A survey of heat transfer in compressible separated and reattached flows

AIAA Journal

Volumn 26, Issue 2, 1988, Pages 144-150

  Merzkirch, W ^a   Page, R H ^b   Fletcher, L S ^b  

^a UNIVERSITY OF DUISBURG ESSEN   (Germany)

^b TEXAS A AND M UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AERODYNAMICS - HEAT TRANSFER; HEAT TRANSFER - CONVECTION;

COMPRESSIBLE REATTACHED FLOWS; COMPRESSIBLE SEPARATED FLOWS;

FLOW OF FLUIDS;

EID: 0023961368     PISSN: 00011452     EISSN: None     Source Type: Journal    
DOI: 10.2514/3.9865     Document Type: Article

References (57)

1. Fletcher, L. S., Briggs, D. G., and Page, R. H., “Heat Transfer in Separated and Reattached Flows: An Annotated Review,” Israel Journal of Technology, Vol. 12, 1974, pp. 236-261.
2. Lamb, J. P., “Convective Heat Transfer Correlations for Planar, Supersonic, Separated Flows,” Transactions of ASME Journal of Heat Transfer, Vol. 102, May 1980, pp. 351-356.
3. Bertin, J. J., Lamb, J. P., Zickler, J. L., and Goodrich, W. D., “Heat Transfer Measurements for Cylindrical Configurations in Hypersonic Streams,” Journal of Spacecraft and Rockets, Vol. 10, 1973, pp. 217-218.
4. Lamb, J. P., “Correlation of Convective Heat Transfer for Open Cavities in Supersonic Flow,” AIAA Progress in Astronautics and Aeronautics: Aerothermodynamics and Planetary Entry, edited by A. L. Crosbie, Vol. 77, AIAA, New York, 1981, pp. 36-50.
5. Ota, T. and Kon, N., “Heat Transfer in the Separated and Reattached Flow Over Blunt Flat Plates—Effects of Nose Shape,” International Journal of Heat and Mass Transfer, Vol. 22, Feb. 1979, pp. 197-206.
6. Ota, T., Kon, N., Hatakeyama, S., and Sato, S., “Measurements of Turbulent Shear Stress and Heat Flux in an Axisymmetric Separated and Reattached Flow over a Longitudinal Blunt Circular Cylinder,” Journal of the JSME, Vol. 23, No. 184, Oct. 1980, pp. 1639-1645.
7. Ota, T. and Kon, N., “Turbulent Transfer of Momentum and Heat in a Separated and Reattached Flow over a Blunt Flat Plate,” Transactions of ASME Journal of Heat Transfer, Vol. 102, Nov. 1980, pp. 749-754.
8. Inoue, Y. and Page, R. H., “Aerothermodynamic Base Heating,” AIAA Progress in Astronautics and Aeronautics: Aerodynamic Heating and Thermal Protection Systems, edited by L. S. Fletcher, Vol. 59, AIAA, New York, 1978, pp. 49-65.
9. Aung, W., “Interferometric Investigation of Separated Forced Convection in Laminar Flow Past Cavities,” Proceedings of Joint ASME-AICHE National Heat Transfer Conference, ASME 83-HT-81, New York, 1983.
10. Bulmer, B. M., “Flight Test Correlation Technique for Turbulent Base Heat Transfer with Low Ablation,” Journal of Spacecraft and Rockets, Vol. 10, March 1973, pp. 222-224.
11. Bulmer, B. M., “Re-Entry Vehicle Base Pressure and Heat-Transfer Measurements at M=18,” Journal of Spacecraft and Rockets, Vol. 13, 1975, pp. 522-524.
12. Nestler, D. E. and Brant, D. M., “Development of an Afterbody Radiative and Convective Heating Code for Outer Planet Probes,” AIAA Paper 78-862, 1978.
13. Brandon, H. J., Masek, R. V., and Dunavant, J. C., “Aerodynamic Heating to Corrugation Stiffened Structures in Thick Turbulent Boundary Layers,” AIAA Journal, Vol. 13, Nov. 1975, pp. 1460-1466.
14. Inger, G. R., “Supersonic Laminar Base Pressure, Heat Transfer, and Upstream Influence Correlation for Small Steps,” AIAA Journal, Vol. 12, Aug. 1974, pp. 1157-1158.
15. Jakubowski, A. K. and Lewis, C. H., “Experimental Study of Supersonic Laminar Base Flow With and Without Suction,” AIAA Journal, Vol. 11, 1973, pp. 1670-1677.
16. Orlov, V. V., Ovchinnikov, V. V., Mukhina, N. N., and Karsten, V. M., “Investigation of Turbulence and Heat Transfer in a Separating Flow Behind a Step,” Heat Transfer—Soviet Research, Vol. 16, No. 2, March-April 1984, pp. 58-68.
