A survey of finite element analysis in orthopedic biomechanics: The first decade

Journal of Biomechanics

Volumn 16, Issue 6, 1983, Pages 385-409

  Huiskes, R ^a   Chao, E Y S ^b  

^a RADBOUD UNIVERSITY NIJMEGEN   (Netherlands)

^b MAYO CLINIC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BIOLOGICAL MATERIALS - BONE; MATHEMATICAL TECHNIQUES - FINITE ELEMENT METHOD;

BIOMECHANICS;

BIOMECHANICS; BONE; BONE STRESS; COMPUTER ANALYSIS; HUMAN; METHODOLOGY; NONBIOLOGICAL MODEL; PROSTHESIS; SHORT SURVEY;

BIOMECHANICS; BONE AND BONES; COMPARATIVE STUDY; FRACTURE FIXATION; HUMAN; JOINT PROSTHESIS; MODELS, BIOLOGICAL; ORTHOPEDICS; PROSTHESIS DESIGN; STRESS, MECHANICAL; SUPPORT, NON-U.S. GOV'T;

EID: 0020963921     PISSN: 00219290     EISSN: None     Source Type: Journal    
DOI: 10.1016/0021-9290(83)90072-6     Document Type: Article

References (112)

1. Perspectives in measurements and modeling of musceloskeletal dynamics
2. Principles and methods of solid biomechanics
3. The laws of bone architecture
4. Advanced theoretical and experimental techniques in cartilage research
5. Ueber die innere Architektuer der Knochen und ihre Bedeutung fuer die Frage vom Knochenwachstum
6. A new method to analyse the mechanical behaviour of skeletal parts
7. The development of a computational stress analysis of the femoral head
8. Stress transmission anomalies in femoral heads altered by aseptic necrosis
9. Some femoral head load transmission changes occurring with infarction and with normal growth
10. A nonlinear finite element analysis of some early collapse processes in femoral head osteonecrosis
11. A three-dimensional finite element analysis of the proximal third of the femur
12. A detailed comparison of experimental and theoretical stress analyses of a human femur
13. Three dimensional FEM calculation of elastic stress field in human femur
14. The relevance of stress computation in the femur with and without endoprostheses
15. On the mathematical analysis of stress in the human femur
16. Ueber die Berechnung der mechanischen Beanspruchung in Knochenstrukturen mittels fuer den Flugzeugbau entwickelter Rechenverfahren
17. Three dimensional stress analysis of the human femur
18. Stress analysis of human femur
19. Investigation of the stress state of a human tibia in torsion by finite element methods
20. Stresses in the human knee joint
21. Stresses in the normal pelvis
22. Quantification of bone stresses during remodeling
23. Stress-morphology relationships in trabecular bone of the patella
24. Correlations between stress and morphology in trabecular bone of the patella
25. Axisymmetric finite element analysis of the lateral tibial plateau
26. An extended structural analysis of long bones, application to the human tibia
27. A structural model for the mechanical behavior of trabecular bone
28. Analysis of stress distribution in natural and artificial knee joints on the femur side using the finite element method
29. Analysis of contact tension in the knee joint
30. Properties and an anisotropic model of cancellous bone from the proximal tibial epiphysis
31. Stress fields in the unplated and plated canine femur calculated from in vivo strain measurements
32. Biomechanical analysis of external fixation devices for the treatment of open bone fractures
33. Pin-bone interface stresses in the application of external fixation and traction devices
34. Biomechanical and mathematical investigations concerning stress protection of bone beneath internal fixation plates
35. Axisymmetric analysis of pin-bone interface stresses of external fixation devices
36. Intertrochanteric fracture fixation model using 3-D, non-linear finite element analysis
37. A three dimensional, finite element based, parametric study of an orthopaedic bone plate
38. Mathematical and experimental studies on the mechanics of plated transverse fractures
39. Mechanics of oblique fracture fixation using a finite element model
40. Evaluation of one-, two-, and three-dimensional finite element and experimental models of internal fixation plates
41. Stroji, crenstvi.
42. Finite element analysis of multi-axial strength experiments for compact bone
43. An inter-disciplinary approach to evaluate the effect of internal fixation plate on long bore remodeling
44. Finite element analysis of a medullary shaft implant
45. A stress analysis of the femoral stem in total hip prostheses
46. The effect of stem length and stem material on stresses in bone-prosthesis systems
47. The calculation of stresses in boneprosthesis structures
48. Stress distributions in the acetabular region-II. Effects of cement thickness and metal backing of the total hip acetabular component
49. The influence of design parameters on calcar stresses following femoral head arthroplasty
50. An analysis of femoral component stem design in total hip arthroplasty
51. The effect of femoral stem cross-sectional geometry on cement stresses in total hip reconstruction
52. An analysis of collar function and the use of titanium in femoral prostheses
