Fluid mechanics of internal combustion engines—a review

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

Volumn 201, Issue 1, 1987, Pages 57-74

  Arcoumanis, C ^a   Whitelaw, J H ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER AIDED ANALYSIS; FLUID MECHANICS;

EXPERIMENTAL DATA; FLOW PROCESSES; FOUR-STROKE CYCLE;

INTERNAL COMBUSTION ENGINES;

EID: 0023208265     PISSN: 09544062     EISSN: 20412983     Source Type: Journal    
DOI: 10.1243/PIME_PROC_1987_201_087_02     Document Type: Article

References (105)

1. Clerk D. Cylinder actions in gas and gasoline engines. SAE J., 1921, 8, 523.
2. Ricardo H. R. Combustion in diesel engines. Proc. Instn Auto. Engrs, 1930, 24, 645.
3. Alcock J. F. Air swirl in oil engines. Proc. Instn Mech. Engrs, 1934, 123.
4. Lee D. W. A study of air flow in an engine cylinder. NACA report 653, 1939.
5. Rothrock A. M., Spencer R. C. The influence of directed air flow on combustion in a spark ignition engine. NACA report 657, 1939.
6. Semenov E. S. Studies of turbulent gas flow in piston engines. NASA technical translation 597, 1963.
7. Lancaster D. R. Effects of engine variables on turbulence in a spark-ignition engine. SAE paper 760159, 1976.
8. Witze P. O., Martin J. K. Cyclic-variation bias in spark ignition engine turbulence measurements. Proceedings of Second International Symposium on Applications of laser anemometry to fluid mechanics, Lisbon, July 1984.
9. Rask R. B. Laser Doppler anemometer measurements of mean velocity and turbulence in internal combustion engines. General Motors report 4839, 1984.
10. Morse A. P. The effect of crank-angle broadening on laser Doppler measurements in reciprocating engines. Report FS/77/8, Mechanical Engineering Department, Imperial College, London, 1977.
11. Arcoumanis C., Bicen A. F., Whitelaw J. H. et al. Application of LDA to four-stroke motored model engines. In Laser anemometry in fluid mechanics (Adrian R.), 1984 (Ladoan, Lisbon).
12. Liou T. M., Hall M., Santavicca D. A., Bracco F. V. Laser Doppler velocimetry measurements in valved and ported engines. SAE paper 840375, 1984.
13. Rask R. B. Comparison of window smoothed-ensemble, and cycle-by-cycle data reduction techniques for laser Doppler anemometer measurements of in-cylinder velocity. Proceedings of symposium on Fluid mechanics of combustion systems, Colorado, June 1981 (ASME, New York).
14. Cole J. B., Swords M. D. An investigation of the ignition process in a lean-burning engine using conditionally sampled laser-Doppler anemometry. SAE paper 800043, 1980.
15. Swords M. D., Kalghatgi G. T., Watts A. J. An experimental study of ignition and flame development in a spark ignition engine. SAE paper 821220, 1982.
16. Martin J. K., Witze P. O., Borgnakke C. Multiparameter conditionally sampled laser velocimetry measurements during flame propagation in a spark ignition engine. Proceedings of Twentieth Symposium on Combustion, Michigan, 1984; Sandia report 84–8224.
17. Amann C. A. Classical combustion diagnostics for engine research. SAE paper 850395, 1985.
18. Dyer T. M. New experimental techniques for in-cylinder engine studies. SAE paper 850396, 1985.
19. Cole J. B., Swords M. D. Measurement of concentration fluctuations in an internal combustion engine. J. Phys. D: Appl. Phys., 1980, 13, 733.
20. Arcoumanis C., Green H. G., Whitelaw J. H. The application of laser Rayleigh scattering to a reciprocating model engine. SAE Trans., 1984, 93, SAE paper 840376.
21. Johnston S. C. Precombustion fuel/air distribution in a stratified charge engine using laser Raman spectroscopy. SAE paper 790433, 1979.
22. Lakshminarayan P. A., Dent J. C. Interferometric studies of vaporising and combusting sprays. SAE paper 830244, 1983.
23. Rajan S., Smith J. R., Rambach G. D. Internal structure of a turbulent premixed flame using Rayleigh scattering. Combust. Flame, 1984, 57, 95.
24. Loye Zur A. O., Bracco F. V., Santavicca D. A. Preliminary study of flame structure in an internal combustion engine using 2-D flow visualisation. Proceedings Symposium on Diagnostics and modelling of combustion in reciprocating engines, Tokyo, 1985.
