The loss of tensile strength of hard-drawn conductors by annealing in service

IEEE Transactions on Power Apparatus and Systems

Volumn PAS-98, Issue 3, 1979, Pages 700-709

  Morgan, Vincent T ^a  

^a CSIRO   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

HEAT TREATMENT - ANNEALING; WIRE DRAWING - STRESSES;

ELECTRIC CONDUCTORS;

EID: 0018468041     PISSN: 00189510     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPAS.1979.319273     Document Type: Article

References (68)

1. D. O. Koval and R. Billinton, “Determination of transmission line ampacities by probability and numerical methods.” IEEE Trans. Power Apparatus and Systems, vol. PAS-89, pp. 1485–1492, September/October 1970.
2. T. Hunter and K. E. Voigt, “Application of computer to thermal rating of overhead conductors.” IEEE District Meeting, Toledo, Ohio, May 1963, Paper No. DP 63-783.
3. G. M. Beers, S. R. Gilligan, H. W. Lis and J. M. Schamberger, “Transmission conductor ratings.” IEEE Trans. Power Apparatus and Systems, vol. PAS 82, pp. 765–775, October 1963.
4. J. Endrenyi and N. J. McMurtrie, “Determination of conductor ampacity by digital simulation of load, weather and ageing history.” CIGRE, Paper 23-04, 1968.
5. M. W. Davis, “A new thermal rating approach: the Real Time Thermal Rating System for strategic overhead conductor transmission lines, Part I. General description and justification of the Real Time Thermal Rating System, Part II. Steady state thermal rating program.” IEEE Trans. Power Apparatus and Systems, vol. PAS-96, pp. 803–823, May/June 1977.
6. V. T. Morgan, “The current-carrying capacities of overhead line conductors.” (To be published.) IEEE Paper A 78 575-3
7. G. E. Luke, “Current capacity of wires and cables.” Elect. J., vol. 20, pp. 127–130, April 1923.
8. N. B. Pilling and G. P. Halliwell, “Softening of hard-rolled electrolytic copper.” Proc. Amer. Soc. Test. Mater., vol. 25, pp. 97–119, 1925.
9. A. von Zeerleder and M. Bosshard, “Neue Wege im Freileitungsbau.” Z. Metallkde, vol. 19, pp. 459–470, November 1927.
10. H. Bohner, “Zugfestigkeits — und Leitfähigkeitsanderung hartgezogener Drähte aus Kupfer, Bronze, Aluminum, Aludur und Aldrey unter dem Einfluss kurzzeitiger Erwärmung.” Z. Metallkde, vol. 20, pp. 132–141, 1928.
11. H. Moore, discussion on: A. von Zeerleder and P. Bourgeois, “Effect of temperatures attained in overhead electric transmission cables.” J. Inst. Metals, vol. 42, pp. 327–328, 1929.
12. F. Wöhr, “Die Einwirkung von Kurzschlossströmen auf die Festigkeit von Leitungsseilen aus Aluminum und Kupfer.” V.A.W. Hauszeitschrift, vol. 3, pp. 271–276, 1931.
13. A. von Zeerleder, M. Bosshard and R. Irmann, “Wärmfestigkeit und Warmharte verschriedener Aluminumlegierungen.” Z. Metallkde, vol. 25, pp. 293–299, December 1933.
14. M. Thomas, “Einige Betriebserfahrungen mit Aldreyleitungen.” Bull. Schweiz. Elektrotech. Ver., vol. 25, pp. 99–104, 1934.
15. F. M. Powell and D. A. Paul, “The properties of aluminum and two of its alloys at elevated temperatures.” Metals and Alloys, vol. 5, pp. 176–180, August 1934.
16. A. von Zeerleder and R. Irmann, “Mechanical Properties of aluminum and its alloys after prolonged heating.” J. Inst. Metals, vol. 59, pp. 111–127, 1936.
17. E. Voce, “The effects of prolonged heating at 80 C in copper wire.” J. Inst. Metals, vol. 67, pp. 1–9, 1941.
18. M. Zucker, “Thermal rating of overhead line wire.” AIEE Trans., vol. 62, pp. 501–507, July 1943.
19. AIEE Working Group, “Interim report on emergency overloads on overhead conductors.” AIEE Trans., vol. 62, pp. 588–590, September 1943.
20. M. Cook and T. L. Richards, “Observations on the rate and mechanism of recrystallization in copper.” J. Inst. Metals, vol. 73, pp. 1–31, 1946/1947.
21. A. F. Hickernell, A. A. Jones and C. J. Snyder, “Hy-therm copper — an improved overhead line conductor.” AIEE Trans., vol. 68, Pt I, pp. 22–30, 1949.