53. Factors governing the mechanical behavior of the implant-porous coating-trabecular bone interface
54. Structural Analysis: Consideration in the design of the total hip prosthesis
55. Stresses in the pelvis fitted with Charnley and McKee-Farrar prostheses
56. Stresses following stem cement bond failure in femoral total hip implants
57. Analytical approach to the study of stresses in the femoral stem of total hip prostheses
58. Three dimensional stress analysis of the femoral stem of a total hip prosthesis
59. Some fundamental aspects of human joint replacement; Part III: Stress analyses of intramedullary fixation systems
60. The effect of interface loosening on the stress distribution in intramedullary fixated artificial joints
61. Finite element computer methods for design and fixation problems of orthopaedic implants
62. Stresses in the femoral head-neck region after surface replacement, a three-dimensional finite element analysis
63. An investigation of the effect of cement thickness on an implant by finite element stress analysis
64. Calcar loading by titanium total hip stems
65. Finite element studies in hip reconstruction
66. Three-dimensional finite element analysis of the pelvis and ceramic acetabulum
67. An axisymmetric model of acetabular components in total hip arthroplasty
68. Der Kraftfluss bei Huftendoprothesen
69. Aussagewert und Grenzen der Spannungsberechnung mit der Finiten-Element-Methode (FEM) bei orthopädischen Problemen
70. Analysis of stress distribution in natural and artificial hip joints using finite-element method
71. On the structural safety of ceramic hip-joints heads
72. Failure prediction of the total hip prosthesis system
73. Theoretical and experimental studies of femoral stresses following surface replacement hip arthroplasty
74. Stress changes in bone secondary to the use of a femoral canal plug with cemented hip replacement
75. Stress analysis of human femur with implanted Charnley prosthesis
76. Finite element analysis of a simulated total hip replacement
77. Predictions of cement-bone failure criteria: three-dimensional finite element models versus clinical reality of total hip replacement
78. Finite element analysis of total hip prosthesis
79. Stress distributions in the acetabular region-I. Before and after total joint replacement
80. Effects of cortical bone anisotropy on prosthesis stem stresses
81. Biomechanics of the femoral component of total hip prostheses with particular reference to the stress in the bone-cement
82. Dependence of stem stress in total hip replacement on prosthesis and cement stresses
83. Analysis of model variables and fixation post length effects on stresses around a prosthesis in the proximal tibia
84. Performance of the tibial component in total knee replacement
85. Mechanical loosening of knee-endoprostheses with intermedullary stems: Influence of dynamic loading
86. Mechanics of bioceramic endoprostheses using conical cone fixation without bone cement, 1980
87. Stress analysis of the geometric knee under static loading
88. Quasi two-dimensional FEM analysis and experimental investigations of the tibial part of knee endoprostheses with intramedullary stems
89. Theoretical modeling and design of implant systems
90. The effect of a fibrous tissue liner between bone and cement on finite element models of bone-prosthesis structures
91. Optimal stem design in tumor prostheses
92. A three dimensional stress analysis of a new finger-joint prosthesis fixation system
93. Analytical methods in prosthesis design
94. A comparative evaluation of tibial component designs of total knee prostheses
95. An analysis of tibial component design in total knee arthroplasty
96. Stress analysis of a Freeman-Swanson knee prosthesis
97. Stress analysis in artificial knee joints with fixed and movable axis using the finite element method
98. The effect of geometry of PMMA-bone composite on stresses in a prosthetically resurfaced proximal tibia
99. Parametric FE studies of tibial component fixation in the total condylar knee prosthesis
100. Finite element stress analysis of an intervertebral disc
101. Some fundamental aspects of human joint replacement. Section II: Heat generation and conduction analyses of acrylic bone cement in situ
102. Thermal injury of cancellous bone, following pressurized penetration of acrylic cement
103. Nonlinear behavior of the human intervertebral disc under axial load
104. Systems identification for material properties of the intervertebral joint
105. Finite element analysis of contact problems for identation of articular cartilage
106. Effects on cartilage stiffness and viscosity on an nonporous compliant bearing lubrication model for living joints
107. Mechanical behavior of a simple model of an intervertebral disk under compressive loading
108. An electro-mechanical model for human articular cartilage
109. Finite element temperature analysis of a total hip replacement and measurement of PMMA curing temperatures