25. Eckbreth A., Stufflebeam J. Considerations for the application of CARS to turbulent reacting flows: A review. Expl. Fluids, 1985, 3(6), 301.
26. Bracco F. V. Modelling of engine sprays. SAE paper 850394, 1985.
27. Bachalo W. D., Houser M. J. Phase/Doppler spray analyser for simultaneous measurements of drop size and velocity distributions. Opt. Engr, 1984, 23(5), 583.
28. Blumberg P. N., Lavoie G. A., Tabaczynski R. J. Phenomenological models for reciprocating internal combustion engines. Prog. Energy Combust. Sci., 1979, 5, 123.
29. Reynolds W. C. Modelling of fluid motions in engines: An introductory overview. In Combustion modelling in reciprocating engines (Mattavi J. N., Amann C. A.), 1980, p. 69 (Plenum Press, New York).
30. Johns R. J. R. Multidimensional modelling of engine processes: progress and prospects. Proceedings of Fifteenth CIMAC Conference, 1983.
31. Gosman A. D. Multidimensional modelling of cold flows and turbulence in reciprocating engines. SAE paper 850344, 1985.
32. Gosman A. D. Flow processes in cylinders. In Thermodynamics and gas dynamics of internal combustion engines, (Horlock J. H., Winterbone D.), Vol. 2, 1986 (Oxford University Press).
33. Ahmadi-Befrui B., Gosman A. D., Watkins A. P. Prediction of in-cylinder flow and turbulence with three versions of k - ɛ turbulence model and comparison with data. Proceedings of Symposium on Flows in internal combustion engines —II, 1984, ASME-FED-20, p. 27.
34. Tahry S. H. Application of a Reynolds stress model to engine flow calculations. Proceedings Symposium on Flows in internal combustion engines —II, 1984, ASME-FED-20, p. 39.
35. Yule A. J., Mo S. L., Tham S. Y., Aval S. M. Diesel spray structure. Proceedings of ICLASS-85, London, 1985.
36. Gosman A. D., Johns R. J. R. Computer analysis of fuel-air mixing in direct-injection engines. SAE paper 800091, 1980.
37. Abraham J., Williams F. A., Bracco F. V. A discussion of turbulent flame structure in premixed charges. SAE paper 850345, 1985.
38. Gosman A. D. Aspects of the simulation of combustion in reciprocating engines. Proceedings of Symposium on Numerical simulation of combustion phenomena, France, 1985, Lecture Notes in Physics, Vol. 241 (Springer-Verlag, Berlin).
39. Hakberg B., Gosman A. D. Analytical determination of turbulent flame speed from combustion models. Proceedings of Twentieth International Symposium on Combustion, Michigan, 1984.
40. Libby P. A. Theory of normal premixed turbulent flames revisited. Prog. Energy Combust. Sci., 1985, 11, 83.
41. Tabaczynski R. J. Effects of inlet and exhaust system design on engine performance. SAE paper 821577, 1982.
42. Watson N. Lecture notes on turbocharging, September 1984, Imperial College, London.
43. Benson R. S., Whitehouse N. D. Internal combustion engines, Vol. 2, 1983 (Pergamon Press, Oxford).
44. Monaghan M. L., Pettifer H. F. Air motion and its effect on diesel performance and emissions. SAE paper 810255, 1981.
45. Morse A. P., Whitelaw J. H., Yianneskis M. The influence of swirl on the flow characteristics of a reciprocating piston cylinder assembly. J. Fluids Engng, 1980, 102, 478.
46. Witze P. O. Influence of air motion variation in the performance of a direct-injection stratified-charge engine. Proceedings of International Conference on Stratified charge automotive engines, 1980 (Mechanical Engineering Publications, London).
47. Uzkan T., Borgnakke C., Morel T. Characterisation of flow produced by a high-swirl inlet port. SAE paper 830266, 1983.
48. Tindal M. J., Williams T. J., Aldoory M. The effect of inlet port design on cylinder gas motion in direct injection diesel engines. Proceedings of Symposium on Flows in internal combustion engines (Ed. Uzkan T.), 1982 (ASME, New York).
49. Brandl F., Reverencic I., Cartellieri W., Dent J. C. Turbulent air flow in the combustion bowl of a DI diesel engine and its effect on engine performance, SAE paper 790040, 1979.
50. Kastner L. S., Williams T. J., White J. B. Poppet inlet valve characteristics and their influence on the induction process. Proc. Instn Mech. Engrs, 1963–4, 178, 955.
51. Annand W. J. D., Roe G. E. Gas flow in the internal combustion engine, 1974 (G. T. Foulis and Company Limited, Sparkford, Yeovil, Somerset).