22. M. Vajta, “Self-annealing of overhead conductor materials under the continuous action of heat.” Acta Tech. Hungar., vol. 1, pp. 277–297, 1951.
23. A. A. Russell, “Effects of heating at 300 and 500 F on the properties of aluminum and copper wires.” Wire and Wire Products, vol. 27, pp. 255–256, March 1952.
24. Aluminum Wire and Cable Co. Ltd (Wales), “The effect of annealing at low temperatures on the strength of electrical purity aluminum and Silmalec wires.” Tech. Report No. 53/11, November 1953.
25. C. Blazey, “The softening of hard-drawn, high-conductivity copper wire in the temperature range 100–150 C.” J. Australian Inst. Metals, vol. 2, pp. 41–53, April 1957.
26. H. E. House and P. D. Tuttle, “Current-carrying capacity of ACSR.” AIEE Trans., vol. 77, Pt. 3, pp. 1169–1177, February 1959.
27. H. W. Adams, “Design of overhead lines with 5005 aluminum-alloy cables.” AIEE Trans., vol. 77, pp. 1290–1300, 1959.
28. G. Dassetto, “Einfluss von Wärme auf die Festigkeitseigenschaften von Freileitungsseilen.” Aluminium, vol. 34, pp. 716–718, December 1958; also “New operational experience with Aldrey conductors.” CIGRE, Paper No. 211, 1956.
29. E. W. Greenfield, “High-strength aluminum-alloy conductors.” AIEE Trans., vol. 78, pp. 1449–1455, December 1959.
30. K. Yamaji, K. Kakizaki and R. Yamanishi, “Various properties of AS-wire (aluminum-clad steel wire) developed by Hitachi Wire and Cable Co. Ltd.” Hitachi Review, vol. 11, pp. 27–38, 1962.
31. R. Kawanishi, Y. Yamaji, S. Shimobori and A. Tanaka, “High temperature characteristics of heat resistant aluminum-alloy conductors and of heat resistant conductors using aluminum clad steel (AS) wires,” Hitachi Review, vol. 13, pp. 46–48, 1964; also Hitachi Ltd. Report TD-80-566 November 1964.
32. J. Sproule, “Some notes on the thermal rating of transmission lines.” Electricity Commission of New South Wales, Sydney, Australia, Projects Division Internal Report, November 1964.
33. Furukawa Electric Co. Ltd., “Furukawa's thermal-resistant aluminum-alloy conductors.” Undated report.
34. H. Hashimoto, T. Imai and A. Tanaka, “Performance and application of AS wire manufactured by pressure welding.” IEEE Winter Power Meeting, New York City, 26–31 January 1969, Paper 69-CP26-PWR.
35. J. R. Harvey, “Effect of elevated temperature operation on the strength of aluminum conductors.” IEEE Trans. Power Apparatus and Systems, vol. PAS-91, pp. 1769–1772, September/October 1972.
36. H. Schmitt, “Über den Einfluss von Kurzschlussströmen auf die Festigkeit und Leitfestigkeit hartgezogener Drähte.” E.T.Z., vol. 49, pp. 684–687, May 1928.
37. L. F. Roehmann and E. Hazan, “Short-time annealing characteristics of electrical conductors.” AIEE Trans., vol. 82, Pt 3, pp. 1061–1068, December 1963.
38. A. Tanaka and F. Numajiri, “Short-circuit current carrying capacity of aluminum-clad steel wire.” Hitachi Review, Special Issue, No. 12, pp. 69–79, 1965.
39. A. Tanaka and H. Hoshino, “Transient current capacity of AS (aluminum clad steel) ground wires.” IEEE Trans. Power Apparatus and Systems, vol. PAS-89, pp. 1493–1498, September/October 1970.
40. M. Onuki, Y. Miyake and A. Tanaka, “Heat resistant aluminum alloys for bulk capacity overhead transmission line conductors.” Hitachi Hyoron, vol. 55, pp. 41–46, 1973.
41. F. J. Quey and R. Rols, “The possibilities and advantages offered by A-GS/L aluminum-alloy in the construction of overhead lines.” CIGRE, Paper 22-14, 1976.
42. A. E. Livingston, “Aluminum alloy conductors for overhead transmission and distribution lines.” Aluminum Laboratories Ltd, Montreal, Canada, 1965.
43. M. Thomas, “Quelques experiences d'exploitation de lignes en Aldrey.” CIGRE, Paper 45, 1933.
44. R. W. Cahn (editor), Physical Metallurgy. North-Holland, 1965.
45. S. Murphy and C. J. Ball, “The recrystallization of tough-pitch copper.” J. Inst. Metals, vol. 100, pp. 225–232, 1972.