17. Gortyshov, Y. F., Varfolomeev, I. M., and Schchukin, V. K., “Study of Heat Transfer in Separated Zones Formed by Rectangular Cavities,” Soviet Aeronautics, Vol. 25, No. 1, 1982, pp. 33-39 (English translation by Allerton Press, New York).
18. Bulmer, B. M., “Detection of Flight Vehicle Transition from Base Measurements,” Journal of Spacecraft and Rockets, Vol. 10, April 1973, pp. 280-281.
19. Balakrishnam, A. and Chu, E., “Jupiter Entry Probe Afterbody Convective Heating,” AIAA Paper 79-0040, Jan. 1979.
20. Bulmer, B. M., “Heat Transfer Measurements in a Separated Laminar Base Flow,” Journal of Spacecraft and Rockets, Vol. 14, Nov. 1977, pp. 701-702.
21. Yamamota, Y., “Numerical Simulation of Hypersonic Viscous Fore- and Afterbody Flows over Capsule Type Vehicles at Angles of Attack,” AIAA Paper 85-924, 1985.
22. Bulmer, B. M., “Radial Base Heat-Transfer Gradients in Turbulent Flow,” Journal of Spacecraft and Rockets, Vol. 11, Nov. 1974, pp. 798-800.
23. Kim, B. S. C., “A Shock Tube Investigation of Heat Transfer in the Base Region of a Slender Cone-Hemisphere,” AIAA Paper 78-846, May 1978.
24. Igarashi, T., “Fluid Flow and Heat Transfer in the Separated Region of a Circular Cylinder with Wake Control,” Heat Transfer Japanese Research, Vol. 11, No. 3, July-Sept. 1982, pp. 1-16.
25. Nomura, S., “Similar Boundary-Layer Analysis for Lee-Surface Heating on Yawed Blunted Cone,” AIAA Journal, Vol. 14, Nov. 1976, pp. 1509-1510.
26. Zappa, O. L. and Reinecke, W. F., “An Experimental Investigation of Base Heating on Typical Mars Entry Body Shapes,” Journal of Spacecraft and Rockets, Vol. 10, 1973, pp. 273-276.
27. Bales, E. L. and Korst, H. H., “Heat Transfer Within and Across Nearly Circular Cavities,” ASME Paper 74-WA/HT-62, 1974.
28. Charalambous, C. S., “Convective Base Heat Transfer from an Axisymmetric Bluff Body in Subsonic Flow,” M.S. Thesis, Mechanical Engineering Dept., Clemson University, Clemson, SC, Aug. 1985.
29. Chen, S. J. and Tsou, F., “Computer-Based Data Acquisition of Heat Transfer in Short-Duration Flow over a Backward-Facing Step,” ASME Paper 84-HT-47, 1984.
30. Gooray, A. M., Walkins, C. B., and Aung, W., “Turbulent Heat-Transfer Computations for Rearward-Facing Steps and Sudden Pipe Expansions,” Transactions of ASME, Journal of Heat Transfer, Vol. 107, 1985, pp. 70-76.
31. Seki, N., Fukusako, S., and Hirata, T., “Turbulent Fluctuations and Heat Transfer for Separated Flow Associated with a Double Step at Entrance to an Enlarged Flat Duct,” Transactions of ASME, Journal of Heat Transfer, Vol. 98, Nov. 1976, pp. 588-593.
32. Seki, N., Fukusaki, S., and Hirata, T., “Laminar Heat Transfer Downstream of a Sudden Enlargement of a Duct,” JSME Bulletin, Vol. 21, Feb. 1978, pp. 254-257.
33. Sparrow, E. M., Samie, F., and Lau, S. C., “Heat Transfer from a Plate Elevated Above a Host Surface and Washed by a Separated Flow Induced by the Elevation Step,” Transactions of ASME, Journal of Heat Transfer, Vol. 103, Aug. 1981, pp. 441-447.
34. Tsou, F. K., “Computer-Based Data Acquisition of Heat Transfer in Short Duration Flows over Backward-Facing Steps,” ASME Paper 84-HST-47, 1984.
35. Lamb, J. P. and Polansky, G. F., “Finite Element Simulation of Incompressible Recirculating Flows with Heat Transfer,” Proceedings of the Symposium on Fluid Dynamics, Dept, of Mechanical and Industrial Engineering, University of Illinois, Champange, April 1984, pp. 189-201.
36. Chiney, C. C. and Launder, B. E., “On the Calculation of Turbulent Heat Transport Downstream from an Abrupt Pipe Expansion,” Numerical Heat Transfer, Vol. 3, 1980, pp. 189-207.
37. Gerhart, P. M. and Thimar, L. C., “A Model of Turbulent Momentum and Heat Transfer at Points of Separation and Reattachment,” Proceedings of the Heat Transfer and Fluid Mechanics Institute, Stafford University Press, pp. 122-134, June 1974.