52. Bicen A. F., Vafidis C., Whitelaw J. H. Steady and unsteady air flow through an intake valve of a reciprocating engine. J. Fluids Engng, 1985, 107, 413.
53. Fukutani I., Watanabe E. Air flow through poppet inlet valves—analysis of static and dynamic flow coefficients. SAE paper 820154, 1982.
54. Arcoumanis C., Vafidis C., Whitelaw J. H. Valve and in-cylinder flow generated by a helical port in a production diesel engine. Proceedings of Symposium on Flows in reciprocating IC engines, ASME-FED-28, 1985.
55. Brandstatter W., Johns R. J. R., Wigley G. The effect of inlet port geometry on in-cylinder flow structure. SAE paper 850499, 1985.
56. Arcoumanis C., Bicen A. F., Vlachos N. S., Whitelaw J. H. Effects of flow and geometry boundary conditions on fluid motion in a motored IC model engine. Proc. Instn Mech. Engrs, 1982, 196, 4.
57. Ekchian A., Hoult D. P. Flow visualisation study of the intake process of an internal combustion engine. SAE paper 790095, 1979.
58. Tabaczynski R. J. Turbulence measurements and modelling in reciprocating engines—an overview. Proceedings of International Conference on Combustion in engineering, Vol. 1, 1983, paper C51/83 (Mechanical Engineering Publications, London).
59. Kajiyama K., Nishida K., Murahami A., Arai M., Hiroyasu H. An analysis of swirling flow in cylinder for predicting DI diesel engine performance. SAE paper 840518, 1984.
60. Davis G. C., Kent J. C. Comparison of model calculations and experimental measurements of the bulk cylinder flow processes in a motored PROCO engine. SAE paper 790290, 1979.
61. Arcoumanis C., Bicen A. F., Whitelaw J. H. Measurements in a motored four-stroke reciprocating model engine. J. Fluids Engng, 1982, 104, 235.
62. Befrui Ahmadi B. Analysis of flow evolution in the cylinders of motored reciprocating engines. PhD thesis, 1985, University of London.
63. Vafidis C. Influence of induction swirl and piston configuration on air flow in a four-stroke model engine. Proc. Instn Mech. Engrs, Part C, 1984, 198C, 71.
64. Hirotomi T., Nagayama I., Kobayashi S., Yamamasu M. Study of induction swirl in a spark ignition engine. SAE paper 810496, 1981.
65. Daneshyar H., Fuller D. E., Deckker B. E. L. Vortex motion induced by the piston of an internal combustion engine. Int. J. Mech. Sci., 1973, 15, 381.
66. Sproston J., Woods W. A., Shams S. U. M. Experiments on the roll-up vortex with outflow and swirl. Proceedings of Symposium on Flows in internal combustion engines (Ed. Uzkan T.), Vol. II, 1984 (ASME, New York).
67. Namazian M., Hansen S., Lyford-Pike E., Sancher-Barsse J., Heywood J., Rife J. Schlieren visualization of the flow and density fields in the cylinder of a spark-ignition engine. SAE paper 800044, 1980.
68. Witze P. O., Martin J. K., Borgnakke C. Measurements and predictions of the precombustion fluid motion and combustion rates in a spark ignition engine. SAE paper 831697, 1983.
69. Hanson R. J., Thomas A. Flame development in swirling flows in closed vessels. Combust. Flame, 1984, 55, 255.
70. Gosman A. D., Tsui Y. Y., Vafidis C. Flow in a model engine with shrouded valve—a combined experimental and computational study. SAE paper 850498, 1985.
71. Arcoumanis C., Bicen A. F., Vafidis C., Whitelaw J. H. Three-dimensional flow field in four-stroke model engines. SAE paper 841360, 1984.
72. Hayder M. E., Varna A. K., Bracco F. V. A limit to TDC turbulence intensity in internal combustion engines. AIAA J., Propul. Pwr, 1985, 1(4), 300–308.
73. Arcoumanis C., Bicen A. F., Whitelaw J. H. Effects of inlet parameters on the flow characteristics in a four-stroke model engine. SAE paper 820750, 1982.
74. Coghe A., Ferrari G., Agostoni G., Brioschi C., Brunello G., Calderini F., Guarneri C., Volpi A. Velocity measurements on the motored single cylinder Fiat engine. CNPM report NT-8053, 1980.
75. Bracco F. V. Modelling and diagnostics of combustion in sparkignition engines. Proceedings of Symposium on Diagnostics and modelling of combustion in reciprocating engines, Tokyo, 1985.
76. Rask R. B., Saxena V. Influence of geometry on flow in the combustion chamber of a direct-injection diesel engine. General Motors report 4995, 1985.