46. P. C. Varley, discussion on reference 20, J. Inst. Metals, vol. 73, pp. 715–716, 1946/1947.
47. E. C. W. Perryman, “Observations on the structural changes accompanying recovery in super-purity aluminum.” Acta Metalurgica, vol. 2, pp. 26–33, 1954.
48. P. C. Varley, “The recovery and recrystallization of rolled aluminum of commercial purity,” J. Inst. Metals, vol. 75, pp. 185–202, 1948/1949.
49. E. C. W. Perryman, “Relationship between recovery and recrystallization in super-purity aluminum.” Trans. AIME, vol. 7, pp. 1053–1064, September 1955.
50. G. Mima, Y. Ogino and J. Sato, “Annealing spectrum of heavily drawn copper.” J. Inst. Metals, vol. 96, pp. 49–58, 1968.
51. P. H. Thornton and R. W. Cahn, “The recovery and recrystallization of copper and aluminum under stress.” J. Inst. Metals, vol. 89, pp. 455–463, 1960/1961.
52. M. Avrami, “The kinetics of phase change.” J. Chem. Phys., vol. 7, pp. 1103–1112, 1939; vol. 8, pp. 212–224, 1940; vol. 9, pp. 177–184, 1941.
53. N. Thorley, “The calculation of the activation energies of recovery and recrystallization from hardness measurements of copper.” J. Inst. Metals, vol. 77, pp. 141–161, 1950.
54. A. Krupkowski and M. Balicki, “Explanation of the theory of recrystallization of hardened metals, with copper as an example.” Ann. Acad. Sci. Tech. Varsovie, vol. 4, pp. 270–288, 1937; also M. Balicki, discussion to reference 20, J. Inst. Metals, vol. 73, pp. 705–715, 1946/1947.
55. K. Fabry, “Zmenšenie mechanickej pevnosti prípojníc skratovým otoplením.” Elektrotech. Obzor., vol. 56, pp. 420–425, 1967.
56. V. T. Morgan, “Rating of conductors for short-duration currents.” Proc. IEE (London), vol. 118, pp. 555–570, 1971.
57. V. T. Morgan, “Rating of bare overhead conductors for intermittent and cyclic currents.” Proc. IEE (London), vol. 116, pp. 1361–1376, 1969.
58. T. Takiri, Y. Takahashi, A. Tanaka and K. Oka, “Development of a thermo-telemeter for overhead transmission lines.” Hitachi Review, vol. 16, pp. 37–38, 1967.
59. R. Renchon and G. Daumerie, “Overhead line thermal image.” CIGRE, Paper 303, 1956.
60. J. C. Gorub and E. F. Wolfe, “Load capability of bare ACSR and all-aluminum conductors based on long-term outdoor temperature rise tests.” AIEE Trans. Power Apparatus and Systems, vol. PAS-82, pp. 852–857, 1963.
61. K. P. Ewelt, H. Kollewe and U. Stoll, “A thermal model for determination of temporary overhead line ampacity dependent on weather conditions.” CIGRE, Paper 22-04, 1970.
62. F. Numajiri, “A statistical approach to the design of transmission line conductors.” Elect. Engng. Japan, vol. 85, pp. 73–82, September 1965.
63. L. Paris, F. Reggiani and M. Valtorta, “Possibilities to increase transmission line loading in well-developed electric networks.” CIGRE, Paper 31-13, 1974.
64. R. Billinton and C. Singh, “System Load representation in generating capacity reliability studies, Part II; applications and extensions.” IEEE Trans. Power Apparatus and Systems, vol. PAS-91, pp. 2133–2141, September/October 1972.
65. J. Vardi, J. Zahavi and B. Avi-Itzhak, “The combined load duration curve and its derivation.” IEEE Trans. Power Apparatus and Systems, vol. PAS-96, pp. 978–983, May/June 1977.
66. H. W. Adams, “Steel supported aluminum conductors (SSAC) for overhead transmission lines.” IEEE Trans. Power Apparatus and Systems, vol. PAS-93, pp. 1700–1705, 1974.
67. H. J. Elfring, M. W. Davis, R. D. Swanson, K. E. Voigt, ECAR Transmission Conductors-Loss of Strength Due to Elevated Temperature, East Central Area Reliability Coordination Agreement, Report No. 74-TFP-37, May 1974.
68. L. R. Jackson, A. M. Hull, A. D. Swope, The Comparative Properties of Several Types of Commercial Coppers, as Cold Worked and as Recrystallized, American Institute of Mining & Metalurgical Engineers, Technical Publication No. 2274, Sept. 1947.