Post-Failure Analysis of Bolted Composite Joints in Tension or Shear-Out Mode Failure

Journal of Composite Materials

Volumn 21, Issue 9, 1987, Pages 809-833

  Chang, Fu Kuo ^a   Chang, Kuo Yen ^a  

^a STANFORD UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

JOINTS - STRESSES; MATHEMATICAL TECHNIQUES - FINITE ELEMENT METHOD;

ARBITARY PLY ORIENTATIONS; PROGRESSIVE DAMAGE MODEL; PROPERTY DEGRADATION MODEL;

COMPOSITE STRUCTURES;

EID: 0023416432     PISSN: 00219983     EISSN: 1530793x     Source Type: Journal    
DOI: 10.1177/002199838702100903     Document Type: Article

References (38)

1. Waszczak, J.P. and T.A. Cruse. “Failure Mode and Strength Predictions of Anisotropic Bolt Bearing Specimens,” J. of Composite Materials, 5:421–425 ( 1971).
2. Oplinger, D.W. and D.R. Gandhi. “Stresses in Mechanically Fastened Orthotropic Laminates,” Proceedings of the 2nd Conf on Fibrous Composites in Flight Vehicle Design, pp. 813-834 (1974).
3. Oplinger, D.W. and D.R. Gandhi. ‘Analytical Studies of Structural Performance in Mechanically Fastened Fiber-Reinforced Plates,” Proceedings of the Army Symposium on Solid Mechanics, 1974: The Role of Mechanics in Design-Structural Joints, Army Materials and Mechanics Research Center AMMRC MS 74-8, pp. 211-242 (1974)
4. Agarwal, B.L. “Static Strength Prediction of Bolted Joint in Composite Material,” AIAA Journal, 18:1345–1375 ( 1980).
5. Soni, S.R. “Failure Analysis of Composite Laminates with a Fastener Hole,” Joining of Composite Materials,ASTM STP 740, ed. K. T. Kedward, Am. Soc. for Testing and Materials, pp. 145–164 ( 1981).
6. Garbo, S.P. and J.M. Ogonowski. “Effect of Variances and Manufacturing Tolerances on the Design Strength and Life of Mechanically Fastened Composite Joints,” Flight Dynamics Laboratory Air Force Wright Aeronautical Laboratories, Tech. Report AFWAL-TR-81-3041 ( 1981).
7. York, J.L., D.W. Wilson and R.B. Pipes. ‘Analysis of Tension Failure Mode in Composite Bolted Joints,” J. of Reinforced Plastics and Composites, 1:141–153 ( 1982)
8. Wilson, D.W. and R.B. Pipes. ‘Analysis of the Shearout Failure Mode in Composite Bolted Joints,” Proceedings of the 1st International Conf on Composite Structures Paisley College of Technology, Scotland, pp. 34–49 ( 1981).
9. Collings, T.A. “On the Bearing Strengths of CFRP Laminates,” Composites, 13:242–252 ( 1982).
10. Chang, F.K., R.A. Scott and G.S. Springer. “Strength of Mechanically Fastened Composite Joints,” J. of Composite Materials, 16:470–493 ( 1982)
11. Chang, F.K., R.A. Scott and G.S. Springer. “Strength of Mechanically Fastened Composite Joints,” Air Force Wright Aeronautical Laboratories, Tech. Report AFWAL-TR-82-4095 (July 1982).
12. Chang, F.K., R.A. Scott and G.S. Springer. “Strength of Bolted Joints in Laminated Composites,” Air Force Wright Aeronautical Laboratories, Tech. Report AFWAL-TR-84-4029 (1984).
13. Chang, F.K., R.A. Scott and G.S. Springer. “Failure of Composite Laminates Containing Pin Loaded Holes-Method of Solution,” J. of Composite Materials, 18:255–278 ( 1984).
14. Chang, F.K., R.A. Scott and G.S. Springer. “Design of Composite Laminates Containing Pin Loaded Holes,” J. of Composite Materials, 18:279–289 ( 1984).
15. Chang, F.K., R.A. Scott and G.S. Springer. “Failure Strength of Nonlinearly Elastic Composite Laminates Containing a Pin Loaded Hole,” J. of Composite Materials, 18:464–477 ( 1984).
