Interpretation of cone penetrometer data for offshore sands

Proceedings of the Annual Offshore Technology Conference

Volumn 1983-May, Issue , 1983, Pages 181-192

  Lunne, Tom ^a   Christoffersen, H P ^a  

^a NORWEGIAN GEOTECHNICAL INSTITUTE   (Norway)

Author keywords

[No Author keywords available]

Indexed keywords

OFFSHORE OIL WELL PRODUCTION; SAND; SOIL TESTING; MATERIALS TESTING - ANALYSIS; MATERIALS TESTING APPARATUS; OCEANOGRAPHY;

CONE PENETRATION TESTS; CONE PENETROMETERS; CONSTRAINED DEFORMATIONS; LABORATORY TESTING; SCALE CALIBRATION; SCHMERTMANN'S METHOD; SIMULTANEOUS SAMPLING; UNDISTURBED SAMPLE;

OFFSHORE TECHNOLOGY; SAND AND GRAVEL;

CONE PENETRATION TEST; CONE PENETROMETER; CONSTRAINED DEFORMATION MODULUS; DRAINED FRICTION ANGLE; RELATIVE DENSITY ESTIMATES;

EID: 0020905928     PISSN: 01603663     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.4043/4464-ms     Document Type: Conference Paper

References (31)

1. Parkin, A. K. and T. Lunne (1982) Boundary effects in the laboratory calibration of a cone penetrometer for sand. European Symposium on Penetration Testing, 2. Amsterdam 1982. Proceedings, Rotterdam, Balkema, Vol. 2, pp. 761-768.
2. Veismanis, A. (1975) Laboratory investigation of electrical frictioncone penetrometers in sand. European Symposium on Penetration Testing, 1. Stockholm 1974. Proceedings, Vol. 2:2, pp. 407-41
3. Chapman, G. A. (1979) The interpretation of friction cone penetrometer tests in sand. Ph. D. Thesis. Monash University, Australia. Department of Civil Engineering.
4. Schmertmann, J. H. (1976) An updated correlation between relative density, Dr and Fugro-type electric cone bearing qc. Waterways Experiment Station, Vicksburg, Miss. Contract report, DACW 39-76-M 6646. 145p.
5. Schmertmann, J. H. (1978) Guidelines for cone penetration test: performance and design. United States. Department of Transportation. Federal Highway Administration Offices of Researc and Development, Washington, D. C. Report, TS-78-209. 145p.
6. Bellotti, R., V. Ghionna, M. Jamiolkowski, M. E. Manassero and E. Pasqualini (1983) Evaluation of sand strength from CPT. To be presented at the International Symposium on Soil and Rock Investigations by In-Situ Testing. Paris, 18th-20th May, 1983.
7. Baldi, G., R. Bellotti, V. Ghionna, M. Jamiolkowski and E. Pasqualini (1982) Design parameters for sands from CPT. European Symposium on Penetration Testing, 2. Amsterdam 1982. Proceedings, Rotterdam. Balkema, Vol. 2, pp. 425-432.
8. Mitchell, J. K. and T. A. Lunne (1978) Cone resistance as measure of sand strength. American Society of Civil Engineers. Proceedings, Vol. 104, No. GT 7, pp. 995-1012. Also publ. in: Norwegian Geotechnical Institute. Publication, 123.
9. Meyerhof, G. G. (1961) The ultimate bearing capacity of wedge-shaped foundations. International Conference on Soil Mechanics and Foundation Engineering, 5. Paris. Proceedings, Vol. 2, pp. 105-109.
10. Janbu, N. and K. Senneset (1975) Effective stress interpretation of in situ static penetration tests. European Symposium on Penetration Testing. Stockholm 1974. Proceedings, Vol. 2. 2, pp. 181-19
11. Durgunoglu, H. T. and J. K. Mitchell (1975) Static penetration resistance of soils. I-II. American Society of Civil Engineers. Conference on In Situ Measurement of Soil Properties. Raleigh, North Carolina 1975. Proceedings, Vol. 1 pp. 151-189.
12. Schmertmann, J. H. (1982) A method for determining the friction angle in sands from the Marchetti dilatometer test (DMT). European Symposium on Penetrometer Testing, 2. Amsterdam 1982. Proceedings, Vol. 2, pp. 853-861.
13. Vesic, A. S. (1973) Analysis of ultimate loads of shallow foundations. American Society of Civil Engineers. Proceedings, Vol. 99, No. SM 1, pp. 45-73.
