Transfer Lubrication for High Temperatures: A Review

Journal of Tribology

Volumn 107, Issue 4, 1985, Pages 437-443

  Lancaster, J K ^a  

^a Royal Aircraft Establishment   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

LUBRICANTS - SOLID FILMS; TRIBOLOGY - REVIEWS;

FILM FAILURE; SELF-LUBRICATING COMPOUND; SOLID LUBRICANTS; WEAR OUT PROCESS;

LUBRICATION;

EID: 0021842072     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.3261106     Document Type: Article

References (59)

1. Toyama, K., et al., “Heat Insulated Turbo-Compound Engine,” SAEPaper 831345, 1983.
2. Vanshteyn, V. E., et al., “A Method of Applying a Solid Lubricant Coating,” Authors’ Cert. No. 150329, Bycull, Izobretonii, No. 18, 1962, p. 14.
3. Winer, W. O., “Molybdenum Disulphide as a Lubricant; A Review of the Fundamental Knowledge,” Wear, Vol. 10, 1967, pp. 422-452.
4. Campbell, W. E., “Solid Lubricants,” Chapter 10 in Boundary Lubrication. An Appraisal of World Literature, ASME, 1969, pp. 197-227.
5. Lansdown, A. R., “Molybdenum Disulphide Lubrication,” ESA Reports: CR402, 1974; CR 764, 1976; CR(P) 1045, 1978; ESA/trib/4, 1981; ESA/trib/7, 1983.
6. Lancaster, J. K., “Solid Lubricants,” in CRC Handbook of Lubrication, (Theory and Practice of Tribology), Vol. II, Theory & Design, CRC Press Inc., 1984, pp. 267-290.
7. Rakaszawski, J. F., and Parker, W. E., “Effect of Group II1A-V1A Elements and Their Oxides on Graphite Oxidation,” Carbon, Vol. 2, 1964, pp. 53-63.
8. Jamison, W. E., “Intercalated Dichalcogenide Solid Lubricants,” Proc. 3rd Int. Conf. on Solid Lubrication, ASLE SP-14, 1984, pp. 73-87.
9. Boes, D. J., “Unique Solid Lubricating Materials for High Temperature-Air Applicatons,” ASLE Trans., Vol. 10, 1967, pp. 19-27.
10. Hughes, R. I., and Daniel, S. G., “The Influence of an Intercalated Inorganic Salt on the Frictional Characteristics of Graphite,” Proc. 1963, Instn. Mech. Engrs. tub. & Wear Conv., I. Mech. E., Vol. 178, Part 3N, 1964, pp. 273-282.
11. Lancaster, J. K., “Additive Effects on the Friction and Wear of Graphitic Carbons,” Proc, 3rd Leeds-Lyon Symp. MEP Ltd., 1978, pp. 187-195.
12. Lancaster, J. K., “Stabilization of the Friction and Wear of NonGraphitic Carbons by Additives,” Proc. 2nd Int. Conf. on Solid Lubrication, ASLE SP-6, 1978, pp. 176-188.
13. Sliney, H. E., “Solid Lubricant Materials for High Temperatures-A Review,” Trib. Int., Vol. 15, 1982, pp. 303-315.
14. Evans, D. C., and Senior, G. S., “Self-Lubricating Materials for Plain Bearings,” Trib. Int., Vol. 15, 1982, pp. 243-248.
15. Tsuya, Y., “Microstructure of Wear, Friction and Solid Lubrication,” Tech. Rep. of Mech. Eng. Lab., Tokyo, No. 81, 1975.
16. Paxton, R. R., “Carbon, Graphite and Metal-Bonded Molybdenum Disulphide Solid Lubricant Bearings,” Trib. Int., Vol. 15, 1982, pp. 285-292.
17. Glacier Deva Bearings, PG 316/73/2.
18. Devine, M. J., Cerini, J. P., and Stallings, L., “Improving Frictional Behavior With Solid Film Lubricants,” Metals Eng. Quart., Vol. 7, 1967, pp. 33-43.
19. Van Wyk, J. W., “Ceramic Airframe Bearings,” ASLE Prep. 75AM-7A-3, 1975.
