parts surface hardened by thermal or chemical impregnation treatment
105. Second order elastic deformation of solids
106. Tensile stress dependence of magnetically induced ultrasonic shear wave velocity change in polycrystalline A-36 steel
107. Stress dependence of magnetically induced ultrasonic shear wave velocity change in polycrystalline A-36 steel
108. Residual stress characterization with an ultrasonic/magnetic technique
109. Magnetoacoustic stress measurements in steel
110. Low field magnetoacoustic residual stress measurement in steel
111. Effect of texture on magnetoacoustic stress measurement in steel
112. Effects of grain size and cooling rate on magnetoacoustic stress measurement in AISI 4140 steel
113. A nondestructive measurement of residual bulk stresses in welded steel specimens by use of magnetically induced velocity changes for ultrasonic waves