77. Fansler T. D. Laser-velocimetry measurements of swirl and squish flows in an engine with a cylindrical piston bowl. SAE paper 850124, 1985.
78. Arcoumanis C., Bicen A. F., Whitelaw J. H. Squish and swirl-squish interaction in motored model engines. J. Fluids Engng, 1983, 105, 105.
79. Ball W. F., Pettifer H. F., Waterhouse C. N. F. Laser Doppler velocimeter measurements of turbulence in a direct-injection diesel combustion chamber. Proceedings of International Conference on Combustion in engineering, Vol. 1, 1983, paper C52/83 (Mechanical Engineering Publications, London).
80. Vafidis C. Aerodynamics of reciprocating engines. PhD thesis, 1985, University of London.
81. Peters B. D. Fuel droplets inside the cylinder of a spark ignition engine with axial stratification. SAE paper 820132, 1982.
82. Sato G. T. Structure of diesel sprays. Proceedings of ICLASS-85, London, 1985.
83. Beshay K. R. Computer modelling of diesel spray dispersion and evaporation. PhD thesis, 1985, University of London.
84. Arai M., Tabata M., Hiroyasu H., Shimizu M. Disintegrating process and spray characterisation of fuel jet injected by a diesel nozzle. SAE paper 840275, 1984.
85. De Soote G. C. Propagation behaviour of spark ignited flames in early stages. Proceedings of International Conference on Combustion in engineering, Vol. 1, 1983, paper C59/83 (Mechanical Engineering Publications, London).
86. Patterson D. J. Cylinder pressure variations, a fundamental combustion problem. SAE paper 660129, 1966.
87. Smith J. R. Turbulent flame structure in homogeneous-charge engine. SAE paper 820043, 1982.
88. Tabaczynski R. J., Turbulence and turbulent combustion in spark-ignition engines. Prog. Energy Combust. Sci., 1976, 2, 143.
89. Lancaster D. R., Krieger R. B., Sorenson S. C., Hull W. L. Effects of turbulence on spark-ignition engine combustion. SAE paper 760160, 1976.
90. Beretta G. P., Rashidi M., Keck J. C. Turbulent flame propagation and combustion in spark ignition engines. Combust. Flame, 1982, 51, 217.
91. Groff E. G., Matekunas F. A. The nature of turbulent flame propagation in a homogeneous spark-ignited engine. SAE paper 800133, 1980.
92. Abdel-Gayed R. G., Al-Khishali K. J., Bradley D. Turbulent burning velocities and flame straining in explosions. Proc. R. Soc. Lond., 1984, A391, 393.
93. Witze P. O., Martin J. K., Borgnakke C. Fluid motion during flame propagation in a spark ignition engine. SAE paper 840377, 1984.
94. Bray K. N. C., Libby P. A., Masuya G. M., Moss J. B. Turbulence production in premixed turbulent flames. Combust. Sci. Technol., 1981, 25, 127.
95. Winsor R. E., Patterson D. J. Mixture turbulence—a key to cyclic combustion variation. SAE paper 730086, 1973.
96. Hayashi T., Taki M., Kojima S., Kondo T. Photographic observation of knock with a rapid compression and expansion machine. SAE paper 841336, 1984.
97. Witze P. O. The effect of spark location on combustion in a variable-swirl engine. SAE paper 820044, 1982.
98. Harrington D. L. Interactions of direct injection fuel sprays with in-cylinder air motions. SAE paper 831728, 1983.
99. Fisher G. L. Through-the-piston combustion photography on a direct-injection diesel engine. Ricardo Consulting Engineers report DP83/1367, 1983.
100. Dent J. C. Turbulent mixing rate—its effect on smoke and hydrocarbon emissions from diesel engines. SAE paper 800092, 1980.
101. Namazian M., Heywood J. B. Flow in the piston-cylinder-ring crevices of a spark-ignition engine: effect on hydrocarbon emissions, efficiency and power. SAE paper 820088, 1982.
102. Wigley G., Patterson A. C., Renshaw J. Swirl velocity measurements in a firing production diesel engine by laser anemometry. Proceedings of Symposium on Fluid mechanics of combustion systems, Colorado, June 1981 (ASME, New York).
103. Woods W. A., Khan S. R. An experimental study of flow through poppet valves. Proc. Instn Mech. Engrs, 1965–6, 180(3N).
104. Oldfield S. G., Watson N. Exhaust valve geometry and its effect on gas velocity and turbulence. SAE paper 830151, 1983.
105. Borman G. Reciprocating engine combustion research needs. SAE paper 850398, 1985.