38. Nestler, D. E., “Engineering Analysis of Reattaching Shear Layer Heat Transfer,” AIAA Journal, Vol. 11, 973, pp. 390-392.
39. Matthews, R. D. and Ginoux, J. J., “Correlation of Peak Heating in the Reattachment Region of Separated Flows,” AIAA Journal, Vol. 12, March 1974, pp. 397-399.
40. Rudy, D. H. and Birch, S. F., “Mean Flow Development and Surface Heating for an Attaching Compressible Free Shear Layer,” Journal of Spacecraft and Rockets, Vol. 11, May 1974, pp. 348-357.
41. Keyes, J. W., “Correlation of Turbulent Shear Layer Attachment Peak Heating Near Mach 6,” AIAA Journal, Vol. 15, Dec. 1977, pp. 1821-1823.
42. Gerhart, P. M., “Heat Transfer Downstream of Attachment of a Turbulent Supersonic Shear Layer,” AIAA Journal, Vol. 11, 1973, pp. 104-106.
43. Werle, M. J., Vatsa, V. N., and Bertke, S. D., “Sweep Effects on Supersonic Separated Flow—A Numerical Study,” AIAA Journal, Vol. 11, 1973, pp. 1763-1765.
44. Inger, G. R., “Three-Dimensional Heat- and Mass-Transfer Effects Across High-Speed Reattaching Flows,” AIAA Journal, Vol. 15, 1977, pp. 383-389.
45. Vogel, J. C. and Eaton, J. K., “Combined Heat Transfer and Fluid Dynamic Measurements Downstream of a Backward-Facing Step,” Transactions of ASME, Journal of Heat Transfer, Vol. 107, 1985, pp. 922-929.
46. Kang, Y., Nishino, J., Suzuki, K., and Sato, T., “Application of Flow Surface-Temperature Visualization Techniques to a Study of Heat Transfer in Recirculating Flow Regions,” Flow Visualization II, Hemisphere Publishing, Washington, DC, 1982, pp. 77-81.
47. MacGregor, J. D. Ill, “An Experimental Study of Radial Jet Reattachment on a Flat Plate,” M.S. Thesis, Mechanical Engineering Dept., Texas A&M University, College Station, May 1986.
48. Suzuki, K., Ida, S., and Sato, T., “Turbulence Measurements Related to Heat Transfer in an Axisymmetric Confined Jet with Laser-Doppler Anemometer,” Proceedings of 4th Symposium in Turbulent Shear Flows, Karlsruhe, FRG, Hemisphere Publishing, Washington, DC, Sept. 1983, pp. 18.1-18.6.
49. Baughn, J. W., Hoffman, M. A., Takahashi, R. K., and Launder, B. E., “Local Heat Transfer Downstream of an Abrupt Expansion in a Circular Channel with Constant Wall Heat Flux,” Transactions of ASME, Journal of Heat Transfer, Vol. 106, Nov, 1984, pp. 789-796.
50. Ganji, A. R. and Sawyer, R. F., “Experimental Study of the Flow Field of a Two-Dimensional Pre-Mixed Turbulent Flame,” AIAA Journal, Vol. 18, July 1980, pp. 817-824.
51. Edelman, R. B., Marsha, P. T., and Schmotolocha, S. N., “Modeling Techniques for the Analysis of Ramjet Combustion Processes,” AIAA Journal, Vol. 19, May 1981, pp. 601-609.
52. Murthy, S. N. B., Osborn, J. R., Barrows, A. W., and Ward, J. R. (eds.) AIAA Progress in Astonautics and Aeronautics: Aerodynamics of Base Combustion, Vol. 40, MIT Press, Cambridge, MA, 1976.
53. Hudgins, H. E. Jr., “Range Increase of Projectiles by Heat and/or Mass Addition to Base or External Flow,” AIAA Progress in Astronautics and Aeronautics: Aerodynamics of Base Combustion, Vol. 40, edited by S. N. B. Murthy, J. R. Osborn, A. W. Barrows, and J. R. Ward, AIAA, New York, 1976, pp. 495-521.
54. Maeda, M., Kiyota, K., and Mishita, K., “Heat Transfer to Gas Solids Two-Phase Flow in Separated, Reattached, and Redevelopment Regions,” Proceedings of 7th International Heat Transfer Conference, Hemisphere Publishing, Washington, DC, 1982, pp. 249-254.
55. Rossiter, J. E., “Wind Tunnel Experiments on the Flow Over Rectangular Cavities at Subsonic and Transonic Speeds,” Royal Aeronautical Establishment, London, R&M 3438, AD 805489, 1966.
56. Gharib, M., “Active Control of Cavity Shear Layer Oscillation,” AIAA Paper 85-0528, 1985.
57. White, R. A., “Some Results on the Heat Transfer within Resonant Cavities at Subsonic and Supersonic Mach Numbers,” ASME Paper 71-FE-9, 1971.