20. Kinner, G. H., and Lancaster, J. K., “Improvements in or Relating to Bearing Materials,” Brit. Pat. 1596279, 1981.
21. Lancaster, J. K., and Moorhouse, P., “Etched-Pocket, Dry-Bearing Materials,” Trib. Int., Vol. 18, 1985, pp. 139-148.
22. Moorhouse, P., Mortimer, B., and Kamo, R., “Solid Lubrication Studies for Adiabatic Diesel Engines,” SAE Paper 850508 in SAE SP-610, 1985.
23. Stevens, K. T., and Todd, M. J., “Parametric Study of Solid Composites as Ball-Bearing Cages,” Trib. Int., Vol. 15, 1982, pp. 293-302.
24. Sutor, P., and Gardos, M. N., “Solid Lubricated Turbine Bearings: Part II--Development of 316°C Composites for a Steel Counterface,” Proc. 3rd Int. Conf. on Solid Lubrication, ASLE SP-14, 1984, pp. 258-265.
25. Gardos, M. N., “Self-Lubricating Composites for Extreme Environment Applications,” Trib. Int., Vol. 15, 1982, pp. 273-283.
26. Anderson, W. J., “Extreme-Temperature Bearings,” Chapter 11 in Advanced Bearing Technology, NASA SP-38, 1964, pp. 309-370.
27. Bisson, E. E., “Non-Conventional Lubricants,” Chapter 8 in Advanced Bearing Technology, NASA SP-38, 1964, pp. 203-257.
28. Pinto, N. de G., Duda, J. L., Graham, E. E., and Klaus, E. E., “Insitu Formation of Solid Lubricating Films From Conventional Mineral Oil and Ester Base Lubricants,” Proc. 3rd Int. Conf. on Solid Lubrication, ASLE SP-14, 1984, pp. 98-104.
29. Tanaka, K., Private communication.
30. Mitchell, D. C., and Pratt, G. C., “Friction, Wear and Physical Properties of Some Filled-PTFE Bearing Materials,” Proc. Instn. Mech. Engrs. Lubrication & Wear Group Conf., 1957, pp. 416-23.
31. Pratt, G. C., “Recent Developments in Polytetrafluoroethylene-Based Dry Bearing Materials and Treatments,” Proc. Instn. Mech. Engrs. 5th Lubrication & Wear Group Conv., 1967, paper 16, pp. 132-143.
32. Pocock, G., and Cadman, P., “An Application of Differential Scanning Calorimetry and Electron Spectroscopy to PTFE-Metal Reactions of interest in Dry Bearing Technology,” Wear, Vol. 37, 1976, pp. 129-141.
33. Fusaro, R. L., “Lubrication and Failure Mechanisms of Molybdenum Disulphide Films, 2-Effect of Substrate Roughness,” NASA TP 1379, 1978.
34. Lancaster, J. K., “The Influence of Substrate Hardness on the Formation and Endurance of Molybdenum Disulphide Films,” Wear, Vol. 10, 1967, pp. 103-117.
35. Campbell, M. E., and Thompson, M. B., “Lubrication Handbook for Use in the Space Industry, Part A, Solid Lubricants,” NASA-CR 120490, 1972.
36. Lancaster, J. K., “Composites for Increased Wear Resistance: Current Achievements and Future Prospects,” Proc. NASA Conf. on Tribology in the 80’s, NASA Conf. Pub. 2300, 1984, pp. 333-355.
37. Devine, M. J., Lamson, E. R., and Bowen, J. H., “The Effect of the Chemical Composition of Metals on Solid Lubrication,” Am. Chem. Soc. Div. Pet. Chem., Vol. 8/2, 1963, C177.
38. 2 Powder Burnished on to Metal Substrates,” J. Vac. Sci. Tech., Vol. 13, 1976, pp. 684-692.
39. Barton, G. C., and Pepper, S. V., “Transfer of Molybdenum Disulphide to Various Metals,” NASA TP 1019, 1977.
