Determination of saturated values of rotating machinery incremental and apparent inductances by an energy perturbation method

IEEE Transactions on Power Apparatus and Systems

Volumn PAS-101, Issue 12, 1982, Pages 4441-4451

  Nehl, T W ^a   Fouad, F A ^a   Demerdash, N A ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ELECTRIC FIELDS - ANALYSIS; MATHEMATICAL TECHNIQUES - FINITE ELEMENT METHOD;

APPARENT WINDING INDUCTANCE; INCREMENTAL WINDING INDUCTANCE; WINDING CURRENT PERTURBATIONS;

ELECTRIC WINDINGS, MACHINE;

EID: 0020266511     PISSN: 00189510     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPAS.1982.317296     Document Type: Article

References (24)

1. Delco Electronics, “Final Report on the Electromechanical Flight Control Actuator,” Final Report NASA-JSC Contract NO. NAS9-14952, General Motors Corporation, Delco Electronics Div., Santa Barbara Operations, Goleta, CA, 1978.
2. Sawyer, B., and Edge, J. T., “Design of a Samarium Cobalt Brushless DC Motor for Electromechanical Actuator Applications”, Proceedings, of the IEEE-National Aerospace and Electronics Conference, Dayton, Ohio, 1977.
3. Edge, J. T., “An Electromechanical Actuator Technology Development Program”, Paper NO. 780581, Society of Automotive Engineers, Proceedings of the Aerospace Fluid Power and Control Technologies Symposium, 1978.
4. Demerdash, N. A., and Nehl, T. W., “Dynamic Modeling of Brushless DC Motors for Aerospace Acutation”, IEEE Transactions on Aerospace and Electronic Systems, Vol. 16, No. 6, 1980, pp. 811–821.
5. Chari, M. V. K. and Silvester, P. “Analysis of Turbo Alternator Magnetic Field by Finite Elements”. IEEE Transactions on Power Apparatus and Systems, Vol. PAS-90, pp. 454–464, 1971.
6. Demerdash, N. A. and Hamilton, H. B., “Simulation for Design Purposes of Magnetic Fields in Turbogenerators with Symmetrical and Asymmetrical Rotors — Part I Model Development and Solution Technique, and Part II — Model Calibration and Applications”, IEEE Transactions on Power Apparatus and Systems, PAS, Vol. 91, 1972, pp. 1985–1999.
7. Fuchs, E. F. and Erdelyi, E. A., “Nonlinear Theory of Turboalternators Part II: Load Dependent Synchronous Reactances”, IEEE Trans. on Power Apparatus and Systems, PAS, Vol. 92, pp. 592–599, 1973.
8. Demerdash, N. A. and Hamilton, H. B., “A Simplified Approach to Determination of Saturated Synchronous Reactances of Large Turbogenerators Under Load”, IEEE Trans. on Power Apparatus and Systems, PAS, Vol. 95, pp. 560–569, 1976.
9. Chari, M. V. K., Csendes, Z. J., Minnich, S. H., Tandon, S. C. and Berkery, J., “Load Characteristics of Synchronous Generators by the Finite Element Method”, IEEE Transactions on Power Apparatus and Systems, Vol. PAS-100, 1981, pp. 1–13.
10. Concordia, C., “Synchronous Machines Theory and Performance,” John Wiley & Sons, Inc., New York, 1951.
11. Say, M. F., Alternating Current Machines, John Wiley and Sons, New York, 1976.
12. Nehl, T. W., Fouad, F. A., Demerdash, N. A., and Maslowski, E., “Dynamic Simulation of Radially Oriented Permanent Magnet Type Electronically Operated Synchronous Machines with Parameters Obtained from Finite Element Field Solutions”, Paper Accepted for Publication in the IEEE Transactions on Industry Applications, Presented at the 1980 IAS Meeting, Cincinnati, Ohio.
13. Brice, Carnahan, Luther, H. A. and Wilkes, J. O., “Applied Numerical Methods”, John Wiley & Sons, Inc., 1969.
14. Fouad, F.A., “Finite Element Analysis For Design of Classical and Electronically Operated Machines”, Ph.D. Dissertation, Electrical Engineering Department, Virginia Polytechnic Institute and State University, Blacksburg, VA, May 1981.
15. Nehl, T. W., “A Discrete Time Model of a Power Conditioner Fed Permanent Magnet Brushless DC Motor Systems for Aerospace and Electric Vehicle Applications for Design Purposes Using Finite Elements for Machine Parameter Determination”, Ph.D. Dissertation, Department of Electrical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, May 1980.
16. Fouad, F. A., Nehl, T. W., and Demerdash, N. A., “Magnetic Field Modeling of Permanent Magnet Type Electronically Operated Synchronous Machines Using Finite Elements”, IEEE Transactions on Power Apparatus and Systems, PAS-Vol. 100, 1981, pp. 4125–4135.
17. Fano, R. M., Chu, L. J. and Adler, R. B., “Electromagnetic Fields, Energy and Forces”, The MIT Press, 1968.
18. Hannalla, A. Y., “Analysis of Transient Field Problems in Electrical Machines Allowing for End Leakage and External Reactances”, IEEE Transactions on Magnetics, Vol. MAG-17, pp. 1240–1243, 1981.
19. Nagarkatti, A. K., “Study of Performance and Certain Special Aspects of Electronically Commutated Brushless D.C. Motor for Electric Vehicles”, M.S. Thesis, Department of Electrical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, May 1980.
20. Bozorth, Ferromagnetism, Van Nostrand, New York, 1951, pp 6, 539ff, 845ff.
21. Magnetic Circuits and Transformers, Staff, Electrical Engineering Department-MIT, MIT Press, 1965, p. 198.
22. S. H. Minnich, “Incremental Permeabilities for Transient Analysis of Large Generators by the Finite—Element Method,” J. Appl. Phys. 52 (3), March 1981, p. 2428.
23. T. W. Nehl, F. A. Fouad, N. A. Demerdash, “Digital Simulation of Power Conditioner-Machine Interaction for Electronically Commutated DC Permanent Magnet Machines,” IEEE Transactions on Magnetics, Vol. MAG-17, No. 5, 1981, pp. 3284–3286.
24. T. W. Nehl, F. A. Fouad, N. A. Demerdash and E. Maslowski, “Dynamic Simulation of Radially Oriented Permanent Magnet Type Electronically Operated Synchronous Machines with Parameters Obtained from Finite Element Field Solutions,” IEEE Transactions on Industry Applications, Vol. IA-18, Number 2, 1982, pp. 172–182.