14. Aas, G. (1981) Setninger av bygg pa sand; bestemmelse av jordartsparametere for bruk av setningsberegninger. Norwegian Geotechnical Institute. Report, 52409-8. 27p.
15. Janbu, N. (1967) Settlement calculations based on the tangent modulus concept. Technical University of Norway. Soil Mechanics and Foundation Engineering, Trondheim. Bulletin, 2. 57p.
16. Senneset, K., N. Janbu and G. Svano (1982) Strength and deformation parameters from cone penetration tests. European Symposium on Penetration Testing, 2. Amsterdam 1982. Proceedings, Rotterdam, Balkema, Vol. 2, pp. 863-870.
17. Mitchell, J. K. and U. S. Gardner (1976) In situ measurement of volume change characteristics. American Society of Civil Engineers. Conference on In Situ Measurement of Soil Properties.
18. Campanella, R. G., D. Gillespie and P. K Robertson (1982) Pore pressure during penetration testing. European Symposium on Penetration Testing, 2. Amsterdam 1982. Proc, Rotterdam, Balkema, Vol. 2, pp. 507-512.
19. Kroezen, M. (1981) Measurement of in situ density in sandy/silty soils. Canadian Geotechnical Society. Newsletter, Vol. 18, No. 4, pp. 13-15.
20. Marchetti, S. (1981) In situ test by flat dilatometer; closure to discussion. American Society of Civil Engineers. Proceedings, Vol. 107, No. GT 6, pp. 832-837.
21. Douglas, B. J. and R. S. Olsen (1981) Soil classification using electric cone penetrometer. American Society of Civil Engineers. Cone penetration testing and experience; proceedings of a session at the ASCE National Convention. St. Louis, Mo. 1981, pp. 209-227.
22. Lunne, T. and A. Kleven (1981) Role of CPT in North Sea foundation engineering. American Society of Civil Engineers. Cone Penetration Testing and Experience; Proceedings of a Session at the ASCE National Convention, St. Louis, Mo. 1981, pp. 76-107. Also publ. in: Norwegian Geotechnical Institute. Publication, 139.
23. Parkin, A., J. Holden, K. Aamot, N. Last and T. Lunne (1980) Laboratory investigations of CPT's in sand. Norwegian Geotechnical Institute, Report, 52108-9. 31p.
24. Baldi, G., R. Bellotti, V. Ghionna, M. Jamiolkowsk and E. Pasqualini (1981) Cone resistance of a dry medium sand. International Conference on Soil Mechanics and Foundation Engineering, 10. Stockholm 1981. Procedings, Vol. 2, pp. 427-432.
25. Thomas, D. (1968) Deep sounding test results and the settlement of spread footings on normally consolidated sands. Geotechnique, Vol. 18, pp. 472-488.
26. Dahlberg, R. (1975) Settlement characteristics of preconsolidated natural sands. Swedish Council for Building Research, Stockholm. Document, D1:1975. 316p.
27. Muhs, H. (1975) On the relation of the bearing capacity factors, the modulus of elasticity and the cone resistance. European Symposium on Penetration Testing. Stockholm 1974. Proceedings, Vol. 2. 1, pp. 141-142.
28. Trofimenkov, J. G. (1974) Penetration testing in USSR. State-of-the-art report. European Symposium on Penetration Testing. Stockholm 1974. Proceedings, Vol. 1, pp. 147-154.
29. Webb, D. L. (1970) Settlement of structures on deep alluvial sandy sediments in Durban, South Africa. British Geotechnical Society. Conference on In Situ Investigations on Soils and Rocks, London 1969. Proceedings, pp. 181-188.
30. Villet, W. C. B. and J. K. Mitchell (1981) Cone resistance, relative density and friction angle. American Society of Civil Engineers. Cone penetration testing and experience; proceedings of a session at the ASCE National Convention. St. Louis, Mo., pp. 178-208.
31. Baldi, G., R. Bellotti, V. Ghionna, M. Jamiolkowski and E. Pasqualini (1981) Cone resistance in dry N. C and O. C sands. American Society of Civil Engineers. Cone penetration testing and experience; proceedings of a session at the ASCE National Convention. St. Louis, Mo., pp. 145-177.