40. Bisson, E. E., Johnson, R. L., and Anderson, W. J., “Friction and Lubrication with Solid Lubricants at Temperatures to 1000°F with Particular Reference to Graphite,” Proc. Instn. Mech. Engrs. Lubrication & Wear Conf., London 1957, pp. 348-391.
41. Johnston, R. R. M., and Moore, A. J. W., “The Burnishing of Molybdenum Disulphide on to Metal Surfaces,” Wear, Vol. 7, 1964, pp. 498-512.
42. Bramham, R. W., King, R. B., and Lancaster, J. K., “The Wear of PTFE-Containing Dry-Bearing Liners Contaminated by Fluids,” ASLE Trans., Vol. 24, 1981, pp. 479-489.
43. 2-Film Lubrication,” in Mechanisms of Solid Friction, Elsevier, 1964, pp. 87-101.
44. Haltner, A. J., and Oliver, C. S., “Friction Properties of Some Solid Lubricant Films Under High Load,” Am. Chem. Soc., J. Chem. Eng. Data, Vol. 6, 1961, pp. 128-130.
45. 2), Graphite and Antimonythioantimonate (Sb(SbS4)), Proc. 3rd Int. Conf. on Solid Lubrication, ASLE SP-14, 1984, pp. 88-97.
46. Harmer, R. S., and Pantano, C. G., “Synergistic Mechanisms of Solid Lubricants,” AFML-TR-77-227, 1977.
47. Lancaster, J. K., “Transitions in the Friction and Wear of Carbons and Graphites Sliding Against Themselves,” ASLE Trans., Vol. 18, 1975, pp. 187-201.
48. Lancaster, J. K., and Pritchard, J. R., “The Influence of Environment and Pressure on the Transition to Dusting Wear of Graphite,” J. Phys. D., Vol. 14, 1981, pp. 747-762.
49. Play, D. F., and Pruvost, B., “Comparative Dry Wear of PTFE Liner Bearing in Cylindrical and Spherical Geometry,” ASME Journal of Tribology, Vol. 106, 1984, pp. 185-193.
50. Godet, M., Play, D., and Berthe, D., “An Attempt to Provide a Unified Treatment of Tribology Through Load Carrying Capacity, Transport and Continuum Mechanics,” ASME Journal of Lubrication Technology, Vol. 102, 1980, pp. 153-164.
51. Lancaster, J. K., Play, D., Bramham, R. W., and Waghorne, R., “Effects of Amplitude of Oscillation on the Wear of Dry Bearings Containing PTFE,” ASME Journal of Lubrication Technology, Vol. 104, 1982, pp. 559-567.
52. Sliney, H. E., “Dynamics of Solid Lubrication as Observed by Optical Microscopy,” ASLE Preprint 76-LC-1B-4, 1976.
53. Fusaro, R. L., “A Comparison of the Lubricating Mechanisms of Graphite Fluoride and Molybdenum Disulphide Films,” Proc. 2nd. Int. Conf. Solid Lubrication, ASLE SP-6, 1978, pp. 59-78.
54. Play, D., and Godet, M., “Visualization of Chalk Wear,” Proc. 3rd Leeds-Lyon Symp., MEP Ltd., 1978, pp. 221-229.
55. 2 and Graphite Fluoride,” RAE TR 76026, 1976.
56. Lancaster, J. K., “Lubrication by Transferred Films of Solid Lubricants,” ASLE Trans., Vol. 8, 1965, pp. 146-155.
57. Peterson, M. B., and Johnson, R. L., “Friction Studies of Graphite and Mixtures of Graphite with Several Metallic Oxides and Salts at Temperatures to 1000°F,” NACA TN 3657, 1956.
58. Lancaster, J. K., “The Relationship Between the Wear of Carbon Brushes and Their Elastic Moduli,” Brit. J. Appl. Phys., Vol. 14, 1963, pp. 497-505.
59. Longson, B., “Lubrication of High Temperature Ceramic Materials,” Trib. Int., Vol. 16, 1983, pp. 221-225.