16. Chang, F.K., R.A. Scott and G.S. Springer. “Bolted Joints in Laminated Composites,” 25th Structures Structural Dynamics and Materials Conf., Palm Springs, CA, pp. 252–256 (May 14-16, 1984).
17. Chang, F.K., R.A. Scott and G.S. Springer. “Design of Bolted Composite Joints,” 28th National SAMPE Symposium, pp. 164-175 (April 1983).
18. Stockdale, J.H. and F.L. Matthews. “The Effect of Clamping Pressure on Bolt Bearing Loads in Glass Fiber Reinforced Plastics,” Composites, 7:34–38 ( 1976).
19. Godwin, E.W., F.L. Matthews and P.F. Kilty. “Strength of Multi-Bolt Joints in GRP,” Composites, 13:268–272 ( 1982).
20. Matthews, F.L., C.M. Wong and S. Chryssafitis. “Stress Distribution Around a Single Bolt in Fiber-Reinforced Plastic,” Composites, 13:316–321 ( 1982).
21. Crews, J.H., Jr. “Bolt-Bearing Fatigue of a Graphite/Epoxy Laminate,” Joining of Composite Materials,ASTM STP 749, pp. 131–144.
22. Chang, F.K. and K.Y. Chang. “A Progressive Damage Model for Laminated Composites Containing Stress Concentrations,” J. of Composite Materials (this issue).
23. Fung, Y.C. Foundation of Solid Mechanics Englewood Cliffs, NJ: Prentice-Hall ( 1965).
24. Bathe, Klaus-Jurgen, Ekkehard Ramm and Edward L. Wilson. “Finite Element Formulations for Large Deformation Dynamics Analysis” International J. for Numerical Methods in Engineering, 9:383–386 ( 1975)
25. Zienkiewicz, O.C. The Finite Element Method New York: McGraw-Hill ( 1977).
26. Hahn, H.T. and S.W. Tsai. “Nonlinear Elastic Behavior of Unidirectional Composite Laminate,” J. of Composite Materials, 7:102–110 ( 1973).
27. Sandhu, R.S. “Nonlinear Response of Unidirectional and Angle-Ply Laminates,” AIAA Paper No. 74-380 presented at 15th AIAA-ASME Structural Dynamics and Materials Conference, Las Vegas, Nevada (1974 ).
28. Amijima, S. and T. Adachi. “Nonlinear Stress-Strain Response of Laminated Composites,” J. of Composite Materials, 13:206–218 ( 1979).
29. Chang, F.K. “The Effect of Pin Load Distribution on the Strength of Pin Loaded Holes in Laminated Composites,” J. of Composite Materials, 20:401–408 ( 1986).
30. Chang, F.K. and W.H. Chen. “In Situ Shear Strength Distribution in Laminated Composites,” J. of Composite Materials (to be published).
31. Yamada, S.E. and C.T. Sun. ‘Analysis of Laminate Strength and its Distribution,” J. of Composite Materials, 12:275–284 ( 1978).
32. Hashin, Z. “Failure Criteria for Unidirectional Fiber Composites,” J. Applied Mechanics, 47:329–334 ( 1980)
33. Rosen, B.W. “Mechanics of Composite Strengthening,” Fiber Composite Materials, Chapter 3 American Society for Metals ( 1965).
34. Tsai, S.W. and H.T. Hahn. Introduction to Composite Materials Technomic Publishing Company ( 1980).
35. Chang, F.K. and K.Y. Chang. “Damage Tolerance of Notched Laminated Composites Subjected Tensile Loading,” Journal of Composite Materials (submitted).
36. De Jong, T. “Stress Around Pin-Loaded Holes in Elastically Orthotropic or Isotropic Plates,” J. Composite Materials, 11:313–331 ( 1977).
37. Whitney, J.M. and R.J. Nuismer. “Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations,” J. Composite Materials, 8:253–265 ( 1974).
38. Lekhnitskil. Anisotropic Plates. Trans. S. W. Tsai and T. Cheron. New York: Gordon and Breach Science ( 1968).